Learn Complete Building Design & Detailing in less than 2Hours | Etabs v19 | IS Code | ACI Code

[@kadentstructuraldesign9929]

Finally! The guide I have been looking for! Screw those 6 years in school, 2 rounds of exams, and 4 years of apprenticeship!

[@Decodebd]

Glad you have liked it.

[@ascanakwenui8427]

You are just the best tutor I have seen on youtube ever. this is just so wonderful. Thank you so much. I have difficulty purchasing your design aid, but Inshala, I will get it.

[@Decodebd]

You are so welcome!

[@nguyetly7487]

Dear sir ! im from VietNam and i follow your channel for a long time, i admiration you and respect you because of your product is very amazing Wish your channel always evolved

[@Decodebd]

Thanks a lot

[@jalilhamediniya7111]

hello mr engineer .I love your channel and i have learnt a lot from you and you are amazing in my point of view.I am from iran and i love engineering in all kind of especially civil eng. God bless you man.

[@Decodebd]

Thanks a lot dear. Ameen.

[@williamsentemtz9652]

Thanks for this lecture, Md. Humayan Kabir. It would be highly helpful if you make a tutorial on a heavily irregular plan where setting the grid line is a cumbersome task. Hope you would not disappoint us!!

[@reshudavane1741]

Best explanation ever seen on KZbin ..thank you sir

[@tandintshewang3464]

Greeting sir, i m fresher on ETABs and your tutorial help me lot and sir further i will be grateful to you if sir could share those excel format for designing beam, column, slab and etc please sir its my humble request.

[@arbazshaikh6771]

Assalamualaikum sir Thank you for your help Keep writing article on your website it's really very helpful 😊👍

[@rubbalamar3297]

finally the proper designs thank you so much sir for sharing your knowledge.

[@LWMiraz]

Thank you very much for all of your hard work and valuable information. This is a great channel to watch.

[@Decodebd]

So nice of you

[@rajat.k.sharma8165]

Amazing Tutorial.. looking forward for similar tutorials on Steel Buildings and PEB structures.

[@kaderamraoui7601]

Thank you very much for all the effort and the valuable information, a very good channel, to watch, why not give us a full training to study, model and analyze a multistory building from A to Z through this wonderful program

[@Decodebd]

There is already one course- kzbin.info/www/bejne/eqanl2uge6d4hc0

[@stephenomoding5941]

thanks alot for the great work bro, be blessed, i have learnt a lot from your channel

[@Decodebd]

My pleasure

[@altamont_2439]

@@Decodebd man i've checked your videos in your channel - you're an absolute beast!!

[@Decodebd]

@@altamont_2439 Thanks for your inspiration.

[@mdfarhajahmed]

Alhamdulillah finally I cleared my doubts

[@jlvnumaprasad4892]

Sir, IIT is very much thankful for the way you teacher the analysis in etabs.I want to know that initially you advertised about the excel sheet and others on payment. Can you intimate that how to get that for me. Thanking you ,

[@Decodebd]

Mail me at [e-mail]

[@adamhiwan1788]

One thing that I can say for you is that, you are my best starting from when I was in Campus even right now I am at government bureau . Sir how can I get this complete excel sheet please ?

[@jaydeepchotaliya260]

please make a tutorial on the interpretation of results of slab stresses and forces in etabs.

[@JoeTengdui-nj6gm]

Great Video. One Question: (Time: 23:39 to 23:56) How did you know you had to change the beam width from 20cm to 25cm after assigning the wall loads?

[@ahmedyahia3171]

thanx for the great information and this perfect presentation.

[@iftakahrulislam9504]

This is one of the most helpful video I have ever seen for etabs designing. May Omnipotent Allah have mercy on you. Brother where are you from?

[@Decodebd]

Thanks a lot. I am from Bangladesh.

[@adamhiwan1788]

Please sir share me the excel

[@mohammedjassim1338]

Very informative but you have designed Everything as per Indian standards

[@persiacrownlibrary4644]

Great, a million thanks.

