A hat press is my next purchase. I will be coming back to this video for sure!
@moallali44074 жыл бұрын
Did you get it?
@WigentonEssentials Жыл бұрын
Thank you! I recently bought a hat and logo press I can wait to do my first cap using Siser brick.
@lynnettebraye1319 Жыл бұрын
Thank you! This was exactly what I've been looking for.
@angenettaivy89183 жыл бұрын
Thanks. Just got my hat press🙏🏾👍🏾 Detroit here
@jairotorres10565 жыл бұрын
Hi Joe keep the videos rolling. Thanks for taking the time to answer my questions at iss.
@lindastarzenski87704 жыл бұрын
Had my 8 in 1 machine for almost a year now. Haven’t done a hat to scared to. You make it look so easy. Now to find a design. Thank you
@moallali44074 жыл бұрын
Which brand and where to buy it please
@carolchatmon9433 Жыл бұрын
Go for it Linda!
@lindastarzenski8770 Жыл бұрын
@@moallali4407 my husband got it off Amazon. We had to already replace it. Didn’t last long.
@FREEDMFTR2 жыл бұрын
Great video and easy instruction. You helped show me ideas I've struggled finding. My hat press has the pressure springs adapter plate protruding out the edge of the front, (its circular and the heat plate is rectangle) which forces the cap bill back, cranking it, but I think I can move the bottom heat plate out slightly to compensate. Also, I need to find a way to lock my hats down. No attachment on my cap press
@SiserNorthAmerica2 жыл бұрын
Thank you so much for watching! If you plan on doing a lot of hats with HTV for your business, it may be a good idea to look into a reputable cap press that will allow you to properly adjust your pressure, accurate temp, and the ability to change platens. If you need help finding suggestions, please email us at info@siserna.com
@tawanahicks74395 жыл бұрын
Once again you nailed it with the info.
@ronbanks22554 жыл бұрын
How do you stop the hat from creasing when your pressing on a snapback hat
@chadnicholas65942 жыл бұрын
Get a good hat press only way
@osirisjackson54435 жыл бұрын
I never even used my machine yet. Just watching this video I can't wait to do my first cap. Peace and love family...
@abiabi5214 жыл бұрын
Dramatic presentation!! 😁😁🙌💕
@B.YSICKCREATIONs Жыл бұрын
DOPE I JUST STARTED MY CAP LINE N I USE BRICK VINYL AWESOME BRO
@TheGreatest-4Eva2 жыл бұрын
Just bout a 8 and 1 vevor haven't seen a video on how to use all eight instead of tshirts.. thanks for the advice 👍
@riganyanga25265 жыл бұрын
I am just new on the game but this really helpfully information thanks
@SiserNorthAmerica5 жыл бұрын
Absolutely that's what we are here for!
@Blunttingzz3 жыл бұрын
How do we know which vinyl is thick enough to cover seam?
@JGallis3 жыл бұрын
The vinyl that I use on the tshirts can I use that on hats 2 ? Good video by the way
@lesliemoser97154 жыл бұрын
You kill me. That is how some people do it all the above. Me hubby got a hat press combo.
@denisemasters89592 жыл бұрын
Thank you for being a vendor at #sublimationsummit2021
@wednesdaysconsignment13544 жыл бұрын
Joe, I need to start pressing some pretty thick patches to hats. What's the best way to do this with the Siser Cap Press? Pre-heating the bottom platen? Can you do this in a video? Please?
@DerekRC Жыл бұрын
Can you apply Brick 600 you the back of mesh hat? If so what temp settings, time and pressure do you recommend. Thanks for the help
@dmvaceboogieaceboogies3364 жыл бұрын
Very helpful 💯
@xamiworldwide80853 жыл бұрын
Keanu reeves doing vinyl now. Lmao. Jk great video Joe. Helped alot,!
@SiserNorthAmerica3 жыл бұрын
......"whoa". -Keanu
@Blunttingzz3 жыл бұрын
When you say “the way I made it is thick enough to go over the seam” -how did you make it “thick enough”?
