Decision On The K1 Micro & Pond Treatment Video 7

[@Simoj82]

Just watching some old videos not seen them in years fair do's this set up worked spot on water clarity was perfect 👍

[@Wrighty]

Hi Simon, Thanks mate, it's good to reminisce. It seems a long time ago to me. Terry.

[@Bl4ckVV0lF]

Absolutely love your videos, please keep sharing your experiences. Your pond looks amazing!

[@Wrighty]

Peter Frans Thanks Peter, will do my best. Terry.

[@stevetat66]

Hi Terry great set up , your video's have inspired myself to build a new pond I have had ponds in the past but always suffered with cloudy water but your DIY Filter system looks great and shows in your water clarity , thanks for the great advise here goes. Steve

[@Wrighty]

stevetat66 Hi Steve, Thank you, Glad to hear you're back into one of the best hobbys. Everything you need to know is on my website diypondfilters.com You can always contact me from there if you need help with anything. Good luck with the build m8. Terry.

[@Brendan77132]

I have to say that these videos on filtering, parasite treatment and general fish & pond upkeep have been tremendously educational for me. I have wanted to keep koi for many years, but as I have previously always had young children I couldn't risk having a pond deeper than the kids could stand in to their waist, this would not of been fair on the Koi. I am in the process of hand digging my pond at the moment and making sure I have thought of everything before the point of no return. In the evenings, tired after hours of digging I watch your videos and it spurs me on no end. So thank you so much for your help and keep up the great videos. Brendan.

[@Wrighty]

Hi Brendan, Thank you for your kind comments, and your very welcome. Have you seen the 5 videos on my new pond build? Good luck with your pond build and I hope all goes well for you. Thanks again, Terry.

[@Zelaznogsiul-63]

Great looking pond, the filtration system works great. Thank you for the video, it gives me ideas on what to do when I do my own pond. My only concern is high water temperatures, I live in Florida. Great video.

[@Wrighty]

Hi Luis, thank you, and your very welcome. Good luck with the build. Terry.

[@2e0wsj]

Keep up the good work well done

[@Wrighty]

Thank you, very much appreciated, Terry.

[@50f150]

Very nice setup great video

[@Wrighty]

50f150 Hi and thanks m8. I must apologize about the commentary, I'm not the best. Terry.

[@randydandydan]

Another superb video mate great job 😀

[@Wrighty]

randydandydan Thanks m8.

[@andytrevino6771]

Love this setup! Can you show details on the build? What does the inside of the barrels look like.

[@Wrighty]

Hi Andy, and thank you. This system has been updated quite a few times now. It's now called The Pro Mk2 filter. You can find all the details and build plans on my website: diypondfilters.com if I can help further, just give me a shout on [e-mail] Thanks again, Terry.

[@SuperJimib]

Great video's. learn't lot's here, and i love your filter, Keep the vids coming

[@Wrighty]

jimib B Thanks m8, your very welcome.Terry.

[@bonzo7doggy]

Wrighty andy mclellan all going well, never been so clear. whats the name of the new air pump

[@Wrighty]

***** Hi Andy, Glad to here all's well m8. The air pump is a Hailea AC Series. Piston Pump. 82 lpm. Terry.

[@wythymanc5059]

Hi Terry.Such a simple setup.But what a superb filter system i think you could teach the professionals a thing or two keep up with the vids m8

[@Wrighty]

***** Thanks m8, I had no idea when I built it just how popular this filter would get. Your comments are very much appreciated. Thanks again m8 Terry.

[@806rambo]

Super job! How many litres of K1 is in the "floating" barrel?

[@Wrighty]

Hi Max, I had 50 ltr of media in each barrel. Have you seen the new up-flow filter I've just built for polishing your water? kzbin.info/www/bejne/epDOl4t8ac9khdk thanks Terry.

[@Ronaldk4getstuff]

hello Terry yes I keep an eye on the water levels. they are normal for a new cycle. and now that the gravel filter is in full operational mode. it will be 4 week's before they settle down. I posted the diy gravel filter start-finish update 3. I added a mention of your channel at the end of the video. thanks for replying, it is much appreciated. Ronald k4get

[@mikeeljahosafats3231]

Excellent!!

[@Wrighty]

Thank you Mikeel, very much appreciated, Terry.

[@jamesharper6221]

Can you explain each tubing you have on your barrels? This looks a little different then the video of yours I was trying to find. I was going to have just tube's to transfer water from 1 to another,as well as draining pipes.

[@magzire]

I notice those evo bio balls do wonders for algae. Used it 3 times, after one week all the algae is gone. On liner also.

