Great tip on adjusting cables to the middle and setting initial throttle position at the carb end!
@atotalmoron4 жыл бұрын
Per your advice, I just finished replacing my FZ09's throttle cables that had 62k miles of wear on them. The throttle is remarkably smooth with a crisp return snap that I didn't even realize was missing! ~120k miles of street riding experience and until I saw this, I never even thought to replace throttle cables since they always "just worked fine". I am pleased. Thank you for sharing your wisdom with the world.
@Moonfleet414 жыл бұрын
Most welcome Sir, glad it helped you... enjoy your bike!
@cpuuk5 жыл бұрын
It's not sticking throttle, it's a basic cruise control ;-)
@hdhardcore85115 жыл бұрын
Cruise control! HAAHAHAHAH
@clarkeboss10724 жыл бұрын
Until you end up in a hospital or graveyard smh
@clausfkvist3 жыл бұрын
Just bought a busa my second gen 1 2000 model with 120000 km on the clock. Do all maintane myself thanks to Dell i got a KZbin service manual 👍👍🙂
@Moonfleet413 жыл бұрын
Nice one Claus, have fun with the bike and enjoy the videos..
@david555montez95 жыл бұрын
👏👏👏👏👏😀😀😀😀😀👍👍👍👍 I could not express this chapter better my friend!!!!!!!
@R3RLEE5 жыл бұрын
Good advice on the adjusters never really sure where they should be, so again thanks. Good vid as always!
@tonyjeffery35 жыл бұрын
Friday night, cut the grass then sat in the garden with a beer and this video,,, perfect evening. Also really happy to see you on form and enjoying yourself Del, give my love to Penny. Take care.
@Moonfleet415 жыл бұрын
Hey Tony, how wonderful to hear from you Sir... glad you're having a great Friday, sounds like the perfect way to spend it, and the weather looks good for the weekend... thank you for your faith, and support, my friend, always good to hear from you, D&Px
@bikinglife15475 жыл бұрын
I am really loving this build Del.... I'm sat in lanzarote watching this. Keep up the great work D&P
@Moonfleet415 жыл бұрын
Not jealous at all mate lol... thanks for watching!
@Kay8B5 жыл бұрын
26:01 When the simplest task makes you feel like a BOSS! HAHAHA loved it.
@davidbeaver392 жыл бұрын
Nice job. It is amazing wether in the UK, or USA all bike guys are the same. There's this passion for the perfect job to be done everytime you wrench on a bike. You clearly have the passion. Great video.
@Moonfleet412 жыл бұрын
Thanks mate👍
@danandyong66533 жыл бұрын
Thank you, just what I needed!
@cyberjack5 жыл бұрын
Be nice to see her take shape .. love the steampunk look so am sure you'll go nuts and make it amazing
@JamesMcCreadie715 жыл бұрын
Thanks for the info on the oil cooler fittings and showing how to shorten them, I hadn't realised how easy it was to do.
@Moonfleet415 жыл бұрын
Sure thing mate, it's really basic technology, you just gotta be a bit careful with the threads, as being aluminium and quite fine, they're quite easy to cross thread, or strip...!
@JamesMcCreadie715 жыл бұрын
@@Moonfleet41 thanks
@garethburningham94675 жыл бұрын
I've realy enjoyed watching the "faffing about" videos and look forward to the fabrication vids... Cheers del.. 👍
@jwhbos3 жыл бұрын
Very helpful tips on the cables. Thank you very much!
@johnmiddleton7263 жыл бұрын
Thanks for this video. Very informative. I don’t have the mechanical aptitude of my 2 younger brothers but your video has given me the confidence to do this job on my 03 Yamaha XVS 1100. Thanks
@Moonfleet413 жыл бұрын
Most welcome John. Glad it was helpful!
@johnmiddleton7263 жыл бұрын
I do appreciate you getting back. I have an issue with the throttle body being stuck. After I swap out the cables, is there a way to externally lubricate the throttle body? I just don’t feel competent to go beyond that. Thanks
@8ball9035 жыл бұрын
1/4 action throttle my man. All that lovely power nice and easy. Best upgrade to any bike
@bubbles18635 жыл бұрын
Another vid that I learned something from thanks del
@ollieb98755 жыл бұрын
Lots done today! Most enjoyable. Thanks buddy.
