HOW The MJX HyperGo 10208 SHOULD HAVE Been Made (Almost)

[@crlewww30]

dude I am living vicariously through you in this hobby lol a shop full of RCs is definitely my dream

[@DerbyCityRC]

Nice! You’ll get there!! 😊😃

[@PRESTINERCs]

​@DerbyCityRC Hey man, where can I get those badlands? Or what size are they? Thanks in advance! Love your channel BTW!!

[@DerbyCityRC]

@PRESTINERCs these here man! Thanks! amzn.to/4ibcQaX

[@cypherzz-_-5804]

Thank you for the update on the truck. I canceled my order because they do need wider arms to make this better.

[@DerbyCityRC]

You’re welcome and I agree! I highly doubt this next one will have wider arms, but hopefully…the next-next one supposedly due out in a few months will!

[@djmandrick]

Loving the regular uploads and all these "how to make it better" videos. Easily become one of my favourite RC channels, full of info and breakdown advice and tips as we go. Well done and keep 'em coming, you're doing great. (More Plushy-alien in there as pls, as random cameos please. Makes me laugh everytime he pops up).

[@DerbyCityRC]

Thanks! 😊 Mr Alien Bro certainly hasn’t left. I never really know where he ventures off to. He just shows up unannounced at the worst times! 😉👽

[@Hungrybird474]

@@DerbyCityRCyeah these are interesting vids .

[@DerbyCityRC]

Thanks!

[@RCRoads]

Great job as always. It seems like you have reviewed hundreds of cars over the years. So much variety on you channel. Awesome ! 🏆

[@DerbyCityRC]

Thanks!! 😊 🤜💥🤛

[@jagergerg9771]

Really enjoy the Frankenstein videos. It’s not a bad little truck but I definitely agree on making it a bit wider

[@DerbyCityRC]

Yup 💯!! Thanks!

[@pjpankratz8829]

Hope MJX takes your input in to consideration for a V2/3. Great video as always.

[@DerbyCityRC]

Mine and others for sure! Heck at this rate we might have a V7 by winter 😂 Thanks!

[@richiesavino9653]

Excellent video as always man. The effort you put out to make these cars and videos awesome is amazing. This thing seems durable and I’m excited to see future versions and videos 🤘

[@DerbyCityRC]

Really appreciate that man! I’m excited to see the next ones too!!

[@michaeldorich4485]

It's interesting to see all the changes you made and how the truck improved. Good work. I think the fact the radio was so bad is one of the most surprising things about it. It will be interesting to see how much the next version changes.

[@DerbyCityRC]

Ya that radio is terrible. Lol. Hopefully that and the other mentions will be included in one of the next versions. Thanks!

[@Schmidteren]

love your videos dude. probably my favorite rc content creator. you have so much charisma, and your videomaking end editing skills are on point. :D I bought an xs flux, since it's only what would be 231 dollars in my country, so I jumped on it, and loving it so far. :D

[@DerbyCityRC]

Dude I appreciate that so much!! Awesome deal on that flux! Nice!!!

[@wadevallbona5314]

This is still a nice truck. Hopefully the new one will be beast mode. Awesome video as usual

[@DerbyCityRC]

I agree. Hopefully!!! Thanks!!!

[@mnakash77]

I think for the self righting and for standing backflips you are suppose to be with willlie bar off. Thanks for the update. looks like a beast now.

[@DerbyCityRC]

Possibly! It did work in the grass though 😃 you’re welcome!! 😊

[@3DMOFO2020]

Fantastic job on the mods Nate hopefully MJX will see this video to see exactly what this 1/10 scale truck needs to make it handle a whole better?👍😎👍

[@DerbyCityRC]

They’ll definitely see it along with all the other videos! Hopefully they have time to do all this for the next-next version! Lol

[@3DMOFO2020]

@@DerbyCityRC Keep your fingers crossed Nate? 😂

[@DerbyCityRC]

Definitely 😂

[@3DMOFO2020]

@@DerbyCityRC BTW May I wish you and your Happy and safe 4TH OF JULY😁

[@DerbyCityRC]

@3DMOFO2020 thanks bro and you too!! 💥

[@Multi-Skill-Bill]

