Dell Optiplex Swap to SEXY PC Case!!! -- Full Case Transplant

[@PCTechHustle]

Check out my other Optiplex Videos! i7 Upgrade! -- kzbin.info/www/bejne/hYGkqWVqbtBnmM0 $220 Optiplex Build! -- kzbin.info/www/bejne/hZjIm5aAnK6Ej6M

[@memeO_8]

For the power switch problem you can buy a adapter on ebay

[@albarazi_ali]

Finally someone who fully described how to do a dell optiplex case swap and covered all the details

[@PCTechHustle]

Thanks!

[@sarahperalta2486]

Fr bro like I have been looking for this

[@roccorocco2369]

​@@PCTechHustle where you put power switch is it the same with 790 mini tower board ? Second thing you didn't mention where power led minus and plus direction ? I need your help man Thank you in advance

[@djscrivbits8807]

Pre-Built companies taking notes rn

[@id767]

hahahahahahaha

[@sym1238]

[phone]more rgb

[@aryan.a1z511]

lmao good one

[@lurret]

LMFAO

[@callmedillon8224]

They would sell it for 1000 dollars lmao

[@blrrrrdOut]

Yes I've been waiting for this the dell optiplex looks so good in its new case I love it!!!!

[@PCTechHustle]

Thanks! I am not going to lie! I really like how it looks now too! :) Thanks for stopping by!

[@darkmystery4300]

IKR me too

[@Kingkloudz100]

Love your build‼️. Clean work 👍 I did something g similar recently. Check it out Dell Optiplex to Gaming PC Build!

[@josephamaral419]

Awesome video. This is basically my first "build." I swapped a 9020 to another case and chucked in a RX 580. Only thing missing really is all the new MOBO features.

[@PCTechHustle]

Awesome!

[@HowToRacist]

Cool

[@TheBlueNova2011]

I did the exact same thing

[@kast2890]

I’m just gonna cut out the side of the optiplex case and put a piece of tempered glass

[@PCTechHustle]

Sweet! I would love to see it!

[@shameermalik5540]

I thought the same but the original case is too small and my gpu has very little room for air flow

[@kurtscheuermann93]

@@PCTechHustle hey I just got an optiplex 990 for my i7 3770k, I want to know the fan pinout diagram if you know it so I can use regular 4 pin fans on cpu and system.

[@kurtscheuermann93]

@Cj Miller someone told me the socket work for that cpu but dell MB never realease an update to run that cpu. Im trying to get an old cpu borrowed to update bios but at the moment, I just put the mb into a box.

[@kingcartierjs7022]

yeah I might do that too if I ever get my hands on one

[@dmac93065]

I watched this video specifically to see if you addressed the ambient temperature sensor. I've been living with an F1 error for a while because I didn't pay attention to where the header was located on the MOBO. (Coincidentally, there is a workaround in the bios to lower the RPM's of the fans but it's great to eliminate the problem altogether.) You took the time to point out the header placement and I was able to get rid of that error for good. Nicely done video!!!

[@PCTechHustle]

Awesome! Glad it helped!

[@luisperedah]

Derek can you tell me how to lower the rpm's of the fans please. I really need it.

[@dmac93065]

@@luisperedah There’s a fan control setting in the BIOS that I used to get the fans to run normally until I saw this video.

[@luisperedah]

@@dmac93065 Thanks, so if i use the 3 to 4 pin connection to power my fans, is there any way other than the bios to not make them go full speed?

[@dmac93065]

@@luisperedah Not that I’m aware of but I may have missed something. I searched Google to find the solution I shared that worked for me. Maybe it could help you too?

[@itscass9153]

Here in the PC universe- we like to think of ourselves as PC doctors and surgeons 😎 Subscribed.

[@PCTechHustle]

Hah! Thanks for the sub! Have a good one!

[@danielmazurvideos]

I just got a 9020 for free and I've been searching for a "what to do" vid to upgrade and this video is it. I'll get the case, upgrade some components, and it's done. Thanx.

[@jasone1881]

Damn! I paid 500 for an upgraded 3020, basically everything in the 9020 in a 3020 SFF.

