Doorbell not working, How to fix it. (2022)

ABOUT THIS VIDEO
If you have a button style doorbell and it is not working, I will show you how to fix it. If you press the button and the doorbell does not ring or the button itself is damaged, I will show you how to fix it.
********CLICK TO SUBSCRIBE****** kzbin.info...
-------- Tools and Parts Used In This Video -------
Digital Multimeter: amzn.to/32FVZY5
Makita Drill: amzn.to/3lW6387
Doorbell complete kit: amzn.to/36Ckisv
Doorbell replacement button: amzn.to/2MHGL0d
Doorbell Transformer: amzn.to/3tncuVd
Doorbell Chime: amzn.to/3aqwQEn
Screwdriver Set: amzn.to/39Gd7l9
0:00 Intro
1:22 Review of Doorbell System
3:22 Replacing the Button
10:37 Replacing the Transformer
15:19 Replacing the Chime
19:15 Outro
--------Cameras and Gear Used To Shoot This Video ------
Nikon D750: amzn.to/2VUxXGV
iPhone XS Max: amzn.to/2Iu4Ty6
Canon VIXIA HF R800: amzn.to/33aZeqg
iPhone 6 Plus: amzn.to/3cJEmKX
Neewer 660 Light Kit: amzn.to/2v6zkqW
Neewer Dimmable Light: amzn.to/2VZiiWW
BOYA M1 Lav Mic: amzn.to/38CXKpR
BOYA BY-WM2G Wireless Mic: amzn.to/2vQVw8T
DJI Osmo Mobile 3 Gimbal: amzn.to/2xj08F6
JOBY GorillaPod Tripod: amzn.to/2TyxwAm
Tripod: amzn.to/2vRhxEA
-------FOLLOW MY CHANNEL------
Facebook: deaninityourself
Instagram: deanin_it_yourself
#DeaninItYourself #DoorbellRepair
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!

[@theresalindo9081]

Love the merch!! Can I get a T-shirt too?

[@DeaninItYourself]

I will soo be releasing the merch.

[@Sebastian-dx2xg]

So once there’s no low voltage coming from the transformer you took off the wires line side (120v) not knowing if it was hot or not. That’s a no no. Im an electrician but a lot of people on here are novice. Good way for them to get shocked. Always locate the breaker and shut it off for safety reasons. Make sure you check the wires with a volt meter. Also never use an impact drill to tighten the screws for the transformer. Easy was to strip the screws.

[@randallreynolds]

Completely agree. Start taking wire nuts off without switching it off at the breaker? Someone's going to get hurt with this video.

[@matty4381]

Disturbing video indeed. im thinking the "novice" is the one who made the video. As Sebastian pointed out , too many mistakes from no warning of electrical shock to wrong choice of tools for the public even improper diagnostic procedures...

[@WolfieLovesDaddy]

If you watch his videos he is always working around hot lines without killing the 120. It's definitely cringe worthy.

[@jenb.1889]

Sebastian...what does is mean when you have to hold the doorbell button down for it ring completely. If I just push mine in like you normally would it doesn't ring. It has to be long pressed. Hopefully, you answer. Thanks.

[@WolfieLovesDaddy]

@@jenb.1889 take the button apart and clean the wire ends inside so that your contacts are clean.

[@OREvilleRed]

I've been searching for my transformer for months.... Never thought to check BEHIND the chime!

[@geraldfine9559]

Thanks!! I watched your KZbin video. Went to the local hardware store and spent $4.07 and replaced my doorbell. It made me feel a lot better since it cost me $180.00 earlier in the day to have a plumber install a wax ring under my leaking toilet. Something I am sure I could have done for $8.67 if I had more self confidence. I will continue to follow you on KZbin

[@tozosworld]

kalian berhati-hatilah setiap saat.

[@glenncordova4027]

I'm glad you showed that you made a mistake. Instead of covering the mistake you showed yourself fixing it. Everyone makes mistakes seeing how easy it is to correct is helpful.

[@wendelllynch120]

I learned something. I didn't know it had a transformer behind it. Glad I watched your video.

