Another Mystery box of broken tools in for repair.

Nothing exiting about this mistery box.
Only 2 machines inside of it, but luckily there is still loads of other machines to do.
Bosch grinder what won't start
Marcrist core drill DDM3 that won't start.
Bosch 4inch grinder that won't start.
Einhell sds drill with a sparking motor.
Hilti impactor SID 4-a22 that won't hold the bits.
Dewalt 4 port charger now working.
Dewalt DCD100 drill that's changing direction.
#dewalt #marcrist #Bosch #charger #dewaltcharger #toolsrestoration #toolfix #tools #diy #repair #makita #powertool #repairs #powertools #toolrepair #deandohertygreaser #deandoherty #asmr

[@Adam_Lynn]

£250 dewalt battery charger and they can't even be arsed to put any dust filtration on the intake fans. Built to fail!

[@sergaljesus]

The best time of the day... tool time

[@gutsngorrrr]

Ha, The good old No Blow fuse installed.

[@julesrippmann1523]

Had a good laugh, when I got what was going on 😅

[@michaeljohnson4636]

I wonder how many amps it will take to blow that fuse 😮

[@Adrian-l1l7e]

@@michaeljohnson4636about 13000 amps 😂

[@Matt-ns2ty]

​@@Adrian-l1l7eJeez 😂😂😂 safety first I guess

[@tdotw77]

18:26 😮That fuse will never blow! That sure beats the old foil wrapping trick!😅👌🏻👍🏻⚡🔋🔌

[@Stevos-Corner]

Thanks for another great on Dean

[@ElMariachi1337]

That customer got lucky on the Dewalt charger, if it hadn't been the lead it would have been game over, the boards are glued all over, even removing the boards from the base is nearly impossible. Tried it once to see what I could come up with since it wasn't the lead, but never ever gonna be bothered with it again.

[@ToolTimeToday]

Ohhhhhhh i'm so glad i didn't get one of those anniversary DeWalt drills when i was offered one. My local tool shop wasn't going to stock them, But the dewalt rep they deal with BEGGED them to get them in, So he reluctantly did against his better judgement & instantly regretted it when he compared it to another model he found it to be P**s weak. so didnt convince me to get one even though it looked good at the time. Loved the video as always, Thank's Dean.

[@TempSFugit-kk1dk]

Read my mind, Dean- thanks for explaining that 'security screw'! Hadn't seen/heard of them before. Greetings from California!

[@thedogbarber]

We need t shirts that say "Thats her!"

[@AnthonySmith-hr2kp]

Nice job Dean. Box-O-Tools repairs

[@garyallport18]

Happy to learn to drill holes to get brushes out..also what I do if aI cant get replacement caps I fill the holes with epoxy and when its set use a flatend screwdriver to recreate the screwdriver groove

[@plunder1956]

That Final DeWalt drill looks powerful and nicely short, brilliant for working access. I bet that switch is hard wired so it can't even be replaced. Total failure by design.

[@deandohertygreaser]

It is!

[@jasonvandervalk3679]

Ive owned this Dewalt charger since December of 2021 a very good charger.

[@JohnSmith-fd6nb]

I always enjoy watching your work Dean, so ASMR for me :). Greetings from Australia.

[@animal79thecat]

That Dewalt "100 Jahre" drill is an insult to loyal customers!

[@xxspawnxx]

what amazes me , is how often its a easy fix that takes minutes ... so many wasted tools . lol

[@5FDP666]

0:58 swear you just said "Hawk Tuah" 🤣

[@Howt-ooo]

Love from Ballymena 💪 35:00 i have that drill. On my second one, took first back to screwfix. The direction switch would go the wrong way randomly! Latest one been ok so far.

[@neilbes1]

Cant believe you didn't even flinch when you opened that plug to reveal that mig tip. Does the wire size of the nozzle denote the blow rating 😂

[@arshadbangash]

Liked the fuse on the bosch grinder

[@bumpkinrocks]

Those Dewalt triggers 😂😂

[@austenj4539]

I like the fact that the Hilti impact driver can be fixed by "dropping the ball".