[@danielmazurvideos]

@@jasone1881 After my post I checked to see what kind of CPU it has, expecting an i3 and it has an i7 already in it, so I'm good there.

[@Elkay26]

@@danielmazurvideos a 9020 optiplex with an i7 for free? That's the best optiplex you can get lol, lucky donny. All you need is an rx 570 and that's a very decent rig you have there

[@mikescomputercorner1204]

great information on whats needed for these transplants ..so great stuff!!

[@PCTechHustle]

Glad you found it helpful

[@xerishy2829]

Thanks for all the help. I'm definitely going to do this with my Optiplex build.

[@PCTechHustle]

Nice!

[@MrTryoutt]

My guy! Just bought a 790 to build a sleeper but hated how it looked 6th for this vid

[@willian988]

after 5 months your still responding to comments, what a lad!

[@PCTechHustle]

Of course!

[@Aleli54]

There is an adapter kit on ebay for like $20 that converts all the connectors so you get no errors

[@PCTechHustle]

Aleli54 nice! Good tip for someone if they want to avoid the errors! Thanks!

[@mg86_]

it only ships to the USA though

[@Blxq]

This video looks so professionally edited keep up the fantastic work 😁

[@PCTechHustle]

Thank you! I try!

[@Blxq]

@@PCTechHustle 👍

[@darkmystery4300]

Are there any other cases you recommend that are cheaper? Also what’s the difference between the bigger optiplex and the smaller optiplex?

[@PCTechHustle]

There are tons of low budget options out there, it really just depends on what you are looking for aesthetically and how much you want to pay. I typically like to stick around the $30-50 mark building a low budget build. My best advice is to just do a search on like PCPartPicker and target a spend range.

[@pluontop-b]

J

[@johnnygallardo76]

@⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻ Do you know if the Optiplex 390 Mini Tower motherboard with fit and holes line up for the DIYPC s07 case? And can i use the same method as on this video?

[@ironliterature4908]

keep it up man youre helping the community. cant wait to do my first build!

[@PCTechHustle]

Thanks! Glad I can positively contribute!

[@Dyllv]

I’m building this for Christmas for sure

[@PCTechHustle]

Nice!

[@youknowme2003]

Some tipps to Improve the Build - There are 7v Molex to Fan Adapter so the Fans run much Quieter ( Max RPM of Fan/ (devided) by 12v x (Times) 7v = Fan RPM Speed). I.e. ( 1500RPM/12v = 125 RPM x 7v = 875 RPM) - Buy a Dell Optiplex 5 pin to 4 Pin/3Pin PWM Adapter to use the Fanheader thats Causing the Error to Pop up ( Recommand a Low Noise Low RPM Fan) - If the F1 Error Still Pops up because of the Frontheader problem you can literally Cut the Front Connector Cable from the Dell Optiplex tape the end with Electrical Tape and Leave it Plugged into the Motherboard That should fix it.

[@PCTechHustle]

Thanks for the tips!

[@teqzwyd]

I’ve watched this 5 times, I have a dell optiplex 7010 with a i5-3470 and I’m upgrading the psu and putting a 1650 Phoenix oc edition In it . Also down the road I’m upgrading to a 1650 super with a i7 buy yeah thanks for all your tips and tricks.(I love your videos)

[@PCTechHustle]

Thanks! Good luck with your upgrades!

[@Le_Papa]

Thank u Dad

[@PCTechHustle]

Your welcome, son!

[@Le_Papa]

PC Tech Hustle can I use this pc case www.amazon.com/Montech-Mid-Tower-Ventilation-Tempered-Pre-Installed/dp/B08CMPQ6YB

[@Deuteriumaddict]

What only 2.96k subs. Bro your so underrated

[@PCTechHustle]

Thanks man! I’m trying!

[@chkngsong3776]

@@PCTechHustle 8.9k

[@quanic_en_calzones]

I STRONGLY recommend to replace that Thermaltake PSU. Those things are a firehouse.

