Dayton Audio Reference Wi-Fi / Bluetooth Soundbar | Arylic Amp | DIY | Walnut Hardwood Metal Legs

The Bar - Walnut Hardwood Custom Made Soundbar using the Arylic Up2Stream AMP V4, Dayton Audio 4" Reference Series Woofers model RS-100 4 ohms and Dayton Audio 1 1/8" Soft Dome Tweeters model ND28F 6 Ohms.
U$ 350.00 Approximately cost for parts in the USA
MATERIALS:
Maple Plywood, Walnut, Metal, Drivers, X-over Components, Connectors, Ports.
Walnut hardwood case with Plywood front baffle and rear baffle. Finished with Good Stuff wax. Steel Metal modern legs treated with Evaporust, primed, painted and clear coated on matte black.
LINKS:
EUROPE:
Dayton Audio RS100 Full-Range driver:
ndt5.net/c/?si...
Dayton Audio ND28F Soft-Dome Tweeter:
ndt5.net/c/?si...
Arylic Up2Stream AMP V4:
ndt5.net/c/?si...
Ports:
ndt5.net/c/?si...
Sonic Barrier:
ndt5.net/c/?si...
US:
Dayton Audio RS100 Full-Range driver:
www.parts-expr...
Dayton Audio ND28F Soft-Dome Tweeter:
www.parts-expr...
Arylic Up2Stream AMP V4:
amzn.to/3RSU3Um
Ports:
amzn.to/3BLXSFi
Sonic Barrier:
www.parts-expr...
Speaker Wire - Copper Clad Aluminum:
amzn.to/3LlJbKD
Speaker Wire - Oxygen Free Copper:
amzn.to/39tNkPe
ROUTER BITS FOR FRONT BAFFLE:
5/8" Radius Rounding Over Bit:
amzn.to/3UlOnUx
1" Radius Rounding Over Bit:
amzn.to/3QQjt3v
3/8" Rabbeting Bit Bearing Set:
amzn.to/3Bsa2lh
MEASUREMENTS:
Speaker Outside - 13.6 x 106.8 x 27.6 cm
Box Internal - 38.2 x 9.8 x 24 cm (each side)
Box Volume - 9 Liters aprox. (each side)
BASIC TOOLS:
Plam Sander: amzn.to/39wtgvy
Compressor: amzn.to/3wAxB90
Nail Gun: amzn.to/3LrlYqm
Circular Saw: amzn.to/3yNB7Ql
Drill Kit: amzn.to/39osBMR
Drill Bits: amzn.to/3llbApI
Screwdriver Bits: amzn.to/3MmMgLS
Router: amzn.to/3wyyHCb
Router Circle Jig: amzn.to/3MuZLcw
Router Bit Set: amzn.to/3FRFriK
Clamps: amzn.to/3FR9IhO
Quick Clamps: amzn.to/3FSRufH
Soldering Station: amzn.to/3PCFLXk
INSTAGRAM: @sonnoradesign

[@MagnusHistorae]

Great design really... l simply love it.

[@sonnoradesign]

Hey Magnus!! Thank you my friend!! I really appreciate it.

[@denisdube8893]

Wow dude ! Never seen someone so skillful and genius 😮

[@sonnoradesign]

Thanks for the input Dennis.

[@MarekMarcinko21]

Your design is the best!

[@sonnoradesign]

Thanks Marek!!

[@leviharker]

Great design! I’ve been using those 4” Dayton’s in my office speakers running full range, you gotta point them just right to get the sweet spot. Thanks for sharing

[@sonnoradesign]

That’s right!! And they sound great! I love those drivers. Thanks for watching.

[@mauserkk98]

Nice to see you back ,great job .

[@sonnoradesign]

Good to be back! Thanks Nicholas

[@ashleysolomon246]

Beautiful design!! So happy to see another video from you 👏👏

[@sonnoradesign]

Thanks for watching!

[@SoundImportseu]

Awesome build! Thans for mentioning SoundImports 👍

[@sonnoradesign]

Thanks for watching!!

[@1Pmares]

Beautiful final product!,

[@sonnoradesign]

Thanks Pedro!

[@andreluisciscato1173]

I´am a great fan of you, talking from Brazil. I did not undestand how you made this curve finishing inside. The final appearance is fantastic!

[@sonnoradesign]

Fala André. Que bom! Qual curva? No painel da frente? Vou postar um vídeo em breve.

[@andreluisciscato1173]

@@sonnoradesign Então vc fala português!!! Aquela aparência frontal com as curvas nos cantos. Do lado de fora entendi, do lado de dentro do canto não peguei legal. Fiz um clone da sua caixa com as pernas de cadeira.