Looks way better than before. And you are right, it needs to be wider. Hang tough, this winter you will get version 5 and it will be awesome! 🤣🤣🤣🤣🤣🤣🤣

[@peteralbury7724]

@@Multi-Skill-Bill Amen to that Bill

[@DerbyCityRC]

I was thinking version 7 by winter with an announcement for 9 😂

[@Multi-Skill-Bill]

@@DerbyCityRC rofl! 🤣🤣

[@DerbyCityRC]

😂😂

[@Multi-Skill-Bill]

@@DerbyCityRC you sure? version 9? HAHAHA 🤣🤣🤣🤣

[@nastynate736]

bro like i have said 30times that boat is by far the baddest rc boat on the market the color the sound the speed is mind blowing love it bill

[@Nerm78]

Great video as always! Question...do you sit around just thinking of what parts you can take off one car and put on a completely different one? You should start a 2nd KZbin channel and do that on full size cars! I want F350 wheels and tires on my 1989 Ranger!

[@DerbyCityRC]

Haha! If there’s something specific I want to do to one I do 😂 I do actually have plans for a second channel with “different” types of projects. Some RC related and some not. Just gotta figure it out more lol

[@snuzum06]

I preordered this after I watched your first video and they emailed me yesterday that I will be getting a revised version 1. So V1.5 I guess? Including tighter shell to prevent clipless body from popping off, adjusted diff screw glue, reinforced chassis, and fine tuning the parts that wiggle with excessive play. Should be available in July. Then V2 will be available in October. They gave me the option to accept V1.5 or wait for V2.

[@DerbyCityRC]

Oh cool that’s awesome!! I’m inclined to say wait for the v2 but as far as I know we don’t know what that version will consist of. Hopefully many more things that we’ve all mentioned in the videos.

[@snuzum06]

Hahaha I commented this before the end of your video. Silly me.🤣

[@DerbyCityRC]

lol all good!! Where did you pre order? The one I preordered didn’t give me an option but it supposedly shipped yesterday lol and of course it’s cheaper now!

[@snuzum06]

Makerfire is where I ordered.

[@DerbyCityRC]

@@snuzum06 cool! Ya I was hoping to cancel mine yesterday and order from them but I got the “shipped” notification from hypergorccars.com too late. Makerfire does seem like one of the best places to order this from.

[@L2theWcarscoffeelife]

Did you open the front and rear diffs? If so did they have the red loctite too? I broke the pin holding the sun gear and damn I had to torch and use a stripped screw remover to drive them out then the center brace forget it I just broke the head off drilled it and used the screw remover they went crazy with thread locker for sure the chassis depends on that brace I tried to drive with the screw loose and the center drive shaft spit out lol

[@DerbyCityRC]

Yes I did. No the front and rears were easy, they have plastic housings so no loctite. No issues with those from what I remember. Ya that metal rod is what keeps this thing semi rigid 😂

[@aliasangelalias]

Very nice run!!! Keep up with the videos! Good job!

[@DerbyCityRC]

Thanks so much man!!

[@Fast_Lane_RC]

They should ask you for engineer opinion to use in mjx drawboard 😊 nice ideas and amazing videos, you are killing it my friend.👍

[@DerbyCityRC]

Thanks 😊 😄

[@BirkinZero7]

Up to 18k subs! Awesome work.

[@DerbyCityRC]

Yes! Thanks man!! 😊

[@lyricofwise6894]

Very informative of the Rc!

[@DerbyCityRC]

Thanks!!

[@ronswitzer6057]

I also had this ordered from Makerfire, I also canceled and asked when V2 would be available. I was told October

[@DerbyCityRC]

That’s what it’s looking like. I have the “between” version coming soon as well and then hopefully the actual v2 in October.

[@ronswitzer6057]

@@DerbyCityRC I had ordered it for my son’s birthday, but after watching I will wait for V2 for myself 😂 I ended up getting him the Kraton 4s. Look forward for the video on the I guess we will call it V 1.5 👍🏻 Keep the awesome videos coming man!! My boys and I love em!! 🤘🏻

[@DerbyCityRC]

@ronswitzer6057 nice! I’ve got the outcast 4s and love it! Hopefully they’ve got this right nailed down in these next two versions! lol

[@ronswitzer6057]

@@DerbyCityRC hope so because the truck looks really promising 🤞🏻

[@DerbyCityRC]

@ronswitzer6057 I agree!