[@PCTechHustle]

I’ve heard some things but also some other things. I haven’t had an issue yet though

[@vid3734]

ey i got this as an notification, ain't even subbed, aldo i liked your vid so you getting a sub👍👍

[@PCTechHustle]

Thanks a bunch!

[@madmickyh2162]

Nice video.... I have a 790 sff with a few upgrades and was thinking of doing this but now I'm kinda liking the fact that it's so easy to clip everything in and out of it and the fact it's not much bigger than my ps4 is a bonus aswell.. Only thing I'm not keen on is the airflow as gpu is directly above the psu which is pretty much maxed out with gtx1650 and a few other bits n pieces. Was thinking about maybe fabricating the case a bit and adding a fan off 4 pin molex and maybe putting a vinyl wrap on the case

[@stemdeckesupreme164]

I cut a 120 mm hole in the side of the case, found a sata splitter and sata to 3 pin fan adapters. put ablack domed grill over it and completed the dell logo with a silver sharpie

[@BamaChad-W4CHD]

Great video. The optiplex motherboard and plain bare ram looks so odd in a Lian Li case. Its one beautiful case. I still appreciate seeing the optiplex at its apex lol

[@PCTechHustle]

Thanks! It’s was more for just fun of doing the swap if anything. I actually swapped everything back to the Optiplex case after this video

[@Aesthivate]

This channel is so underrated but anyways this is pretty cool

[@PCTechHustle]

iWrath ML thanks so much!

[@razvy6949]

Many thanks I needed to figure out something for the IO things. Really helpful

[@PCTechHustle]

Awesome! Glad you found it helpful!

[@PCTechHustle]

DON'T FORGET TO SUBSCRIBE!! Also, be sure to tick the bell icon to be notified when a new video drops!! THANKS FOR WATCHING!!!

[@jontron6435]

Great video! I used your advice on plugging into the power switch header. Glad I didn’t need a jumper and instead used the power +/- cables

[@PCTechHustle]

Glad you found it helpful! Thanks for watching!

[@thefrwanky6728]

Wow I was going to do something like this but didnt know how nice it would come out, great build man

[@PCTechHustle]

fj_ price thanks!!!

[@thefrwanky6728]

One question though, dont u have to reinstall the thermal sensor? Or did I miss it?

[@PCTechHustle]

@14:33 I did reinstall it.

[@thefrwanky6728]

Ah thank you

[@jesslied8776]

The cable management is crazy on this case

[@PCTechHustle]

It is quite lovely! One of my favorite mid tower cases!

[@powerhouse5358]

Now give it an insane name put it on way and you have 600 dollars

[@jacerlab]

Thank you so much! I recently bought an older pc, it works great and i love it but damn that case looks horrible haha so I want to get a new case but didn't know if it was possible and your video really helped me make the decision to actually do it.

[@PCTechHustle]

Awesome! Glad you found it helpful!

[@marshallpieri3737]

Did you do it? Were you successful?

[@jacerlab]

@@marshallpieri3737 nope. Just bought a fancy pc haha

[@marshallpieri3737]

@@jacerlab lol wish I could afford that rn I'm thinking about doing a case swap but I don't know I probably just need a whole new pc

[@maverickmontages4465]

Nice video man!

[@PCTechHustle]

Thanks!! Much appreciated!!!

[@somebody4450]

This helped a lot because I’m planning to get a ionz kz10 case and then I figured out that I can water cool this system so thanks

[@PCTechHustle]

Awesome! Glad you found value in it!

[@Sonic_1000]

Nice. Now I wanna do this to the wife's Dell!!

[@PCTechHustle]

Sonic_1000 nice! Do it!

[@galacticempire1362]

I have a HP Pavilion Desktop, the motherboard is proprietary; but the GPU and CPU are not proprietary. So could I put them in a different system and have full functionality?

[@abadmiah4906]

loved it man

[@PCTechHustle]

Thanks!!!

[@tart5928]

amazing build

[@PCTechHustle]

Thanks!!!!

[@IzzyIsntReal]

Now if you dont look at the inside of my PC, I look like a high end gamer lmao

[@PCTechHustle]

Hah! Yeah this was more for the demonstration. I actually ripped the Dell components back out and used the case for a nicer build.

