56 Chevy Shop Chandelier. WE HUNG IT FROM THE ROOF!

[@kevinwright1551]

The truck is looking awesome as ever. I love it how it's lowered too. Keep up the great work.

[@joshfroese8033]

I like how you needed a work bench next to your truck on the lift, so just bought a car with the largest hood ever ! Haha two birds stoned at once ! Love it.

[@EricVanDorn]

for spits and giggles, I scanned "Princess Auto's" website, they have a couple choices of workbenches that could end up on wheels....

[@CaseyMcGowan-f2i]

I know you hate doing it , but fans love watching you do body work and paint. More please

[@bradellis3261]

Tack in some metal under those fender eyebrows , then pack in the fiberglass bondo. You have that fancy new 8" sander and it's been awhile since DD has done a paint job. Even a one day slam , but it'd be one color. TCP Global has a gallon kit, single stage $210 (US), olive drab or glossy black. Great to see you re-purpose a running eng/trans. Not all of us can afford the full tilt rebuilds. Love the show

[@Robert-ni6ut]

The look on Dannies face when she came down the stairs she's like oh my theirs truck parts hanging from the celeing lol 😂

[@mikebroszczak5767]

The sheet metal repair looks great good job Dan.

[@WoodenSteel-J6artisan]

Nice shop you two…. Good move, what the hell GO HAVE FUN. Every guys great dream, a shop with an ECHO…. Im anxious to see you fabricate the front fender connections-

[@budlanctot3060]

Many years ago, my (now late)BIL drove his '58 or '59 Chevy pickup up from Seattle to Anchorage on the ALCAN. He only went 50 miles on the ALCAN when he broke one of his front shocks. He broke all the rest in the next 150 miles. So, I'm guessing the shocks are a potential failure point.

[@vwbyoy88]

Always loved the round body trucks. They all look so good Hot Rodded out. Dan is going for Mild Ratted and I love that too.

[@billlanoue3044]

Nice truck I wish I was closer. I would’ve liked to have built you wooden bed. We have rough cut fur here that would’ve been amazing.

[@brucejr.5833]

Cab corner replacement is something we will all be doing on a project truck. I really appreciate it watching you do this. Never change man. And always keep Danni close... She's a keeper.

[@combustion-junkiecustomart8083]

Man, you are the definition of "just get it done!"

[@shortcutgarage]

I dig the stance you’re going for! Can’t wait to see how low the front drops with the drivetrain installed.

[@daniellebrindisi6378]

Watching that box hang was awesome lol Please paint the truck it deserves it 😊

[@BigBlock-wf3mh]

Another great episode from the DD Speed Team, thanks guys.

[@PaulJFleischer]

One thing I learned from mixing paints is that they generally dry darker than when you apply them.

[@charlesledbetter1912]

I really like that truck. Thank you for all of your video's. Love your channel. Both of you.

[@darwinfoster7420]

Please paint the old girl it will make it look so much better.

[@budlanctot3060]

Turbo can it.

[@henryallisonsr8318]

Just want to say hi to Daniel and you and I hope you are having a great day. Dan I hope you do a good job on the truck and maybe put a nice paint job on it. God bless keep up the good work and have a blessed evening and night

[@magoo50tv7]

Dan, raise the bed floor a fee inches. I really enjoy all your videos!

[@hammacks4]

Maybe if you put some bushings between the bed and the chassis, that might give you the clearance by the differential.

[@stanleyadamko957]

Dan, run a pair of side pipe stacks in the stepwells of the box against the cab..🤔😉

[@EricVanDorn]

After you remove those steps you just spent so much time on...lol

[@KevinKaufhold]

That truck's really coming along. Most of the original paint should buff out to a decent shine, but weathering the cab corners would look good too.

[@clasicradiolover]

You could bring the bed up a few inches where the back of the cab seems to indicate it should be. That would help clear the rear-end.

[@duane-q9t]

made my day again ---Thanks Dan and Dani

[@alsmidlifecrisis8765]

I love that monte carlo. I've had so many but never a first gen, and I've always wanted one. What a deal you got on that

[@rabidcoyote97]

It looks awesome! She’s begging for a 6.0L LS!!

[@sleepervega71hill28]

And. The headlights look great and the crown's over top looking decent

[@sleepervega71hill28]

Of the Truck. I've embarrassed myself by speech. Fartusay...!

