5 years later and you are still helping us folks...thank-you! I have two nice 1969 truck doors if anyone needs them. I bought them thinking they would fit my panel truck but they don't. :( I'm in Ohio.
@tremaynelee270211 ай бұрын
Thank you and I will continue helping and making new videos
@dickmick55174 жыл бұрын
Great video. Doesn't waste my time, right to the point. The best video on KZbin for this job. Thank you.
@TheCoupe064 жыл бұрын
Lord bless you, man! Without having found this video, I'd have STILL been pulling out what few strands I have left...
@gunnutmike5 жыл бұрын
I wouldn’t have been able to get this apart on my 70 without this video. Not knowing about that notch for the roller would have caused much cussing and frustration!Thanks.
@rickb85387 ай бұрын
The best tutorial on 67-72 window/door disassembly I have seen. I have taken many apart and it always seemed to be difficult, until now! Thanks.
@benlind36444 жыл бұрын
Look at you with that screwdriver + box end wrench trick! That just made my day!
@eddiegalvin12955 жыл бұрын
Great video. Restoring a 71 C10 stepside. Videos like this are getting me through it! Thanks!
@rogerstern2542 Жыл бұрын
Man did I need your channel. I’ve got 10 of these trucks. Just want to build a couple nice ones. The 67 thru 72 are pretty common in my area . Most are pretty ratted out, so you need a lot of parts trucks. I’m really in need of a short box for 67 c10. Get ready for a lot of questions
@corneliusmack8889 ай бұрын
Jesus clips... Absolute gold
@AnastasiaDohl373 жыл бұрын
Thank you so much! You have explained everything in such detail. It’s been helping me a “non experienced gall” on a project I just started
@culiacngmc74222 жыл бұрын
The best easy video. Thank you sir
@mjmarinara2 жыл бұрын
excellent video, just guided me to remove the hardware i needed out of a very crusty pair of doors with good glass and latches. lots of lube and a hand impact driver were a must! thanks!
@tremaynelee27022 жыл бұрын
Awesome I'm glad this was helpful. Thank you for watching
@whiterosemotors90264 жыл бұрын
Thank you for this video. Taking 67 c30 doors apart right now and this helps a lot.
@culiacngmc74222 жыл бұрын
Thank you this is the best video for 67-72 C10 c20 s doors
@destinationsanonymous26175 жыл бұрын
Awesome video, very detailed, shows every little thing, and little trick to take these apart. Came here after watching LMC's failure of a video that expects you to be a former chevy factory worker who already knows every single in and out. LMC fail. Tremaynes Trucks for the win!
@jneff10093 жыл бұрын
Good stuff, appreciate the time you took to share!
@rchamer84096 жыл бұрын
Great video showing the field stripping of a GM door.
@tremaynelee27023 жыл бұрын
Thank you
@yamahaxs65014 жыл бұрын
outstanding video! you made it look easy. I replaced all the latch mechanisms, but was scared of the windows. now I'm good to go!
@andersonbennett70784 жыл бұрын
Outstanding video... I wish they were all this well done.
@20alphabet2 жыл бұрын
You got a new subscriber 👍🏻😃
@Campbase12 жыл бұрын
Wow, I learned something about that screw driver. Thanks for the video.
@JULIO-mt8oq6 жыл бұрын
Thank you very much helped me out alot the person that build my truck put the old regualators on and the window would not roll down this helped me to do mine saved me alot of money was about to take it to a shop thanks again.
@MrSchrum6 жыл бұрын
Awesome first video man. Looking forward to future videos
@Nike44263 жыл бұрын
Thank you!
@uniballer655 жыл бұрын
Ty for both the videos you did on this. I did both sides on my 68.
@StuffYouShouldKnow_6 жыл бұрын
These are GOLD! Thank you a ton. Beer on me!
@nelsonsanfran5 жыл бұрын
10 minutes ! This would take me way more than 1 day.
@nfl2254fan694 жыл бұрын
Dang you're a beast! You knocked that out like it wasn't nothing...and I'm still scared of it..lol. Wish I had you as a neighbor..lol
@fasteddie94753 жыл бұрын
Nice job , thanks.
@thomasjennings53132 жыл бұрын
Thanks and well done!!
@dtsmw4 жыл бұрын
Great Video/job!, learned a lot, Thank You.
@CHsGarage16 жыл бұрын
Great video man both the channel and the Instagram are great keep up the good work
@chevytruckjerry4 жыл бұрын
Great video! Very helpful. Thanks!
@wadeverweire78105 жыл бұрын
Awesome video ! Thanks , helped us out .
@patrickpeterman48904 жыл бұрын
GREAT VIDEO MUCH APPRECIATED; PATRICK.P
@michaelsettle17894 жыл бұрын
good video, i did find that if i take out the door latch assembly and rods first you get a little more room
@josephk5blazer6234 жыл бұрын
Thank you Sir! This was very helpful!
@siegfredramos88676 жыл бұрын
Pretty straight forward wonderful demonstration video and funny guy too about the Jesus clip🤭😂
@uniballer655 жыл бұрын
Thanks. Both of mine failed within a month of each other. I replaced both sides in two hours. 1968 Chevy half ton C10.