[@Techlikeme]

With a bit of jigging you can swap the power switch to the new case and it works great

[@mohamedali7887]

thank you soooo much you helped alot!!

[@PCTechHustle]

Absolutely! Glad you found it helpful!

[@jj_yvng5044]

U cant even tell board is green unless panel is off

[@PCTechHustle]

😉😉😉

[@jddkdj5832]

did the case come with any screws or other extra things? like cables etc

[@PCTechHustle]

It comes with tons of extra stuff. Lian Li always provides in that department. They give you enough to basically max it out. Plenty of screws, cable ties (even Velcro).

[@chilledbroccoli899]

hey mate i saw some fans that all of them could conect to eachother and you could put 3 or more fans all conected to the cpu fan. they whare tempest fans from a pc case tempest shade

[@PCTechHustle]

Yes, it is possible to daisy chain fans. I wouldn't recommend more than 3-4 though if connecting to the CPU fan header.

[@Smoothies_010]

Hi i really wanted to recase my Optiplex 3010 but the people around in pc shops dont know how to do it like you. Its sad i diddnt have the knowledge to do it

[@PCTechHustle]

That could be very unique request for a typical repair shop but hopefully you found value in my video here and hopefully it’s provided you enough information to take it on yourself

[@fwuffy2713]

I wanna put my dell optiplex 7010(Desktop Form Factor) in that case, is there anything I will need? Or any problems I might run into?

[@PCTechHustle]

For those models you will need a motherboard 24-to-8 pin power adapter, aside from that no nothing really more needed.

[@ve6009]

@@PCTechHustle Could I transfer the existing CPU into a new motherboard along with a new case? I know it's probably a obvious question but I'm not familiar with the Optiplex design.

[@tashi7911]

@@PCTechHustle But as far as I know the 990 and 7010 have the 24 pin one instead of the 8 pin, at least the Mini Tower ones. I saw and the ones that have the 8 pin are the Optiplex 3020, 7020 and 9020

[@arsynic4202]

@@ve6009 yes

[@mubaris.s]

omg i luvvv thisssss 😍😍👍 gooood eefing video sir, lol

[@PCTechHustle]

Glad you enjoyed it!

[@dylanupton4211]

Loved the vid !!! Quick question, i have a Dell Optiplex 9020 SFF, can i also change case without any problems?

[@PCTechHustle]

Dylan Upton yep same process applies!

[@isaiobs8081]

Hi, I have a dell optiplex 7040 sff, can I change the case without any problem? Good video

[@PCTechHustle]

Hey there! Thanks for watching Unfortunately they model has some strange proprietary connections directly soldered / attached to the motherboard. That will be a very challenging swap, if doable at all. Might try searching specifically for that kind of swap though I haven’t seen it done.

[@ssjbart2003]

Great video! Do you think the newer Optiplex 7090 motherboard would fit in this case? Thanks!

[@PCTechHustle]

Thanks! Yea it sure would!

[@brandongutierrez1445]

What is the name of the first wire that you connected to the ones that go to the side of the ram? Power SW?

[@mikey510]

i added some fans in my work computer which is an optiplex 7080 and i used a SATA to 4pin splitter that works great, so thats an option too opposed to Molex

[@alexdillon283]

What is the case called, i lost my old pc and got a new one so i wanna upgrade the case

[@PCTechHustle]

Lian Li Lan Cool II

[@Bruh-od4ce]

how do u lose a pc

[@alexdillon283]

@@Bruh-od4ce i just meant that it stopped working

[@RaoulMifsud]

You mentioned the front I/O needs to be plugged in(from the old Optiplex 9020) so no errors would come up and cpu fan would not go to 100%, however the last Caveat mentioned is for the temp sensor and seems you left the front I/O from the old optiplex unplugged? I watched that part 2/3 times and cannot see it plugged in and was not mentioned again, just to confirm that needs to be plugged in and tucked away somewhere yes? Thanks!

