Demonstrations on how to operate a Hydraulic Press Brake. Doing settings on the machine to form a radius shape on the metal plate and to bend the metal plate to form a square shape.
Пікірлер: 48
@mikeevans6589 Жыл бұрын
Always give mad respect to those brakemen using machines that are outdated.
@1714elijah11 ай бұрын
Very professional and informative. Thank you.
@MichaelSmith-sn8mr4 жыл бұрын
Amazing brother. Thank you for demonstrating that machine. You gave a good lesson on operating that particular machine.
@PreciousBoxer3 жыл бұрын
Good video. Very informative.
@bigbubba60324 жыл бұрын
we always used the roll former for arcs
@LansingLine2 ай бұрын
Cool video
@kawshalyakarunaratne9172 Жыл бұрын
Thank you
@yesmachineryservice1732 Жыл бұрын
what is the use of the regulator in the control panel
@PreciousBoxer3 жыл бұрын
We use use galvanized templates where I work. Cardboard templates are brought in sometimes, by customers, for single-use projects.
@gesongeorge3262 Жыл бұрын
Machine model?
@deathwrenchcustom4 жыл бұрын
"Alright Bob, we only have one more piece of material... so make this one count." 🤦🏽♂️🤣
@tworollersrollingmachineАй бұрын
where are u
@MrDirk002 жыл бұрын
Don't forget wear safety glasses.
@funone87162 жыл бұрын
Not sure that radius was even close to your template brotha
@rawvibes_821 Жыл бұрын
😊
@Onozitsthpopo4 жыл бұрын
3:31 wait a minute
@kysarie93123 жыл бұрын
🤣🤣🤣🤣
@armed_but_blind27683 жыл бұрын
Nice radius check
@therklegacy2293 ай бұрын
Look like he just learned
@jackfwoodward2 жыл бұрын
You know, most companies and businesses involved with CNC machinery would at the very least train you up in terms of setting dies and punches, the variety of metals used, the fine detail involved in terms of angle allowance (1 degree under/over tolerance for most), the use of callipers for metal thickness, bend lengths, checking angles with a protractor. Screw it, just eyeball it with a pencil and call it a day!
@funone87162 жыл бұрын
Hey it's probably a part for one of those African helicopters that doesn't fly. Close enough.
@jakearrow80472 жыл бұрын
@@funone8716 racist much
@funone87162 жыл бұрын
@@jakearrow8047 seen the helicopters Karen?
@jakearrow80472 жыл бұрын
@@funone8716 u clearly never seen anything
@MrDarknightkiller2 жыл бұрын
They had it scribed. Some one already did the measurements for it that why the piece came out as planned. This is an tutorial on the press break not the whole of machining
@chrystalblue71702 жыл бұрын
Wearing gloves while running machines are a great way to lose hands! Saw a few fingers and an arm come off from gloves getting stuck in machines and the people's hands got sucked in. Nope. I'll take the papercuts.
@petergay76292 жыл бұрын
Not wearing gloves is a rookie mistake. That's why you pay attention to what your doing and keep your hands away from moving objects 🤦♂️most that complain are why warehouses have saftey meetings
@aznation45922 жыл бұрын
I think wearing gloves is a must but those in this video are a bit big
@segov28606 ай бұрын
You must wear gloves, proceeds to show gloves that have never seen use and hugely oversized. Do we get much sharp edges in bending?
@glenncussick97814 жыл бұрын
🤦♂️
@deathwrenchcustom4 жыл бұрын
Bends "square shape," pulls it out, looks at it, doesn't change anything, hits it again. 🤷🏽♂️🤣
@kysarie93123 жыл бұрын
Was thinking the same thing!!
@brandonsaeger29363 жыл бұрын
You just gotta keep hitting it man, more foot than the last time!
@duramax782 жыл бұрын
@@kysarie9312 if you’ve ever ran a brake if you hit the same bend same set up you will get a little more bend, tween 2-3 degrees.
@MrDarknightkiller2 жыл бұрын
I'm a beginner at machining and I know that he hit the square bend twice cause it wasn't completely squared, you guys are hater because he perfectly bent the piece without an step back stop and he's black
@deathwrenchcustom2 жыл бұрын
@@MrDarknightkiller 😆 Seems like you're a beginner at a lot of things... but conveniently you already know everything so I won't bother educating you. Also, you're a racist piece of crap.
@pauldavis733410 ай бұрын
I’ve been running press break for 30 years and that guy looks like he doesn’t really know what he’s doing !
@jazmenriley87414 ай бұрын
I said the same thing my shop wouldn’t like him 🤣🤣
@OsomaBinWeldin4 жыл бұрын
You over bent it.... fix it
@engineering5911 Жыл бұрын
lol failed on the radius
@danmazur513 жыл бұрын
This is ridiculous! This guy doesn’t know anything about forming. First of all, you have to calculate what punch and die to use. Without going into all the steps that aren’t shown, at least he should be checking to make sure it fits the template ( not even close). Then he should at least check to be sure it’s 90 degrees!
@charleslangford60722 жыл бұрын
Looked 90(ish) to me. Maybe calm down and realise it's youtube? If you're so good why are you looking up beginners guides anyway?