Debug LED always on FIX

[@MacCoyzkie]

Check more pc fix tutorials kzbin.info/aero/PLqHl1qasBnOHXQahxqQMkuUkoRg3dbSwQ

[@visage7795]

my motherboard only beep light once on cpu indicator, but it won't turn on along with the cpu cooler and power supply.

[@MacCoyzkie]

@@visage7795 is this a new pc build or was a working one?

[@visage7795]

@@MacCoyzkiethe PC is not new but the few parts like the CPU CPUcooler, anyway i watch more of your videos, and found out that it may be a foulty Power supply, i search a bit in the light indicators and found out the mother is still working because of the light indicator still kicking and the problem was not the cpu, since i try to switch back the old CPU and CPU cooler, but still not working, i borrow my friends old power supply and it started booting up again, anyway your videos are helpful and thanks for responding.

[@MacCoyzkie]

@@visage7795 no problem bro, glad you got it all figured out with the videos

[@knightnight2777]

Bro please help me.....vga led is always on i reseat my gpu re seat all the wires remove the cmos re seat the ram sometimes it work and my pc boots then i run cpu and gpu stress test for 20 mins and it also works ...as soon as i open any game it crashes black screen...and keyboard or anything doesnt work...only option lept turn it from the shut down button then i turn on the pc again same issue again vga ez debug led on

[@kindathoomin7039]

Dude, this information was a lifesaver! I ran into the “Boot” Debug. The Sata port ended up being my issue. Thanks for the video.

[@MacCoyzkie]

you're welcome bro! glad it was helpful

[@Gabemyster]

My pc just randomly decided to work while I was watching this tutorial lol 😂

[@MacCoyzkie]

magic 🪄

[@MonkeyDGalen]

WAIT WHATT RIGHT AS I WAS READING THIS COMMENT IS STARTED TO WORK

[@MacCoyzkie]

@@MonkeyDGalen you too 😆, glad its all good now

[@pileofwood1758]

@@MonkeyDGalen my luck isn’t so good nothing happened

[@HSNetwork948]

Alright boys let’s see how I do. I’m about to put the CMOS battery after a 5min wait😂

[@lani26lani]

Thank you for the rarest tip that fixed it for me, the eraser

[@MacCoyzkie]

no problem bro

[@TheRedeemed19]

Yo this video is literally a God send, I had the DRAM issue and it worked as soon as I removed the ram stick and put it back

[@MacCoyzkie]

glad it worked!

[@Sean-sn6gn]

Thank you!! The information on the boot light was extremely useful. Saved me so much pain.

[@MacCoyzkie]

no problem

[@stephenspeliades2941]

Hey Mac!! Thank you very much for sharing your knowledge here. I myself appreciate how you detailed and broke things down step by step to help us understand. I just got my first asus motherboard and have been getting a red light and I didn't even notice there was four indicator lights there!! This whole time I thought the CPU socket was busted, turns out I needed to swap the ram sticks out!!

[@MacCoyzkie]

No problem, bro! I'm glad it was helpful. Comments like this mean a lot to me, and it’s great to know if I’m on the right track."

[@dr.z6601]

No more vga light for this guy woop woop! Thank you friend!

[@MacCoyzkie]

awesome! no problem bro

[@noslker6717]

Thanks! Helped me understand more of how to diagnose and fix, in my case, thankfully my dram light was on and by taking both out then cleaning before reinstalling turned my back on

[@MacCoyzkie]

no problem bro 👍

[@hooduvoodu4186]

What if it blinks between dram and CPU??

[@Harpocrator]

@@hooduvoodu4186 CPU is not working

[@adarshchandanshiv1723]

You saved my life brother this means alot to me my pc owns a very soft and important part in my life and heart Thank you so much for this ❤️❤️❤️

[@MacCoyzkie]

glad i can help bro

[@NevItAgain]

Thank you!!! All night looking for the solution, and your video saved me

[@MacCoyzkie]

Glad it worked! you're welcome 😊

[@Ahhh11]

cheers. ibstead of 2 rams i connext 1 on the 4th slot and it worked. i was stressed thinking i needed a new cpu

[@darkbulb3794]

i was ready to take it to the shop good thing i notice the debug lights.... thanks

[@Taurezas]

I had both CPU and DRAM lights on. Switching the rams worked for me.

[@MacCoyzkie]

[@YooRyZe]

@@Taurezas I currently have that problem but I don't have no other ram sticks

[@Taurezas]

@@YooRyZe i just swiched my ram sticks that i already had in my PC. I didnt use new ones ;)

[@FUNDAILYMEMES]

Hey Mac, great video, but I can’t seem to fix my PC problem. This is my first time building a PC, and I’m using a B450 Tomahawk Max motherboard (used), NVIDIA GeForce RTX 3070 (used), AMD Ryzen 5 CPU (new), 1TB SSD (new), and a Thermaltake 650W power supply (new). When I turned my PC on for the first time, there was no display, but the fans and RGB lights worked fine. Also, the red CPU light on the motherboard is on. What can I do to fix the issue?

[@MacCoyzkie]

you need to update bios, perhaps the motherboard doesn't have the bios for ryzen 5 (new). visit msi's website look for your motherboard and check the bios download for the ryzen 5. Installing the bios have different ways depending on the brand and model name so you need to check the motherboard manual for that. A bit of a warning though, do not interrupt the bios update process, more info here kzbin.infonfH5Do3Dq3o

[@FUNDAILYMEMES]

@@MacCoyzkieThanks for the help, i will go update the bios.

[@qraee]

what’s weird for me is that it displays and recognizes all my parts in the bios but I can’t get rid of the red boot light ??? is it because I need a bios update??

[@MacCoyzkie]

i bet you got the latest motherboard, b650, x790 or b660. I got several viewers who are experiencing the same and it seems most of them just updated bios and fix the problem. but before you update yours check this out first kzbin.infonfH5Do3Dq3o

[@qraee]

@@MacCoyzkiei have a b550, it’s the msi mag tomahawk max wifi. It does the thing where as soon as i turn on the pc it will go red on on cpu, then vga, then stays red on boot.

[@MacCoyzkie]

@@qraee usually if the cpu already works with the mobo you shouldn't update the bios anymore. this is more like a motherboard issue but if it bothers you so much i think updating the bios is the only choice

[@qraee]

@@MacCoyzkie I ended up updating the bios and the light went away, thanks for the help tho

[@MacCoyzkie]

@@qraee no problem bro

[@eXCee]

You are a legend, my friend. I've been having issues with my ram, and the eraser trick worked wonders.

[@MacCoyzkie]

awesome! glad that method worked for you too

[@arminhg2978]

can i please ask, what will happen if i continue working with my ram while i have this problem ? i figured out i have this problem because there is a orange(yellow) lights turnes on everytime i turn my pc on!