[@PCTechHustle]

I plugged in the front power switch, the USB 3.0 into the expansion card, the front temp sensor, but left the HD Audio unplugged as it’s not necessary or will cause errors. However I have recently discovered adapter kits for Optiplex front I/O that actually makes the process even simpler www.ebay.com/itm/Dell-Optiplex-7010-9010-7020-9020-and-Precision-T1700-Front-Panel-Header-Adapter-/264733441811?_trksid=p2349624.m46890.l49292

[@RaoulMifsud]

@@PCTechHustle oh that’s perfect then i ll get those adapters , thanks for the quick reply, looking forward to swapping this out tomorrow and will wait for the adapters to arrive. So were did you hide the front I/O from the old Optiplex? Near the PSU? Thanks again!

[@CM22ENT]

This is great! I have the dell precision towrr 5810 and it seems unlikely that doing this would be the case unfortunately 😪

[@PCTechHustle]

Yeah some are very tied down to proprietary design

[@johnfurman5946]

Do you know if the SFF ones have the same size motherboard so I could do this to one? Because they’re much cheaper

[@PCTechHustle]

I believe they are! I’d have to research a bit to confirm though.

[@robertgable2544]

Hey! I love the video!! This is helping me so much with muy build :). Will the front I/o be connected/usable? I can't seem to figure out where to plug in all the connectors that the case comes with.

[@PCTechHustle]

Actually they make adapters for that now! www.ebay.com/itm/Dell-Optiplex-390-3010-3020-Front-Panel-Header-Adapter-Kit-3pc-/264638815586?fbclid=IwAR3w77VkGps7bh_2l7-UqcW-V7bOLluf3IJqz-hr9bKG1eGqn3LCl9JCe38&pageci=1def206e-87cd-4f71-9d05-39a66e99799e

[@johnnygallardo76]

My optiplex 390 where the power switch connection goes yours has the connections going from left to right while mine has the two pins going from right to left leaving the fifth pin on the very left hand side on top how should I proceed when making the connections just opposite of your connections?

[@PCTechHustle]

So you found the 2 pins that complete the circuit for the power switch?

[@johnnygallardo76]

@@PCTechHustle Yes there are 5 pins in all like yours in the video but mine on my optiplex 390 mini tower board the lonely 5th is on the bottom left while yours is on the top right i'm wondering do i make the same connections for the power switch like you did on the video but just the opposite with the labels facing away from the memory or toward it? ill upload a pic 1 sec.

[@johnnygallardo76]

Will this setup work for a optiplex 390 mini tower? And can you please let me know what other cheaper pc cases with tempered glass this optiplex 390 mt board can fit? ( does not need to be rgb i'll put in lights myself ;)

[@PCTechHustle]

Yes it will work just the same.

[@nhguapo]

+1 just for the music at the end. I'm kind of curious about the power switch. I did a case swap on a Dell Opti build a few months ago. I had a hell of a time with the power switch - it was not like the one on your board. I ended up cutting the cable from the old case in order to use the power switch adapter it came with and then splicing into it with the new case which was a Fractal Design. Your solution just wasn't an option, but I sure wish it was. That Lian Li case is great - I've been waiting to pick one up, but they never are around on Amazon. Did you try using a 5 pin female to 4 pin male adapter cable for fan? They have one on Amazon for under $10.

[@PCTechHustle]

Glad you made yours work! I didn’t get an adapter because I knew I would still face a boot up error anyway, good tip though!

[@heysonimback760]

I tought this dude was Elon Musko for a sec. I jumped

[@PCTechHustle]

Lol!

[@anthony7486]

The power switch was a pain. I did the Optiplex 790. After all the cable routing etc.. I can't get it to boot. Powers up fans spin but no output on the monitors (Either onboard or PCI) . I hooked up the Front Bezel controls back to the mobo for troubleshooting and I got two blinking Amber lights, some research suggested change the Cmos, did that, and nada. Anyway, I just bought a new mobo, I will transfer the CPU as it is the same socket. Thanks for the vid, super helpful with the proprietary fans etc..

[@PCTechHustle]

Sorry to hear you had trouble with yours! God you still found some value in the video though!