[@emaadal-janadi4911]

MashaAllah, May Allah reward you for such a great effort....Can you plz share the excel sheets

[@Decodebd]

Check resource Page of the website decode-bd.com

[@emaadal-janadi4911]

@@Decodebd I've been checking but I did not find it...can you plz send it to my email: [e-mail] I'll be so grateful

[@vivekpatel8742]

This is what we actually need to know thanku so much sir

[@Decodebd]

Welcome.

[@basilmohamad5255]

I have purchased the the excel package and iam so thankfull, can you please tell if i can use the loading which it in IS code to design per ACI as they are provided in SI units.

[@engmagdialshahethi3467]

You are a great man, I thank you from the bottom of my heart ترجمه قوقل العفو اذا في غلط

[@fazalarju]

A very good and beneficial tutorial specially the footing part. Thank you very much. But, I could not follow the stiffness modifier for torsion and for serviceability as 0.5

[@bimengineeringcambodia5029]

Thank you for sharing the best tutorial.

[@Decodebd]

You're very welcome!

[@riyazulhaque2675]

Please make a vedio on load pattern define.. Defining about self weight multiplier.. Which we should take 1 and which one we should take as 0..

[@riyazulhaque2675]

If anyone know exactly what to use.. Please cooment..

[@HOWTOEngineering]

I hope u making video about fence design .

[@ashishkumar3279]

THANK YOU VERY MUCH SIR YOU ARE GREAT IT HELP ME LOT

[@prasoongandhi9909]

Excellent sir...thanks a lot. Really helped a lot.

[@Worksmartnothard797]

Hello sir, I watched your videos on Protastructure Modeling also, I have both softwares, Please tell me which one is better btn Protastructure and Etabs?

[@uzmakhan4222]

can you please show how to model a two story bunglaw made of unreinforced masonry walls

[@tanu_thenge]

helpful tutorial sir 👍

[@Decodebd]

Keep watching

[@KUN-KHMER99]

Thank you Sir.

[@Decodebd]

You are most welcome

[@cameronvan6875]

Thank you for your times, effort I am really appreciated however would that be possible to demonstrate the Flat Plate Slab designs with different thickness, fold and irregular columns without beam.

[@adityachavan291]

Thank you so much sir for such a great teaching I'm not able to reach at your site please provide other link so that I can connect with you. I really would like to have that full excel sheet of yours. Thank you

[@arun6346]

Kanu method is used for structural analysis for horizontal loads such as wind or earthquake.

[@shamsulalamdhaka]

You are doing well. Thanks.

[@kennyomega8937]

Thank you so much sir

[@Decodebd]

Welcome.

[@zaherqasem2587]

thanks for the great effort and wonderful job keep going

[@ranjitejashwini5361]

Sir can you please provide this plan link to download,because we are doing final year project on this type of plans. This is very helpful to us.

[@lovelenyfernandez7028]

Thanks you so much sir... Sir i have a question,.. I saw another video about Meshing... In that video he also Mesh the Frames which is Columns and Beams... It is necessary to mesh columns and beams or it is ok Not to.

[@lovelenyfernandez7028]

And another question sir if you dont mind... In Stiffness Modifier in Slabs of 0.25.. It is not necessary to apply stiffness in slab of stairs? Because in your video you didint include it. TIA for the reply sir... Greetings here from philippines

[@azmat_waseem]

Very Informative... Shukran....

[@m.shaihanayub7179]

Great work!! Please also make a video on shear wall design

[@Decodebd]

Shear Wall design tutorial is already available check here- kzbin.info/www/bejne/hqPZZH2rnM9rl8k

[@m.shaihanayub7179]

@@Decodebd Thanks.

[@jalilhamediniya7111]

You are very updated and I want to ask few questions. where are you from?(according to your accent it seems you are may be an Indian or malaysian person) and what did you study in university? Do you have information about Autodesk React Software how we can get that?! I think it was a very good software for structural design. and about csi plant for piping design and supports. thank you so much sir.

[@mohammedeliashossain4947]

He is from Bangladesh

[@Decodebd]

It was trial project of Autodesk. It's sad that they didn't continue with it.