[@SupraBagels]

I Lowkey prayed to god and it worked

[@hekasoram]

What if the GPU works fine but this LED keeps coming up? 4090 with a 1000w PSU (Corsair) First time it went blank and I had to remove it. Second time LED light up and stayed light but the VGA works, while the LED is still ON

[@MacCoyzkie]

just update the bios, i'm not sure why this is happening to most motherboards nowadays whether be intel or amd build. anyway before you do that you need to know this first kzbin.infonfH5Do3Dq3o

[@dapperdon96]

My pc boots up fine plays fine displays screen but all of a sudden i notice the dram light on red solid light but i have no problems running my pc or playing then today the dram light went away and now shows the vga solid red light its my first gaming pc had it since march 2023 dont know much of it but basically brand new i need to try this see if that fixes the problem

[@MacCoyzkie]

i notice most build from last year's motherboad stocks have this kind of problem. As i always tell my clients to just use it normally but if it bothers you so much you can fix that by updating the bios. Since your pc was working since march 2023 i don't think its a problem but you need to update bios at some point. just be careful if you're updating it yourself for the first time, check this for more info kzbin.infonfH5Do3Dq3o

[@LiquidJim]

I got the same issue, but the problem is only after I power cycle the pc, it can boot again.. and it happen every time I cold boot the pc... and I can proceed to play cod... not really sure what happen... Its a new rig running on tuf x670e with 7600x and 3070 card on c750 psu.. i reflash the bios to latest hope it will work but still the problem keep coming back...

[@MacCoyzkie]

recently i've been receiving comments from viewers with these new generation mobos and yes most of them got it fix by bios update btw just a little advice here kzbin.infonfH5Do3Dq3o

[@LiquidJim]

@@MacCoyzkie reflash it to latest bios doesn't make the problem go away... can I reinstall the same version of bios? I think I didn't do a clean install.

[@MacCoyzkie]

@@LiquidJim you can actually

[@qus.9617]

Have any of you guys ever managed to get your PC to post but the DRAM light remains on???? what the hell is going on? BIOS is fine for latest or oldest version, ram is detected, base ram speed and oc ram speed is fine according to the menu. All the components are listed. No CPU warning light. What am I meant to do? I was advised to just ignore the light and continue with OS installation and drivers. I've done the CMOS clear, reseating the RAMs, doing one stick of RAM. All that got me was getting the PC to post. I even unlatched the CPU which I absolutely hated I feel like I am damaging the pins everytime I do this. And I untightened the CPU air cooler which runs the risk of it falling off the board given how heavy it is. I am so goddamn frustrated. I know for a first pc build it should be but this is a whole other level man.

[@MacCoyzkie]

about the bios update, firmware must be specifically compatible with your cpu. if you already done that and the debug led is still bothering you i suggest return the mobo to the store where you got it from and ask for replacement. this is actually considered as faulty mobo since it's not reporting the correct debug led.

[@qus.9617]

@MacCoyzkie I managed a few restarts with windows doing updates. It did briefly have blue screen of death sad face for half a second and crashed. But now all the updates for drivers are done. I am now running a memtest86 test to check for faulty ram or motherboard. The motherboard now briefly lights up the CPU led, then DRAM and then both are turned off when I restart the pc. Thankyou for personally responding with a very helpful reply. Have a merry Christmas.

[@MacCoyzkie]

@@qus.9617 glad it all went well bro! Merry Christmas to you too

[@megustaq8]

Have the VGA on sometimes and off sometimes but the system is working fine playing games and everything dont understand why is it sometimes on and sometimes off though :/

[@MacCoyzkie]

you can just leave it and still use the pc but if its bothering you so much then a bios update will fix that, if you going to do it yourself just be careful, more info here kzbin.infonfH5Do3Dq3o

[@megustaq8]

@@MacCoyzkie if its not broken dont fix it I guess Im scared to update the BIOS I think I'll leave it like that, thanks for replying thou ..

[@soulstudiosmusic]

Extremely informative and useful video. Thank you! You saved my bacon.

[@MacCoyzkie]

no problem! glad it helps

[@oskarjacobsen2209]

when i turn my pc on, it first light on cpu, then vga and then BOOt, but the red light only stays at boot. i have tried taking out m2 ssd but it doesnt work, what do i do?

[@MacCoyzkie]

replace the sata cables both power & data. if still does not work this is either a faulty drive or messed up windows os. To check try using a different drive, remove that ssd for a while and boot the system. if you see "reboot and select..." this means there is something wrong with your ssd

[@oskarjacobsen2209]

@@MacCoyzkie i Got it to work!, Thanks :)

[@MacCoyzkie]

@@oskarjacobsen2209 no problem

[@qraee]

I have the same issue

[@MacCoyzkie]

@@qraee i answered your first comment bro, check it out

[@fizzmac966]

Hey Mac Coyzkie! Quick question! Still having trouble with my PC and I started to look around for information and stuff. I read that the Debug lights colors don’t matter when you boot up your pc. Supposedly it only matter when the Debug lights turn back on and stay on. Is that true? When my pc boots up the CPU led light is Red Then my Dram led light goes on Yellow Follow with GPU/vga led light White The boot led light sometimes doesn’t go off. My PC turns on btw The issue am having is that my PC starts running slow and then it turns off. I used to work around it by removing my ram stick and putting them back on and I would be able to game for hours. Then couple days ago my little trick stop working. Swapping the ram stick won’t work anymore. My Pc runs good for a solid 30 minutes and then it just lags and turns off. Also for the first time my pc got a warning screen that my CPU temperature was high So point of all this was if the debug light that turn on with a different color at the start are actually warning or that’s just how my Motherboard turns on because none of the light stay on afterwards. I thought those light indicated what issue my pc has but if that’s it natural start up then idk what my issues is. Anyways thanks in advance

[@MacCoyzkie]

in some cases the led colors matters depending on the motherboard manufacturer but mostly it doesn't matter. if you did received a warning about cpu temp then that might be a cpu cooler not working properly, this always happens to aio cooler pump not working, if you are using air cooler then it might not be touching the cpu so i suggest replace the thermal paste and use a better one. more info here kzbin.infoyWJehPzuVdw for now, if you are using windows 10 i suggest clear cmos, here's how to kzbin.info/www/bejne/iWrLqniGiauFZ5I so we could test things out in default settings

[@fizzmac966]

@@MacCoyzkie Oka thanks a bunch for the info! Am thinking of upgrading to a full tower and buying bigger fans to give it more air flow and cooling. Thanks again! 🤘🏻

[@fizzmac966]

@@MacCoyzkie also!! Funny story! I went to my electronics store to buy thermal paste and when I got home to put on my Pc, the box was empty! I bought the Corsair Xtrem temp and all it came with was some wipes and a place holder for the tube of thermal paste but no thermal tube. Probably a manufacture error . Going tomorrow for a return and hopefully getting a new one.

[@MacCoyzkie]

@@fizzmac966 yea it is probably, i hope it all goes well

[@jaliseosoto6064]

My Tomahawk B450 is just now doing this ive reset the battery 4 times (haven't replaced it yet) ive jumped the terminal, havent reset the BIOs yet might do that soon. But ive completely removed my MoBo and will put it back in with only 2 of 4 hard drives installed and see if that works... Any other suggestions would be very much appreciated.

[@MacCoyzkie]

what are you trying to accomplish? what's the debug led you are experiencing?

[@badgerpatcher]

Solid red & yellow light on my new msi b650m gaming wifi. I have 2 G.Skill Trident Neo Rgb 16gb ram sticks. I haev tried reseating the ram, checking the cpu(ryzen 5 7600x) for bent pins, reinstalling the cooler (arctic freezer 34 esports duo), reconnecting the cpu power & the 24-pin power connector, I also updated the bios, tried shorting the cmos jbat1. But no solution. I don't know what to do. All the components are brand new out of the box. Please help.