[@pizzagalaxyvid1874]

hello! I bought a dell optiplex 7010 and i wanted to do a case swap so i bought a coolermaster masterbox ml311l case and i know how to do mostly everything but i am still confused on the power switch part. do i need to buy anything for it to work or im not sure? thank you

[@PCTechHustle]

You don’t need to buy anything additional. An aftermarket case will come with the cables required to connect the power switch to the motherboard. You will just have to locate the pins that provide that power.

[@pizzagalaxyvid1874]

@@PCTechHustle thx m8 hope everything will go well with the case swap!!

[@PM5kBlast]

Coming at ya with another VIDEOOOOOOO shout out Jeremy from G+G

[@thedungeondelver]

I don't know how, I don't know why, but good lord those Optiplexes are just great machines. I know everyone's all agog about the price/performance of new AMD...but honestly, for decent gaming, this is all you need. (Note: Decent, not full-bore PCMR 240hz/240FPS water cooled SLI everything gaming :) )

[@PCTechHustle]

Agreed! If you are just after some basic game at medium time high settings these machines will deliver!

[@luckyleroy8833]

Hey just wondering what i need and if i could swap my case for my dell optiplex 9020 sff to. Montech Fighter 500 ATX Mid-Tower Computer Gaming Case/Pre-Installed Four Rainbow LED Fans, High-Airflow, Mesh 3D Front Panel, Tempered Glass, Magnetic Dust Filter/ATX,Micro ATX,Mini-ITX, Black. Just found it on amazon for a good price and needed to know if this would wark and what else i needed to buy to swap the case. Thanks

[@superdennisdt]

nice budget build I'm doing the same with a OptiPlex 3020 and a aero cool 500 case, I have built adaptors for the power switch/power led and hdd led. I only faced with 1 start-up warning (the i/o cable failure) I believe its the green front panel usb2.0 header on the motherboard, the problem is is the pinout of the header normal usb2.0 or has dell used a different pinout do you know any info about this

[@PCTechHustle]

Yeah you are right. There are adapters you can buy too yo sold all the front panel connections issues. www.ebay.com/itm/Dell-Optiplex-7010-9010-7020-9020-and-Precision-T1700-Front-Panel-Header-Adapter-/264733441811?_trksid=p2349624.m46890.l49292

[@razvy6949]

Hi dude. Can I ask you something? I did the same things, but the front I/O audio cable, where does it go?

[@PCTechHustle]

Unfortunately that one is a big pain to cable up since the dell motherboard does not accept a standard cable. You would have to do some cable spicing into the case harness for the front audio. I just decided to skip that because I never use the front audio jack and I think most other people don’t either.

[@lauranusen8357]

Can you connect an AIO water cooler to the Dell Optiplex 9020 MT motherboard on a case swap?

[@PCTechHustle]

That I’m not entirely sure of. I want to say yes but have never tested that myself.

[@aidandeng950]

Great video! I recently got the 790 sff and I’m wondering if I can swap the case the same way you did

[@PCTechHustle]

Sure you can!

[@aidandeng950]

@@PCTechHustle will the 790 SFF motherboard be able to handle the power of the RX 580 or RX 570?

[@PCTechHustle]

You would need an upgraded power supply to handle a card like that but everything will work fine

[@aidandeng950]

@@PCTechHustle ok thanks!

[@TheJmbf10]

You can take the fan from a ryzen stock cooler (pull the amd sticker) and swap it onto the stock dell heatsinks for a little performance and aesthetic boost!

[@PCTechHustle]

Oh really?? I might have to try that!

[@TheJmbf10]

@@PCTechHustle The footprint for the fan screws is the same but the round fan diameter fits the heatsink way better than the stock square fan.

[@TheJmbf10]

And it's quieter

[@PCTechHustle]

Awesome! I have a spare I want to test this! I actually have a new Optiplex build coming. Thanks for the cool tip!

[@bossbear0803]

Im gonna need to do this if I were to somehow need to upgrade my pc which is a prebuilt in the future

[@onsumshxtt]

wait so not having front panel auido does that mean your pc wont have any audio at all or is there still some way that you can get audio from the pc? Edit: i really want to swap my dell optiplex but i dont want to if i wont have any audio at all

[@PCTechHustle]

No just means the front audio jacks won’t work. You can plug into the back for audio or if you have USB that works too.