@101RED15 жыл бұрын
Thanks Del that was fun. Just a word about the ENGLISH wheel, watch your thumbs! Wear gloves. You'll know why after the first half hour! We all get excited over new tools in the workshop.
@Moonfleet415 жыл бұрын
Thanks for great advice mate, looking forward to it!
@springy-21125 жыл бұрын
Always a pleasure to see your progress and excited for the English wheel "Something I've seen but not done" and what a glorious feeling when you put new cables and slider on ....ooh lush !! Peas and loaf brother ! 👍🏻☮❤
@Moonfleet415 жыл бұрын
Lush indeed brother, like pulling on a new pair of socks!... never touched an English wheel in life so far, so it's a whole new journey, apparently I have thumb trapping to look forward to... !! So watch out for the Reg Prescott moments... have a good weekend mate, chat soon, D&Pxx
@davebalaam5 жыл бұрын
Seeing this video has made me realise that the somewhat slow-to-return throttle on my ZRX 1200 might be in need of some new cables! Thanks Delboy! Another great video!!!
@Moonfleet415 жыл бұрын
Sure thing buddy, you'd be shocked at the transformation !
@g40will5 жыл бұрын
Well done Delboy! I’ve really enjoyed all the videos so far and I’m looking forward to the fabrication side to see how she takes shape.
@tttrevin5 жыл бұрын
Great video. The old heifer is coming along beautifully.
@Gus-cg9yp5 жыл бұрын
Hi Dell, nice job !! Looking forwards to see the fabrication, thanks for the video, have a nice sunday. Gus
@Moonfleet415 жыл бұрын
Hi Gus, Great to hear from you sir... hope you've had a good weekend..
@bccapone837 Жыл бұрын
Always bringing top quality work 👍🏼👌🏼
@brendancheyne33152 жыл бұрын
As I now have come to expect from you Dell another very informative session packed full of pro tips and tricks. Thank you buy the way for helping to make me a better do it yourself motor bike mechanic.
@Moonfleet412 жыл бұрын
You're most welcome, glad you enjoyed it!
@dimitaratanasov37225 жыл бұрын
Del,you are very cool guy! Your posts are very inspirational!
@fireatwill81435 ай бұрын
Great demonstration of throttle cable replacement 👍
@Moonfleet415 ай бұрын
Glad it was helpful!
@beans44915 жыл бұрын
Wow things are shaping up well, fantastic video. Many thanks.
@Liam_Bollocks5 жыл бұрын
I’m a Honda main dealer mechanic, and despite the service manual saying to adjust the free play on cables, clutch and throttle, unless they’re excessive either way, I don’t touch them, because as you said, people normally have them set up to how they like it 👍
@Moonfleet415 жыл бұрын
Dead right mate, glad to hear it, can you have a word with some of the Harley Techs, who seem to think 1/4" of freeplay in the twist grip is correct lol !
@Liam_Bollocks5 жыл бұрын
Moonfleet41 i try my best not to work on Harley’s anymore 😂
@suzuki750stu5 жыл бұрын
Ooooooooo tooooools, I’m looking forward to it as much as you buddy, loved the long video, great work on the bike, hope you and Pen are both well, regards Stu 🤘🤘
@Moonfleet415 жыл бұрын
Sure ting Stu, great to hear from you mate... thge last few have been a little shorter as they're stand alone videos for single jobs... but this was a round up and clear the decks to make way for the fun to come... got some awesome stuff to share with y'all in the next one... can;t wait.. Have a great weekend mate.. Del.
@atifrashid14215 жыл бұрын
Lot to learn from you .
@bikerdad14795 жыл бұрын
Oooohhhhhh the smell of burning rubber in the morning mmmmmmm!!! Just rebuilt my master brake cylinder today and can't belive how easy it was,thanks for that vid Del and did Penny know you had her hair dryer??