[@MacCoyzkie]

how about using 1 ram stick at a time, place it in the 1st ram slot then boot the system, btw are those ram sticks ddr5?

[@badgerpatcher]

@@MacCoyzkie yes tried with 1 ram stick too. Yes the ram is ddr5 cl30 6000mhz. I'm thinking of taking the setup to a computer shop.

[@MacCoyzkie]

@@badgerpatcher i see, this might already be hardware problem but we can't figure out unless each parts are tested in a different pc. you'll be needing the help of a local shop to this so yeah you need to take the pc in the shop

[@badgerpatcher]

@@MacCoyzkie guess what, expo on the ram was causing problems now the ram's running @4800mhz and the expo profile is disabled & the system booted fine. I am really happy.

[@xTempestx002]

Hey plz help my pc is experiencing the same issue it’s a whit cpu light I’ve tried everything but no change my mobo is B550m pro vhd and Ryzen 5 5600x

[@MacCoyzkie]

you might need bios update for your b550 mobo so that 5600x could work.

[@ayushsingh692]

bruh i am having the same issue with my b550m pro vhd and ryzen 5 5600x from two days .were u able to slove it ? if yes plz let me know 😢😢😢

[@ayushsingh692]

it has been two years since i build my pc and was working fine and yesterday when i turned it on no signal started to show up and cpu white light turned on on the mobo

[@watermelonlimet.craziness2130]

My cpu debug light is on but when i went to a repair shop and tested it they said the gpu was the problem and when they place a new one the pc booted up... and although they cleaned the gpu and it worked again im now experiencing the same problem with the pc not displaying anything. Should i try cleaning the gpu again or make them test other parts

[@MacCoyzkie]

you can clean it the same way i did in this video, if it still does not work have it tested in your relative or friend's compatible pc to double check

[@asura5959]

i have a weird issue that has been happening to me sometimes my pc works fine and some other times it won't turn on and i get the red led for the cpu and if i just turn it off for a few hours and come back it'll work perfectly fine and idk what i can do to fix it

[@MacCoyzkie]

when it does work can you monitor the cpu temperature? i worked on pcs that sometimes when it overheats cpu becomes undetected

[@asura5959]

@@MacCoyzkie it's usually sitting around 68-70 degrees celsius which should be fine idk what's the cause of the issue or what to do

[@MacCoyzkie]

@@asura5959 i think you need to reseat the cpu the same way i did in the video

[@kaelhex7359]

Did you find any solution? I've the same issue

[@twessels]

Can a custom CPU cooler lead to a lighting CPU EZ Debug LED? Or is this always the CPU itself?

[@MacCoyzkie]

the cooler itself can't but more like the way the cpu was seated could. usually i will test the cpu with a different mobo to double check it but obviously that is possible for everyone. if you have a friend with compatible pc and is willing to test it with their rig, get it tested

[@lydiahomeprojects9544]

My CPU LED light is white and stays on. I did everything you showed and nothing has changed. I am confused at this point

[@MacCoyzkie]

new pc build or was previously working?

[@lydiahomeprojects9544]

@@MacCoyzkie This is a relatively new PC. Same issue even with the second motherboard. I called MSI days. Sent me a new one after I returned it. Same issue

[@lydiahomeprojects9544]

I even went to head head check the pins. Everything is fine. Nothing is bent. I took it out so many times. Clean it off the paste with alcohol. Now I'm running out of paste because I did it so many times and the light is still there. I don't know what more to do

[@lydiahomeprojects9544]

@@MacCoyzkie Yes, it was previously working

[@MacCoyzkie]

@@lydiahomeprojects9544 wait so you got a new motherboard right now right? if so i think that needs bios update. what's the cpu and the motherboard model name?

[@oxalic8003]

My dram debug started lightening after i tried to change my cpu and than changed back to download the needed bios update for the new one... before it worked and after that nothing works any more... i already did everything you said...

[@MacCoyzkie]

i hope you did not interrupt the bios update in any way because that will destroy the motherboard. Since you updated the motherboard bios for the new cpu then the old one will no longer work. the one you installed might not be compatible with the new one so you have to double check the bios update version specifically for your new cpu. most motherboards nowadays doesn't need monitor to update bios, usually there is a flash bios button on the motherboard's io. just place the usb with the bios update file in it and nothing else, place it at the specific motherboard's usb bios input then press the flash bios button. each motherboard has its lighting indicator to see if update is done or still in progress so check your motherboard manual for that

[@nostaldex]

Vga works on a other pc, but on z790 i got vga lighting 😥. It starts at cpu yellow then it goes off fast and move to dram, then gors off fast too and stay on vga… assembled pc first boot does that

[@MacCoyzkie]

before anything else can you tell me the pc specs first, also are you switching gpu to the other pc you are talking about?

[@nostaldex]

@@MacCoyzkiehello thabks for replying. Got it to work, update 1070 firmware in another pc and did bios update on z790 mobo. Reasembled all cables and worked. Thanks

[@LostSoul-TeemoMain]

So, Odd question. I Recently did a custom build, When i finished the Red (CPU) and Yellow (DRAM) are constantly on, I've tried reseating all the ram, doing ram 1 at a time (Different sticks) Don't see any damage. Lights are not blinking, Just solid RED & Yellow. Looked at CPU itself don't see anything wrong, Tried briefly without CPU Fan to see if maybe it was pressure? Didn't change it. Far as i know it should be compatible with eachother? MSI PRO B650M-A WiFi ProSeries Motherboard, Thermalright Assassin X 90 SE V2 CPU Cooler, AMD Ryzen™ 5 7600X 6-Core, 12-Thread Unlocked Desktop Processor, Sapphire Pulse AMD Radeon RX 7800 XT Gaming Graphics Card with 16GB AMD RDNA 3, Corsair Icue 465X RGB Mid-Tower ATX Smart Case, CORSAIR RM Series (2021), RM750, 750 Watt, 80 Plus Gold Certified, Fully Modular Power Supply. Only thing i haven't tried is CMOS spent a good 9 hours trying to fix. Anyone else have any other suggestions? I'm thinking it is CMOS or Motherboard itself, I've decided to stop touching it and bring it in to a local expert before i make the issue worse. Just trying to collect as much data and suggestions as i can. And yes, I Tried leaving it running for an hour to see if maybe it was doing memory training? Lights never went away.

[@MacCoyzkie]

I checked your pc specs in pcpartpicker.com and it seems like the specs are compatible, i didn't get your ram model name though so you can check it again just in case, usually the website will tell you if ever there are incompatibilities. If there is anything i can think of, perhaps the motherboard needed bios update. since the pc are all brand new i suggest bring it to the local shop where you got it from and have them do the bios update for you

[@LostSoul-TeemoMain]

@@MacCoyzkie My bad, Forgot to paste RAM XPG Lancer Blade DDR5 6000MHz CL30 32GB (2x16GB). I'm getting a Diagnostic done locally all the parts are brand new off amazon got them premium shipped to avoid damage, I think it might of gotten damaged (Motherboard) when i took my antistatic gloves off to put wires in, Couldn't see what i was doing have big hands the gloves made it too difficult. I'm praying it's just the Motherboard have removed the GPU to make sure no damage comes to it and have placed it in the anti static bag. I Did all the work on it, Not a prebuilt. Was my first PC Assembly think i really goofed hard on it. Think i was being too careful and didn't seat things properly or it got static shocked when i did the wiring. Gunna get it assembled locally aswell if it's not a huge costly repair job. I let my friend convince me to do a custom "It's adult legos" Very stressful lol. Probably going to stick with Prebuilts till GPU and CPU prices start being reasonable. Thanks for the quick response btw, Just trying to gather as much information as i can so the Technician has an easier time. Sorry for ranting too.

