Connecting a mixer to an equaliser,a crossover and an amplifier

we are located at the junction of luthuli and kamae Road, our shop is the ground floor of lucky house that's the 2nd building on the left...
we deal with a variety of sound equipment and musical instruments,
we also offer after sale service to our esteemed customers.
our prices are the most friendly compared to other shops ,
come experience professionalism at an affordable rate

[@emmanueledet8334]

❤❤ I'm grateful. I was really looking for this. Thank you very much, Boss. Your explanations are very clean and simple. From Nigeria.

[@Gladingson1]

My first time seeing your channel but you are an amazing teacher....God bless your heart and team

[@decibelaudiokenya]

Waaaaoh thank you

[@emediongessien2280]

This is the best and simplest explanation I've had on this subject

[@edgarcabatingan9883]

Thank you for your vlog about how to connect mixer, equalizer,cross over and amplifier tutorial vlog it's difficult to have a wonderful connect ion.thank you again for your vlog brother.

[@isotuadonye303]

Very educative. I'm new to learning sound. I found this video very helpful. Thank you very much.

[@michaelpelumivictor5711]

Bro Thanks, so much I really appreciate what you did God will blessed ur work in Jesus name. Am also sounds engr from Nigeria.

[@rickcir8945]

Clean music, clean explanation! Thanks sir!

[@okwoweshedrack5044]

This is exceptional. Thanks a lot. All the way from Nigeria

[@silentnote2591]

Keep posting videos like this,very simple to understand, thanks for the video.👍👍👍

[@benbob3498]

God bless you brother. Very clear video. Easy to understand and learn

[@extremebeatzlib5429]

Thank you so much Decibel Audio, this is the best tutorial I've watch on this subject.

[@tengsranggabil8014]

This is great for the beginning of sound mixing thanks so much brother for Sharing your knowledge 💞 just love it

[@N3yo100]

like the other brothers said short sweet simple cleared up lots of things for me thank you!!!

[@fvcminisounds1347]

Good tutorial sir I appreciate this vedio..thanks for sharing this content ❤continue to cheers this 👍

[@jimmywilliam7016]

This is the best explanation that I ve seen.very clear and very precise. Well done.can you do a tutorial on outputs on a mixer.explain where each outputs lead to.

[@jonnesmasila3624]

My first time here but this is exceptional! Planning to come for some musical instrumentl.

[@bimatvug]

Woww...just wow. With so little you have managed to deliver sir. Very important video you just shared. I am starting a PA System and i have been looking for such. Didn't know the use of the cross over until now.

[@decibelaudiokenya]

We are glad you got the some.little knowledge to jam start your sound journey 😀

[@ManoChannelTuNelysk]

Crossover is basically meant to separate the signal into dedicated frequency ranges for different speakers. In digital realm you can achieve very similar results sending your LR signal into Matrixes and filtering the sound in dedicated EQs. For example, using a low pass filter at 90-100 Hz separate the lows and send them separately into the Subs, then using high pass filter at the same frequency on a different Matrix and send the rest into the Tops...also, it could be done in more detail and separate the mids and the highs too, but it depends heavily on what speakers you are using, what inputs you have and all that jazz.

[@FavourGlory-ky8ob]

I'm a sound engine looking for good place to sound

[@desmondwanka-david6255]

Thanks.... I really do appreciate..... From Sierra Leone

[@decibelaudiokenya]

Much love from kenya

[@brotherbranhamchristianmuh2935]

I appreciate the tutorial it's really professional

[@jojomwangi]

BOUGHT THIS CROOSOVER AT BAMBURI 3 DAYS AGO THANKS TO YOU

[@djheroboi]

U're really a good teacher...I wish to join you for an upgrades

[@MemoGrafix]

No he's not a good teacher. He should have everything he needs to teach read to be shown for a how to do. Good teachers will set up display ALL the items of a subject before properly and not with a camera to make a person feel dizzy. Not that it made Me feel dizzy, but his camera is not steady. All that equipment and no tripod/other for his phone? That IS NOT a really good teacher.

[@nkululekomyeza306]

I have watched so many videos but I haven't seen a video that explains the way this one does.