[@Powerserg-dx5kk]

Hi love your videos I just bought the v2 what upgrade would you do to the shocks I just broke a shock mount really don't like the plastic I'm just not sure what's fits in the truck could you please help

[@DerbyCityRC]

The plastics are a bit soft on these trucks. As fas as shocks go, the granite shocks I tried in this video did really well. Haven't tried them on the v2 as it doesn't need them as bad. I think I saw AliExpress has some metal upgrades for these trucks. Shock towers may be one of them.

[@rogueFactor]

"The Far Right Hole" needs to be a t-shirt. bahaha

[@DerbyCityRC]

Haha!! That would be a good one!!

[@alexsandoval9743]

I see what rlaarlo meant when they said they aren’t worried about this one… too many things that need improvement unlike the Omni terminator.. which just needs fluid and thread lock to be bashed around hard, steering and suspension are perfect out the box

[@DerbyCityRC]

I get it too. This one does have the size and power though. This one has too much loctite and Omni didn’t use enough lol

[@sayong1989]

Hi, Is the rear arm the same as the front arm? Can list a part change please..

[@DerbyCityRC]

Yes the front and rear arms look the same

[@feverexplosion1968]

where can I buy the angry snail 4s? I don’t have or know how to soldier

[@todd5060]

They have a long way to go yet with this rig

[@DerbyCityRC]

Let’s see how the next model looks! I think they’ll get it eventually.

[@markgrochowski7934]

Another excellent video! I was wondering, how do you decide which manufacturer parts will fit? You chose Arrma for this video, but would Traxxas or Associated parts work? Thank you!

[@DerbyCityRC]

Thanks! Really it was looking at what I have on hand and then physically testing it if it looked close lol there’s probably something out there somewhere that would make this work.

[@jasonh8470]

Do you have a double wide backyard or just really cool neighbors?

[@DerbyCityRC]

It’s ours. It’s about a 1/2 acre. Was pretty much one of the prerequisites when we were looking for houses lol I wouldn’t even go look at houses with smaller yards than 1/2. Wanted more but the search took way too long.

[@CK4RC]

Double B's! I love that. How many trucks did you cannibalize to try to improve this one though?? haha

[@DerbyCityRC]

😂 I had 4 cars atleast partially taken apart at one time lol. All back together now except for the redcat. Just need to reinstall the axles lol

[@Hungrybird474]

I ordered a ski slope ramp like that one finally .

[@DerbyCityRC]

Sweet! If it’s the same one I have make sure to get the reinforcement kit! Mine is starting to lean and waiting for that kit to come in.

[@bradsrcsmore3848]

Very cool video! Your version worked out 😁 Now lets see if theirs does 😉

[@DerbyCityRC]

Thanks!! I sure hope so!! 😃

[@STRIMIX]

I find the transmitter really bad, do you know what amount of channels the orignal receiver has? I might want to change it out aswell. Also, What exactly did you change on the shocks? I couldnt quite make that out.

[@DerbyCityRC]

Ya the receiver blows! I think it’s 3 channels. I reused the little metal eyelets that came on the shocks of the 10208, instead of the plastic ones that come in the arrma shocks.

[@STRIMIX]

@@DerbyCityRC Mine is getting stuck aswell now, the trigger. How can i switch the reciever and still maintain the option for 75% / 100% speed. I like it on 75% when i'm racing but i don't know how this stuff works if i install a new reciever and transmitter.

[@RC-Closer1313]

I knew you would make a great video out of this mess 🤙🏻… man, if you could have gotten that “wide kit” together… would have been even cooler

[@DerbyCityRC]

And what a mess it is but I believe it will soon be cleared up! Dude I tried sooo hard 😂. Literally probably for like 4 hours to try to make that work! Hopefully mjx just does it!!

[@aknmtbr]

You going to be reviewing any Arma groms? I'm really tempted to get a Mojave grom.