@BnB_auto_detailing Жыл бұрын
Seems to really jack up the hat is there a way to do it without getting it all wrinkled And creased ? The first cap looked good but the others got kinda out of shape
@SiserNorthAmerica Жыл бұрын
Sounds like a great opportunity for a recap video!
@sophiek7690 Жыл бұрын
bonsoir quelle est la police d'écriture sur votre casquette ? Merci
@lkemnded_solutions4 жыл бұрын
Awesome!!! I need to find a better heat press for clothing. Where can I find the t shirt heat press machine in your video?
@SiserNorthAmerica4 жыл бұрын
Send us an email at info@siserna.com
@tellyjones84082 жыл бұрын
what is the material he is using on the cap he is wearing
@SiserNorthAmerica2 жыл бұрын
On the cap I am wearing, I used our Brick® 600 HTV
@craftees9153 жыл бұрын
I noticed you are not modifying your lower platen at all. Is this platen different from most "standard" platens in the market? I have had a few cap presses but I've always had to modify my lower platen with foam inserts.
@SiserNorthAmerica3 жыл бұрын
Hello! So, I was using a lower platen that fit perfectly to the hats I used in this video. There are a ton of different dimensions of lower platens. If you get one that fits, you shouldn't have to use foam inserts.
@craftees9153 жыл бұрын
@@SiserNorthAmerica Do you mind sharing which size platen were you using? I am an authorized Siser reseller in Texas but had to close my shop due to the pandemic. You can message me here or email me at craftees915@gmail.com Thanks so much!
@sparky109013 жыл бұрын
How would you press the brick vinyl on a hat? I know you need to press on the back to really activate the adhesive, and I'm wondering how you'd do that on a hat?
@SiserNorthAmerica3 жыл бұрын
For Blick 600 HTV on a hat, you simply have to press for 20 seconds at 320°F and it will adhere.
@jessicayoung79322 жыл бұрын
I have an issue with snapbacks and trucker hats bc of the square front, when I lock it down it never seems to lay completely flat. So when I press it, it wrinkles up. Any tips for that?
@SiserNorthAmerica2 жыл бұрын
You may want to look into getting a platen that fits your hats better. Usually Cap Presses have the ability to change the platens.
@TimberHillRedboneDogs3 жыл бұрын
Have some hats that have a thick. Seam and it wont take the vinyl on the sides of the seam.. Thoughts? any.suggestions ???
@SiserNorthAmerica3 жыл бұрын
You may want to look into getting a lower cap platen that fits better with your hats. You must not be getting even pressure.
@cgilbert63183 жыл бұрын
What size Siser Platten did you use? I have 3 different sizes and when I lock down the hat - there is still a lot of play in the middle of the curve... The platen doesn't have the same curve as a trucker hat shape...I get wrinkles and creases in my designs - thanks
@SiserNorthAmerica3 жыл бұрын
There are about 6 different platen sizes... you can always use a foam (such as a piece of mouse pad or yoga mat) to cushion or as filler in the middle of the hat.
@LanceMcGrew2 ай бұрын
Why doesn't your Easy Puff work on caps? It sticks but does not puff.
@SiserNorthAmericaАй бұрын
Sometimes it may require a second press
@carmelocampo63322 жыл бұрын
How can you do this without a hat heat press? I have a medium size Cricut easy press 2 and a Mini heat press
@SiserNorthAmerica2 жыл бұрын
you can use the mini easypress, but you still need to make sure you are applying good press over the cap.
@PongDalisay4 жыл бұрын
If it is cotton then you can use dark transfer paper right?
@SiserNorthAmerica4 жыл бұрын
Transfer paper is a different process than heat transfer vinyl.
@denisestewart29575 жыл бұрын
When should you change the cap press platen, on what type of hat and size and how would I know to switch it? By the way very nice video so now I can take mines out the box, which I had for 2 months and scared to use it smh
@SiserNorthAmerica5 жыл бұрын
You will know when to switch platens, because the face (front panel) of the hat may vary in size. This is dependent on the type of cap, the manufacturer, etc. That would be when you switch, and switch them back is very easy. The platen just falls into the grove of the Cap Press.