[@georgeplagianos6487]

Knock knock all transformers are hidden knock knock all transformers are knock knock all transformers are hidden in a chime box. Ours are in the garage with supplies power to three bells. And our voltage is just 16 volts here in New York

[@florencedelvalle8145]

Thank you for the instructions. I was able to fix my doorbell by changing the button just like you demonstrated on the first step. It cost $4.98 for a new button at Home Depot.

[@bellamiranda7966]

Thanks so much! The tip on joining the two wires to confirm whether it's the button or not, greatly helped.

[@elizabethestrada5535]

That was the best training ever... I'm still smiling Thank You Dean

[@DeaninItYourself]

Glad you enjoyed it

[@markv7261]

Your the first to make it simple and understandable, THANKS

[@DeaninItYourself]

you are welcome

[@vernonjohnson1147]

Great job friend. I like how you got straight to business and not having a "commercial" before you start.

[@dominicdye7980]

"commercials" are how they get paid..

[@Don_Izzo]

This video helped me immensely! Thanks for the great content!

[@jackokpoyo1046]

Great video. I appreciate it. Thank you so much.

[@itzmint]

Great video! Love all the little details!

[@CJ-xi5gm]

I just swapped out an old and corroded switch with you help, thanks !

[@user-rd9tj4yh3e]

Thank you, very helpful video.

[@mtz9939]

Well done and very helpful.

[@esketitethan9679]

You made a great video! Keep up the great work!!

[@phun4379]

Thanks it helped me to figure out what I did wrong.

[@juliefargo]

Should I be making sure the breaker is off when looping the wires onto the new button etc? I want to fix my door bell but I'm also not looking to get shocked or anything haha

[@gordongavin9448]

This video was great ... thank you. I had a faulty transformer AND a faulty chime so this video was perfect. Thanks for the education.

[@DeaninItYourself]

Glad it helped

[@hezron9536]

Thanks for the tutorial Dwayne Johnson! It really helped me with my doorbell issue!

[@DeaninItYourself]

Glad it helped

[@charlotteleventhal6744]

Very good instructor

[@aletango3907]

Great video, thank you.

[@greggsmith6141]

Very helpful video. Thanks

[@chetmarcotti4953]

Nice job, great presentation

[@shelleynewton2875]

Wow. Thank you for simplifying this process.

[@DeaninItYourself]

You're welcome!

[@ricktaylor3124]

Nice work! Great troubleshooting video!

[@garym213]

Thanks, big help 👍

[@melindahutchinson196]

Very well explained thank you!

[@DeaninItYourself]

You're very welcome!

[@bradmcclendon4597]

Nice explanation! Thank you sir!

[@rezakhosrowabadi7607]

Great video. Very detailed. Thanks

[@harshadpatel136]

Thanks for your great video

[@krisprad440]

Thank you very much. I had same issues. Fixed with this video.

[@DeaninItYourself]

you are welcome

[@tv43405]

Touched the 2 wires at the button and it rang thanks for the info great video. Definitely people have to know and listen that u we're working with 120v at the transformer thanks.

[@DeaninItYourself]

Glad it was helpful!

[@juanchavarria1815]

Very good instictional video Thanks 👍

[@davidadams3978]

Awesome video. Thanks!

[@sherwintaste9422]

Thank for the information

[@barbiedesoto7054]

Great video. Thanks.

[@allend2749]

thank u, u did a good job and i appreciate it so very much.

[@DeaninItYourself]

You are very welcome

[@samston]

I'm glad to watch your video . Mine wasn't working, but it only needed new batteries. Thank u, jesus

[@DeaninItYourself]

Glad I could help

[@erikgarcia3778]

Like this thanks! I’m not Into smart doorbells Id rather have have front door motion camera and an old fashioned door bell.

[@AnthonyWilliams-Photography]

Excellent!!!!

[@mrslate1]

Thank you very much, you are good at what you do!

[@DeaninItYourself]

thank you

[@qadarrizvi4607]

Thank you

[@qadarrizvi4607]

Thank you help full vidio.