[@RudroChowdhury-v3t]

Hello sir !Very good and beneficial tutorial. if u don't mind, can I get the excel sheet that you showed in your tutorial?

[@riyazulhaque2675]

You are not providing the floor finishing load to the slab and balcony that you have provide later at the time of F3 modeling. Can you please explain why is it so. I am very new to structural design and preparing for the interview.

[@bagusbudi3018]

Need help, I modeled 4 story building w/ concrete frames & slabs. I ran the design/check analysis w/ ACI 318-14 code. At the upmost story, the joint shear check/design & the (6/5) beam/column capacity ratio value is shown as N/A with notes : N/A: Not Applicable N/C: Not Calculated N/N: Not Needed Why the value is shown as N/A? What are those notes mean in particular? and How am I supposed to fix/handle them? I've been a while on the internet but nothing. Is there any specific reference regarding those issues?

[@tenzingyatshodorji291]

Hello sir… how do you add roof truss loads in ETABS… since I’m in Bhutan 🇧🇹, all the houses here have roof trusses with sheets so could you explain how to add those roofing truss and sheet loads on the structure in ETABS?

[@shaheershafat4599]

We don't need csi safe for foundation design as we can do the same in etabs???

[@fazilpatel8723]

just wanted to know if it is ok to have a center of the diaphragm outside the asymmetric building plan after assigning the floor diaphragm in etabs model? How to solve this if this is an issue?

[@irvanandriannur3979]

Hello, i want ask, when i to restrain reaction, why i can't set tabulated for plot type of reactions?

[@azmat_waseem]

Dear Brother, A. @ 1:19:16 Timeline you have changed the support condition from "fixed" to "fixed but" by unchecking translation z, Why is that so? B. Also @ 1:23:57 Timeline you have selected "None(Linear)" under Nonlinear Option for Local 3 Direction for Area Spring Property Data, instead of selecting "Compression Only", Why is that so"?? C. Also shouldn't one need to apply soil pressure/soil over burden on the footing??? Shukran...

[@rayansawant8288]

Very nice tutorial

[@Decodebd]

Many many thanks

[@Sankalp-Art-Work]

What heppend if we dont use 0.7 0.35 etc. For designing beam and columns in. Etabs is it necessary to use these values or we can design with all values as 1 ..pls reply

[@treft3853]

love and respect from pakistan

[@prashantkhanal246]

How to calculate load of structural Glazing with aluminum frame.when we use Structural glazing instead of brick in exterior

[@player30190]

Can you give design steps for individual eccentric footing with foundation beams enclosed in it & combined footing with one column eccentric and other with axial load with beams enclosed????? I think you got my my question right if not then comment below......

[@Abhishekkumar-ct9we]

Thank you sir 🙏

[@Decodebd]

Most welcome

[@rajendraprasadrungta684]

from where to download the excelsheet of column, beam, slab and reinforcement detail? The link which you have shared in description has only stairs.

[@rajendraprasadrungta684]

I am a paid member and still no response.

[@Decodebd]

Dear. This one is exclusive one you have to download it from my website. It's value is more than membership. Other resources you can get from me as member. Drop your mail address below those tutorials to get related resources.

[@heminpatel3616]

Thanks you

[@greenmai-f3d]

How about the wind load and seismic load?

[@sonydawhoirabon4956]

Sir will I get these materials if I join your fan membership? I have been watching your youtube channel for a long time..thank you.

[@22Moody]

can we have a similiar video to this designing a mansory building?

[@javaidkhan8854]

Sir, do u provide offline course...(structural part)

[@marioarif9344]

did torsional constant always same as moment of inertia 2axis and 3axis?

[@olufemijibade2174]

Saying hi from Nigeria. U are so good. I will like to know if I can get these type of Excel files in BS codes.

[@Babatunde94]

Hi, I'm also from Nigeria i just started learning the basic structural designs I was hoping you will like to chat more to exchange ideas and such.

[@asmaanasr9394]

جزاك الله كل خير

[@cengineer8756]

The modelling is better in Midas nGen 2022. They should include the modelling like Midas nGen, it is much easier than Etabs v20

[@jaydeepchotaliya260]

in area spring property wheather we have to select compression only or not???