[@DerbyCityRC]

Definitely interested in the MoGro, but probably gonna wait for the Kraton or outcast!

[@marielapineda8460]

I love you content thanks for your hard work in every video ! I have a granite 1/10 i want bigger tires which ones you recommend?

[@DerbyCityRC]

Thanks!! 😊 so the exact tires I used on this video are what most people recommend for the granite. I haven’t tried yet, but they do come with the adapter to fit the granite. Technically they’re the same size but they sit slightly taller because the tread is thicker. I have not tried any that are bigger. It’s these bad dudes right here: amzn.to/3L91EfT

[@marielapineda8460]

@@DerbyCityRC thank you !

[@qzf809]

Hi mate can I ask you what mod and pitch is the pinion gear for this truck I can't find any information about it. Please respond thank you

[@DerbyCityRC]

Hmm. I can’t remember or never knew. However I have the new version 2 video coming up in a couple weeks that I will try to find out on.

[@qzf809]

@@DerbyCityRC thank you brother I love your content btw.

[@DerbyCityRC]

@qzf809 you’re welcome and thanks!! 😊

[@williamcabello2142]

Your good at what u do cuz of your videos cant go wrong bye thes reg thanks for your videos 😊

[@DerbyCityRC]

Thanks dude! 😄

[@ArnoldKrT]

We wanna see v2 😢 please ❤ you'r review it's the best🎉

[@DerbyCityRC]

Working on it 😃

[@WombleRCmodelsandhobbies]

Nice job . 👍

[@DerbyCityRC]

Thanks!!

[@eXpire163]

Short question, everbody shows how fast they can go. Could you show how slow they can go? I would like to have a fun car that could also tow my rc boat to the lake close by on a small trailer

[@DerbyCityRC]

All these cars can go extremely slow, like barely moving if you just barely pull the trigger. But I’ll try to mention more which ones can be slowed down heavily even if you pull the trigger fully.

[@niz76]

That center diff looks almost identical to the Associated Pro4 SCT (and MT10) which nobody makes a metal spur gear for. Hmmm....

[@DerbyCityRC]

Might have to check it out 😂

[@BlessingsNFaith]

I hope to see more videos on this car I might just buy one 😂

[@DerbyCityRC]

Probably not until the V2 version is finally out lol, but you never know 😅

[@feverexplosion1968]

what battery are you using in that

[@DerbyCityRC]

For this run I’m almost positive I used the stock Angry Snail/MJX battery, which so far seem quite decent I also may have used a CNHL with an adapter. I used both in this car quite a bit. This cnhl battery: amzn.to/4cUzzVO

[@feverexplosion1968]

where can I buy the angry snail 4s? I don’t have or know how to soldier

[@DerbyCityRC]

@feverexplosion1968 I just tried to find it and only place I saw besides Ali express was Makerfire but it’s on pre order. Plus it’s the same cost as two of the cnhls lol. I’d get the cnhls I linked and these adapters. No soldering necessary:amzn.to/4dfbys7

[@feverexplosion1968]

Thank you

[@janklaassen6404]

Could you do a speedtest with the 15T pinion please? I think it's 47mph on the stock 12T.

[@DerbyCityRC]

Yup it was 47 on the 12t pinion on 4s. I almost did a speed test this time but that squirrelly rear end kinda made me not do it. One of the possible upgrades for this next version are tighter tolerances that may improve that, so I may do it on the next version I review. Depends on how it all unfolds. My guess with that pinion and bigger tires it would be atleast 5mph faster.

[@janklaassen6404]

@@DerbyCityRC Ah, yes, I forgot about the rear instability. My bad. Top speed might be over 60mph :) 15/12*47=59 plus bigger tires.

[@DerbyCityRC]

@janklaassen6404 I don’t know the math. So that’s cool!! I’ll definitely do it eventually. Maybe with the v2…if/when!

[@jlrguy2702]

What wheels did you put on this?

