Daystate Wolverine R reassembly

[@maddogbeckett1880]

Excellent video as usual. It’s a shame Daystate don’t supply all the correct O rings in the kit including the ones required for the Huma. It would also be helpful if you listed the O ring sizes and locations.

[@DaystateLtd]

Thanks for your comment - for all technical enquires please visit our technical support page on our website.

[@geoffhaylock6848]

Thank you for the video. Very helpful.

[@davidmackee8575]

Great video thanks

[@nigelczuchraj4517]

Useful video could be a lot better if you stated the part number for every o ring you are fitting! That way when someone does his own seal change he will know which o ring goes where especially if there are similar size o rings to be used!

[@DaystateLtd]

we only sell orings as a kit for £10.50 I think you can undestand why. On the new acompanying handbook (coming soon) there will be all the oring sizes so you can sorce locally

[@steveblaylock8662]

Great video, where can I get the anti tamper bit ?

[@DaystateLtd]

Thanks for your comment - for all technical enquires please visit our technical support page on our website.

[@klane7]

I have a wolverine with a tube cillinder and when trying to pressurize it after a changed all orings and new valve it blows air true the barrel. Any suggestions? I allready pushed the valvepin in and cocked the rifle so the hammer does not touch the valvepin. Everything sits right in place....

[@DaystateLtd]

Thanks for your comment - for all technical enquires please visit our technical support page on our website.

[@alanmullock381]

Excellent 👌👌👌👌👌👌👌👌👌👌

[@Juniantobaka1]

Mantap

[@anirudhpanwar6202]

Where 2 get the degassing tool from

[@DaystateLtd]

Thanks for your comment - for all technical enquires please visit our technical support page on our website.