[@afufu-b5k]

Hello, I watched a couple of videos. You are really good at what u do. So I was wondering have you ever tried doing mini ITX budget build?

[@PCTechHustle]

I want to! They come at a bit of premium though having to use SFF parts. I might look into doing that though as an HTPC.

[@afufu-b5k]

PC Tech Hustle hoping maybe in the near future. When economy starts rolling again. We might see some cheap itx build. Cheers ty for the reply.

[@snowfull1029]

Also again. I'm planning on getting the same case. So the case itself basically is a jumper for those power switches? Like does the case come with those power led jumpers that you connected.

[@PCTechHustle]

Yes the case comes with the power cables for the front controls.

[@gritty-1290]

PC Tech Hustle hey i just got the case. I was setting it up but I can’t fit some screws for the motherboard

[@gritty-1290]

PC Tech Hustle like it won’t fit at all.

[@soimaspidersowhat7993]

Hello, is it possible for optiplex 380 to transfer into new case and then gradually upgrade each part?

[@PCTechHustle]

Those series are a bit tougher to do things like this.

[@ShotByDale]

Danny, great video. Eabod

[@PCTechHustle]

Lmao! Love you Dale!

[@SimpleElectronicsFL]

i have a optiplex 9010 and want to upgrade the case is there anything i would need to purchase other then the case

[@PCTechHustle]

If your motherboard has an 8 pin motherboard power connection you will need a 24-to-8 pin adapter. That’s about it!

[@zyride5784]

Can i case swap the newer model optiplex like the 3070 as front connectors is already available on the motherboard? Please help if it is possible to do or not worth it Currently have the 3070 model + Gtx 1060 + extra psu to power gpu

[@PCTechHustle]

No that would not work as those types of Optiplex's have very locked down proprietary design.

[@zxexzy8476]

Thank you

[@PCTechHustle]

Sure!

[@zxexzy8476]

@@PCTechHustle by any chance how much FPS could it run on fortnite

[@mr.hornblower9734]

Hey man, loved the video. I gotta ask, though, where would you connect the 4 pin to 3 pin in an Optiplex 3010 motherboard? I can't seem to find it. Is it at the bottom?

[@PCTechHustle]

Can you elaborate more? Not sure what connectors you are referring to.

[@mr.hornblower9734]

@@PCTechHustle I meant the case fan connectors, but upon look at the manual it seems it has 3 pin connectors out of the box. I can just plug the connectors straight into the mobo since it has the 3 pins, right?

[@PCTechHustle]

Yeah if you have a spare 3 pin. My Optiplex 990 didn’t have any spare fan headers

[@memeO_8]

Do you know if you can do this with a 790?

[@PCTechHustle]

Sure can!

[@johnnygallardo76]

what do i do with the reset switch wire from the new pc tower?

[@PCTechHustle]

You don’t necessarily need it but hey check these out. I just recently discovered them and I just might make a video on using these. www.ebay.com/itm/Dell-Optiplex-7010-9010-7020-9020-and-Precision-T1700-Front-Panel-Header-Adapter-/264733441811?_trksid=p2349624.m46890.l49292

[@wnchatman]

Can you recommend any case that will work with the dell optiplex 3010 MT I honestly don’t care what it is I just want something that would be compatible with the 3010, THANKS!

[@PCTechHustle]

Just about any case is as it’s a standard micro atx motherboard. So I’d say go for whatever you like!

[@umberto46sletsplays]

Hi, can the CPU cooling fan be changed to a Better One? Or the Motherboard gives an error when it's not detecting the original cooling fan?

[@PCTechHustle]

You can change it for sure!

[@umberto46sletsplays]

@@PCTechHustle thanks :D are the connectors the same? I read somewhere that the pins are different from the standard CPU fan pins

[@PCTechHustle]

Yes the stock fan has a 5 pin on the motherboard but you can get an adapter. Let me find you one.

