Fiber post cementation

[@Mohamed.Ahmed4]

1. The post is cleaned with a cotton soaked in alcohol. 2. Silane (e.g. Silane Bond Enhancer, PULPDENT) is applied, followed by gentle air jets for volatilization of solvent. 3. The post is coated with the adhesive (Single Bond Universal Adhesive, 3M), and the solvent is volatilized with gentle air jets. 4. Light curing for 40 seconds after excess adhesive removal using air jets. 5. Now, the post is prepared and ready for cementation. Store it until the tooth surface is prepared. 6. Rubber dam isolation. 7. Root canal preparation using the suitable drills. 8. Clean the canal. 9. The acid is applied at the depth of the canal. The conditioning is extended over the entire surface. 10. Rinse copiously, and ensure that the root canal is completely absent of acid remnants. 11. Excess moisture is removed with gentle air jets and absorbent paper points. 12. The adhesive is applied on the tooth surface using a microbrush. 13. Use a microbrush of a smaller size to reach the canal depth. 14. Solvent is volatilized with gentle air jets. 15. Excess adhesive is removed with absorbent paper points and a dry microbrush, then solvent is volatilized with gentle air jets. 16. Light curing for 40 seconds. 17. Dual-cured resin cement (e.g. MultiCore® Flow, Ivoclar Vivadent) is manipulated, and applied on canal surface by means of a syringe. 18. The canal is properly filled with the cement. Start at canal depth to avoid bubbles. 19. The post is inserted into position and subjected to digital pressure until it reaches its predetermined height. Do this very quickly to avoid polymerization of the cement as it can prevent post insertion to the full length. 20. Remove excess unpolymerized cement, then light cure. 21. Construct the core build-up by the technique you prefer. 22. Cut the excess of the post, and finish the restoration.

[@simohamededdraouii529]

Thank you bro

[@Mohamed.Ahmed4]

@@simohamededdraouii529 You are welcome

[@Abcdfj127]

U are a life saver thank uuu

[@Mohamed.Ahmed4]

@rawan3163 This is kind of you. Glad to help

[@BeyondDentistry]

Nice! Two posts in the premolar is the way to do it. Great channel.

[@WellsDentalDelights]

Thank you for making and posting this video! I hope you can make sickle and curet videos in the near future! :D

[@drahmedel-maghrabi3947]

Nice detailed video ❤️

[@mohamedosamaabdelhay7961]

Magnificent 😍👏🏻

[@lincolnoliveira3041]

Faber castel

[@khaledhelaly7710]

ماشاء الله ... تسلم ايدك يادكتور

[@ahmedbadr9811]

تسلم ايدك يادكترة استاذنك تفعل خاصية الاوف لاين داونلود ع اليوتيوب عشان انت عارف النت في مصر صعب فبنزله اوفلاين على اليوتيوب وبعدين بنتفرج عليه

[@DenMnd]

تقدر تنسخ الرابط وتلصقه في أي موقع تحميل من اليوتيوب مثل يوتيوب ميت أو يوتيوب داونلودر

[@kerm7357]

Ğ

[@mylifeilove9589]

عالمي طول مابتدي طاقة رايقة لبتوع الاندو 😂😂😂

[@hasti5932]

Is this possible not to cure the bonding in the canal?

[@omarelshami9]

تسلم ايدك ي دكترة ❤️

[@mohamedreda2941]

مبدع كالعاده ربنا يباركلك 👌👌👌

[@OatsmartTG]

Would you mind telling me how you clean the cement out from the variolink esthetic syringe?

[@abdelrahman8712]

Why you didn’t etch the fiber post? Also, it’s better to use chemical bond in the canals.

[@DepesHrepes]

“All the crazy shit I did tonight”, that’s very self-critical...

[@prettysavage2203]

Epic 😅

[@diaanour8081]

Between sialine and bond Just using air tou remove excc of sialine Or using water

[@tareksaad2569]

Only air

[@drshwetaprostho6301]

Nice !

[@kmh9460]

ممكن طريقه للتواصل مع الدكتور او مكان عيادته

[@mayaadam1036]

Thank you doctor.

[@moatazelsheikhh]

what is the bur after the drill doctor and what is it's use for?

[@delliot96]

Most likely a Peeso Reamer for shaping of canal for the fibre post, size probably #00 or #0

[@osmanberathamurcu]

can we use dual cure glass ionomer instead?

[@haithammohamed7925]

Yes you can

[@ЭрдэмЦыбенов-з5ш]

Me: watching this video Also me: eating ice cream

[@harris5haris]

Great

[@drmustafa_tareq8057]

You can add pin or scroo to elevate the teeth

[@mohamedsamir9062]

تسلم ايدك 💜

[@Rahulus_]

Why is the filling so transparent?

[@د.محمدعلي-و4ح]

👏👏😍😍

[@mahetabmahmoud9555]

Thanks

[@amrmagdy8741]

تسلم ايديك

[@Cornholio312]

just deadly ruined cervical dentine and high chance of a strip root perforation with that type of burs.

[@lincolnoliveira3041]

Perharbor

[@ibrahimsadek150]

Why two posts!! That weaken the root!!