@garyriddell48255 жыл бұрын
cant wait to see you on the body work
@trig5 жыл бұрын
Cant wait to see your first English Wheel Thumb:}}}} Dont worry it doesn't hurt.
@Moonfleet415 жыл бұрын
Thanks buddy... like my buddy Dave Dyson says about having cold hands on your bike, if you take one of your boots off, then your hands don't hurt anymore, so if I trap a thumb, I guess it's drop a hammer on my foot and I'll be fine lol Can't wait myself mate, unboxing in the next video!
@andydawson20705 жыл бұрын
Exciting times ahead, really looking forward to the next video, brass bodywork, wow that's awesome.
@Moonfleet415 жыл бұрын
Cheers Andy, it's just a pipe dream and a crazy plan, I've never seen it done before, am sure there are limitations, in which case, I'll find them, along with my own as I develop the skills... been watching videos and reading books on this all my life, so it's about time I got stuck in !
@DaveHines15 ай бұрын
Several years late to the party , But I reckon those 30 videos so far are a pretty good apprenticeship 😃 Many thanks 🍻
@stevenlongtin60755 жыл бұрын
Thats alot of work bro
@massoudzadeh33943 жыл бұрын
Great explanation, Thanks for sharing
@Tzok0085 жыл бұрын
You made a habit for me, to wait for your "next video". I respect your work and how you think before you act (your approach on fixing /diagnose )
@Moonfleet415 жыл бұрын
Thank you Vlad, they say that "poverty is the mother of invention", well on a less dramatic level.. taking time to think things through and research a little can save you a lot of money in the long run don't you think..:-))
@Tzok0085 жыл бұрын
@@Moonfleet41 "research a little can save you a lot of money in the long run don't you think" I lean that the hard way a long time ago, basically don`t reuse things that seem unimportant (research if is or not, never go on premise "seem" ) Young kids have a lot to learn from you from your videos. and patience is a VIRTUE
@dekgp75 жыл бұрын
Can't wait to see the next stage, nice one.
@racinsnake71292 жыл бұрын
Hi Del. I was looking for a throttle cable install guide/vid (for my zx9 B3) there you were near the top. Always look at your stuff if it’s relevant, as you cover even simple jobs from top to bottom in a non patronising way. The syringe trick on my front brakes, man I wish I’d seen that a day earlier! You give confidence to try DIY stuff I might not otherwise have. Top man.
@Moonfleet412 жыл бұрын
Most welcome mate, Glad I could help, and really appreciate your kind feedbackl..
@benlow55645 жыл бұрын
Can't wait I'm just as excited as you are
@tonymartin37805 жыл бұрын
Great video Del. Loads of useful information look forward to seeing the fabrication. Have a great weekend
@Moonfleet415 жыл бұрын
Hey Tony...Thnaks buddy, exciting times embarking on new skills and new procedures.. but hey, nothing ventured and all that.. Have a good weekend mate and chat soon.. D&Pxx
@paulharast19585 жыл бұрын
Hello Del. Awesome video as always and I enjoy seeing your work you are a masterpiece. Penny and you Del Ride Safely and Have A Wonderful Weekend. God Bless
@Moonfleet415 жыл бұрын
Thank you so much Paul, its always good to hear from you, and an honour to have your kind faith and respect.. have a good weekend yourself and ride safe.. D&Pxx
@kevinquick21015 жыл бұрын
You always have the best music. I might actually know these guys. The info at the link you provided says they are from Hickory, NC, but I can't find any member info or pictures. The last time I was in a band was in Hickory about 12-15yrs ago. I live about an hour and a half further south now. Glad you are sharing stuff we would otherwise never get to hear.
@Moonfleet415 жыл бұрын
Hi Kevin, exactly right, they are from Hickory, the band has been through some difficult challenges over the years, and a few personal problems as well, but they're still hanging in there, and a great bunch of guys... !
