Same problem, all of sudden. Used this flash for the past two years with no issues until recently...
@tafadzwamatope53182 жыл бұрын
Managed to get my Godox V1 fixed. The flashbulb had blown out! just got it replaced its working perfectly fine now
@Flwrjungkookie2 жыл бұрын
What the replacement price
@tafadzwamatope53182 жыл бұрын
@@Flwrjungkookie I paid AUD$90 for the replacement
@Puzzifoto2 жыл бұрын
qual é a melhor maneira de entrar em contato com godox? você teve que carregar seu v1 para godox?
@sarpedonzeus18742 жыл бұрын
Good to know but seriously poor quality on Godox part.
@JahgamboMedia Жыл бұрын
where did you have it repaired at???
@angeldelaosa63102 жыл бұрын
Hi everyone, I think there are 2 possibles causes. V1 has no fan and neither a thermomether that can advice you that is overheated, so in this case I guess it stops auto until reach a better temp. The other reason is the flash tube that is exhausted and got to be replaced. I've the same problem using it as master flash. I hope this helps.
@mathu_stans2 жыл бұрын
There are times it suddenly stops working in the middle of a shoot. And i can't figure out why. The all it does is make the beep sound when you attempt to make it fire
@sarpedonzeus18742 жыл бұрын
Same problem .. fails to fire at all. Seriously annoying is it's only been used for one event.
@Gaganpreetsinghgrewal Жыл бұрын
This is a crap flash seriously. I bought it almost a year ago and replaced hot shoe 3 times and same thing happening right now , just beeping but no flash And one more thing I don’t know what happened currently I can’t even turn it on /off because the power switch is stuck . Anybody having issue with the power switch of V1S as well ?
@fernandovera11952 жыл бұрын
I have two weeks since I acquired the v1 version 6 and mounted on the camera suddenly it does not shoot, it is a nuisance because you can lose a great photograph. although it indicates the green light that I already recycle, it does not respond, sometimes making me lose up to 6 shots
@joeldiramon85382 жыл бұрын
is this a common problem? I have a little over 250K shots with it and it died. I get a flash maybe once every 7 shots.
@alinus4techno2 жыл бұрын
I have the same problems with mine.Has been bought for only few days..mine took almost 25 minutes to work again.it happened 3 times at 1 event.
@mathu_stans2 жыл бұрын
Today i missed a great shot of my son, we all know how difficult it is to pause kids for photos, then when you finally get a chance for a great shot the flash didn't fire. I wonder if it was a client i was shooting. I would end up looking stupid for the next 20 minutes it took to start firing again
@joeldiramon85382 жыл бұрын
@@mathu_stans exactly! Luckily for me my client/model is my partner so she has patience but still this shouldn’t happen. Sucks because when it works it’s such a good flash
@tafadzwamatope53182 жыл бұрын
Hi Aaron, I'm having the same issue with my Godox v1 speedlight. everything was working two days ago then it started misfiring , I turned it on today and it fired a few times then it stopped.
@arifehcamanto12092 жыл бұрын
How to fix it?
@nirvaanmedianepal2 жыл бұрын
When it will be fixed....I am facing the same problem now...
@tanziladeel36822 жыл бұрын
Thanks for information
@donaldvosburgh83372 жыл бұрын
Check out Robert Hall’s video on reasons why Godox equipment can misfire.
@parthapratimbordoloichutia24732 жыл бұрын
How to change rx mode to slace mode
@HamidKhair Жыл бұрын
godox he changed the name of slave by rx
@bean11239662 жыл бұрын
Having the same issue here. Any other solutions?
@brunohenriquecury1742 жыл бұрын
Hi! I'm having the same problem, has anyone found a solution? Thanks in advance
@zohaibhabi2 жыл бұрын
Hi Aaron. I got a similar issue, gives the beep and doesn't fire. I saw another person post a video but unfortunately turned off the comments so no one can write a comment. If you got a solution kindly message here. Thanks
@TheAtvince2 жыл бұрын
Hi there! Godox made an exception and exchanged my V1 for a new one. The new one has been working great for me ever since!
@AlexanderImedashvili2 жыл бұрын
I have same problem now (((((((
@romarockart Жыл бұрын
i have the same problem
@keboin2 жыл бұрын
I made it work! :D all you have to do is put both transmitter and receive into one channel. I'm using X2t transmitter though
@mathu_stans2 жыл бұрын
There are times in suddenly stops working in the middle of a shoot. And i can't figure out why. It it does is make the beep sound when you attempt to make it fire
@vanqiordanova33372 жыл бұрын
how to make from rx to slave ?ps
@HamidKhair Жыл бұрын
godox he changed the name of slave by rx
@MiguelVermeulen2 жыл бұрын
So I have two of these....an both have this problem after a few events...I'll send them in to repair. But this says to me: do not trust these devices for professional work! Pity, cause I really love the results and power of these flashes! But sadly enough: can't trust these V1's...bummer!
@romarockart Жыл бұрын
So many people having same problem i guess this is so common problem and godox/flashpoint doesnt do anything to solve this somehow
@ikerlanz2 жыл бұрын
Tengo el mismo problema. A veces el flash dispara, pero otras no. Es completamente impredecible. Alguien tiene la solución?
@gilgomes37612 жыл бұрын
Mismo problema 😣😣😣
@djuancapro2 жыл бұрын
@@gilgomes3761 mismo problema . ptm y para el costo no deberia tener estos problemas