DELAY/REVERB FX Looping - Audio Interface Unlocked !!! (So it doesn't sound like A$$!!!)

[@PatPosse]

THANK YOU for Making this Channel POSSIBLE. YOU GUYS RULE ! ⬇⬇ Become a PATREON and help the channel GROW HERE ⬇⬇ ➡ www.patreon.com/patposse ⬇⬇ Become a part of the team and help the channel out by becoming a MEMBER here ⬇⬇ ➡ kzbin.infojoin Don't want a membership but still want to donate? my PayPal ⬇⬇ ➡ [e-mail] Get 7% OFF Your first Year's DistroKid Membership HERE ⬇⬇ ➡ distrokid.com/vip/patposse

[@Stefkicksass]

Thanks! I finally get it now! 😄

[@PatPosse]

Sweet!!! Happy to help 😁🤘🏻

[@McNasty_619]

Finally found the info that i was looking for! You're amazing, thank you!

[@PatPosse]

Awesome!! Happy to help 😁🤘🏻🤘🏻

[@nomadharpist]

Thanks for the video. Won’t you need a reamper in between the interface and the effect pedal in order to raise the impedance of the line out of the interface to a high instrument impedance that the effect pedal is designed to receive?

[@PatPosse]

You could use one and it would work fine but I haven’t found the need to use mine…

[@listener84]

Great video Pat!

[@PatPosse]

THANK YOU!!!

[@ThePhoenixcompanies]

Good information. Thanks. I am using Reaper, but it's pretty much the same.

[@PatPosse]

Glad to help! Yeah, it’s all basically the same. Just need to be routed out and you are good to go! 🤘🏻 Thanks for watching and commenting 💪🏻

[@alpuhagame]

This actually gives you so much convenience over recording things, you can record your DI and then use any pedals you like afterwards. For my case, I wanted to know if it's possible to route signal from DAW to Digitech Whammy and then back to the amp-sim. The problem with VST pitch shifters is they are resource-heavy or introduce artifacts, while real pedal is able to pitch-shift properly without latency.

[@PatPosse]

You definitely can! I do it with Whammy's and Wah's all the time! It's always a good idea to keep a DI take clean and then "reamp" to pedals.. It's also great to try out different Wah pedals to see which one fits better on the mix or which one just simply feels better...

[@marcelhenrici9113]

Great info as usual. Always informing and teaching us.🤘🤘🤘

[@PatPosse]

I appreciate that! That is the idea…! But also, a lot of people asked for it but now they are not watching it lol. Maybe the thumbnail is not attractive enough 😅

[@marcelhenrici9113]

@@PatPosse may have something to do with Memorial Day

[@PatPosse]

@@marcelhenrici9113 I hope! lol

[@zoranpavlovic9540]

Always awesome and clear content without a load of talk shitteing 👌🤘 Is same principle for processor/amp modeller as Line 6 pod floor with tube screamer and analog delay as additional stuff (TS gives awesome flavour) ? Cheers bro and rock on! 🍻🤘

[@PatPosse]

Thank you so much!! Sure, same principle!

[@__aythami]

Correct me if im wrong but i though pedals needs instrument level to function as intended and the interface outputs at line level. How do you match them?

[@PatPosse]

@@__aythami In theory, yes. But in practice, it makes little to no difference

[@Hav0cZ]

Gg dude that actually unlocked my brain to understand how a loop works hah sucks being a noob sometimes.

[@PatPosse]

Hahaha!!! That’s how we ALL started!! Sometimes we just need someone to show us the way! 😁😁

[@sy.4289]

Hey Pat, do you know if I can do what you showed in this video but with Scarlett Solo 3rd Generation audio interface? I'm struggling to confirm this despite having researched for an hour plus now.

[@PatPosse]

You can’t. You’ll need at least 2 inputs to do this. 😢

[@PatPosse]

You might be able to get away with using a 1/4” to XLR converter and using both inputs, not 100% on it cause I don’t know if you can use both inputs at the same time… but if so, that might be your best bet as a work around 😉💪🏻🤘🏻🤘🏻

[@sy.4289]

​@@PatPosse Hey Pat: Am I correct to understand signal chain being: guitar -> pedal(s) -> instrument level input of interface (amp simulator plug-in running inside interface) -> instrument level output of interface -> input of pedal(s) -> output of the pedal(s) -> another instrument level input of interface? Reason for asking: I'm looking at Scarlett 4i4 now and it only has line outputs (4 of them in total), and to my understanding, I can't really connect such output to a pedal for certain pedals might clip unless I get a device to attenuate the signal level going into the pedals?

[@PatPosse]

What you wrote is correct and it would do exactly what I’ve done on both videos. You should be able to fix that by adjusting your output levels 😉

[@sy.4289]

@@PatPosse did you not have to use reamp box?

[@ddebayan1990]

I have Nux mg 30 multi effects pedal and a Focusrite Scarlett Solo audio interface, I used headphones as a sound output.. pls guide me best possible settings on Reaper Daw… when I run my headphones out of Nux mg 30 the sounds are so good but when I do same from the focusrite solo it sounds very poor with latency and digital trash.. Please help

[@PatPosse]

Hi there, that's because your headphone output is probably amplified whereas your actual outputs are line level (meant to be amplified by an amplifier), I am NOT familiar with reaper, I tried it once when I was first getting started on my recording and producing journey but I hated it... I wish I could help you further and better than this...

[@wce74wce15]

How do you overdub wet & dry using a real looper pedal with audio interface, not a real amp & cab? ie: nueral dsp plugins ect

[@PatPosse]

I'd have to see what hookups it has but it sounds to me like you would have to output from the stereo outs to two different inputs and then balance the tracks accordingly on your DAW

[@wce74wce15]

@@PatPosse MXR Clone looper, with Audient Evo 8

[@PatPosse]

@@wce74wce15 I've researched the pedal and it doesn't seem like it's capable of doing what you want to do with it.. Sorry...

[@wce74wce15]

@@PatPosse ok thanks anyway

[@PatPosse]

@@wce74wce15 you are welcome

[@laufeysullivan6594]

Does anyone know if this can be done with the Focusrite Scarlett 2i2?

[@PatPosse]

You can, you’ll have to sacrifice one of your monitor outputs but you can use the headphones in the meantime…

[@laufeysullivan6594]

@@PatPosse Awesome. Thank you for the prompt and erudite response.

[@PatPosse]

@@laufeysullivan6594 Happy to help! Hope you can git'er done!

[@asappacsun9153]

Can this be done in fl studio?

[@PatPosse]

Sure. Same principle.

[@zoranpavlovic9540]

Crazy thing with FL is bcs most of ppl consider it crp. I've used FL many years ago and I can't swear but one of the best tones I've dialed was....FL 😳

[@PatPosse]

@@zoranpavlovic9540 yeah, I am NOT a fan at all. But if it works for you then go for it!!

[@zoranpavlovic9540]

@@PatPosse neither do I. Idk about mixing but not so bad for recording. E. G., I even feel difference between Reaper and Cubase but Steinberg CS1 seems is worst audio interface ever and I am still lazy to change it for something else such ad as focusrite. I remember I used FL without interface and it worked well, would like to try it again. Cheers master! 🍻🤘 Great Channel, learned a lot of useful tips from you.