@chrispayne10295 жыл бұрын
Great Video Del keep up the great work 👏👏👌🏻👍
@MrJosevintem2 жыл бұрын
Wow, stuck gas cable? nice, free cruise control
@benlow55645 жыл бұрын
What's up delboy and penny.saturday morning in NZ Rotorua great way to start the weekend off awesome video as usual love the vision and attitude towards this project handy tips for my own task, everything I've done on my bike your videos have been my Go to, keep up the awesome work ride safe 🏍️😋
@benlow55645 жыл бұрын
@@munter10 Chur bro just seen your comment Kia-Ora from home take care
@Moonfleet415 жыл бұрын
Hey Ben, thanks for the awesome support mate, it's wonderful to have friends the other side of the world, and what a beautiful country you live in, we recently watched Danny (Million Dollar Bogan) series on his tour of NZ, and oh my goodness, such breathaking scenery, you're so lucky to live in a beautiful place like that... have a great weekend, ride safe D&Px
@loddude57065 жыл бұрын
'OK, now I've made sure it's safe, let's make it 'really dangerous' again . . .' Van Delsing (#'Fangs for the mammary'# : )
@peterbonehill13495 жыл бұрын
Hi Del. Viewer number 11. Comment number 1. Sad I know...but don't it feel good. Top video as usual. You really should have a tv show. This is proper reality lol.
@Moonfleet415 жыл бұрын
Thank you so much Peter, thats very kind of you... and what a dream come true that would be.. Congrats on the '1st' post this time..lol!
@Moonfleet415 жыл бұрын
@@munter10 Very kind words mate, much appreciated by us both, have a great weekend!
@stevebell60945 жыл бұрын
Bang tidy by the master craftsman!
@BryanHemedinger4 жыл бұрын
Awesome Love your work Man
@busaboyzmccsa97395 жыл бұрын
Hey boeta, now for the the awesome work to follow, cant wait to see the start of the next part be manufactured. you just have the skill boet
@Moonfleet415 жыл бұрын
Thank you my broer, so looking forward to embarking on new skills, and new equipment, that I've never handled before... it's gonna be a journey! Ride safe, Del
@busaboyzmccsa97395 жыл бұрын
@@Moonfleet41 Boeta, and I'll be watching on the otherside of the red sand. cant wait to see
@manoffunk5 жыл бұрын
Great edition sir! What a journey to get this far. English wheel, that'll be amazing! Just keep your fingers out the rollers! ;-)
@Moonfleet415 жыл бұрын
Thank you David, in all the videos I've watched and all the books I've read over the years, that is apparently the least fun part lol
@allenhuling5985 жыл бұрын
I always enjoy (and learn from) your 'faffing about' videos! Lookin forward to that English Wheel.....ride safe you two!
@Moonfleet415 жыл бұрын
Thanks Allen, hope you're keeping well there!
@dutchy3155 жыл бұрын
Never heard of steam punk I must admit so, really looking forward to seeing this take shape. Good luck with the build Del!
@Moonfleet415 жыл бұрын
It's an awesome style, not necessarily to do with bikes, just a fabulous take on vintage theatre!
@ownyourworld5 жыл бұрын
4:25 And there’s me thinking that was cruise control 😂👍🏻 another great vid cheers
@Moonfleet415 жыл бұрын
Ha ha.. Ghetto Cruise control..
@ghostdog6625 жыл бұрын
Man you are excited about that english wheel. Should be some fun videos from that.
@Moonfleet415 жыл бұрын
Thank you buddy, i have a lot to learn..
@kuulbhaskar5 жыл бұрын
Wow looking forward for the next video too much excitement . Also i replaced the steering bearing myself yesterday with the help of your video and it feels so good.
@Moonfleet415 жыл бұрын
Hi Bhaskar, that is wonderful to hear, and we are so honoured that the video could help you, thank you for your faith and support, ride safe my friend, Del
@ukbertie5 жыл бұрын
remember when we were kids and watched sat morn tv ? well now im slightly more mature and this is my sat morn viewing ! be it with a hangover and brown sauce dribbling down my chin form the obligatory fry up ,! i enjoy your vids del ,not only do i learn but i have fun doing it and i think you will agree thats whats it all about ?
