Sportster Throttle Cable Adjustments

In this video I will show you how to adjust and lube your throttle cables on a hasrley iron 883 sportster, but this will work on all sportster models. Hope this video will help you out. If it does please hit the like button and subscribe to the channel! If oyu have any questions please leave it in the comments and I will give you the best answer I can. Thanks for watching. Links Below.
Links
Cable Luber
amzn.to/2wKfnVX
WD-40
amzn.to/2wTErdA
Wrenches
amzn.to/2vFTCCO

[@joshferguson2870]

6 years late but great video man. great explanations and how to.

[@bernardlesperance742]

So far this is the best video I've seen on how to adjust the throttle cables. Thanks a million !

[@n0nn0n]

Thank you for this thorough guide - Been wanting to adjust my cables for some time and you just inspired me to go with it

[@MrCcarter7]

Thank you for posting this video! Very good instructions. God bless in Jesus' name.

[@TonysGarage]

Glad it was helpful.

[@notadog]

Hey dude. This saved my ass today. I was ankle deep in tension issues with the throttle, and not even the HD dealership could explain it as well as you did. Thanks for passing on your knowledge, as well as keeping me safe on the roads.

[@TonysGarage]

Glad it helped👊👊👊

[@shahrukh817]

Thanks so much for the video! I was having too much play before the throttle opened up. Can't wait to go home and adjust it. Your videos are amazing bud!

[@TonysGarage]

Glad it helped! Thanks for watching!

[@nfan883]

Cannot thank you enough for making this video!! By far, your video is the clearest one on KZbin explaining the touches of throttle and return ledges. Your tutorial is simple, clear & concise. Here is what happened : I put bar risers making my cables ended up too tense and the throttle became very sticky. My local dealer said I need to get a pair of new cables and it costs me around 250 dollars. Plus, I need to leave my bike with him for one week because of all the cable measurements, swapping and adjustments. Thanks a lot !!!! You have a good one !!

[@g0nk]

Dude these videos are on point!! Excellent series so far!!

[@TonysGarage]

+RideWithGonk Thanks Gonk! Hopefully I can get the auto focus to work better on the next one.:)

[@funguseater40]

Your video's are so clear and concise. Keep them coming, much appreciated :)

[@TonysGarage]

Thanks, glad they are helpful

[@brianbradford6570]

Great video that’s helped me out with adjusting my cables. Thank you 🙏

[@LIGHTNING351]

Just got my first Harley. A 2007 Sportster Custom 1200. Thank you for these videos. New subscriber.

[@MrBigerok1]

Damn bro , great video . Very easy to understand and right to the point . Thank you!

[@guitarrockstar23]

You’re video helped me adjust new cables. Thanks man!

[@TonysGarage]

Glad it helped👊👊

[@KeithBeTatted]

Will be adjusting my throttle cable today. Thank you !!

[@TonysGarage]

Glad it was helpful. Thanks for watching ride safe

[@mr.lee114]

This was extremely helpful. Thank you!

[@TonysGarage]

Thank for watching!!! Ride safe.

[@dirtrider0427]

Easily one of the best Instructional videos I’ve ever seen. And I’ve seen A LOT throughout my time. Short, sweet, to the point, and covered everything. Awesome video man, thanks for the help!

[@christopherphillips3733]

Thanks. Much easier to follow than the Clymer manual...

[@rolandwillems1]

Have had my original throttle cables for 20 years on my sportster. This weekend it broke for the first time.I ve never lubricated anything. But like your videos!

[@TonysGarage]

Thanks for watching👊

[@midgetwitha50cal13]

Good video. My throttle cable feels like it's starting to stick a little and I have factory cables so now I know to take everything apart and lube em.

[@brentpurvis2406]

You deserve way more subs these videos are extremely helpfull

[@TonysGarage]

Thank you, only about 5 months in hopefully the suns will come. Thanks subscribing.