[@Wrighty]

Great info mate, Thank you. Terry.

[@MrSpauldo]

How often do you clean the k1 and how, I have a 12000 gallon tilapis pond thinkingof adding it but its expensive

[@steelersgod]

Hey Terry another great video. About that air lock you were talking about. On my 2nd tub the force of water pushes my media away from one side. How is it you don't seem to have this problem? Any idea's on how to stop that? I can send you a photo or video showing you if this doesn't make sense. Thanks again.

[@Wrighty]

Ron Yelenich Hi Ron,Nice to hear from you m8. What drop do you have between tubs. You only need about 4 inches. The media being moved away from one side is because the water entering the tub from your connecting pipe is coming into the tub too fast. If your unable to reduce the drop between tubs I would put a T on the bottom of the connecting pipe to share the flow to each side of the tub and steady the rush of water. Regards Terry

[@steelersgod]

That sounds like a good idea. Thanks again.

[@Wrighty]

Ron Yelenich No worries m8. Your welcome.

[@youtubeaholic2154]

If there is no screen on the ends of the drains, how do you keep the media in there when you clean the tanks? Wont the media just flow out with the junk?

[@paulparker1830]

Hi Terry, I came across your videos and I think they are fantastic. For many years I have always wanted to build a Koi pond but never knew which direction to go as far as construction type, when I get round to it I have decided to build mine from green treated softwood railway sleepers approx 4 metres long, 2.5 metres width and 1.2 meter depth, would your home made three barrel K1 filter system be better than these vortex multi chamber systems that can be purchased, also what sort of pump would you recommend. Thank you for your amazing videos. Regards Paul Parker

[@Wrighty]

Hi Paul, Thank you for your kind comments. This filter has been updated since this build as you can see in this video. kzbin.info/www/bejne/mGW3aYehh7mLd9E The filtration this gives is equal to the world famous Nexus filters. It gives the same if not better filtration at much less cost. I make your pond volume around 12000 ltr on the pond size you give, which is 2640 UK gallon. This system on 200 ltr tubs would easily do the job for your pond. Your pump size should be able to turn over your pond volume every 2 hours. This would make the pump 6000 lph but you have to add some for head pressure loss. This is the pump lifting the water above ground and the pipe work that slows the flow. I would look for a pond pump around 8000 lph. I'm not sure what you know so sorry if I'm telling you what your already aware of. You can find out more information on my website diypondfilters.com Hope this helps. You can also contact me on [e-mail] I'll help all I can. Terry.

[@paulparker1830]

Hi Terry, thank you so much for your advice and contact details it's very much appreciated, I'll visit your website and continue to watch your videos over and over again. Paul

[@YimmersKoiNReef]

Subscribed! ❤

[@Wrighty]

Hi, thank you and welcome to the channel. Terry.

[@vissersven]

What if u fill up the middle one first? At least up to the level that the pipe is full with water. Air being pushed up.

[@Wrighty]

Hi Sven, I know what you mean mate, but filling the middle one first is difficult as the inlet from the pump is on tub 1. This is quite an old video and this filter has been upgraded quite a lot. Have a look: kzbin.info/www/bejne/mGW3aYehh7mLd9E thanks, Terry.

[@gomesgomes9538]

What size pipes did you use on your filters?

[@harrychung433]

Another great video, Terry. Thought that last filter looked out of place with only one outlet. Any issues with your airlines or drains blocking up on you?

[@Wrighty]

Harry Chung Hi Harry,Thanks m8. Must admit I'll never make a TV presenter lol. There was no real need to make the moving bed filter twin outlets, It's just that I had the parts spare, and they are more efficient and like you say it does look a lot better with the two. I've had no problems with airlines or drains m8. The only thing I had a problem with was the filter cages on the inlets like I showed in the video blocking with algae, which I removed. Why, have you had problems? Terry.

[@harrychung433]

Wrighty A friend on mine set the drain fitting a little too low and the sediment built up and started blocking both the air and drain. Couldn't understand why it kept burping at him. Big pain in the rump to drain and replace the barrel.

[@beardedgaz]

were did u get the end caps for the pipes please

[@xsessivemikejenkins]

i built your 3 50 gal barrel filter and think i put to much media in each batrel. how much media did u use thanks mike

[@Wrighty]

Hi Mike, You can run up to 65% of the water volume of each tub. I run between 50 and 60 ltr K1 per tub. Terry.