[@MacCoyzkie]

@@LostSoul-TeemoMain it's fine bro, i hope it will all go well with your pc build

[@jacksoncabrera7236]

The vga fix, helped me a lot thank you! I unhooked my gpu and tried not to force it back it, but now my pc boots again. Thank you so much! Your a life safe r🙏

[@MacCoyzkie]

glad it worked! no problem

[@a1gabebb]

@@MacCoyzkie Igh hold up cuz I did the same thing you did for the vga fix and my pc still won’t boot

[@MacCoyzkie]

@@a1gabebb you need to do more testings then, can you ask a friend to test your gpu in their pc to check?

[@Hector-rg1bs]

I have the debug code E2 (initializes VGA for s3) in my Gigabyte GA-Z170X-UD5. What i can do to fix it.

[@MacCoyzkie]

if its stuck there it might not be detecting the gpu, can you try clearing cmos for now, here's how to kzbin.info/www/bejne/iWrLqniGiauFZ5I

[@Hector-rg1bs]

@@MacCoyzkie I did it Mac but I still have the same code.

[@MacCoyzkie]

@@Hector-rg1bs may i know your entire pc specs and how the pc problem started?

[@TheDiagoz1]

Can it also be that the MOBO itself is faulty? I randomly get CPU and sometimes boot light but there are also times when my PC boots normally without applying any changs. What can it be?

[@MacCoyzkie]

yes but try to reseat the cpu first

[@TheDiagoz1]

@@MacCoyzkie I tried everything ang now I randomly get CPU light or VGA light and sometimes Boot light. But when the PC manages to boot it is very slow and even desktop feels laggy. I'll try replacing mobo and see if it helps.

[@MacCoyzkie]

@@TheDiagoz1 you going to buy a new one? hope it goes well

[@Uzumaki08N]

Yes this process actually working please try any buddy's ❤❤

[@MacCoyzkie]

👍

[@musiclyf.1.5mviews.5hoursa8]

Thanks bro you helped me alot in my case the 3th light was on so i did was removed my hdd and checked the ssd sata and sata connected to the motherboard and it sloved the problem the ssd was causing the problem. Very helpful video thanks alot.

[@MacCoyzkie]

happy to help bro, glad it worked

[@likesolrng]

hello! i have a problem i am a beginner at pc building and i ran into the problem of the “boot” light and i tried the same method that you did and still didn’t work and i reseated the cpu ,gpu and the ram. so may you help me?

[@likesolrng]

and the motherboard is the msi b550 gaming gen 3

[@MacCoyzkie]

if your boot drive is ssd/hdd, try replacing the data sata cable and plug it into a different sata slot on your motherboard. if nvme, just reseat it

[@likesolrng]

@@MacCoyzkie thanks man it worked!!

[@likesolrng]

@@MacCoyzkie i love how you still reply to those even tho you made this video 1 year ago. it really shows that you like to help people, and like i said thank you so much!!!!

[@MacCoyzkie]

no problem bro

[@eren979T]

Thank you , the problem has been solved. But the CPU light and VGA light are on when the computer starts up and then disappear. Is there a solution ?.

[@MacCoyzkie]

that's normal, the motherboard actually checks the parts if its working. if your pc starts fine you shouldn't worry about it

[@eren979T]

Okay thanks 👍.

[@macahappy0609]

Hey how about the cpu turn on but no led light up even the red one. Please help

[@MacCoyzkie]

two things, psu is faulty or the motherboard is faulty. if you got a spare psu try it out to check

[@macahappy0609]

@MacCoyzkie thanks I did try it on different PSU. Same result. I have no spare board. But the board led lights up. When I turn it on

[@MacCoyzkie]

@@macahappy0609 sorry to hear that bro but the mobo might be dead. is this a new build?

[@onphs]

So... what about when the build is brand new and both the cpu and dram are on?

[@MacCoyzkie]

parts incompatible, not detected or faulty. what are your pc specs?

[@onphs]

@MacCoyzkie i did multiple tests and turns out is a faulty ram slot. If I have only one ram plugged in slot A it goes to Post but if I switch it to slot B the cpu and ram led stay on. Tried with another ram and same results. Processor is Ryzen 5 7600x Motherboard MSI A620m-e Ram Kingston Beast ddr5 32gb(2×16) Psu Cooler Master 750w 80plus Bronze

[@MacCoyzkie]

@@onphs since its new use Rma, i hope they replace it with a working one

[@Crystal19961]

So I have this similar mobo except b660 with these debug issues. The dram, VGA, and boot light up for a few seconds when I boot it up with the GPU plugged in. The GPU is the RTX 3060 ti. However, if I unplug the GPU and run the computer off the motherboard it boots up just fine. I did notice that it is not detecting wifi or my HDD (but it sees my SSD so windows downloaded on that anyway). I already did the steps except cleaning it (it is brand new out of the box and not being able to test it on another computer). Do you think this sounds like a faulty GPU if the computer can run off the motherboard still? Should I exchange it?

[@MacCoyzkie]

if its new no need to clean it, you can try this first kzbin.info/www/bejne/pqjKmGuMpZeBhM0 let me know how it goes

[@Crystal19961]

@@MacCoyzkie so I’m having minor issues. If I plug the graphics card in I can’t reach the battery because it covers it. But if I move the gpu lower I have to unplug some cables that hit into the gpu fan (the board is a smaller version). Would I be able to remove the battery then place the gpu in or would it be okay if I remove the cables? (Audio, a fan, and sata for HDD that actually isn’t registering on the computer either)

[@Crystal19961]

@@MacCoyzkie I tried both steps of the video, but neither seemed to work. Under my display adapter I only see “Microsoft Basic Display Adapter” and it only lets me uninstall it and not delete it

[@MacCoyzkie]

@@Crystal19961 did you plug the hdmi in the gpu port? sounds basics but i need to check. if you already have try going to bios and load optimized defaults, its actually the same as clearing cmos

[@paulbryanapolinar1935]

I have the cpu debug light on when I shut my PC down and it doesn’t really turn off. Fans are on but the monitor display and keyboard are off already. I’m so confused and lost.

[@MacCoyzkie]

may i know the pc specs so i can have an idea?

[@paulbryanapolinar1935]

@@MacCoyzkie cpu is amd ryzen 5 3600 , psu is 650W, gpu is amd rx 6750 xt, 16gb of ram. And as of now, it doesn’t boot anymore With the cpu debug light on. 🥲

[@paulbryanapolinar1935]

@@MacCoyzkie ok i tried reseating the ram sticks and it works again for now, does this mean that my RAM sticks have the problem? HyperX Fury DDR4 3200 8gb x2

[@MacCoyzkie]

@@paulbryanapolinar1935 it might be or it just needed cleaning

[@paulbryanapolinar1935]

@@MacCoyzkie thank you for the reply! :)

[@Lostt443]

What if all my q leds on mb are flashing one by one and i get no display as soon as I power on my pc

[@MacCoyzkie]

flashing one by one even without you powering the pc on? you need to reattach every pc part and make sure they are properly connected

[@kenozieobina5234]

I just cleaned up my pc today. I put a new thermal paste. Now, I tried several stpes to fix it. What if there are no lights that pops out when I opened my PC, but the motherboard works. The GPU is On with lights, the CPU fan is working, but no lights on RAM. However I believe there’s no issue with the DRAM because I don’t say any lights from those 4. Any solution to this? Please help. Thanks!