[@darylhudson777]

Maybe some people would call me picky but maybe I'm more of a perfectionist and so that Dewalt drill with the broken locator tab I would have sent back to DeWalt. People are getting paid good money to repair these tools and if it was my job I would want to take responsibility for not doing it properly. As a customer I really wouldn't want my drill coming back with a broken tab. Maybe it's more the principle of the thing, but that's the way I roll. From what I've seen in your videos and others... if DeWalt doesn't get their act together people are going to stop buying their products and the same goes for any other company that offers poorly designed products for high prices.

[@chriselliott726]

I agree, as soon as you open it up you take responsibility for the repair. As a warranty fix it needs a new shell.

[@Bugsyerin5646]

Poor Dewalt................ one day you will like them.

[@steveo4031]

Your so good at your job

[@thefakemaker]

Not too long ago Einhell was sold in Australia as a “premium European” brand. Now they’re Ozito

[@cpzmelbs]

First time hearing that. Were they exclusive to the green shed? Who was making Ozito at the time?

[@thefakemaker]

@@cpzmelbs it was stratco of all places. I don’t have a big, green shed within 400kms and when I started renovating my house the Stratco team were all recommending this premium stuff from Germany, Einhell.

[@Zogg1281]

"Well, it's not the fuse, it's well hard to blow a mig welding tip!" I laughed so hard, but it was one of those scared kind of laughs where you can't quite believe that someone it quite that stupid!!! Now I understand why some companies won't allow their employees to "fix" tools 😅

[@Zogg1281]

Einhell are actually producing a "Professional" range of brushless tools now. I have checked and that is proper Professional not professional DIY crowd. It means you can get 3 year extended warranty + 10 year warranty on the brushless motor!!!

[@jankas64]

Love your vids and i learn alot. Though please check box the fastner for the disk is still in box if you didnt see it. I dont know why it wasent fastened on grinder. Take it easy and do what you do best repair and teach us😊

[@bogdan_d82]

I was just about to buy that Anniversary Edition DeWalt, i was testing it , when the sales lady jumped me, so i left the shop and went to play with the red team , finally i got the cheapest Milwaukee i could find M18 BLPDRC, so far so good 😊

[@Deathless2288]

Easy money for you with that kind of fuse in the tool!

[@daverichmond2846]

Ok,so. For a second there l was certain that “ fuse” was a 9mm bullet.

[@daig1984]

Like you said the other day, no leads for ages then all of a sudden 😅

[@Heisenbergmercs]

Dam i bought my son that dewalt combi

[@deandohertygreaser]

Get it registered for the 3 year warranty

[@Vanman_fr]

Also The dcd100 is bad but the other compact drill the dcd800 is a great tool and i recommend you guy consider selling them.

[@sleepyash5730]

ah yes the million amp fuse love it lol

[@plunder1956]

I once stripped down an old Power panel in a factory in Sheffield with huge motors & a power forge you could feel through your legs on the stone floor. Each ceramic fuse was 8 inches long and 3 inches in diameter that welding tip had a higher capacity

[@sleepyash5730]

@@plunder1956 😭

[@Padraig123]

Einhall just recently bought Ozito. Which was started as Ozi Tool Co

[@tomalley798]

Einhall 😆

[@HiroCreates3747]

That's too bad about those Dark Mode Dewalts

[@Padraig123]

Milwauki,AEG. RIGID, Ryobi and many others are owned by TTI industries, a hing kong based coy

[@firebladex8586]

Ryobi is owned by Emerson. TTI is licsenced to make them for Home Depot

[@lewiskelly14]

Would have been nice for you to have given the price of the Hilti kit

[@georgedavall9449]

LMAO @ 0:15! Indeed!

[@darylhudson777]

What was wrong with the switch in the DeWalt DCD 100 could you possibly take one apart to look ? I know you've done this in the past with other switches. Maybe it would add to the long list of knowledge and help in the future. 👍

[@pokershopmexicocarpinteria4553]

Its no the first time did i see Dewalt drop the ball

[@eoinwalsh7017]

Nice few nice fixes there out of a mixed lot.What pliers are you using at 3.28.I cant seem to find them anywhere.Thanks

[@refactorear]

Been years since I saw a spanner head in screws. And heck that anniversary Dewalt drill is awful!