[@trongngo08]

I like to know what is black unit control on/off call and where to buy it thks

[@oddienyirenda5206]

How much k1 do you put in each Burrell

[@mini59me24]

I just have to ask you this... The line in from your pump seem to be on the smaller side (looks like 32mm or so) - I used to have a Oase Aquamax Eco 16000 pump with 32mm line to filter and return to the pond and the flow from this pump got severely restricted due to the pipe size resulting in that the pump died 4-5 years later. Ive since upgraded to the variable speed Aquamax Expert 21000 where it was advised that I used 50 or 70mm pipe all the way. So if you feed all your water from your pump through this filter I bet your pump would be under constant stress resulting in a premature death due to the pipe and hose sizes (the hose you used going into the filter would also cause alot of restriction due to its spiral profile - much better to use straight hose sized properly or pvc pipe going into the barrel. I am now looking at adopting your filter system and wonder if the flow in and out need to be based on the 50mm pipes throughout (as my line is built using 50mm pipe) and if the filters would be able to handle the full force of what this pump is capable of (or perhaps I should look into splitting the line so only part of the pumps feed goes through the filter?

[@Wrighty]

Hi, The main line from the pump was 32mm but I changed it to 43mm which as you say was a lot better. I don't think you'll get all that flow through 50mm pipework without problems. The Pro filter is on 3 inch pipework and it does work really well. I have moved since this filter and have built myself an RDF (rotary drum filter) as show in my videos. If I were you I would look at least to have 3 inch return pipe with the size of pump you have. Terry.

[@mini59me24]

Sorry, but you lost me there - "... all that flow through 50mm pipework without problems"...? 50-70mm is way better than 40mm as it puts less or no stress on the pump. The pressure loss would be a lot less across the line. - If like you said, you used 40mm pipe from the pump to the filter, you wont increase the pressure going out - The opposite really as you would loose pressure along the line. So going from 40mm (in) to 70mm (through and out) dont make any sense. If 50-70mm pipe is used from the pump, then the same size pipe work ought to be used all the way through these barrels as this would preserve the overall pressure to/fro the pond. My little question on this was if these filters would handle it or if a slower rate flow needs to be applied on these filters (which simply could be achieved by splitting the pump feed and using a a valve allowing part of the feed bypassing the filters and part (just enough (whatever that might be (!?) go through the filter? - sort of what I have done now with a lot smaller bio filter that cleans, but is undersized and is painful to clean (foam mats :( ) - Havent seen any info in what you figure on Liter /minute that these filters best operates on.

[@Wrighty]

Water in 50mm pipe gravity return is not going to flow as fast as water being pushed through a 50mm pipe by a 21000 lph pump, unless you have a lot of head pressure slowing the pump. The rule of thumb on this is that the outflow should be twice the size of the pump fed inflow. Flow through the filter depends on your pond size. You need to look to turn over your pond volume once every 2 to 3 hours. Flow through the filter with 3 inch pipe at most wants to be 8000 to 10000 lph for good filtration. You won't get that through 50mm pipe.

[@mini59me24]

Hi Wrighty. What you say dont make any sense. The rate of water in will be the same since the pipe is the same size and the barrels is below the feed - you would loose some pressure by pushing water into the barrel from the bottom up, until it hits the barrel exit - The would slow the flow rate. the slotted output would also slow the flow rate. so the exit pipes would not have any impact on whats going in. If anything, the slotted output would restrict the output flow making a large input problematic. Pipe length and diameter will preserve water pressure - you can not(!) increase the pressure by adding larger pipes down the track - its the input diameter that would dictate what you can do along the line and out. Not wanting to go into an argument on this, but Im not buying what you said (unless you can prove this somehow) - it contradicts everything to do with what I learnt over the years and what I have been advised by various professionals. - Still interested what you estimate the flow rate into these barrels should be?

[@mini59me24]

Hi Wrighty, follow up on what I just said... The slotted output from your filter is what (if anything) would/could cause issues. These slots would restrict the output from the drum resulting in an overflow problem (unless(!), you somehow sized these slots across an area where these cut out slots equal the input pipe dimension - if done correctly you would not loose any pressure or flow (other than the loss of pushing water upwards through the drums) - So I think your slots is your critical point - Not(!) the size pipes going from one barrel to another. - hope that makes sense

[@PalJoey-rm2yh]

1) Have you considered why the UV is not handling the parasites (depending on which one is actually causing the problem, i.e. if it's water born or not)? Have you wiped down the bulb to ensure good light penetration into the water? 2) Your filter is now ultra efficient with three bins of media, but you are still showing hair algae coating the inside of the pond. It's because the filter carries the nitrogen cycle as far as it can: nitrates, but you have very few plants to use the nitrate and phosphate in the pond water. I'd still cover about half the water surface with floating plants and use some edge plants like rushes or taro. It's a different visual mindset, a more mysterious and 'natural' look to see the fish swimming into the clear areas from the planted ones, but one I find more pleasing, and it should keep the water ultra clear and the matted algae at bay. -------------- How is the medication working?