[@sonnoradesign]

@@andreluisciscato1173 saquei. Então, a curva de dentro vai ser feita pela broca da tupia, ou router. Eu tô fazendo um vídeo só para mostrar isso. Já já sai!!

[@TomZelickman]

Another great design! Glad you got it all sorted out and took the setbacks in stride. Always enjoy watching your content and hope you are feeling well. - Tom Z

[@sonnoradesign]

Thanks Tom! Good to hear from you my friend.

[@francoischevrier7668]

Love you're design and craftsmanship great job

[@sonnoradesign]

Thanks Francois!! Love this one

[@mam-audio]

This soundbar is awesome ! Super job !!! 👏

[@sonnoradesign]

Thanks Marc!

[@caide]

That is really a piece of art. I was thinking to do something like that to my daughters apartment. I just nee time for it, and working 3 jobs doesn't leave much fee time 😂

[@sonnoradesign]

Haha! Right, takes a little bit of time.

[@caide]

@@sonnoradesign BTW Have you done any videos about subwoofers? How about a nice subwoofer for music. Like Dayton Reference 10" HF with plate amplifier 😛

[@sonnoradesign]

I’m gonna make subs soon! Haven’t had the need yet but it’s on the list for sure!

[@caide]

@@sonnoradesign That is nice to hear!

[@chevyimp5857]

Great energy on this channel..

[@sonnoradesign]

Right!! Thanks my friend!! It should show in the video, during the process…

[@derekjarman1638]

Great video - the speaker looks great! Really enjoyed the music too😁

[@sonnoradesign]

Thanks Derek!!

[@arturobolanos1404]

Old School Fabrication. I love it. Art Bolanos, Houston Texas Wow Very Artistic.

[@sonnoradesign]

Thanks Arturo!

[@amparomonteiro9008]

Beautiful job!!!! 👏👏👏👏👏

[@sonnoradesign]

Thanks for watching!!!

[@pablomartinvazquez]

Excelente, Maestro!!! saludos desde Argentina

[@sonnoradesign]

Woohooo! Gracias Pablo!!!

[@mariokaldato]

Amazing job soundman master 💗💗💗

[@sonnoradesign]

Thanks Mario!!

[@PhillioDoede]

Nothing says exotic and European like Dayton "Ohio" Audio, lol. Joking aside, turned out amazing as usual, and its hard to argue with the Dayton RS series. And bravo for including the F ups, keeps it more grounded and real not to mention entertaing. Also I'm gona look into that Good Stuff wax finish for my walnut projects, that finish looks amazing and exactly what I'm aiming for.

[@sonnoradesign]

Thanks Phillip! Now you know my secret!! Xshitt. The Good Stuff!

[@marcuskrushansky6557]

Haha, i love you dude. I just got into audio a few weeks ago and found your channel, and im loving it. Super funny even tho you dont dell jokes, haha.

[@sonnoradesign]

Hey Marcus!! Thanks for watching my friend!! Cheers

[@marioromero4350]

Good Job my friend hay ya yayyy caramba

[@sonnoradesign]

Woohoo

[@arturomty9969]

wow, it looks awesome!!!

[@sonnoradesign]

Thanks Arturo!!

[@JuanFernandez-wq6jz]

I really liked the project and his skill with wood. I would like to do it but as two separate speakers without the amplifier. What do you think?

[@sonnoradesign]

All doable man. The boxes are separated anyways. Works great!

[@HobbiemasterAnesloudspeaker]

Nice

[@sonnoradesign]

Thanks for watching!!!

[@motorax.service.motociclete]

wow, great, just like factory stuff

[@alexmferraz]

The " Ai caramba " that you said tells me you are from my country . Kkkkkk

[@sonnoradesign]

That’s right!! Brazil?

[@sebastianorowski3495]

I really like your project. Can you provide details and parameters of the crossover, mainly the coils, their resistance and wire thickness?

[@hondaredrdr]

Great video! Just subbed

[@sonnoradesign]

Thanks and welcome!

[@ryanmichalski7420]

I would be interested in a diy 3.0 soundbar would you use a woofer tweeter set, or maybe a version with just full range drivers

[@sonnoradesign]

Either one works well. Depending on the full range size you will need more higher frequency bass to cover the lack of lower frequencies from the FR. those drivers play pretty well, good bass for the size. A 10 inch sub would help a lot

[@volkiruski1221]

Great work, wow....may I give a tip for inspiration; check Kinma Hypersonic soundbars (and amps and so on) they are ok and theire looks to copy, why not....

[@sonnoradesign]

Yeah. Let me check that….

[@jcrroadie]

I’m looking to building a sound bar for the bedroom television and came across your channel in doing my research. Although too large for my need your project came out wonderfully. Will you ever show anything about crossover design?