[@walterbwd]

35:05 the drill is sweet!.. how did they get a black one??

[@monguire22]

The dcd 100 DeWalt drill if warranty replaced the switch will the fault go away or keep happening?

[@cristo844]

It keps happening...I have another model in my whork it the same problem,reverses direcion! It Was repaired in warranty and lasted 2 weeks!

[@thorfrun8959]

I've had 2 Marcrist drill in for repair recently and i cannot get parts for them

[@The-four-o-five]

This channel really turned me off Milwaukee and DeWalt :D

[@deandohertygreaser]

good, milwaukee is only for mechanics anyway and dewalt is going down hill fast

[@tomalley798]

Hi Dean. Did you ever find out the Retorque for the Eibenstock core drill clutch. Mine keeps slipping and won't drill. no one here wants to touch it as there are no parts out this way of the hemisphere.

[@deandohertygreaser]

I put the last one to 15nm. And haven't had it back again

[@EnergyTechre]

@deandohertygreaser how come you have 120V stuff in Ireland?

[@Fergie6366]

Aye but what is the rating on the welding tip

[@Padraig123]

What do you think of A.E.G. and RIGID tools Dean? Use them here in Australia. Reasonably priced with 5 year warranty and 3 year on batteries

[@samdavies1752]

Doubt he's come across em, impossible to get a hold of in the UK/Ireland it seems. They're the same company as Milwaukee and Ryobi though, so doubtful they're that great for repairing

[@alouisschafer7212]

Standard offshored made in china tools. Seem decent in quality.

[@HogeN1337]

aeg is middle of ryobi.aeg.milwaukee since all are from tti

[@ffftube-le8np]

Aeg been good for me for a few years now but I'm not a builder. Only aeg tool I dislike is their orbital sander, not easy to handle like other brands. Also skillsaw could do with more power.

[@jacobkirmes-daly8867]

Great vid. Do you have a website/contact info to inquire about sending a tool your way? Thanks

[@deandohertygreaser]

afraid not. im only doing reapirs here for a local hardware shop and cannot take in any more sorry

[@woodandtools46]

la meuleuse gws24 230 a une vis défaite sur la tête du renvois d'angle, c'est visible a 5min 28, j'espère que tu l'as resserrée :😱😱) sinon tes video sont pratique pour réparer mes outils

[@Matt-ns2ty]

Hi Dean/everyone Quick question Do you any idea of how to get a model number when a tool is rebranded by another company. I have got a Facom nut gun which is powered by dewalt battery and the nut gun look a lot like the dewalt one but i can't find the model number ? Any ideas ? Thanks in advance

[@waynemccammon6992]

Did someone take a strimmer to these leads

[@jernejloknar8011]

Dewalt must have fired all the quality control people and replaced them with AI.

[@EnergyTechre]

I heard Milwaukee hired a lot of their engineers some 10 years ago. I am not sure this is true.

[@jernejloknar8011]

@@EnergyTechre is it not the same company owning both brands - tti?

[@charlieengland9217]

I love those wire crimper/ cutters do you have a tool number?

[@The-four-o-five]

no longer made

[@tdotw77]

Yeah I don't see them anywhere anymore except possibly ebay, but they're wiha insulated offset crimping cutters etc(not sure #)🛠️🔩🔧👌🏻🦺

[@nelchan2421]

21:42 echs

[@nelchan2421]

21:28 fuse

[@nelchan2421]

28:48 best part 🌪

[@Orcida_1968]

Made in China 🇨🇳 😂😂😂😂 parts for the Hilti don't les long

[@tpgajtg210]

But, selling for Swiss price😊😊😊😊😊

[@cheegebvvbvvbbhggf8638]

Ohhh right got u now sorry 😂😂😂😂 how are you going anyways

[@atsimas]

Greetings. Any info on where to find this applicator? 32:29

[@carsten4719]

you mean the "Solvall Gasketfix"?

