Watching you work those dents out is very inspiring to back yard guys like myself 👍🏻
@ericcorse7 ай бұрын
I learned a new trick with that heat gun and iron pipe, it's getting there. Nice heat gun BTW industrial unit.
@ksduathlete7 ай бұрын
You are an artist . Is it weird for me to say I get a little sad when it’s over? Keep bringing us this great content . I learned a lot from you!
@jimford23387 ай бұрын
Great content ! Your definitely a wizard when it comes to body repair. Explaining it in such detail for us to understand and do it ourselves.👍
@jkimpala66517 ай бұрын
Beautiful. Shows how a bit of patience, elbow grease, and some ingenuity will pay off. Great work on those dents Mr Gibson.
@raymondtrotter46557 ай бұрын
Thank you Steve for another episode of how to. Great work as usual. I learn something every time i watch you. You improvise like me. Just think of a way to get it done. You made a comment on the door having bondo as we saw inside. That door i believe came from a Fleetside pickup that had trim. I was watching another video when yours popped up and came right to it. Thanks again for the lesson. Keep em coming. Blessings. Thanks. Truck Driver Ray ✝️
@keithbrann50867 ай бұрын
I'm so used to watching your excellent patch panel work but this episode was a real treat. I really enjoyed watching you work the dents out.
@dlandes147 ай бұрын
I think learning PDR would be one of the coolest skills to have and a great way to make some extra money on the side.
@jasonseal26927 ай бұрын
The happy hammer guy does it again. Awesome work as usual.
@biglon627 ай бұрын
Great work you are a very patience man! It takes it working on that old metal!
@chaidezrigo7 ай бұрын
I love your videos my friend.
@joeysamm7 ай бұрын
Great Job as always! Good to have you back...I've watch you vids for yrs super talented and great attention to detail 😎👍
@patrickchristie827 ай бұрын
Appreciate your work. Love seeing that old metal move around. Look forward to seeing how you tackle the tailgate
@azroadposer7 ай бұрын
The claw hammer is a sign of true craftsmanship 😊 👍
@jrmrencso87167 ай бұрын
Great video Steve, my 63 C30 panel has the same dents from no door check.
@MillCreekFabShop7 ай бұрын
Git' R Done, glad to see you back at it man.
@MrFireman1647 ай бұрын
Almost paintless dent repair, I see another side gig for you 😊
@UnconventionalMetal7 ай бұрын
Heat gun, that’s genius! Thanks for the tip
@DarrylzssDarrylG7 ай бұрын
Hi Steve. Good work. I'm going to try that heat trick.
@WesW31877 ай бұрын
I reckon I would weld the hole that was made by the stud puller. The one where you can see the filler coming through. You will only have grief in the future if you don’t. You’re doing a great job 🙂.
@Gibson63.7 ай бұрын
The filler you see in those holes were do years ago by someone this is where the side trim went. This is not the original door they do need to be welded in though
@staggersspecial42887 ай бұрын
Ingenious way to overcome that long dent with that bar with the rubber at the end of it. Great job on the other dent removals too.
@dustinsirrine2277 ай бұрын
With Heat and Hammer🔨you sure can get alot done and you being very patient helps. Seems the PO didn't have much patience. As always Brother Gibs it's looking great. May God continue to bless you, your Pops and family each day Brother Gibs. Keep On Trucking Brother Gibs👍...
@TheCrackerBox7 ай бұрын
Thanks for another , Brother !
@garagehack20607 ай бұрын
Thank you for videoing this. I needed it.
@Telephony9547 ай бұрын
ah yes the ol pipe n rubber baby bumper trick with thumb dolly bonus footage. well done, that sucker is gonna be straight with a little mud n sand paper.
@Slugg-O7 ай бұрын
Thanks! I've learned a lot from watching your videos, all of them. Probably the most important lesson I've learned is that slow and stead wins the race. I have a 74 C10 and have tried some minor dent repair that turned out pretty good, but would have been better if I hadn't gotten carried away and beat the hell out of it first. I've never seen it posted, but are you a body man by trade or is this something you picked up on your own?
@Gibson63.7 ай бұрын
I’m in construction work by trade never done body work before until I started working on these old trucks still a lot to learn
@Slugg-O7 ай бұрын
@@Gibson63. You're doing a great job for being self taught. Your other Chevys are top notch.
@rodmacisaac59637 ай бұрын
Thanks Steve! Nice work 👍😎
@ritchdad647 ай бұрын
Great work thanks for sharing 👍🏽👍🏽
@garylietz63057 ай бұрын
Good infomation....thanks.
@number7__8797 ай бұрын
Yes Sir!!!
@rynophiliac7 ай бұрын
that heat gun has a turbo!
@markgarcia47857 ай бұрын
Nice
@mironeko38207 ай бұрын
Magic hammer work
@joehuinker70097 ай бұрын
Steve do you own a palm nailer. You could make different inserts for the driver but might be too deep for inside the door
@Gibson63.7 ай бұрын
No, do not own a palm hammer afraid I would do damage with that
@richardhoutman52617 ай бұрын
Do what are you doing making a driver beater or full blow finished truck let us know.
@Gibson63.7 ай бұрын
I’m Not going all out with this truck just a driver hopefully get this engine running soon
@omarhusein32377 ай бұрын
Did anyone else see the face where the studs were
@adriantomlin29027 ай бұрын
Hey Steve,. could a guy used the heat gun on that driver's side upper door dent? 🤔
@Gibson63.7 ай бұрын
No I would not recommend that too much of a crease and dent