[@greggsvintageworkshop8974]

It looks really good with the new stance Dan! That touch up paint looks pretty good too!

[@michaelsimerly8436]

Danielle, this should be your glitter truck!

[@markschroeder346]

Looking forward to seeing it done! Will be cool for sure.thanks for letting us go along. this will look good trailering the drag car to races. .

[@ericfallis6202]

Hello Dan and Dany I use a quick squirt of kroil in my air tools works good and I've found they last longer 😊

[@TheInternetSaidThis]

You work your ass off, then pivot to the garage and provide content for all of us to enjoy. I hope you are taking some time for you both to enjoy your successes.

[@JenkinsVintageIron]

Love seeing progress on the truck. Hoping to make some progress on my 57 truck soon.

[@4ndy530]

You don't need to worry about the bed falling from the ceiling! 😂👌

[@donh8973]

Thanks have a good one

[@shanewright6958]

Here we go again. Let’s gooooo 👍👍

[@franklindner8259]

The hour goes quickly. Some days more is accomplished than others. Good work.

[@erichuff2538]

She looks good.

[@ClemBunce]

really starting to look even better. I'll keep watching, keep it up.

[@beefstew5608]

Man I did a bed floor in a 56 Chevy last year and I don’t wanna do another one haha. Built the box after someone completely disassembled it. Fun stuff!

[@darrenbridge7159]

That's a cool truck. We don't have many of those down under.

[@rongladden809]

It all works out in the end,great job

[@MikeLutz-e8p]

GREAT JOB ON THE TRUCK. KEEP UP THE GOOD WORK.

[@number7__879]

Yes Sir!!!

[@rayoliver7120]

She had me busting laughing when Daniel sad "dumb ways to die" ..😅

[@suecobandito8954]

Good look lowered. Rubber bed mounts (not too thick-hockey pucks), will give it the perfect height. Turned out great. Nice work.

[@ChristoThomson]

Dan, those front leafsprings were designed for a 600lb+- 235 versus a 400lb+- V8 that you want to install. So it will be a little nose up.....

[@HorsepowerHeadquarters454]

Do the whole truck in that color.

[@BarryMcGraw-z6b]

You are really taking on the Alberta culture Old pickup for work , Fancy pickup for goin' to town, c'boy hat, c'boy buckle, boots, no horse. You're Albertian now congrats.

[@Elvisinmypants]

Judgyjudgerton

[@xozindustries7451]

Woot and also Woot!

[@5798Mike]

Cool truck 👍

[@VATION3RD-GEN-X-GARAGE]

Dan bring a little paint sample of the truck do the paint store and they have a paint color code gun that they can mix the match that old weathered out paint get a quart event in just base coat no clear coat needed and get a cheap cup gun and spray all those bare metal parts and those cab corners with the just base coat green and it'll matche the rest of the truck and after it's dried then you can take a green 3M pad and scuff it up the match the rest of the old weathered paint...

[@staceyhetland]

About 55 years ago east Glacier park hotel co. garden crew had a 57 PU, it was red same box with a spare, they look sharp

[@sleepervega71hill28]

Hello Dan and Dani. ! Glad to have time/take time to holler at you. "In the words of a great musician. "Still loving Youuuu.. two!...

[@norm-nas]

Once you get an engine in if the front is still to high you can flip the rear spring rear shackle mounts over and that will raise the pu 1.5 inches.

[@bensymington5550]

❤❤❤ love your videos awesome content😊

[@edpoell2876]

Brand new bed with chrome retainer strips, will drive you nuts if you don't paint the whole truck, even just do it over in tractor paint. Hope every other little thing is okay in your world guys, keep up the great work you do together!

[@johnroof2663]

Build it the way you want it, Danny.

[@JamesWebb-x9n]

Nice job man

[@Lernca]

Looking pretty good, nice work!

[@Tim-57]

Hey Dan&Dannie Truck is looking great so far. Take care 😊

[@jeffsratsrodsrebuilds1535]

I like it lowered

[@janhenkvandergoot9793]

Brand new video greating from the netherlands

[@SBGHTEACH]

Nice Monte Counter. That lowered rear stance is very niiice! I am a Ford guy but dayum that truck looks sweet!