@Moonfleet415 жыл бұрын
Cheers Mike, Saturday morning TV? Swop Shop, Double Deckers, Noah & Nelly and Mary Mungo & Midge, happy days mate! Glad to replace such icons for you brother... have a great weekend!
@rsbharley47665 жыл бұрын
Nice video Del and Penny. All ready for the fun to begin mate lol. Looking forward to the fab work with all the new toys.Hope you both have a relaxing weekend. Cheers P.S you can keep the bloody rain.
@Moonfleet415 жыл бұрын
Hey buddy.. Looks like we kept the rain, but not much today, just a little at lunch time, soon dried out. Hope you had a great weekend too, keep in touch and rude safe,, D&Px
@aljotock5 жыл бұрын
Really looking forward to the English Wheel and Steam Punk look! Brill...
@TriDon-gw4wb5 жыл бұрын
Exciting times ahead. Good luck.
@americanotakuinc.96375 жыл бұрын
So Del small piece of advice for the Wheel when it gets there. A: Do NOT try and curve metal for 8 hours straight! Your forearms will be screaming. I speak from experience on that. B: The different dies will put steeper and steeper curves into the hammered piece. Practice with each one separately so you know which one puts which curve rate on a sheet of metal. C: Work the metal, don’t let the metal work you. Good luck mate! Can’t wait to watch!
@Moonfleet415 жыл бұрын
Thank you so much for that priceless advice sir., ill take it all on board, ir a totally new skill set for me and something i have wanted to learn for all my metalworking life... ive only bought a small portable wheel for now, no space for a proper one, and im sure it will still give me the principles i need to get started... Thank you again for the advice, that and the "watch your thumbs" will be in my ears as i start rolling my first ever sheet metal...
@scottthornton92375 жыл бұрын
Nice video on the "clean ups". I am looking forward to the up coming metal works! Watch ur digits with that English wheel, those things BITE! Anyone who is good with a English Wheel is worth there weight in gold. Best of luck to you with that thing! ( I can make wrinkles fairly well). Just no where near where i want one, of course.. A little hint with the "sand bags", ya just might try making a "Shot Bag" with one or two. By loading the bag with bird shot in lieu of sand. The weight difference all but kills the sheet metal rebound when using forming mallets. The weight also holds things in place very well. In the shop we call them sand-bags, but they are leather bags filled with lead shot. The higher the number the finer the shot. #7, 8 & 9 are common for clay sports and are common but more expensive. Some shops sell the #6 through #0 on sale as it is only used for hunting loads. (Supply & Demand dictates co$t) Many of us re-loaders have ample amounts of odd size shot on hand. So ask around. It is unfortunate that the cost of shipping lead (Weight + Hazmat fees) is way out of the park to send you my excess. Perhaps check with a gun club?
@Moonfleet415 жыл бұрын
Thanks for the great help and info Scott.. It seems like ive been reading about 'wheeling' all my life.. i was given a book as a kid back in the 70's by Eddie Paul, and was hooked, never stopped reading, i even used to buy is videos back in the 80's to learn and pick up tips and inspiration.. i always admired him and how he didn;t just build the coolest movie cars ever.. but was happy to teach and share his skills.. a sad loss to the Custom world when he died a few years ago... Ive got some silver sand on the way for the bag at the moment, as you can imagine with the very different gun laws we have over hear it a lot harder to buy shot in quantity, but ill see how i get on with the sand to start with, and as i have a few friends who go clay shooting, ill ask them if there are any sources for shot i can access... Thanks for your kind help... take care.. Del.
@HD2O13XL12OOC5 жыл бұрын
ENGLISH WHEEL !! Can't wait to see you using it 😉
@SurreyRider5 жыл бұрын
Great job Del, now that stuffs out of the way you can concentrate your skills on the fun job of fabrication!!