[@MacCoyzkie]

if you tear the pc down including the cables then its most likely you misplaced the front panel connectors. double check it kzbin.info/www/bejne/gqm1q39rjKt1b8U try to jumpstart it through the motherboard using a screw driver also make sure the everything hardware and cables are seated correctly, especially the ram sticks kzbin.info/www/bejne/i3y1ZquIqLSbhMk

[@kenozieobina5234]

@ the F Panel was all good to be honest. I really don’t know what could be the exact problem into this.

[@MacCoyzkie]

@@kenozieobina5234 can you ask a relative or friend with compatible pc to try out your ram sticks? it's really difficult to figure out what's wrong so we need to test the individual parts of your pc into another working pc

[@kenozieobina5234]

@@MacCoyzkie ended up buying a new mobo, it was the problem. Very sad though it only took 2yrs, as there was moist inside.

[@MacCoyzkie]

@@kenozieobina5234 sorry to hear that bro, 2 years is short indeed. try placing silica gel inside the pc if you are not going to use it for a several days kzbin.infoNcLkeTdquXw

[@3200ricardo]

Hi there. On my Rog Strix B760 F gaming Wi-fi board the VGA LED is always on but the PC enters on Windows. The graphic card is a GTX 1070 (8Gb). The only thing I can't do is entering on BIOS neither by F2/Delete button nor by the Windows restart to UEFI definitions. I don't know more what to do with it...

[@MacCoyzkie]

i'm not really sure what's up with these new motherboards either from amd or intel, you're not the only one suffering from this issue. Anyway just update the bios accordingly but before you do watch this first kzbin.infonfH5Do3Dq3o if you can't do it yourself just bring it to the local shop

[@Chameleos9]

It’s my first time ever building a pc everything turns on and lights up but my vga stays red and I get no display I have a rtx 4090 gaming trio do you know how to fix this? :(

[@MacCoyzkie]

some build needs bios update, if the bios is already updated check the cpu/motherboard pins because one bent pin can cause this

[@Kt-xk1nv]

My pc has the light blinking between cpu and dram and idea on what the problem is. It happened after I knocked my desk and my pc froze and after force shutting it down it just blinks between the two

[@MacCoyzkie]

that's difficult to figure out, is there any written indication what is that light for?

[@omvishwakarma7064]

my motherboard shows vga led everytime i boot up in its stuck on a black screen. it occasionally turns on just fine but most of the time it doesn't. im using a 4650g without a separate gpu on msi a550m pro. please help

[@MacCoyzkie]

can you try clearing cmos for now, this is to run things in default settings, also for the mobo to redetect your hardware connected to it kzbin.info/www/bejne/iWrLqniGiauFZ5I

[@Buenaflor-S.C.]

I have the DRam light error... but it's not always tho. Sometimes my system boots Sometimes not. My RAM is in the QVL of my MB so i don't know why I'm getting issues. Xmp also doesn't work. System is a R7 7700x, Gigabyte x670 elite ax, Gskill Trident Z5 6000MHz CL36 32gb.

[@MacCoyzkie]

that build is perfectly compatible and xmp should work just fine, if there is anything i can think of that is causing the problem, it might be the mobo needed latest bios update. If im not mistaken this has been a problem with some people with the same motherboard as yours

[@Buenaflor-S.C.]

@@MacCoyzkie yeah but I've already tried updating, but still can't get XMP to work. I've tried BIOS F4 (the original BIOS on my MB), F5, F6, and now 7b which is slightly stable.... but still can't get XMP to work. Tried doing test to see if there are errors but nope.

[@MacCoyzkie]

@@Buenaflor-S.C. this has to be a motherboard problem since there are plenty of people having the same problem. well i hope it all goes well with your tests

[@fizzmac966]

Dude! This is why I sub to your channel! Always have helpful videos! I have this problem on my computer! My pc had the black screen three times already and I got scare because I wasn’t sure what to do. Am still new to PC and so wasn’t sure exactly what to look up for an answer. Everything I looked up lead to my graphic card dying. My pc still kinda new and I couldn’t believe it was dying already. I eventually ran into another of your videos that mentioned about cleaning the Ram and yea, it worked. For the past 3 times that I gotten the black screen or my pc shutting off after a second, messing with ran worked. Now I know what those light means. Since it keeps happening my guess is one of the rams doesn’t work but I’ll keep an eye out on the led lights now! Helpful videos man!

[@MacCoyzkie]

glad the video was helpful bro! It's really difficult to find basic video topic as such that is why I created these tutorials. Hearing your feedback makes me feel this video serves its purpose 😀

[@smoove8107]

Hello. I’ve finished building my pc. And got through bios and now have windows. But whenever I go to boot my pc back up again, the red cpu led and yellow ram led comes up on motherboard. I then wait 2-3 mins and my gpu fans stops spinning and the lights go away and I then get display and get into windows like normal. It’s really weird and dunno what the issue is pls help

[@MacCoyzkie]

if those lights stays steady then that's a big problem, can you check the cpu if there are any bent pins on it or on the motherboard cpu slot

[@smoove8107]

@@MacCoyzkie Imma check. But if there is any bend pins then how Can i play on it and do stuff. Shouldnt it give blue screen or sum?

[@MacCoyzkie]

@@smoove8107 the weird thing is that the pc loads after some time, i was thinking you got an old hdd plugged in the pc or at least a thumb drive that is almost full. you can shut down the pc and remove the old hdd and just boot with your ssd boot drive and let's see how it goes

[@smoove8107]

@@MacCoyzkie i have No hard drive. Brand new pc. And only 1 SSD in my motherboard. Ive tried removing CMOS bug it still does it. Also got new rams and it still does it. After the new rams and removing the cmos battery, it loads maybe 1 mins faster. Still shows the debug lights and takes time to boot. Also when I restart the pc, the screen then turns black and only the ram light is up on motherboard. That also goes after 1 min and then it goes away and I get display again. So dunno what to do or what it is. It’s really weird looked every where and asked but no one knows

[@MacCoyzkie]

@@smoove8107 can you try to reseat the ssd and also remove the new ram sticks and clear cmos after

[@1torch]

What if all the debug lights turned on? I have a pc here that doesnt boot because of this.

[@MacCoyzkie]

if you watched the video these may be all the parts then, what's your pc specs?

[@1torch]

@@MacCoyzkie 5600x and 4060 ti. Its now fixed by resetting the CMOS for an hour. We suspect it was a motherboard error as we just installed a new cpu cooler.

[@MacCoyzkie]

@@1torch i see, glad its all good now

[@shreyasdharashivkar8027]

I have Z690 motherboard i5-12600K and whenever I wake up my pc from sleep mode the red light is always on.