[@DerbyCityRC]

These bad chickens right here: amzn.to/3LCrER1

[@jlrguy2702]

@@DerbyCityRC Awesome thank you :)

[@peteralbury7724]

DC RC SURGERY 😮

[@DerbyCityRC]

We tried! 😕

[@peteralbury7724]

@@DerbyCityRC And we all appreciate that. Keep tinkering till we figure this dang thing out. And I enjoy the process while we all learn something 😀

[@DerbyCityRC]

Me too! 😆😃

[@alanlocklear4951]

This thing reminds me of the traxxas hossmore than any other truck everyone has compared it too

[@DerbyCityRC]

Nice! I don’t have one so I wouldn’t know!

[@HallOfFamer330]

I have a red 1/14 with two 3s square batteries... Never have had these before. Never used em since I got them yet. The car came, with tons of extras. The aluminum they offer factory is great..!!! I'm gonna have to wide the car with the slash 1/10 carbon fiber and aluminum red.. because it's already aluminum. I hope it turns out nice. I have rlarrlo 1/14 aluminum needs one left steering arm. I'll donate to the rc cause anytime...!!!

[@DerbyCityRC]

Super cool!!

[@kontrakgaming4107]

At this point you should be mix official reviewer!!!

[@DerbyCityRC]

😆 🤘

[@djricknz]

Hey bro I’m looking at buying one of these mjx car for bashing and stuff. Which one would you recomend

[@DerbyCityRC]

Well more than likely this will end up being my favorite MJX model. For size and better stability over all their other models.

[@travisbergen2223]

I was broke and broke a dog bone so I ended up modifying a screwdriver shaft and it works like a champ 😂

[@DerbyCityRC]

Haha! That’s awesome! Did you use a welder to modify the screwdriver shaft?

[@travisbergen2223]

I used a dreamer some clips and solder I wish I had a welder 😂

[@datN.O.Colombiano]

Thats look amazing.

[@DerbyCityRC]

Thanks!

[@Gamebit450]

MJX left a bad taste in my mouth after the 14210 I got ugh just the worst lol! Great video ....no dancing but still good video lol!

[@DerbyCityRC]

Yaaaa… is it the unstable-ness? Try any different tires? My widening solution? 😅 Yup I didn’t see any goblins this time around 😂

[@Gamebit450]

@@DerbyCityRC More handling its just so dang squirrely. I widened, diff servo, suspension work, new controller and receiver and still just can not stand how it drives. Got the Omni Terminator carbon version and LOVE IT! Handles night and day difference!

[@DerbyCityRC]

@Gamebit450 oh ya man the OT is one heck of a car. Nothing else like it smaller than a 1/10 that I’ve ever had!

[@MrSjirafje]

I have mixed feelings about the updated versions that may or may not come. One one hand it's good that they improve their cars on the other hand it makes me hesitant to buy one (will you get the latest version? Is there a new version coming soon?).

[@DerbyCityRC]

I definitely get it. I touched on that in the end of the video as I got a what is hopefully an official update just yesterday. Looks like an updated V1 on a few weeks and an actual V2 in a few months. So ya I wouldn’t buy it yet.

[@baehoeta3693]

So how come currently looking at this model online I’ve looked at 2 sources they both say 2s-3s capable? I thought it was 3s-4s?

[@DerbyCityRC]

That’s weird and maybe a typo. What sources? It’s definitely 3s-4s

[@baehoeta3693]

@@DerbyCityRC so I check a third source as well and same thing 2s-3s, first source aliexpress, second makerfire, and third best buy boxes. Let me know what you think and also love your videos and how you go through the cars! Keep it up man!

[@DerbyCityRC]

@baehoeta3693 I’m actually about to make a post about this car. I received the “newer enhanced version 1” and it’s the exact same thing that I already reviewed. Me and my Makerfire rep are both confused because he got the info directly from MJX. I think that the version I (and many others) already reviewed (and then put the longer shocks on) was already this enhanced version but no one knew that. MJX knows 4s causes a hot motor (which is typical really) and that it causes the tires to blow, so they maybe changed it to 3s on the listing for that reason, but they did not change the speed. 4s is what got me just about 80kmh which is now what their listing says 3s does (it doesn’t). Hopefully it’s a mistake because if not that’s way off and they should know better. Maybe with a 15t pinion but I haven’t tried yet. I was running it on 3s in the yard again today and man it’s still a good truck, but this lack of communication or organization is annoying and not right. The new mjx crawler I just reviewed was epic and practically perfect the way it is. Not sure why they didn’t wait to refine this car better before release like they did with the crawler.