[@wesleymarkmusic403]

Very helpful. Great video. Thanks.

[@johnbattenburg9747]

Thanks, good video instruction, great for changing grips.

[@genosouza587]

Very informative. Nice video !

[@TonysGarage]

Glad it helped Geno. Thanks for watching and ride safe.

[@LordLMCF]

Dude I love your videos keep the info coming brothuuuurr

[@pmaly9473]

Thank you Tony, much appreciated.

[@FJB24586]

Excellent video thanks!

[@marcfelstead2546]

Very clear instruction👍🏻

[@TonysGarage]

Thank you.

[@JCHEY]

Very good/informative 👍🏼

[@Liquormans]

Great Help. Good video . Good Teacher.

[@TonysGarage]

Thanks, glad it was helpful.

[@Jacob-gp3ru]

Can you do a video on how to replace a clutch safety interlock switch? I broke that piece when trying to replace grips

[@robertlumsden1579]

this is very good. gives me confidence to do this. nice.

[@TonysGarage]

Thanks, hope it helps

[@MikaelMaatta]

Thank you, another great and informative video

[@TonysGarage]

Thanks for watching👊👊

[@othmana2979]

Great video, thanks.

[@jeffreyswiggett3379]

Another great video!

[@TonysGarage]

+Jeffrey Swiggett thanks

[@anthonyscott16]

Great lesson man. Thanks!

[@TonysGarage]

Glad it was helpful!! Thanks for watching and ride safe.

[@shawnmlynch]

Good stuff, thank you sir

[@Thickfreakness817]

Thanks for the help!

[@Imoverit2]

Great video, subscribed.

[@TonysGarage]

Thanks for watching!!! Thanks for the sub

[@kev_meistr]

Thanks so much! Super helpful

[@TonysGarage]

Glad it was useful!

[@heronaugustogomes]

Hi Tony's Garage your video is very good! I from to Brazil and I have one sportster 1200. My bike has a problem or balance. Do you have a video that changes the balance? Sorry, but my english is terrible.

[@TonysGarage]

Glad the videos are helpful. I am not sure what you mean by “balance”.

[@davisle3739]

Great freaking video man. 👍🏻

[@TonysGarage]

Thanks for watching 👊👊

[@TheJesse1959]

Tony's Garage hi watched your video on adjusting the throttle cable on the Sportsters I have a question for you I own a 97 883 hugger Sportster CV 40mm carb now on this type of carb routing the throttle and I del cable's would I route the throttle cable to the front side of the butterfly cam and the Idea cable to the rear side of the cam?

[@TonysGarage]

Throttle cable will always pull the throttle open. More than likely it is the frontside. Hope this helps thanks for watching and ride safe.

[@bigblue3568]

Some explain how to adjust or use that star looking screw adjuster between the two cables... Thanks.

[@nikky360]

Thanks for the video

[@TonysGarage]

Thanks for watching👊👊👊

[@chrisaskme811]

What is the star like dial between throttle and return/idle cables under housing?

[@josedaniel4725]

Mucho gracias Amigo, throttle cable loose and has play at entrance to housing

[@sumyunguy9930]

Thanks Tony

[@willjelsma2287]

What a great, clear video that explains how everything works. This is probably one of my favorite car/bike maintenance videos I’ve ever watched.

[@oswardg15]

Hey Tony, I hope you are okay. I'm new on this, got a question! Both cables need to be lubricated is it? Or only the front one that opens the butterfly? You made me that confident to do this, and go a head with my bike 😅

[@TonysGarage]

Both cables need to be lubed. Thanks for watching👊

[@oswardg15]

@@TonysGarage Thanks a lot. 🤘🏼

[@edwinherrera-nieto-]

appriciate the video, just a suggestion, maybe have someone operate the camera, it's hard to see what you're doing sometimes.