[@fixnreview]

That set up manipulate the pure sound & creates unclean signals, increasing unwanted frequencies going to the amplifier. But it works!

[@manglembameitei3022]

Good and clear explanation of using both the EQ and xover thank,s bro i appreciate your video,support for newbies.

[@babuentertainments6341]

Very good job and very,very,neat and clean explain nice vodeo bro

[@jr.rasentertainment4074]

Thank you for sharing your experiences. Watching all the way from Vanuatu 😀😁👍🔥🔥🇻🇺🇻🇺🇻🇺

[@decibelaudiokenya]

Big ups 💪 my brother much love from 🇰🇪

[@kevinochieng1439]

I like it, bro... This is very important for some of us who are still learning

[@salifupaul2071]

Thank you so much. You make it so simple

[@samisaac3908]

Thanks for the video, well explained. My question is, how do you connect an Equalizer to a crossover if you are using two amplifiers, one amplifier for mid-speakers and the other amplifier mainly for subspeakers.

[@janicee.martinez3570]

Yeah how is that done

[@FTGp523]

F I have the same question sir thank you

[@ajprac4896]

That's so educative. ....and what about adding others like the bass enhancer and the compressor. ...please I need a video on that too...

[@decibelaudiokenya]

Coming soon

[@githuikimondo9692]

asante... I've never used an equilizer in a sound system but I sure know the goodness of having a crossover especially for the subs

[@nk-moza]

so does it mean you can still setup like that but eliminate the equalizer and still have good sound?

[@githuikimondo9692]

@@nk-moza yes you can. Just connect signal cables from mixer to the crossover then from crossover to amplifier. Actually what really needs to pass through the crossover in such a setup is the signal you intend to send to your subs

[@mayorgajam356]

very nice demo sir..but all your equipment has so expensive price in the philippines..thanks for the idea

[@decibelaudiokenya]

You are welcome.

[@Funbizhub]

Thank you so much for this video. It really helped me.

[@MCPrincedee_Events]

Keep it uu with this good Work. It's such an educative and resourceful video.

[@ralphups7782]

good explanations, on how to set up. the only thing I would do differently is plug power leads into equipment first and switch them off in case of sudden power surges.?

[@michaelturkson9378]

Wow! I love this! Masterpiece 👌❤️

[@decibelaudiokenya]

Thanks for the love

[@langstonpaul]

Excellent video for me as a bigginers👍👍👍

[@VeronicaTaimbari]

Good explanations..Love this 👍👍👍💓

[@emmykeysmichael3429]

Good job bro Very impressively perfect 🥳👏🙌

[@jaredranginya7959]

This is great explanation, thank you sir

[@michaelturkson9378]

Big ups from Ghana 🇬🇭

[@rangsinghrang1139]

Thank you so much Sir for you teaching us...

[@zedzone1971]

Love from India Kerala bro❤

[@brianbaker5640]

Excellent video thanks for doing this.

[@BeatzbyManel]

I didn't think it'll be profitable buh.. you beat my expectations love from naija

[@decibelaudiokenya]

Much love bro

[@kilatanakusingkilat4468]

Amazing video and sound systems

[@immanuelchukwudike]

Thank you for this... Using this connection how many full range speakers can you power with this? And what if you need to have separate control for stage monitors and main house

[@paulkpianist]

Good job your video was so informative

[@KRUPA.SOUNDS]

Osam brother tq for teaching blessed more videos

[@olatunjiakinpelu7799]

Good job I enjoy and learn.

[@samuelkaranja7193]

Great explanation

[@banaddawarichard4555]

You are a good teacher

[@multiempireent.3017]

absolutely informing Will visist your store for more

[@agnesadrienbonaventurenome5552]

Thangs you. Bonaventure of Côte d'Ivoire/Africa

[@century_centure]

Nice tutorial. On the output results the mid was to high. That was noise to me. I recommend reducing the mid volume from the power amp

[@cristovaoalberto6755]

one love from Namibia 🎉

[@nkvcutz9167]

Nice explanation

[@Deejaypuyol221officiel]

merci pour les explications

[@drewnashty]

Straight Outta Kenya! Cool video

[@decibelaudiokenya]

Thanks for the love ...respect ❤️

[@victorlunayo3587]

Always the best decibel Maina thanks

[@decibelaudiokenya]

My pleasure!