[@bobclark5479]

Good for you.

[@aprilhilliard3302]

Golly, we just love all your stuff! Great vid, great truck, and Dani totally rocks!

[@EricVanHorn-n8e]

I'm looking at the truck when you put the box on and thought wider tires and rims on the rear and low and behold dan agreed with me. Set of cragers would look sweet. Or widened steelies would work. Your down the rabbit hole might as well go all in. Dani, we like your looks. You have that girl next door look to you. Way prettier than the make up barbie dolls of the world. Keep on schmooin guys.

[@yobentley7274]

Cool looking truck, I like it.

[@BudFranks-fu9ye]

You still look amazing Dani👍

[@gregpomeroy2149]

Shortening the front bumper would look good. That hoist is handy for sure.

[@chuckelliott3894]

My friend you can use ATF for air tool oil also

[@CrazyWillie01]

As Always you 2 , I’m lovin it . And if I can find a 55-56 truck ima do the same after the 2 dr wagon . Nice work guys

[@marctorigiani4558]

Good idea sir definitely shine juice it that'll make it match a lot better

[@1944chevytruck]

AWESOME!

[@gregorygibson5455]

Hello Dan and Dani

[@richsmith6952]

She looks pretty good! Truck isn’t bad either! ❤️😎

[@alanhargrave6992]

We used to paint those old trucks with a paint brush or a sponge roller they looked very nice 😊.And no one would steal them .

[@lukasgarage956]

lol.....I just painted a 82 VW Derby with brush and foam rollers.

[@brianhaw9398]

Could you use a few drops of atf to oil your sander? Just asking?

[@gordonwalker8003]

D D speed shop garage . Told you one day find the old truck being 50-60 bady . The Monte Carlo was a through backs .cool year 70-72

[@1974novavision]

Mint! Dan. You're going to make this truck a cherry. It's worth it, just look at that body style. So tough, but yet pretty. Thanks for the video

[@apere003]

thats an awesome truck

[@saublesurfer8197]

Wow truck is starting to look pretty slammed. Even the intro picture shows that. Danni won't have to step up to get into it. Might have to airbag it to drive it. .

[@SchneiderClassics]

right on, and make sure not to lose anything else that doesn't;t come shipped

[@timmemmott3720]

I think it sets good put the steps on so you can get inside the bed .

[@robertc1433]

Looking good

[@1582hunter]

Must be MacDonalds cause I’m lovin’ it.

[@josephknowlton7246]

Liked, shared and commented. I laughed so hard when u said pumpkin is close.😂🍻🗽🤴🏻 39:55

[@ronaldhellengreen7063]

Lowering the truck made it look a lot better. To bad you don't have a driver's side rear fender that doesn't have the spare tire. They look a lot COOLER without the spare! PEACE ✌️

[@Jim-qz8wc]

100% better

[@redwinstead7873]

Dan you are doing the right thing with the truck that’s how I did mine to the same way all but where the spare tire. Make it look like the other side okay make both fenders the same way ❤❤❤❤❤❤❤

[@cudaman-yq7pq]

The cab corner and lower fender repairs turned out great, and the paint matches well enough to fit the theme of the truck - Recharge your batteries and do that level of work on the rest of the truck and you'll end up with something special, IMO. :>)

[@justinfobare]

Well. If the small block doesnt drop the front, you could jam a big block in there. A blower would give the front some more weight

[@staceyhetland]

Needs red steelies & dog dish center caps

[@bobsch-gd6ze]

3rd warmest January in BC in a very long time. Three inches less than average rainfall for January in BC. February hopefully chnages some of that or the summer is going to long and Hot... Peg Approved would need a 7.3L and some dump tires to be Alberta approved ;)

[@scottdavies3914]

fwiw I had to raise the bed up on mine, just welded 1x2 box tubing all around inside of box , got it done in four hours really simple…

[@striving2bebetter]

Great job on the truck wish you we close to me I’d let you finish mine lol

[@strdnutz]

Reverse eye springs in the front will set er right

[@acewarren1957]

Late 90s-early 2000s small blazer rear end has disk brakes factory

[@VATION3RD-GEN-X-GARAGE]

Dan that's a 8" Bondo Buster DA Sander...

[@PaulPreston-qw1yg]

Green truck getting sharper everyday good job Daniel