[@MacCoyzkie]

So which debug led is it? Check the video for more info

[@KR0LI0SIS]

What about a solid Dram and CPU light on the motherboard

[@MacCoyzkie]

you have both ram and cpu problem, ram might not be compatible or not detected because it is not seated properly. Cpu might be incompatible or your motherboard needed bios update

[@KR0LI0SIS]

@@MacCoyzkie update: the fans/lights rapidly flash on startup with no monitor signal. The rapid clicking noise is also heard. The post status lights are flashing as well. Thank your for your time.

[@MacCoyzkie]

@@KR0LI0SIS can you tell me what are your pc specs first and how the pc problem started?

[@niklasradke]

Did you fix your problem?

[@niklasradke]

Did you fix your problem?

[@Motornationz]

Here’s my issue…. I had to always make my bootable option to boot in UEFI/LEGACY. I think most are defaulted to boot in UEFI. My boot led is on, and I am not getting any display output to even get to the BIOS, nor are my keyboard and mouse lighting up. Any ideas? I think I may have to get a different m.2 and use a USB and reinstall windows. The only 2 drives that are hooked up to SATA are for games and other software.

[@MacCoyzkie]

remove the other drives first and just leave the drive that has windows in it, clear cmos kzbin.info/www/bejne/iWrLqniGiauFZ5I and see how it goes. if still does not work try the new nvme you mentioned, im a bit concern over the keyboard not lighting up, because usually that is a psu or motherboard issue

[@Motornationz]

@@MacCoyzkie So I have tried it all. Even did a minimal post with no ram, no drives and the CPU debug light is on. So I think it’s fried. This is the second motherboard I have tried. PSU works as it should. So, have a new CPU coming and hoping that fixes it. 😖

[@MacCoyzkie]

@@Motornationz i hope it does work then

[@ykrez09]

I need some help everything turns on on my pc but there’s no debug led lights showing up nothing lights up I’m confused?

[@MacCoyzkie]

is this a working pc or a new build? if its a new build perhaps compatibility issue or motherboard need bios update

[@Kelaguirrec]

Hello, I have the VGA and BOOT led on at the same time, what can I do?

[@MacCoyzkie]

new pc build or was working before this problem occur? i also need to know what are your pc specs before i can advice

[@jobeberry2237]

So I have the boot light always on and I’ve tried everything you said but I still can’t get it to post I’ve swapped the storage and still got the same problem same with the cable and port

[@MacCoyzkie]

try to replace at least the data sata cable

[@kymchi250]

I’ve tried reseating my m2 but it still doesn’t get rid of the debug light and did the same with the hdd and it’s been only 6 months with it

[@MacCoyzkie]

if this is a new build then your system might need bios update

[@kymchi250]

@MacCoyzkie I want to but idk how cz it's not giving me any display and whenever I plug in my keyboard and mouse they don't turn on

[@MacCoyzkie]

@@kymchi250 what's the pc specs?

[@kymchi250]

@@MacCoyzkie I got a b550m-c motherboard Cpu is a ryzen 5600 Gpu is a rx 6500XT 16 gigs of crossair ram 500 gb of m.2 storage And 500 gb of a hdd

[@MacCoyzkie]

@@kymchi250 yep your motherboard might be using old bios, bring it to the shop where you got it from and let them update the bios that will work for 5600, but if you plan to do it yourself you need to watch this first kzbin.infonfH5Do3Dq3o

[@CorgiPuppie]

Could my ssd be full causing the boot problem?

[@MacCoyzkie]

yes or it could just be a faulty sata cable too or corrupted os

[@Seven-id5ig]

Did everything for the boot and vga lights and they still turn on im not sure what else to try

[@MacCoyzkie]

is this a new build? what's the pc specs?

[@Seven-id5ig]

@@MacCoyzkie yea its a new build the parts are AMD Ryzen 5 5600X 3.7 GHz 6-Core Processor ASRock B550M Pro4 Micro ATX AM4 Motherboard TEAMGROUP Elite 32 GB (2 x 16 GB) DDR4-3200 CL22 Memory Silicon Power A60 1 TB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive XFX Speedster SWFT 210 Core Radeon RX 7600 8 GB Video Card

[@MacCoyzkie]

@@Seven-id5ig your motherboard needs bios update, make sure you down the firmware version compatible with 5600x, if you are going to do it yourself just be careful kzbin.infonfH5Do3Dq3o

[@Seven-id5ig]

@@MacCoyzkie yeah main issue i have no display whenever I turn on the pc

[@MacCoyzkie]

@@Seven-id5ig most b550 motherboard got those flash bios button on its IO and you don't actually need display to update bios. check your motherboard manual on how to since each brand has its own way

[@amritcomputerworld]

I got different problem boot led always on a620m e but pc running fine. I cant turn it off

[@MacCoyzkie]

if pc is working fine you can just leave it but if its bothering you so much you need to update bios. for some reason most stock motherboards nowadays are doing that. tbh i will suggest you update it. be careful if you're going to do it your own kzbin.infonfH5Do3Dq3o or just bring it to a local shop and have them update it for you

[@amritcomputerworld]

@MacCoyzkie yup i am suspended its a faulty bios related issue . I am not touching it anymore untill its necessary

[@pbnjay21]

My boot light is on but I’m getting no display and I’ve replaced all my ssds and hdd and still didn’t work

[@MacCoyzkie]

have you tried using just one drive atm, remove any storage drive and just try the ssd boot drive with windows in it

[@josh1881]

My motherboard white light is on, but the display is working. I can't find any information on what the problem can be

[@MacCoyzkie]

im not sure what's up with the new motherboard releases nowadays, even with some people here and some of my clients are experiencing the same. it was fixed by updating bios compatible with the cpu, you can also do that just be careful if you're going to do the update yourself. more info here kzbin.infonfH5Do3Dq3o

[@josh1881]

@MacCoyzkie thanks I was thinking the same was just wondering if there were any other possibilities before I did an update. I have updated it, and the light is now gone. Thank you.

[@MacCoyzkie]

@@josh1881 glad its all good now

[@mimmuzzu56]

Hi Mate, If the VGA led is on, but everything works, I also play warzone 2 (170fps) why is this happening?

[@MacCoyzkie]

i think it's a bug from some of the latest motherboards right now, i had a viewer having the same issue and he has one of those gigabyte motherboard, he updated the bios and it all went fine. but before you do the same watch this first kzbin.infonfH5Do3Dq3o

[@Nunez87]

my PC is 4 years old and works flawlessly for all those years. Two days ago I noticed the CPU light was on and my front fans had stopped. Every other fan works including cpu fan and my pc works perfectly besides that. I have tried to change the fan sockets and I managed to get 1 fan working again (I have 3 fan sockets next to each other on the mb) now here's the weird part the fans all spin on boot but upon windows only one of the front fans continues to run. Could this mean it's my bios acting up for some reason?

[@MacCoyzkie]

sounds like low power draw from either a failing psu or power fluctuation in your house. what you can do right now is to bring your pc to a friend's house where there is no power fluctuation and have it tested there. you can also have your psu check using a psu tester like this kzbin.infoYrC3PlflLq0

[@Nunez87]

@@MacCoyzkie you just might be onto something! When I bought a new GPU, I didn't upgrade my PSU as the load was just within the rated W. This could very well be what is causing the problem. I haven't had any crashes under full load or tests, but it could be time just showing itself. Luckily it's an easy upgrade, thanks I'll look into it 👌💪

[@DavidPortillo-k1y]

I have signal on my monitor the white led light is always on I can game and do everything as usual just annoying to see any help I’ve tried reseating ram unplugging all plugs and making sure there tight also removed cmos battery only thing that takes off the white light but then after a day it comes back

[@MacCoyzkie]

what's your debug led?