[@PCTechHustle]

Here you go! amzn.to/3k2sI0u

[@umberto46sletsplays]

@@PCTechHustle thank you, Is this the same? If i buy from Amazon US there Is shipping cost www.amazon.it/dp/B08CV8RG1F/ref=cm_sw_r_cp_apa_i_M6qwFb15EM1PH

[@mahmoooudesmael3606]

I hope to answer my question, is it possible for this device to be compatible with the new graphics card, RTX 3080 and 3070. Thank you.

[@PCTechHustle]

I would not recommend that. You would create a severe bottle neck on the CPU and wouldn’t not have pci-e 4.0 available either.

[@cytrus3427]

No, you would bottleneck, games would crash, stuttering every 0.5-2 seconds, and artifacting.

[@Sleepy335i]

Change cpu cooler I changed mine it gives it a great look

[@PCTechHustle]

For sure! But not needed if you are trying to keep it cheap! The CPU does not get very hot at all.

[@MobileDecay]

Lol! That case is overboard. 🤣

[@PCTechHustle]

It was! Hah!

[@leboeufcycles]

Hey I bought that usb 3.0 expansion card, my computer is all together it doesn’t have a operating system and I’m trying to install windows 10, I don’t think it’s reading through the expansion card

[@PCTechHustle]

Might try using usb 2.0 for now to get the OS installed

[@Hes2sthetic]

Optiplex 990 with the same SSD and I am using an RX 570. But I'm struggling on how I'm going to transfer it into a gaming case because I don't know where all the wires go and I'm not sure how to apply the mother board and the power supplies wires

[@PCTechHustle]

Maybe check out my original build video of this Optiplex, it might help you pinpoint where things go. However, stay tuned! I will have a full build tutorial style video coming as my next!

[@AdanSanchez5468]

I have a optiplex 390 as my first pc and changed my psu and gpu wanted to know if I could case swap

[@gritty-1290]

So if I were to put a fan controller everything would still work?

[@PCTechHustle]

Yeah that won’t hurt anything and give you better fan support / control.

[@MalcolmJames]

Can you just use a whole different motherboard or will it still be the same?

[@PCTechHustle]

You can. Then at that point I guess there wouldn’t be much of anything you are bringing over from a OEM like this.

[@MalcolmJames]

@@PCTechHustle good to know thanks for the quick answer :)

[@1973Hog]

While you were at it, I would have swapped out the blue 45 degree cable.

[@PCTechHustle]

I thought about it but you can't even see it. This case is going to be home for some different parts too, so didn't bother.

[@1973Hog]

PC Tech Hustle Gotcha. Keep up the good work. Following you now.

[@Lunacybeatz]

Can you do one with the dell optiplex 7010 MT but go more in depth with the wiring bcz i have no idea what to do

[@PCTechHustle]

7010 is the same process basically. Feel free to post a question though

[@Lunacybeatz]

@@PCTechHustle i just need a more in detail video of the back wires im new to this

[@PCTechHustle]

Gotcha! Maybe check out my step By step tutorial too, the processes are basically the same. kzbin.info/www/bejne/gpe6knV5iN-NbdU Hope that helps.

[@Lunacybeatz]

@@PCTechHustle thank you

[@Lunacybeatz]

@@PCTechHustle can that case be used also?

[@controllayt1046]

So can we get a SFF optiplex and can swap the case to a bigger one so I can fit the psu and gpu? Asking because here in Thailand they sell only SFF optiplex's, the normal ones are hard to find...

[@PCTechHustle]

Absolutely you can!

[@gonzaloneira3155]

Hello I have the same DELL computer that you have, with the same characteristics, but I want to pass the motherboard to a CORSAIR RGB ICUE 220T case, and therefore I wanted to ask you; Is there a possibility to do this? I would appreciate your answer and excuse my English

[@jasongames8620]

So the pci 6+2 on the power supply, does it connect to the motherboard or the GPU cause on my motherboard (optiplex 3010 sff model) doesn't have the pci 6+2

[@PCTechHustle]

Pci power would always connect to an add in card of some sorts, GPUs, etc.