[@alanyaesu2189]

nice vid but i do believe you do not put the lube tube in the hole in the top the lube hole is on the side opposite the tightening screw the hole on the top is for holding the rubber insert in place at least it is on the one i have in the uk.

[@newwavepressure6478]

Thanks bro i brok my idle cable and i was just goin to order a throttle cable i thought they where the same ill order an idle cable now

[@TonysGarage]

Glad it was helpful. Thanks for watching!

[@Electricianarchery]

I was wondering if you could help. My throttle cable is max adjusted and even if I run out of threads my throttle doesn't open 100% are my cables stretches

[@kristopherlopez2763]

Hey Tony, I want to get magnum cable as well. I have I 8 inch bars, I want to replace all the wiring, would you be able to help select which options are needed?

[@TonysGarage]

It has been a few years since I purchased those. Let me see if I can dig up some old invoices

[@kristopherlopez2763]

@@TonysGarage thank you🙇

[@anurodh2k7]

I just got a 2018 Sportster custom XL 1200. My idling app is very high and even without applying throttle the engine races. How can I reduce the idle so that the bike goes slow when not applying thro?

[@KingThor-ii9rg]

so how do you adjust the throttle cable and return

[@astrobear1236]

I installed a stage 1on my sporste. I was an idiot and fiddles with throttle body flap when i had the air cleaner off. When i started my bike up with the vance and hines fp3 it gave me a throttle position sensor too low and i can smell my bike running rich. will this help me reset my throttle and fix that issue? Thanks for any tips or advic.

[@TonysGarage]

I would give Venice and Hines a call for a recommendation. They are very helpful with situations like this. Ride safe.

[@astrobear1236]

@@TonysGarage i got it foxed myself i was making it out to be bigger than it was lol but thanks.

[@andrzejwierzbicki9856]

Thanks mate.

[@TonysGarage]

Glad it helped!

[@djmysticalone321]

Do you have a video how to but on a longer cable kit

[@TonysGarage]

I’m not sure what mean?

[@SinnerSince1962]

@@TonysGarage He want's Ape Hangers.

[@eric4467]

Subbed!

[@TonysGarage]

Thanks for watching and the sub Eric👊👊

[@willx1987x]

Awesome thanks.

[@TonysGarage]

Glad is was helpful! Thanks for watching.

[@willx1987x]

@@TonysGarage went on a group ride and my shit kept sticking at 10%, you saved me a ton of cash. Do you got merch?

[@TonysGarage]

@@willx1987x working on it now should have some in the next couple of weeks .

[@garythomas971]

i cant thank you enough

[@TonysGarage]

Glad it helped👊👊👊

[@irishguyjg_2ndchancerecovery]

You sound alot like Bill Pullman. True lies lol. Thnx again bro

[@shannonrusso3635]

Do you have too lube both cables?

[@TonysGarage]

Yes maam

[@Jacob-gp3ru]

I swapped grips and didn’t adjust anything, now my bike won’t start unless in neutral, is it because I didn’t adjust the cables?

[@TonysGarage]

Check the clutch pressure switch.

[@debbie3fan]

Thank you thank you thank you LOL

[@jaimeb.384]

My stock adjustement nuts, ust wont move. It is driving me crazy.

[@TonysGarage]

Try some heat and pb blaster.

[@evelynvanwinkle1942]

Now I SEE

[@davesurrey5889]

Cool,know I know which one is throttle

[@TonysGarage]

I know, I got a little excited there. With all the different views I just wanted to be clear.

[@davesurrey5889]

Tony's Garage all the views are great,now I know difference between the two

[@TheSpecter1990]

We really need to drop our wrench like that ?

[@SinnerSince1962]

Or... you can count the threads and put both of them back where you had them to begin with.

[@evelynvanwinkle1942]

Saving me 800.00

[@arsmithle5499]

Tbh, there’s a lot of talking and you still don’t clearly show how to adjust it.

[@j.p.7272]

Great video. Thanks!

[@TonysGarage]

Thanks for watching