[@thedetect1ve]

I have the cpu light and I’m not sure if that’s what’s causing my pc to shut off randomly

[@MacCoyzkie]

random shut downs may be something else, check this video for more info kzbin.info/www/bejne/mqbWq2iGbayAfbc

[@rainyy8132]

hello I have a question. i am building my first PC and the boot light is always on even though in the bios it tells me i have something plugged in which is my ssd. any idea what else could be the issue?

[@MacCoyzkie]

did you format the drive already?

[@rainyy8132]

@@MacCoyzkie I managed to get everything working shortly after commenting on your video. Thanks for the reply tho!

[@Evan-kj6ye]

hey so I have the vga light issue but the gpu works in another rig. I had previously bent my cpu pins so maybe thats the issue? But i straightened them so im sure

[@MacCoyzkie]

this might be the motherboard then, try a different gpu in it and if it does have the same result then the mobo might be done

[@Evan-kj6ye]

@@MacCoyzkie okay, how likely could it be a cpu issue?

[@MacCoyzkie]

@@Evan-kj6ye cpu are very sturdy and from my experience, i had a lot of motherboard breaking earlier than the cpu. the only way we could know is to test it with a working pc, if you don't have extra pc you need to bring it to a local shop

[@mrchief.-__-2051]

how about my motherboard powers on cpu gets warm but nothing not even Q led the Q led is dark only post 00 tryed another cpu and Dram but nothing

[@MacCoyzkie]

mobo might need bios update, depending on your pc specs

[@voxytm7287]

Hi, I have cpu amd ryzen 7600 and msi b650 m gaming plus motherboard. Using xpg 32gb 6000mhz single ram. When i am booting by using 1st to 3rd slot in ram. It is giving me red and yello light errror. Not booting. But when i using ram in 4th slot. Red light go away in 10 sec and after next 30 sec pc booting up. Not sure what is isssue, this my new PC not sure how to fix. Can you please help. Thank you for hear me out. Looking forward to hear from you.

[@MacCoyzkie]

the advisable slot should be the 1st one in a single ram stick build. shut the pc down, unplug it, place ram on the 1st slot, clear cmos kzbin.info/www/bejne/iWrLqniGiauFZ5I before power the pc back on

[@carl3549]

I got this problem today. But in my case i was playing a game then after exiting the game it turned garbage display suddenly then blue screen and then no display on monitor. So i unplug it then turn back on then this happened, ram led is on, all fans spinning but my kb and mouse not on and no display.

[@carl3549]

Update: It turned back on! I install my ram on slot 1 and 3. I think the ram slot is the problem. But i can’t OC it to 3200mhz why is that?

[@MacCoyzkie]

@@carl3549 it might be a faulty ram slot indeed but sometimes it is just dusty so clean the ram slots too. about the oc, answer may depend on the pc specs

[@carl3549]

@@MacCoyzkie maybe it's dusty coz i put it back now to slot 2 and 4 now it's working ang i set to 3200mhz it works now. But I'm just wondering can a dusty ram slot cause garbage display?

[@MacCoyzkie]

@@carl3549 more like it will cause a lot of problems and one of those problems is losing display signal

[@lukewages7116]

I just built a new PC and when I turn it on I get the boot led and a code 98 and it doesn’t post, any idea what it could be

[@MacCoyzkie]

if you are using asus motherboard, try to use a different keyboard and mouse. normal ones and not those rgb gamery peripherals your system is trying to recognize the input devices, such as keyboard and mouse.

[@TheBonneter]

I built my system without its GPU arriving and plugged my HDMI into my motherboard. the “BOOT” led on my motherboard is red and on constantly yet I still get a display and can use my pc without any issues at all. Thoughts?

[@MacCoyzkie]

this has been an issue ever since this year 2024 enters. most motherboards are like this for some reason. if you look into the comments there are a lot of people who had the same issue. you can actually ignore it but if its bothering you so much the fix there is to update the bios firmware. make sure the firmware is compatible with your current cpu because if you made a mistake you'll lose monitor signal. check this video too for more info kzbin.infonfH5Do3Dq3o

[@tutusrachmanto7658]

I just build this new pc. It's stuck on BOOT LED, i have tried reinstalling the ssd, and resetting the CMOS but not work. Any suggestion please?

[@MacCoyzkie]

might be incompatible parts, what are the specs?

[@BBPKID]

the Boot light is green and its still on after I did what you suggested in the video and no display signal I had just built the pc . I got the MSI MPG Z790 Carbon Wifi motherboard.

[@MacCoyzkie]

depending on what cpu you have you might need to update bios but check this out before you do kzbin.infonfH5Do3Dq3o

[@AG_247]

Mine has two leds always on: boot, vga.. so the bottom two. What now?

[@MacCoyzkie]

what's the pc specs? is this a new build?

[@VladyslavChapiuk]

Nice. But what if i randomly have CPU led light. Sometimes PC starts normal without problem. If it is started then it will work without any problem. If it is not i may need to hard reset it several times to make it run. What is the issue? PSU? CPU? MOBO?

[@MacCoyzkie]

sometimes you just have to reattach the psu pins on the motherboard, I fixed a pc recently with the same problem wherein i thought it was a faulty cpu but i tried a different psu, then it works, i thought it was his psu but when i tried this pc with his psu again and it worked. just need to reattach the psu

[@VladyslavChapiuk]

@@MacCoyzkie thanks! I will try it. Hope it is just PSU

[@jonethmontoya3532]

What’s the problem if the Dram light is blinking sir? What’s the problem? Is it the power supply? What happened on my computer is the dram is flashing but the air cooler has a ticking sound and it won’t boot. Can you help me regarding this matter sir. Thanks for your feedback!

[@MacCoyzkie]

its trying to read it, try to reseat the ram sticks or use the other slot to check

[@Sotorious4Life]

vga light is on i can get to windows but it dasnt let me get into bios , and when iam closing my pc i get thte monitor message check signal cable iv tried everyhitng execpt changing mobo or monitor, i will try to test it another monitor but i know it will not do anuthing different

[@Sheriff-Woody]

I haven't built my pc yet. I'm currently in a BIOS update as I type this. My motherboard is stuck on the CPU debug led. I have nothing connect to my motherboard accept the power supply for my BIOS update. What should I do?

[@MacCoyzkie]

i think that's normal if there are no other parts yet

[@Sheriff-Woody]

@@MacCoyzkie Thanks. I turned off the power supply and built it everything seems fine

[@manhnguyen-uy3yu]

Hi Mac, excellent video but I have a question. My boot light is on when I turn on my pc and no signal comes through to my monitor. When I put a windows usb in, the light disappears but still no signal and my pc turns itself off after a few minutes. Can you help me with this one please.

[@MacCoyzkie]

your ssd is not detected, try to replace the data sata cables and make sure it is connected properly

[@manhnguyen-uy3yu]

I currently only have an M.2 ssd installed, do I need a Sata ssd ?