[@champajayawardena8603]

Great job

[@chaly839]

This is very educative and helpful. Can one bypass the amplifier if he is using the active speaker?

[@ishmealksesay5560]

One love from Sierra leone 🇸🇱

[@decibelaudiokenya]

One love ❤

[@Kakambu]

The best explanation 💗💗💗

[@djcassidyghana9019]

Thanks bro this is very educative

[@paulkong136]

This is amazing thank you sir

[@rangsohshang243]

Thank you s much sir... You teach me a lot😊😊😊

[@decibelaudiokenya]

Am humbled 🙂

[@RavirajaShetty]

Nice..

[@edwinubod0405]

good video tutorial but i nees to learn more to understand. i got Peavey CS 3000, two times burn right channel because i was connected to power mixer.

[@johngerea6975]

Your lessons are helpful you got 5star for that.

[@decibelaudiokenya]

Thank you glad they are helpful

[@essaudio233]

Hello i from Indonesian 🙏❤️🇮🇩

[@mwigarleysaid5406]

Waoo that is great 🇹🇿🇹🇿🇹🇿🇹🇿❤️❤️

[@keeplarsayentertainment5262]

Great content sir 🙏🏽🙏🏽🔥🔥🔥🔥🔌

[@AdeyeyeTestimony-gx2kr]

Great explanation 😃 but some part are not really clear I think the camera 📸

[@SRNStudioA]

Lovely bro. I learnt alot from your vlog.

[@eddiekidd1760]

Nice Work... !!! 🎶🦅🎶

[@SanjaySarkar-tq5lg]

Very nice

[@peterpaulsamoranos5784]

Very nice sounds ser.good job..

[@richardkoomson6735]

very good for me as a beginner in sound production

[@decibelaudiokenya]

Glad to hear that!

[@eliezervictorychurch]

Great job well done

[@banang3908]

God bless you for sharing your knowledge with us. But I you can give me the title and name of the artiste musica you play sometimes, i we be very Great. I want to downlode it. Thanks

[@jewelkieran7265]

Just what I needed. Thank you so much sir for this. I do have one question though. How can you put the sub in one channel and mid in another in a left and right (stereo connection?)

[@francisxavier4351]

Good informative video. ...

[@NGR037]

Thanks bro I'm learning a new thing

[@ralphmusindi2]

Awesome staff

[@cristovaoalberto6755]

you have my respect 🎉

[@Vuvi-jr]

Thank you bro for this audio

[@deejaygriffin256]

Best and cool. From Uganda

[@henryattah807]

The best video have seen

[@Limitlessmckevin]

Good work bro, need to know the name of the song that your testing with, it has really blessed me.

[@stephenmule5456]

gud work i like the lesson

[@user-mf4vq8bo1k]

Akkuna matata bro from india😊

[@decibelaudiokenya]

Hahaha hakuna matata

[@MutlaThomas]

Very well teaching

[@samuelaidoo3468]

Hello Decibel Audio Kenya, am Samuel in Ghana and i love watching your channel. My church is having challenge with our church sound for many years which is reducing the church congregation. We have lots of equipment's (devices) but have challenge with our sound. We are using yamaha MG24/14FX mixer, dbx 166Xl compressor, dbx 231 graphic equalizer,MC100 sound enhancer, behringer multicom Pto-Xl audio interactive and dbx 234XL crossover... kindly assist me on how to connect these devices and and how to do the setting to get a good sound. Please help to build up mu church again. God bless you.

[@user-de1ms4dr7j]

Thank you so much brother 🙏

[@djtwinboyeverblazindeejay4407]

Awesome explanation...thank you..

[@NEHEMIEMINISTRIES]

Thanks bro for this

[@holywaterandgreentea]

Excellent Thanks

[@idongesitchristian5759]

This is really nice

[@princeemmanuelsmart7506]

Nice one, God bless you

[@decibelaudiokenya]

Thank you