[@baehoeta3693]

@@DerbyCityRC sounds good thank you for the solid information looking forward for the next video!

[@Tattoosandtoys]

Good job man. I always thought this truck just needs to be a little higher a little wider and a little fast. Just a few changes and I think ur thinking the right direction. Bash brake repeat!!!!!! Fuck it up. Lol😂😂

[@DerbyCityRC]

Thanks! I completely agree! 😆

[@PeterAlbury-b4l]

Ok! The factory v2 should be out by now. Wasup with that?

[@DerbyCityRC]

Supposed to be later this month. Woohoo! I believe I have one coming. Hopefully it’s good!

[@PeterAlbury-b4l]

@@DerbyCityRC I'm jonessin to see it

[@captaincouldverc]

Those arms and center diff sure look similar to another 10 scale truck. I need to find that spur gear. Insert evil laughter.

[@DerbyCityRC]

They’re almost identical lol. They would 100% fit but it uses the same ones for the rear. 😂 not sure if that sour would work out not.

[@angkorpeck]

They definitely need to lower the price on this one to maybe $220ish because it looks like the tires are too thin and have to be swapped out immediately.

[@DerbyCityRC]

Well hopefully the new version has better tires! I think $250-$260 is decent which is where it seems it will be for now, but definitely still some concerns.

[@BobbyS-dg3zl]

AYY NEW VID ❤

[@DerbyCityRC]

Yea bro!!! 🤜💥🤛

[@BobbyS-dg3zl]

@@DerbyCityRC 🗣️💪💪

[@stefan-norge]

Great work from your side. Now mjx has to top your version…

[@DerbyCityRC]

I truly hope they do!! Really won’t take much honestly lol

[@DoRC]

Looks good :-)

[@DerbyCityRC]

Thanks man! 😊

[@politie_jip112]

its a lot better but still not worth it in my eyes upgrading cars to make them good makes them also more expensive i still pick arrma granite or outcast v2.5

[@DerbyCityRC]

Yup. This was mostly for fun but still hopeful about these next versions. Outcast 2.5 beats everything!

[@politie_jip112]

@@DerbyCityRC treu but if they get upgrades out of the factory they will probably increase in price a way to make the outcast v2.5 get better stearing is by fitting the losi lmt servo saver i will place 1 soon my outcast does your outcast run hot?

[@DerbyCityRC]

@politie_jip112 hopefully it won’t run up the price as price has big one of the biggest criticisms so far. I haven’t run my outcast for a few months so I can’t remember for sure. That lost servo saver sounds like a good idea!

[@politie_jip112]

@@DerbyCityRC i suggest watching a video how to install it you'll need longer screws and 6mm on both sides for servo spacers i just cut into my mjx parts car for the spacers

[@DerbyCityRC]

@politie_jip112 sweet. I appreciate it!

[@СлавкаТарасов-п9ю]

Mjx 10208 or jlb cheetah?

[@DerbyCityRC]

Oh 10208 easy. The cheetah is garbage. Faster and an absolute animal, but it’s fragile as can be. I have a cheetah roller and lots of spare parts for sale if you’re interested 😂

[@brianbiro9094]

Ordered 1 bout a week ago ,said it was version 1.2 hope it's got the Upgrades 🤞💯%😕👊👍✌️🦅👨‍🦼🇺🇸

[@TheMitsosBlog]

So to make o long story sort buy an Arrma Granite. 😁😁😁😁

[@DerbyCityRC]

Haha! I mean ya for now. This has that center diff though and may turn out to be more durable. So it still kinda depends plus they have some refined versions coming so we will see! 😅

[@jestajones]

Mmmm this one is a pass for me, the way you talk about the old hyper go made me think about adding it to the collection, I was interested in this new one but after seeing this I’ll wait to see your review of the V2 and see how that turns out..

[@DerbyCityRC]

Ya I’m definitely hoping for a solid v2!!