[@MacCoyzkie]

@@manhnguyen-uy3yu i see, try to remove and place it back again clean any dust if there's any afterwards clear cmos kzbin.info/www/bejne/iWrLqniGiauFZ5I if that does not work you need to have the m.2 check in one of your friend's pc to see if it's working

[@arapo1001]

I just built my pc and the DRAM is lit on. Nothing worked. I have a ASROCK motherboard and every other part is corsair branded. Please help😢

[@MacCoyzkie]

what's the pc specs? maybe the motherboard just needed bios update that will work with your current cpu

[@arapo1001]

@@MacCoyzkieWell the screen doesn’t show anything when turned on. I have a list of what I ordered if that helps.

[@arapo1001]

@@MacCoyzkie CPU: I5 14600KF CPU Cooler: Corsair A115 Motherboard: ASRock Z690 Extreme Memory: Corsair Vengeance RGB Pro 16GB(2x8GB) DDR4 Storage: Lexar NM710 2TB M.2 Video Card: MAI VENTUS 2X RTX 4060 Case: Corsair ICUE 4000D Power Supply: BitFenix BFG Gold ATX 3.0 Case Fan: Corsair LL120

[@MacCoyzkie]

@@arapo1001 The ASRock Z690 Extreme ATX LGA1700 Motherboard supports the Intel Core i5-14600KF 3.5 GHz 14-Core Processor with BIOS version 15.05. If the motherboard is using an older BIOS version, updating the BIOS will be necessary to support the CPU. you can actually ask the store where you got the motherboard from to do the bios update for you, assuming their store is near you. if not the local shop is your only choice or you can do it yourself. just be careful though, more info here kzbin.infonfH5Do3Dq3o

[@arapo1001]

@@MacCoyzkiewhen i turn on my computer it’s showing no signal

[@Zer0Playr]

Already did everything and still not working. Cpu Led still red. 5700x, can't be the problem, bought it a month ago.

[@MacCoyzkie]

you need to check the cpu pins if there is any bent pins

[@Zer0Playr]

They're not, I already checked it :) But still didn't work :(

[@MacCoyzkie]

@@Zer0Playr were you able to use it before or it doesn't work since you build the pc?

[@Zer0Playr]

I was able to use it b4, but no need to worry, I've sent to a local shop, hope they can fix it, tyvm 😁

[@MacCoyzkie]

@@Zer0Playr oh ok, i hope it all goes well

[@cadetsparklez3300]

something very odd happened, im in the os, everything working fine, and the gpu/vga led is on

[@MacCoyzkie]

you might have the latest mobo in 2024, for some reason they are like that but it could be fixed by updating bios. just be careful if you're going to update it yourself kzbin.infonfH5Do3Dq3o

[@elisaufferer8827]

my boot ez debug light is constantly running, but i have a display and im in bios.. help?!

[@MacCoyzkie]

it happens to many new builds nowadays for some reason, even with some of the comments here. the fix there is to udpate bios, make sure the bios firmware is compatible with the cpu. and a bit of warning before doing it yourself kzbin.infonfH5Do3Dq3o

[@andrablasto2841]

Hi, i just got the issues with vga led light on, i was playing a game then the screen suddenly goes blank. I've tried to power it back on, but then the pc beeps, 1 long beep n twice shorter beeps. I've tried to unplugged the gpu card, but the pc still beeps and the vga led is on, so goes when i tried the dram. My specs are MSI H310M pro v plus, intel i3 9700, 8gb radeon sapphire, i hope you could help, thanks

[@MacCoyzkie]

the beeps means motherboard can't detect the gpu, if you already tried to reseat the gpu and its still the same then the gpu might be the problem. Have the gpu tested in your friend's pc to double check and if you have the same results perhaps the gpu is done

[@andrablasto2841]

@Mac Coyzkie thank you for the reply, i think im going to do what you're suggested, and i hope my gpu's okay, considering how much gpus price nowaday, thanks a lot 🤝

[@MacCoyzkie]

@@andrablasto2841 no problem bro, i hope it all goes well too

[@elkush-_3034]

I just updated the nvidia drivers and all the sudden my pc wont show display vga light is on and boot light is on but its on green the pc runs fine but no display any help would be gladly appreciated thanks

[@MacCoyzkie]

try to enter safe mode this way kzbin.infoIZKc8plksDA and if you got in there ddu the gpu driver kzbin.info/www/bejne/iaese5uZrb-HqaM after that just download a fresh one

[@bumblefoot5]

My PC works fine but sometimes the boot light stays on the motherboard when I get into windows and just stays there. It happens maybe 1 boot out of 6. A restart clears it. Im using an m.2 drive reporting no problems in testing. Feels more like bad motherboard bios/software.

[@MacCoyzkie]

yep, for some reason these motherboards released this year or at least the old bios is causing this. nothing will happen if you don't update it and your pc will work just fine, but if its bothering you so much you can update the bios, make sure the firmware is compatible with your cpu, and be careful, more info here kzbin.infonfH5Do3Dq3o

[@bumblefoot5]

@@MacCoyzkie Happens on multiple bios so far. Even on a beta bios to test now but still happening occasionally. I also have crazy issues with their GCC software and RGB thinking their the wrong colours. What's annoying is I picked this board cause I had a x570 aorus elite before. It never had any issues ever over 2 CPUs. Legit uninstalled all the GCC crap but lose ability to change the little screen on my rx 6800 master gpu. I eventually managed to manually delete gcc and keep the screen at the last thing I set it to. Had to leave rgbS working from default bios as rainbow puke lol. Only other software I've found to override the wacky GCC RGB settings is signal RGB.

[@bryansullivan9588]

I have a gigabyte x670 gaming x ax v2 motherboard everything is working i have a red light on my mobo that stays on is that normal

[@MacCoyzkie]

if the pc is working fine you can just leave it for now, I got several clients who had the same issue, pc is working but the debug led lights up steady. we update the bios compatible with their cpu and it works just fine afterwards, no more debug led lighting up. though some of my clients just let it be and nothing really happens in their pc, they are still gaming in it

[@alannieto4958]

I have a problem My PC turns on but a light appears on the boot and it doesn't give video. Everything is well connected and the bios is updated. Does anyone know how to fix it?

[@MacCoyzkie]

you might have a faulty boot drive, try a different one to confirm this theory

[@alannieto4958]

I have update with a ryzen 3 1200 and it give video but when i put the ryzen 5500 it doesn't give video

[@delita0057]

what if dram light about 2 sec then vga lights about 1 sec and then gone? why is that

[@MacCoyzkie]

motherboard was checking the hardware, if it lights on and off means it's working. if the light becomes steady means its not working

[@wazzupolpy]

Hello sir, my pc suddenly shut down when im playing game. After that, I try to power on my pc but: 1.The monitor didnt have display and my keyboard and mouse's rgb didint light up 2.My pc dekstop rbg is light up but after 1 minutes(not exactly) it restart by itself 3.Cpu debug led light on when it restart and it light off after several seconds and dram debug led light on after that until the pc restart again Do you have any opinion why this happening and how this problem solved? Thank you

[@MacCoyzkie]

sounds like a faulty psu or low power from outlet. Low power from outlet happens when there is power fluctuation around your area. To check your psu you need something like this kzbin.infoYrC3PlflLq0