@arnybarmy5 жыл бұрын
Great Video Del - however the next one will be the real interesting stuff!! Can't wait! Have a good weekend folks :-)
@veeken7775 жыл бұрын
Good for you Del. 😉
@EdCase505 жыл бұрын
It's getting there Del... Not my type of bike but still very interesting and educational to watch, just like all the videos you do. I've learnt heaps off your chanel. Theres a guy called Ron Covell that teaches metal fabrication from frame building to pannel and tank making. Well worth a watch, he has a KZbin chanel and a few tutorial videos specialising in English Wheels. I've got 3 of his vids so if you want to view them let me know and I'll get them to you one way or another. Keep up the good work dude... Oh, and hi to Penny
@Moonfleet415 жыл бұрын
Thanks Ed, that's a kind offer... I really appreciate you taking the time to help, I have everything to learn on this and lots of theory to turn in to practice, so like with the lathe work and machining that I'm still very much learning, it will be a long, slow journey with a few mistakes along the way, am sure... but am gonna enjoy every step and stumble... if you need to get hold of me about the videos, just drop us a line to our email, which is: delboysgarage@yahoo.com keeps it private mate, thanks again, all the very best, D&Px
@garya30565 жыл бұрын
Hi Del- looking mighty fine. I learned tons from your “faffing” lol. Can’t wait to see the American, err. English Wheel in action! Hope you both have a wonderful weekend! (The wife has her Bianchina in a car show today, so up early with coffee in hand as I write this.) 🏍👍🏍
@Moonfleet415 жыл бұрын
Hi Gary, that sounds fun, we absolutely love a car show, have a great relaxing day and enjoy every minute!
@garya30565 жыл бұрын
Moonfleet41 thx, Del. It was hot as blazes but it was a good day all in all. 😎
@grosbeakmc5 жыл бұрын
Great series of videos refurbishing so far... maybe not your favourite part of a build but highly educational nonetheless. And thanks for taking a second to talk about those flat, smooth jawed adjustable pliers (wrench?) - I got schooled a couple of videos ago and it's nice to see them a little closer.
@Moonfleet415 жыл бұрын
Sure thing mate, they're dead useful, you will reach for them every other time you're in the garage, so for £30 or so, they're a worthy investment!
@robbymagen25 жыл бұрын
Good on you ,been happy with your work on the bike that real something regards Robert visiting the USA always looking for some parts for motorcycles to take home in Australia
@abhishekpratapsingh26884 жыл бұрын
Finally the video i was looking for👍
@videobymark4 жыл бұрын
Well I'm ordering a new tube and cables now ha
@gerrypowell27485 жыл бұрын
Looking forward to the next one Del✌️
@fader27015 жыл бұрын
Thanks for the video
@TechnMoto5 жыл бұрын
Great work mate but I must say looking forward to the build 👍👍
@Moonfleet415 жыл бұрын
Thank you sir, its an honour to have your faith and respect... been watching all of your videos in between working.. and damn you live in a stunningly beautiful place..!
@gilesbristow1235 жыл бұрын
Looking forward to seeing the English wheel, never used one so will be really interesting
@Moonfleet415 жыл бұрын
Me too buddy, something I've only ever seen other people do... exciting times!
@davidgriego87225 жыл бұрын
I have no doubt you’ll be a natural at the English wheel.
@Moonfleet415 жыл бұрын
Thank you for your faith David, time will tell!
@christopherdevries19695 жыл бұрын
It’s build-time !!! 👍👍👍. (How’s miss Penny doing ? Haven’t heard or seen her for a while).
@Moonfleet415 жыл бұрын
Hi Christopher, Penny is fine, busy in her own business and still plays a vital part off screen with the background work, and post production, but not on screen any more buddy... She says hi, and thank you for your kind support... have a great weekend... D&Px
@christopherdevries19695 жыл бұрын
Moonfleet41 Glad to hear that 👍. Saying hi back and carry on ! 😊
@leighmarshman55755 жыл бұрын
Good video mate let the fab work begin steam punk ??? Not sure but you will no doubt pull it off Have a good weekend chap
@al-69885 жыл бұрын
Salut mon ami Super boulot.on commence a voir la fin
@Moonfleet415 жыл бұрын
C'est bien mon ami, merci d'avoir regardé!