[@sonnoradesign]

Hey JC. Yeah! I’m gonna make crossover videos soon. Everyone seems to want that!!! Let’s do it.

[@volkiruski1221]

Wow, amazing, its perfect...question: do you sell builds or do you build on demand/order? Its Top, SUPERDUPER!!

[@sonnoradesign]

Thanks Volki!!! I sell some eventually. I used to make to order but not anymore.

[@nogardxd18]

Seus videos são muito bons, até to pensando em fazer uma pra mim. Vlw, tudo de bom e Deus te abençoe

[@sonnoradesign]

Valeu meu parceiro!! Manda bala que essa toca muito bem!

[@nogardxd18]

o unico problema e que aqui no Brasil, é tudo muito caro@@sonnoradesign

[@sonnoradesign]

Eu entendo. Tem muita coisa boa por aí acredito. Selenium, Bravox, não sei se estão no mercado ainda. AliExpress chega aí?

[@st170ish]

Nice work they look awesome. Did you think about adding a sub in the same box? Those Rs100-4 can go in a tiny sealed box and still sound good(obviously with a sub backing them up).

[@sonnoradesign]

Hello Harry. It plays enough bass on that box, not a sub woofer though but those little drivers are impressive.

[@janus1977]

you rule man!

[@sonnoradesign]

Thanks!

[@brianstahley1868]

Does this not need crossovers? Sorry, I still cant seem to comprehend crossovers!

[@sonnoradesign]

Hey Brian. Thanks for reaching. Yes they have crossovers. It might be in the video…? I don’t remember.

[@marcusbenigno22]

Muito maneiro seu trabalho show,meu sonho é ter todas essas ferramentas mais não sei se você criativo, mais me amarro em tools

[@sonnoradesign]

Valeu! Me amarro também!

[@miladinseratlic5984]

That was not sound from speaker but added music to video so what's the catch?

[@sonnoradesign]

Hello there! Thanks for watching! It’s a copyright issue. I can’t play my test songs on KZbin cause I’ll get a strike, but thanks for the input. I might figure out a way to capture the real sound!

[@Michael-mai]

Thank you very much for sharing this video！Very beautiful and impressive speaker. Your carpentry skills and appearance design are amazing. I have a question about the volume of the bass box and the length and width of the front panel. Would you like to share?

[@sonnoradesign]

Hello! Thanks for watching! Yes, I’ve shared the measurements on the video description. You can take a look. It’s all there.

[@Michael-mai]

Thank you so much and looking forward to seeing more of your great works。@@sonnoradesign

[@Ferdy-Perezlara]

Hola mi querido amigo, soy Fer de Cancún, me encantó este proyecto, yo creo que va a ser el primero, te quiero hacer una pregunta sobre la ma idea pero tienes un correo para enviarte toda la idea son bocinas Bluetooth varias para ambientar un recinto, un jardín etc. Sin cables, me gustaría pasarte mi idea y si es posible. Saludos y que buen trabajo

[@sonnoradesign]

Hola amigo! Podes mandar-me um e-mail que ló ajudo em el projeto!!

[@Ferdy-Perezlara]

@@sonnoradesign hola Bernardo, busque tu correo, pero no lo encontré, hasta en Instagram lo busqué

[@sonnoradesign]

Hola Fernando. [e-mail]

[@ademiltoncordeiro1867]

Curto demais esses projetos, de caixinhas de som Bluetooth mas não sei o que significa DIY.

[@sonnoradesign]

Fala Ademilton. Diy significa Do it yourself, faça você mesmo em português! Valeu por assistir.

[@chevyimp5857]

Hey.. how did you achieve the internal radius on the front rebate?

[@sonnoradesign]

There is a video where I show exactly how to inlay the front panel!! Check it out!

[@bionicbob1285]

Can you post the crossover schematic? Cant seem to find that

[@sonnoradesign]

Hey Bob. It’s at 26:34 min in the video!

[@AndySicas-qr7tk]

Soundtest?

[@sonnoradesign]

Hm, this one is gone.

[@Giuseppe-Forte]

Could you share your drawings?

[@sonnoradesign]

I don’t have it on 3d cad yet. I’ll have it one day hopefully.

[@chevyimp5857]

Sorry it's equal to the rebate cutter rad..

[@threepe0]

what's a plam sander? 😆

[@sonnoradesign]

It’s that random orbital sander that fits in your hand. Like a flatter one.

[@threepe0]

@@sonnoradesign that’s a palm sander. Was just having a giggle at the typo in the description

[@sonnoradesign]

@@threepe0hahaha. Double typo. Shoot!!!

[@K.Vereen]

Sorry I don’t think so. Why not just speak in a normal tone? I can’t sit through it all SMH

[@sonnoradesign]

Thanks for the input.