@denisestewart29575 жыл бұрын
@@SiserNorthAmerica Thank you
@jayrab43785 жыл бұрын
What kind of sisser did you use?
@paulduddy44453 жыл бұрын
How we doing?...... Where can i source the caps used in your video? I'm in Scotland and looking for a quality distributor for my own wee design and print business. Any help would be greatly appreciated... Cheers!!!
@paulduddy44453 жыл бұрын
Sanmar yes, but are they just U.S based?
@tedz2000 Жыл бұрын
Leave links to press and materials next time thanks
@SiserNorthAmerica Жыл бұрын
please reach out to us at info@siserna.com and we can help you out
@raylinares45114 жыл бұрын
I have that same press but have a problem it keeps pinching the middle of the cap in word leaving a real ugly cress no matter how far I set pressure any suggestions
@SiserNorthAmerica4 жыл бұрын
yes! I would suggest getting another size platen to better fit your caps. This will make a big difference. Sounds like the platen you currently have may be too big for your hats.
@raylinares45113 жыл бұрын
@@SiserNorthAmerica have the same press and have the platen that came with press what platen you recommend for the classic yupoong caps 5 panel
@lalalandvintage2 жыл бұрын
What kind of printer do you need to print on that stuff?
@SiserNorthAmerica2 жыл бұрын
You just need a vinyl cutter and some Siser HTV!
@SiserNorthAmerica2 жыл бұрын
email us at info@siserna.com
@justmoney39473 жыл бұрын
What size platen do i need for a 6 panel hat
@SiserNorthAmerica3 жыл бұрын
You can probably get away with a "Standard" size cap platen ... or the "Rookie" size
@hanzelsanchez48903 жыл бұрын
from where did you get those caps?
@SiserNorthAmerica3 жыл бұрын
SanMar!
@noordeen23185 жыл бұрын
*Hi I love Siser vinyls Hard to* *come by. Are there any* *authorised siser distributtor for* *the UK or Europe*
@SiserNorthAmerica5 жыл бұрын
Hi! If you email info@siserna.com we would be happy to connect you with a distributor in those areas.
@noordeen23185 жыл бұрын
@@SiserNorthAmerica. appreciated
@SiserNorthAmerica5 жыл бұрын
@@noordeen2318 that's what we're here for! :)
@noordeen23185 жыл бұрын
@@SiserNorthAmerica perfect! One more thing I see some of your vinyls on what loks like denim. Is that possible, if so which vinyls. Thanks again
@SiserNorthAmerica5 жыл бұрын
@@noordeen2318 Absolutely! All of our vinyl can be applied to denim!
@raylinares45115 жыл бұрын
I just got the same press and using the same hats but what ever press I use I keep getting this ugly cress down the middle of the cap
@SiserNorthAmerica5 жыл бұрын
Hi Ray! it sounds like the platen you are using is to big for your hats. Please contact our Tech Support at 586-203-8171 and we will try and help you out!
@onestar454 жыл бұрын
my cap does not fit flush on the platen despite trying to move it around!!!!!
@SiserNorthAmerica4 жыл бұрын
You may want to look into other size platens! Each hat has a slightly different dimension.
@sweetstickwillie66653 жыл бұрын
Or if u can invest in the stahls 360 iq ...u dont have to change platens @ all
@guitaraddictsanonymous815 жыл бұрын
So are these hats cotton? I found out that hats that are polyester blend the siser HTV doesn't stick.
@aprilmost3 жыл бұрын
What htv works best on hats
@SiserNorthAmerica3 жыл бұрын
Any of our HTV will work best on hats!
@saltodecaderas4 жыл бұрын
Striflock is a cold peel???
@SiserNorthAmerica4 жыл бұрын
The original StripFlock was a cold peel.... StripFlock Pro is a warm peel.