[@dawgphan350]

Deanin it yourself is great.

[@DeaninItYourself]

thank you

[@gunterromeo8979]

Thank you !!

[@wolfpackz.7476]

Great video 👍

[@TheGatheringWorship]

Best "door bell repair" video on KZbin. You answered all my questions. I'm a fan now!

[@ibcwhite]

Thanks for the video! I am having problems with my doorbell buzzing because the circuit is closed and the plunger is locked in the "Ding" position...FYI, my switch is disconnect and the wires are not touching eachother. HELP!

[@RKHarm24]

We have had doorbell issues since lightning struck the pole outside our house. We lost a TV, Computer and the SKYBell video 2-way doorbell. Time to do something about it, the doorbell, after nearly 3 years. I had no clue the transformer was in the wall behind the chime. I thought they were all in the attic. You taught me something. Tomorrow I will start the trial and elimination and figure out what I do need. Thinking about going to The NEST HELLO doorbell.

[@eloisawillocks173]

Great job

[@waqasahmed903]

Very useful video. You explained it very well. Thank you so much!!!

[@hasnatfarooq992]

bhai is video say ap,nay khud thik kr li apnay ghr ki bell ?

[@JoseJimenez-me5fq]

Good tutorial it was explained very well!

[@DeaninItYourself]

thank you

[@frankchinigo907]

Nice job,I find that most of the time it is the chime that is not working.

[@jamescc2010]

Doorbell wires didn’t have any power. Transformer is bad probably. Will follow your instructions. Thank you

[@cvince3333]

Good video well done and thanks for the great content!

[@DeaninItYourself]

Much appreciated!

[@user-xj8oy1eu7o]

this helped alot thanks

[@DeaninItYourself]

Glad it helped

[@TheKevMaster]

I'd recommend turning off the breaker in your video. While you are cautious enough to know how dangerous it is, a noob won't realize that

[@virginiarappleyea8532]

Thank you!

[@DeaninItYourself]

You're welcome!

[@kendraconner1003]

Helpful

[@steelewheels1365]

Thanks for the video. No Bueno here. I have voltage at the transformer but none at the chime or button. I have no idea!

[@DeaninItYourself]

if you have power at the transformer touch the two wires together at the doorbell and see if it works. if it does just replace the button

[@beerhe]

We had a person install a storm door and our door bell started to hum. Could a wire have been spliced forcing the humming noise? Replace Door bell and Door chime and still does same thing. Driving me crazy what the issue is! House is 7 years old. Have not found the transformer. Any ideas? Probably going to a battery operated door bell next.

[@combinedeffects4799]

Can you shock yourself handling this repair - do I have to shut off power?

[@eternalklothgardengangsta685]

Great vid. Thanks

[@DeaninItYourself]

Glad you enjoyed it

[@angelshields2132]

Yes I got it going on now

[@jorgelagos5326]

Hey that is nice explanation. Good luck in you features videos

[@DeaninItYourself]

Thank you so much 🙂

[@getmymail2676]

Hey DIY. Great vid but what if your old transformer only had 2 wires (black/white)? It sits in a plastic instead of metal box behind the doorbell chime. I do not see and bare/ground wire. Any suggestions? Thanks

[@DougCeleste]

Isn't it safest to first turn off the power when doing a job like this?

[@Travelingman812]

My door bell is attached to the vinyl siding. To get to the wiring I have to remove a layer of vinyl. To do that I have to remove a shutter. Does the vinyl then just slide off?

[@raheemal-ugaily2529]

thank you, my door bell problem solved, I have to replace the transformer.

[@dhanaodari1395]

I like this 🎥videos

[@aalvarez554]

So turn the power off first? Will it stll give a reading with power on or off ?

[@elraycole3046]

How do you wire the chime if you have front and rear button

[@kenhdog]

You said set the VOM to AC to test for voltage at the button. Shouldnt it be DC at the button?

[@KungFuMojo]

In all this process, you don't have to shut down power at the breaker?