[@Wrighty]

PalJoey1957 Hi, I have to get a microscope to know exactly what I'm dealing with really. I keep saying I'm going to get one but haven't yet. I will take the bulb out my UV and clean that. I have split the flow through the UV to slow it down. When I was In the garden centre last week I ask for water hyacinth but they told me it is to early for them. I do have 6 large lilies and some other plants in the pond. I have also done several water tests and am getting 0 on nitrates. So I wondered if it was my test kit as I thought I should show some on a mature pond, so I've just bought a brand new kit and I'm still getting 0 nitrates. also 0 nitrites and 0.2 ammonia on the last test. Thanks for your advise, it's very much appreciated. Terry.

[@PalJoey-rm2yh]

Wrighty It sounds like you're going full bore at the problem, so I'll shut up and let you follow up. Get the plants. I have yet to see a well planted pond that was not healthy. P.S. that UV bulb should probably be wiped down every month or two, but you'll be able to see how fast it gets coated.

[@Wrighty]

PalJoey1957 Will do m8. Thanks again. Terry.

[@MrAm1400]

what is in the white thin tubes going from one tank to the next?

[@Wrighty]

MrAm1400 The half inch pipework is an airline. On tubs 1 and 2 it's for cleaning and in tub 3 it circulates the media. Terry.

[@MrAm1400]

So when i purchase the plans it will be in Detail? Also when i click on the defuses (grey with slits and the cap on top) that you are selling, i can't combine it with the plans, Why?

[@Wrighty]

MrAm1400 Hi, the plans are in detail but if there's any thing you wish to know I'm always here to help. The filter cages are sold in a different shopping cart because they are an order to be shipped. Where as the plans are a digital download straight to your computer. Hope this helps. Terry.

[@master6676]

How many gallons or liters of media do you use in the filters?

[@Wrighty]

Jim White Hi Jim, In Tub 1. I have 50 ltr K1. in tub 2. 50 ltr K1 Micro. and in tub 3. 50 ltr K1. Terry.

[@master6676]

Thank you sir.

[@craigkane9723]

Can i ask y you turn the air off at night?

[@Wrighty]

Hi Craig, the air in barrel 3 must run 24/7 to keep the bacteria alive. Terry.

[@dskoi7358]

How much K1 media are you using in each barrel?

[@Wrighty]

D S Koi Hi,I have 50 ltr of media in each tub. Terry.

[@markpool5128]

Hi Terry, I will be treating my pond this weekend even though there is no evidence of any parasites, will this do any harm?

[@Wrighty]

Mark Dauncey Hi Mark, I know a lot of people that do treat there koi after the winter as a precaution. As long as your very careful with the dosage and follow the instructions on the bottle, and are 100% sure on your pond volume I don't see a problem. Mix it well with pond water first as in my video 7. Terry.

[@top2bottom291]

✋👍👍🤝😎👍👍👍

[@Wrighty]

Thank you, there is a new version of this filter out now. You'll find it on my website diypondfilters.com its now called the Pro Mk2. Thanks, Terry.

[@guntherultraboltnovacrunch5248]

I took a shot of Jack Daniels everytime he said "airlock" and I'm COMPLETELY WASTED.

[@1LiViNgGOD1970]

K media of any size is not meant to catch dirt 😂😂

[@Wrighty]

If that's the case, why do Evolution Aqua use it in their world famous Nexus filters as a static media, and the new Tempest fines filter. 🤣🤣🤣

[@gOzaruVids]

I want to eat that biggest koi fish.

[@reafsmoker]

ur pond does not have enough flow at all. dirty even with your filter system

[@Ronaldk4getstuff]

hello again here is a link to make it easier m.kzbin.info/www/bejne/oqavqKCDh795mMU Thanks Ronald k4get

[@Wrighty]

Ronald k4get Hi Ronald, Have looked at your video and it's very interesting. have you done a water test on your pond to see how it's running as far as nitrate, nitrite and ammonia are going? Terry.

[@Ronaldk4getstuff]

Wrighty hello Terry Thank you for your reply, yes the wet/dry has cycled nicely. as for the moving bead filter. it's only been operational for 4 days so the cycle begins once more. the gravel filter will be in oppositional today I hope. I am going to seed that as well. I was not able to seed the moving bead filter. I've heard there are bacterial balls to boost your cycle. I will try to find some locally. love your set up. I wish I had more area to work with. have a great day Sir. Ronald k4get