[@atsimas]

@@carsten4719 I've found it. Loctite Quick Gasket 5910, 100ml

[@HogeN1337]

17:28 ^^

[@cheegebvvbvvbbhggf8638]

But I am doing great 😊😊

[@IsadoreSiteman]

why does ireland use such a klunky 120VAC plug. Why not use something smaller and more scaled to the cord like they do in the US?

[@deandohertygreaser]

We use 240v here. These 110v plus are for use on building sites. Power used on building site has to be dropped down to 110v using transformers. So the plugs are built to a heavey duty and safe standard to withstand site use

[@ElMariachi1337]

These are plugs used in construction sites, in NL we don't have the 120V versions, but we do have the same ones that are being used for 380V/16A.

[@AlexKall]

@@deandohertygreaser Why are the building sites running 110v instead of 240v, if you know? I'm curious.

[@alouisschafer7212]

The US plug is objectively garbage. The CEE system is the way to go.

[@IsadoreSiteman]

@@deandohertygreaser Thanks for the reply. i believe that the 120VAC plugs used in the US are just as safe as that large one you use. i worked on commercial construction for 8 years, and never saw any problems with the heavy duty plugs used thee, and as a biomedical technician in a government hospital for 33 years. Never had a problem with those plugs either (both push straight in and Twistloc. It's just a matter of what the government says it will accept. Thanks again, and I really like watching you, an extremely efficient technician, doing a job right and quickly. I also appreciate it when you do a ROI on a repair! I hope I say this right, and mean no offence Éirinn go Brách.

[@Kliker-wc3ut]

Hello, I have a dewalt drill Dcd710 brushed 12v machine. I bought a brand new original switch and it doesnt work, the output voltage is 0.5v and the switch heats up as soon as i start it, it wont let 12v trough no way. It blew the diode on the bottom, I can replace it no problem but it the switch doesnt work and my seller doesnt want to give money back, can somebody tell me how to fix it, i Have basic electronics knowledge

[@garyallport18]

More tha likly your controller is bad

[@Kliker-wc3ut]

@@garyallport18 it doesnt have a controller, its a small 12v machine with just the switch and motor

[@ElMariachi1337]

I can only refer to my experience with Makita brushed drills, but this might be your issue aswell: Makita switches can only be connected in one way which means the red wire (+) comming from the battery connector has to go on the plus and the black wire (-) will have to go on the minus of the switch. If these are twisted, the switch will burn out the moment you put amps through it.

[@Kliker-wc3ut]

@@ElMariachi1337 thats what I was suspicious of, but the switch is brand new and original, i tried switching the polarities from my battery by wires and connecting it to the switch but Im still geting no voltage. Im sad because this has already costed me way more than it should of and one more switch is 25£ and Hope to God it works…

[@fugelkusch3722]

There's a channel called "NM2255" and in its latest Bentley video the guy pulls out a handheld Makita ? turbine to extinquish the exhaust of the car after the start. Ever seen something like this in the wild or is that an invention that is only available to the faster ones of us?

[@ElMariachi1337]

Don't know the channel but I can only assume it's a Makita DUB362 leaf blower. They use them in F1 to cool the brakes. And yeah it's a fairly common garden tool actually. There are even a smaller ones these days: DUB185 and the most recent one is more of a dust blower: DAS180

[@fugelkusch3722]

@@ElMariachi1337 Just googled the ones you mentioned and this one is totally different. It literally looks like the back of an airplan turbine.

[@cheegebvvbvvbbhggf8638]

Just a question I'm not being rude or anything but I don't really like the word hell I reckon it to me to bad word but other than that I just want to let you know that I love you very much and I always watch your videos😊❤❤

[@deandohertygreaser]

Actually, when I say that, it's a polite greeting used among friends here. The normal greeting that we use is 'how the f are ya.' But I'll try leave ir out

[@db146]

@@deandohertygreaser We like "how the f are ya." more. Its a men´s channel, no catering for the kids.... Never loose your charm to keep other people happy.