[@TheJohneldridge]

But we all know if they make them perfect out the box we’d have nothing to upgrade 🤷🏻‍♂️

[@DerbyCityRC]

That sounds lame!! 😆

[@dab_bod3520]

Drive it on the trampoline? Both my bashers cut off before I make a full circle on my daughter's. Guessing it's from static?

[@DerbyCityRC]

Never tried. Thats interesting though I guess it could be.

[@JP-qq2kn]

I dont understand why companies like mjx dont just buy an xmaxx or kraton (or whatever the best thing is at the time) and copy it just enough to not get sued. And dont use cheap plastic either. Use the good stuff.

[@DerbyCityRC]

I think they do sorta do that. Lol They got a lot of inspiration from the granite AND the MT10 here. The trade off to the flexing plastics is more durability for crashes. Which we’ve seen a lot of crashes across several channels now and very few breaks so it works, but ya... It’s a trade off. I swear I think rlaarlo got it right with the Omni terminator. The plastic is solid yet it still can flex under extreme loads.

[@JP-qq2kn]

@DerbyCityRC that is on sale right now too.... hhmmmm.

[@DerbyCityRC]

@JP-qq2kn its not any cheaper than it has been. Just the same deal it has been, but it is still a decent deal lol

[@boduke9428]

​@@DerbyCityRCmine, and everyone else's Xmaxx has that rubbery plastic everything and they handle like crap to. Suspension components require a rigid mount to function. It's a trade off. I prefer my big Arrma trucks and Redcat nailed it with the Vigilante. It's the best handling large scale plastic chassis I've had by far. It handles and especially lands jumps much better than my Xmaxx. It drives like I'd Arrma made a big plastic truck. I'm definitely getting one of these but it'll be after version 12345 or whatever number it takes to get it properly sorted. I've got way to many rigs to bash already to be knowingly buying bad ones.

[@DerbyCityRC]

Yup definitely a trade off! There’s a few things they could do to stiffen that up a little bit that shouldn’t hurt durability too bad. We will see how the next version does. I’m sure we will have a version 7 by winter with an announcement for version 9 😂

[@206beastman]

Your back yards huge why dont you build a track??

[@DerbyCityRC]

I absolutely have plans for better dirt jumps back there and a small track. Issue is it’s all on a very slight slope (especially where I want the track to go) so dirt would wash away pretty quickly. Trying to figure out the best solution.

[@teddy_123.]

HI

[@DerbyCityRC]

Hey!

[@andrew4403]

Yeah that is weird that it's trash day when you record. It's never trash day when you record.😮🤨🤔😬😁. Just kidding I think every video you have out I see trash cans.lol lol.😂😂😮😮

[@DerbyCityRC]

Haha! I know. funny stuff!

[@coyotex850]

looks like you made a granite v4 if anything 😂

[@DerbyCityRC]

HyperGranite! 😂

[@DavyTracy-l7i]

Miller Charles Jackson Lisa Jackson Joseph

[@CarolynKaplan-j2d]

Young Brenda White Amy Rodriguez Eric

[@grumpygrandpa3640]

This version just isn’t worth buying and there is so much talk about what’s coming to what KZbinrs got I’d be very dubious about buying one. Beyond RC made some statement about it from his supplier which made me think maybe he is just supporting him as he has a container full on route so would lose money on bad sales. Version 1.5 version 2 until we see it I’m thinking it’s all talk and I really hope they don’t lie and send these out as an updated version just to get rid off them

[@DerbyCityRC]

Man I know. Seriously it’s been so confusing. Now what it looks like is happening is we will get a “between” version. A V1 plus I believe theyre calling it. I should have one pretty soon and my Makerfire rep assured me any orders from them or really any registered mjx dealer will be getting that. So let’s see what that looks like and how the upgrades help, but then supposedly an actual v2 in just a few months.

[@pjpankratz8829]

Yay first to "Like" :)

[@DerbyCityRC]

Noice, thanks dude!! 😅

[@happydayrc]

amico sei meglio degli ingegneri

[@DerbyCityRC]

Haha, thanks!

[@philpowell1162]

It's a arrma wana be!

[@Hutch_Davenport]

That chassis flexes more that Schwarzenegger at the Roid Store.

[@DerbyCityRC]

lol ya it does. The new version that literally just dropped is much better.