@ricogonzales29895 жыл бұрын
What material are the hats? Does that matter? Thanks
@SiserNorthAmerica5 жыл бұрын
These hats are cotton, but our material will stick to most all hats including polyester.
@hollygeorge40523 жыл бұрын
Do you do orders
@SiserNorthAmerica3 жыл бұрын
We do not fulfill order directly. If you are looking for anything in this video, please feel free to reach out to us at info@siserna.com
@ressiefry18554 жыл бұрын
What size platen are you using to demo?
@SiserNorthAmerica4 жыл бұрын
We used the standard size platen- 3.5" x 6"
@ninadkesarkar66953 жыл бұрын
What are the temperature you use?
@SiserNorthAmerica3 жыл бұрын
I followed all the recommended temperatures for the corresponding Siser heat transfer vinyl :) You can find all our temp recommendations for each product on our website www.siserna.com
@jeremiahpalma5 жыл бұрын
Hi, may I ask. How long do you think the vinyl last on the cap?
@SiserNorthAmerica5 жыл бұрын
Hello! As long as it is heat applied to the cap correctly, it will last the lifetime of the cap.
@jeremiahpalma5 жыл бұрын
@@SiserNorthAmerica thanks for the response sir. Very appreciated.👌
@PromezQueen3 жыл бұрын
What size do you do your designs
@SiserNorthAmerica3 жыл бұрын
That will all be dependent on the hat sizes and your placement.
@PromezQueen3 жыл бұрын
@@SiserNorthAmerica lol ok
@neilalston73774 жыл бұрын
Need to address the marks and seams the press is putting in the hats. No customer would accept that.
@brandonrenteria1314 жыл бұрын
how do you avoid scorch marks?
@SiserNorthAmerica4 жыл бұрын
With any Polyester fabric, fully avoiding scorch marks can be very challenging. Unfortunately, there isn't a perfect formula for that. Make sure you have a cap platen that fits your hat correctly, that is very important. Make sure your pressure is set correctly. With most of our HTV, you have a margin of temperatures you can apply at. With The EasyWeed Family, you can drop the temp down to about 285 and press for about 15-20 seconds. This may help quell the scorching.
@naturalhealthrevolution15185 жыл бұрын
What brand of hats are those? Where you get them from
@BoatFails4 жыл бұрын
Where is the best place to buy hats wholesale?
@SiserNorthAmerica4 жыл бұрын
If you have a business ID, SanMar is a great company to go to for wholesale blanks!
@beezydawstv796410 ай бұрын
I press a baseball cap 🧢 my vinyl didn’t stick
@pilarharrison29945 жыл бұрын
So you know how sometimes when using a cap press you get that weird “ledge” at the top of where the platens meet (top edge from pressing)? Any suggestions to help reduce the press marks on hats?
@SiserNorthAmerica5 жыл бұрын
You can try decreasing the pressure a bit... or make sure the inside seam of the hat is not on the platen. Unfold it, and that will help alleviate any ledge mark above the brim of the hat.
@pilarharrison29945 жыл бұрын
Cool thanks-I’ll give both suggestions a shot.
@diriangen58115 жыл бұрын
Hi, bro could you tell me What kind of press do you use and where to buy it? Thanks Diriangen58
@SiserNorthAmerica5 жыл бұрын
That is the Siser Digital Cap Press or more commonly referred to as the "Red Cap Press". You should be able to get one from an Authorized Siser Distributor. If you don't currently order from a distributor, send your zip code to info@siserna.com and tell them what your'e looking for and they will point you to the nearest distributor.
@one-mancrew76305 жыл бұрын
Heat Press Nation sells them
@cmarkme4 жыл бұрын
The Shopping Channel Tutorial on how to NOT Press a Cap, Nearly made me Lose my RoYaL CoMpOsUrE.. I'm from the UK so I'm Royal and Eat Crumpets
@valaness4 жыл бұрын
Horrible hats. That press makes so many crises lol