[@RuhulAmin-ll2yg]

Thanks

[@DeaninItYourself]

No problem

[@TzoeLife305]

Thanks gangster

[@benny9685]

i have door bell with video to see who is the guest from inside. when we slide move volume control low to high or high to low, we can hear the sound of the bell when we tested and pressed bell button from outside. but the next day, when you press the button again, no sound and no video or some times just the video. we repeated what we do with the volume control, tested and working..but not working on the next day.. any suggestion to fix..?

[@sadhanasurendranath5897]

All ok bro . It is safe by putting the CB's off before connecting the xforner...

[@jituxx7570]

Thanks for good information and good effort to show ! My question is , this transformer connected in circuit breaker? Right? Because, I have exactly same chime and doorbell! And I believe that behind my chime there is no transformer! Pl help ! Thanks

[@DeaninItYourself]

yes it should be connected to the breaker

[@moisessantacruz148]

Thank you for this video I have issue with my doorbell I already check power but I have no reading my problem is that I can’t locate the transformer in the house is not at the back of the chime any idea where it might be located?

[@neilleo9744]

May be in the garage

[@neilleo9744]

Garage

[@TheStig1961]

Always remove the main to the transformers primery 110 or 230 V side. If you not wear protective gloves, there is

[@josep2807]

Hello. I have a question - hope you can be of assistance. I’m in the process of doing some minor renovations to my home and I want to remove my rear doorbell. Obviously I’m going to remove the doorbell and patch it up with stucco. By disconnecting the rear wire from the chime box, will that be enough or are there other steps I need to take? Thank you in advance

[@EriBarr]

Rear doorbell? You have two doorbells? That’s interesting.. was the rear one used like a service type doorbell.. just curious lol

[@josep2807]

@@EriBarr yeah I have a front and a rear… old house lol. Weird.

[@josep2807]

@@EriBarr I’m not sure but the chime has the transformer and a front/rear terminal. I can simply disconnect the rear terminal but I want to make sure that would suffice

[@fstemarie]

If you got nothing when you checked with your multimeter, it's probably that you had cut the power before because you immediately proceeded to disconnect the transformer and, of course, you would'nt do that if you still had the power on.

[@xmuta]

Don’t you have to shut off the power first?

[@TheLukemcdaniel]

Even if you don't need to, it's never a bad idea.

[@phillipmercurio]

Which one is hot and ground? Because you had red on red black on black outside at button and black on red and red on black inside at transformer.

[@portobelloedinburgh8891]

@ 11:50 the previous trnsfrmr wasnt even grounded. Geezus....

[@punchbuggyteehee2054]

What if I can’t find the transformer? I checked everywhere. There is no chime box…?

[@MK-wi1bj]

I would like to remind you that we can not test the transformer from wires of the button switch as you know the wires in switch either both hot or 0 volt ,any way thanks for your video .

[@DeaninItYourself]

Thanks for the info

[@Gnarcap]

Ever run into a transformer that has its wires soldered? Facing that now while attempting to install a new transformer and trying to decide how to remove without damaging the existing wiring

[@DeaninItYourself]

I have seen this before. I just cut the soldered wires and use wire nuts

[@yolandamacias6158]

How much cost to replace transformer plus labour?

[@gregorytataw6024]

You did good but did not apply safety with connecting the transformer to AC

[@winonfire5671]

Is it every door bell they do have transformer at back side of chim in UK? Pls advice. Thanks very much.

[@DeaninItYourself]

they should

[@donaldolson8985]

What if when I take the chime down, I don't see the transformer box? Where can it be?

[@mabon4525]

Ours is on the side of the breaker box, which is pretty common.

[@davidmelton7515]

Ours is mounted to the side of the ac/heater unit. The inside unit, not outside.

[@shadow.banned]

You're touching live wire without turning the power off?

[@LazyScoutJace]

Working with that live 120v was very dangerous

[@laorhino9702]

Where’s the transformer generally located?

[@RichardTurner-ss8zo]

Can You Show The Front And Back Door One