@VideosByAl5 жыл бұрын
Thanks for the video , very helpful .
@eastxbbqman4 жыл бұрын
Bro you are amazing!!!
@smokin67886 жыл бұрын
Thank you sir. Helpful for sure.
@haroldlovett44525 жыл бұрын
Only one word, awesome.
@tensixtythreevideo5 жыл бұрын
Hey thanks for sharing that was very helpful
@rexburn19555 жыл бұрын
Great video! Thanks!
@markedgar60173 жыл бұрын
Great video. I was very overwhelmed by this due to lack of room to maneuver. You absolutely made it easy to understand.
@projectinlinesix5 жыл бұрын
Well done! Thank you!
@ronbuchhold79022 жыл бұрын
awesome thanks man nice truck in the video
@tremaynelee27022 жыл бұрын
You are welcome. Ol Greenie was one of my favorite trucks
@concordance53874 жыл бұрын
Thanks so much. Well done.
@kenmontgomery21873 жыл бұрын
Very very well done video! Didn’t have to hear about a bunch of shit that doesn’t pertain to the dissembling of a 67-72 C- SERIES. Pickup! Don’t mean to sound like an Ass, it’s just the other day I watched a 20 minute video with 20seconds of actual usable information! Pertaining to a 700r4. But I left there knowing his assistant doesn’t put his thins/tools back where he found them! His sister is married to this man and they are currently trying to have a baby or was it trying to have a divorce cause he doesn’t put anything back!…. but ok enough. You get the poing
@hughmallany3606 жыл бұрын
great video...thanks
@douglaspell37643 жыл бұрын
Thank you sir very good!
@CaliforniaClassicCar6 жыл бұрын
Awesomeness
@chevyengine307 Жыл бұрын
I always put grease on those bottom bolts
@jlmullikin6 жыл бұрын
I replaced the hinge pins and bushings. I have a very slight vertical movement in the hinge. Is that acceptable or a no go? Thanks
@recruit_life0715 Жыл бұрын
I don't know what im missing here but my glass won't come out.
@signkutter92184 жыл бұрын
How do you take out the felt inserts in the window channel?
@robertschmidt14043 жыл бұрын
So more than likely this would be the problem I am having with my 1971 C10 why my both of my windows dont go down? Cool video.
@tycole46536 жыл бұрын
Where can I find hose screws and how do I thread them in
@NewBeginningNewCreation3 жыл бұрын
Will this work if the window is stuck up?
@drewkastelic61544 жыл бұрын
Done that a time or two from the looks of it.
@kristonpohlman26855 жыл бұрын
Thank you C10 GOD.....BadAss….. Can you do one for the drive shaft lengths and carrier? 350/400
@LJSJIUJITSU4 жыл бұрын
That last part you removed!! Can that be removed by itself to swap to another door?
@dalton3c3 жыл бұрын
I gotta do all that to replace the side mirror??
@Ill236 жыл бұрын
Thank you, just cut my time in half I'm sure.
@henrydixon31593 жыл бұрын
I cant get my window to come down where should I start?
@mrmidnight324 жыл бұрын
What’s that gasket attached to the glass and the window regulator slide holding the glass at 6:35... I broke my driver glass and my gasket holding the window it self in the rail is dry rotted. Need to order a replacement but can’t find what gasket or part number that is. Didn’t come with the gasket kit I ordered either.
@scottmckesson40224 жыл бұрын
It's called glass setting tape. The Car and Truck shop has it for 50 cents a foot. Depends on the thickness of your window, but I recall mine fit snug with .047 thickness. Thicker was impossible to get the window in the track. Some local glass shops also carry it. Buy a few thicknesses and try it em out, it's cheap.
@mrmidnight324 жыл бұрын
Scott McKesson appreciate the reply, finally found and got some last week. But yea I got a roll of glass setting tape from TC&TS
@brianswimmer3 жыл бұрын
I was just wondering where that damn jesus clip went....
@cindycrenshaw9626 Жыл бұрын
What if the door wont open, both of my doors on 72 truck will not work. Windows are open. And door is unlocked
@tremaynelee2702 Жыл бұрын
Most likely the latch is stuck. Try to spray some lubricant on the latch if possible, maybe from the window opening down, and have someone tugging on the handle while you push the door from the inside. Be careful not to push in the middle of the door or kick it because it will dent, push at the back of the door. I give them a few good shoilder hits. Once you get it open remove the latch, clean and lubricate it. I recommend WD 40 Gel Lube
@user-dg6um6bu8m4 ай бұрын
At what point do you put on the felts
@tremaynelee27024 ай бұрын
Window run channel then felts and scrapers after everything else is assembled.
@joelmasi8923 жыл бұрын
So there are no “Jesus” clips on my door handles... any help? I’m assuming not original handles? Anyone?
@TheLoobis3 жыл бұрын
0:30 Well, what the hell is that tool called?
@tremaynelee27023 жыл бұрын
Door handle clip tool maybe? Most auto parts store have them in the HELP section