@al-69885 жыл бұрын
Toutes tes vidéos sont super. A tres bientôt pour la suite.....
@Cueballproductions11495 жыл бұрын
another great video dude
@shutinyanks27 күн бұрын
Any tips on an R6 2005? I've done everything so far. Replaced cables, adjusted tension, cleaned throttle tube out (it does has a crack in the plastic near the bar end but not fouling the bar) The only thing i can think of is the pulley as i removed it to clean. But it snaps back fine without cables on. Soon as i install cables it just sluggishly rotates and i still have 1/8th of a turn left before it's at 0
@Beemers325is2 жыл бұрын
You make the throttle part look easy, its awesome when everything goes back together with ease.Question have an old zx6 carburetor cable hooks between the 4 carburetors, little cable holder hook had an ear busted off that holds the cable& the lead o n the end was only half there, how would you tackle what I’m saying?
@scottsabin22455 жыл бұрын
The one iv been waiting for next the best bit can't wait
@BIG-K5 жыл бұрын
Bang tidy, Del 😊👍
@Moonfleet415 жыл бұрын
Sure thing Keith, always good to make a tidy, clean install aye?!
@pauleden53965 жыл бұрын
Cup of tea and 30 mins of indulgence. I let out a "nice job" when the orange rubber cover went on.. the simple things..
@Moonfleet415 жыл бұрын
Thanks Paul, sometimes little touches like that just work out aye?!
@royevans4581 Жыл бұрын
'I have invented a time machine' Well actually the throttles stuck open on my Hayabusa. I'm now in the year 2045. 🤣🤣🤣
@oceankeysmusic5002 Жыл бұрын
Beautiful
@motoedd24375 жыл бұрын
Nice work you throttled that old sneggy throttle big time.. Lol
@Sonu-on5de5 жыл бұрын
Great Video Sir!!! Love From India!!!😃😃
@Moonfleet415 жыл бұрын
Thank you Sir, welcome aboard!
@shainexxxsescrimshaw7605 Жыл бұрын
Love these videos, just curious, o own a mk1 bandit 600, my throttle cable must be really slack, I've adjusted it out fully at throttle end and still seems like too much free play, which direction is to tighten the cable at the carburetor ends of the cables, clockwise or anticlockwise
@abelbabel84845 жыл бұрын
Good lord, man, with these tools you named you could start whole armour workshop!
@Moonfleet415 жыл бұрын
ARMOUR... now you're talking!
@tinks435 жыл бұрын
(P) I can smell that burning rubber like my tubes yesterday with a soldering iron 🤣. Nice to complete all the little bits & look forward to the English wheel.
@Moonfleet415 жыл бұрын
Not an ideal way to spend your Friday mate, but every cloud has a silver lining mate! Put yer feet up (but don't cross them!) and have a great day tomorrow... love and hugs to you all, D&Px
@tinks435 жыл бұрын
Moonfleet41 even worse on our 6th year wedding anniversary 😡. Thanks guys. Have a good one!
@grahamrushin43845 жыл бұрын
Cool the brass,the old saying freezing the balls of a brass monkey. Brass shrinks a treat. 👍
@dazdncnfusd64475 жыл бұрын
Hey brother. Does the end of the fuel hose that connects to the tank need a clip of some sort? Just checking. I'm really loving this build so far, sir. Those basic maintenance videos are what brought me here years ago. I'm also a HUGE fan of steampunk, so can't wait to see what you do. Awesome!
@Moonfleet415 жыл бұрын
Hey Brother, yeah there was a clip missing from the hose. and as you saw it was chewed up too.. i simply don't have one to hand at the moment, which is no big shakes as the tank will be off and on again lots of times over the build and the tank wont have fuel in it for a long time yet... The steampunk theme is only a loose plan, it all depends on whether i can pull off the skills to make the bodywork and create the shapes i want... time will tell, this is a new skillset and something i have to get round first if i want to make a good job of it... Gonna enjoy the journey.. take care and have a great weekend.. Del.