[@joby6760]

Sir. Do you have Design based on British Standards, similarly as in this video along with the excel sheet?

[@Decodebd]

No, But will try for that.

[@joby6760]

@@Decodebd Sir. Is there a problem if I use this excel sheet for BS standards in attaining values??

[@ahmedhadee6738]

God Bless you

[@naveedalogy1695]

Sir kindly upload stairs design as per ACI provision and codes.

[@engineerakashsaif6893]

Bro plzz make a video on basement wall design

[@brpatelassociates2727]

YOUR VIDEOS AND OTHER EXCEL SHEETS - HOW MANY CHARGE?

[@joby6760]

Can I pay through any other medium? Like through UPI or by bank transfer since I don't have a credit card. Hope you would help me with this to get the resource

[@dilipngangom4198]

Can you please upload one for Steel framed Building design in ETABS?

[@Decodebd]

Will do in sha Allah.

[@arnabdeb1723]

Why cover considered as clear cover in etabs v19? As exmpl: beam 25mm cover now but previously 38mm.

[@vcveasna348]

Very thank

[@engchuluvalentine9744]

I made a purchase for the full excel spreadsheet used in the video via PayPal but haven't received it yet.awaiting your feedback

[@Decodebd]

File Sent by mail. Check.

[@Password20-ro6ut]

Where did u use the aci code???

[@structuralarchitecturalcon6284]

For normal slab should we assign membrane or shell thin?

[@Decodebd]

Shell Thin

[@syedhussain6083]

Query: After the analysis run when I go to the concrete design framing option, the start design/check option is semi-visible for means I cannot click on it. can you help me with that

[@riyazulhaque2675]

unlock the model then go to define and define load combination and then run analysis again and then go to design option.

[@HabiburRahaman-hr4jn]

Why we stiffness modifiers using on Structural member.

[@ishjindal8882]

want to know if we can model two way slabs in etabs with triangular and trapezoidal load distribution to beams

[@richievillarosa1150]

do you have an example for unreinforced masonry walls design in etabs...? thanks

[@srinath296]

Hello sir can you do complete building design tutorial video on ATIR Strap software

[@lovelenyfernandez7028]

Sir i have question... When we print The REPORT DETAIL in Etabs... The footing Detail will be there?

[@felipegutierrez5892]

How many stories it is allow to design?

[@abdulrehmaniftekhar6328]

hello sir, does the rcc building design aid zip file contain all the excel sheets that you have used in this tutorial?

[@Informationpoint14]

Hello sir! Does you have bought this Zip file? If yes then plz can u share me my email: [e-mail]

[@sajidahmedsyed3256]

Sir, please do the same project footing design in safe

[@Decodebd]

Noted with Thanks.

[@ajayanraju]

HI where is resource Tab and its disappeared from the website?

[@Decodebd]

Fixed it. Clear your browser cache & recheck.

[@ajayanraju]

@@Decodebd I DO NOT NEED CAD FILES ONLY I REQUIRES DESIGN EXCEL SHEET OF, SLAB, COLUMN, FOOTINGS AND BEAM.SO INSTEAD OF 29 DOLLAR WHATS IS THE CHARGE WITHOUT CAD FILE?

[@ajayanraju]

@DECODE BD I DO NOT NEED CAD FILES ONLY I REQUIRES DESIGN EXCEL SHEET OF FOLLWOING WHICH ARE COMPLETE BUILDING $ DETAIING, SLAB, COLUMN, FOOTINGS AND BEAM.SO INSTEAD OF 29 DOLLAR WHATS IS THE CHARGE WITHOUT CAD FILE?

[@MR-fu5xb]

Sir why some column getting more reinforcement in upper stories

[@morshedali7523]

جزاك الله خير

[@srkrumel]

Awesome.

[@Decodebd]

Thanks!

[@mohammedjafar9147]

Where can i get all building structural elements design excell sheets of IS CODES?

[@khanmohsin4334]

Masha Allah

[@ssr10001]

Sir, I installed prota structural software but I donot found IS code, which version includes IS code sir

[@Decodebd]

Probably in next releases.