Design of Reinforced Concrete Columns (Part 1)

Design of RC columns. Types of Columns. Short and Cylinder Columns. Braced and Unbraced columns. Failure modes of RC columns. Detailing of Reinforcement in Columns.
The links of other important videos are given below:
- Stress-strain curves for concrete and steel:
• Stress-Strain Curves o...
- Analysis of RC sections according to the BS8110 code: • Understand Reinforced ...
- Design of singly reinforced rectangular concrete sections: • Design of Singly Reinf...
- Analysis of singly reinforced concrete rectangular sections: • The Capacity of Singly...
- Design of one-way slabs - Part 1: • Design of Reinforced C...
- Design of two-way slabs - Part 1: • Design of Reinforced C...
- Design of Beams - Part 1: • Design of Reinforced C...
- Design of Columns - Part 1: • Design of Reinforced C...
- Foundations Part 1: • Foundations (Part 1) -...

[@jeangc4283]

Great explanations throughout. Thank you!

[@nicolasmarie4398]

Thank you very much. Very informative. Hard to find tutorials and exposition. Great works.

[@ahmedaweysmohamed6378]

Thanks Doctor it was so helpful , we need more of RCC according to BS8110

[@akarinhassanaynte4321]

U hit the nail on the head proff Thnks for ur explanation.

[@gnidnoeled786]

The content creator (the Professor) really deserve to be liked and we ought to subscribe. I suggest that we don't skip the ads. This is one way of reciprocating his hard work. Cheers Professor for your contents. Bravo. 👏👏

[@urvashijoorawon9122]

I am very grateful to your videos sir. Much appreciation from Mauritius.

[@wasanasenanayake1479]

Perfect job doctot thank you so much it's crystal clear

[@u_tsf]

Very beautifully explained with wonderful ppt.

[@karabo9747]

The lecturer I wish I had.

[@smronly]

Thanks dr very interesting and helpful from mauritius

[@BashirAhmed-jo4zq]

Few of the best videos on KZbin regarding civil engineering

[@markr8604]

Can't agree enough. They are enjoyable and have helped massively in dispelling confusion in the codes.

[@BashirAhmed-jo4zq]

@@markr8604 Might be you are right because I disnt look into that aspect.

[@steelramesh]

very much informative,i have enjoyed and nice learning.

[@kudakwashemoyo8228]

Very enlightening doc, I really appreciate

[@MrElgamal77]

Thanks

[@alisaeed6427]

ماشاء الله تبارك الله تستاهل كل خير الله يجعله في ميزان حسناتك هذا العمل الذي ينتفع به ❤ نرجوا منك ان تعمل المزيد من الفيديوهات عن التصميم بالكود البريطاني

[@Rabbaniy1]

Very deliberate and elaborate explanation. Thank you Engr

[@MrElgamal77]

Happy to help you.

[@chanakaarchitecture1839]

thank you very much this is very informative dr. from sri lanka

[@samwrrobert3744]

Thanks alot dr. um following this from Tanzania

[@MrElgamal77]

Thank you. I appreciate if you can share with your colleagues to share the knowledge.

[@ibnuahmed3761]

Thank you Dr for sharing this luctures Thanks from East Africa Hargeisa Somaliland 👍

[@MrElgamal77]

You are wellcome.

[@arsryrhk]

One of the best video on column design

[@MrElgamal77]

Thank you. You are welcome 😊.

[@sharvinsivakumar4914]

Superb explanation!

[@sudarshannikam5243]

Doctor , Heartily thanks for this excellent presentation & teaching .God bless you. From India.

[@MrElgamal77]

Most welcome!

[@user-qn6qr8yk9g]

❤❤​@@MrElgamal77

[@moulayecherif7036]

ما شاء الله , جزاكم الله خيرا, أخوك من موريتانيا

[@MrElgamal77]

شكرا على الدعم. أرجو المشاركة و النشر لتعم الفائدة أكبر عدد ممكن.

[@younisaljabri3348]

Thank you doctor for this beautiful explanation and the wonderful topics.

[@priscillahwambui3544]

Following from Kenya ,very nice

[@edwinotieno8049]

Hea sister, How are you?

[@samuelmuturi297]

@@edwinotieno8049 Niaje niconnect na place naweza pata internship

[@kasundesilva1338]

Great work

[@paulmwangi5061]

Thank you doctor for this great sharing,following you from Kenya.

[@MrElgamal77]

Thank you. I appreciate if you can share with your colleagues to share the knowledge.

[@emmanuel502]

Uko hapa juu ya project?😆

[@khursheedkhan9286]

@@MrElgamal77 foggy guy 6

[@samuelmuturi297]

@@emmanuel502 oyaa unaweza niconnect na place naweza pata internship

[@saadkhokhar190]

Another great work.. 👋

[@MrElgamal77]

Thank you. Part 2 will come soon.

[@MrElgamal77]

Thank you. I appreciate if you can share with your colleagues to share the knowledge.

[@mudassarnadeem4084]

Mashaalha Sir We Need More Lecture About Structure Design Please upload Thanks

[@thepuncha1594]

Clearly Explained

[@mohamedthasneem7327]

Thank you very much sir.

[@hughmunyaradzimadhaure1639]

Great work Dr please upload more lectures. Is it possible to get PDF format of your examples or notes?

[@yaseeng7881]

Thanks a lot Dr El Gamal, very helpful. Can you please do videos on slender columns too.

[@MrElgamal77]

Noted. I will try.

[@syedumarayub3263]

Thank you sir u are the one ✌️✌️🥰😘

[@himalayagautam3114]

Thankyou.. beautifully explained.. If u could share the pdf as well.. it would have been more exciting to learn..

[@phyohtetkoko929]

Thanks For Teaching Sir

[@MrElgamal77]

It's my pleasure. You may share with your colleagues.

[@zekiasmelaku4454]

great and great ideal

[@ahmedbenlarbi2348]

GOD BLESS YOU . THANK YOU SO MUCH .

[@MrElgamal77]

You're welcome!

[@maankaproduction79]

thanks teacher

[@tehsoonguan9343]

Thanks !

[@abdiqanicaligalol6192]

Thanks 🙏🙏

[@kennyomega8937]

Thank you so much sir

[@MrElgamal77]

You're welcome

[@ashenwarnakulasooriya498]

Very informative. Thank you. Really appreciate if you could share the pdf version as well.

[@user-qn6qr8yk9g]

شكراً لك

[@user-qn6qr8yk9g]

الله يعافيك

[@user-qn6qr8yk9g]

❤❤❤

[@gnidnoeled786]

@Dr. El-Gamal, Are you referring to precast columns when you say horizontally poured columns?

[@OmarSophi10]

Thanks Dr. Sharif if space of link reinforcement is larger 250mm . every 150mm add other link. my question what help me addition link reinforcement.

[@michakrol2649]

Would be nice to see the same for Eurocodes

[@kuldeeps3830]

Can u plz do videos on all Reinforced concrete foundations like combined, raft, pile, strap?

[@s.t.b1515]

جزاك الله خيرا دكتور علي الشرح الرائع عندي سؤال لو حائط خرسانة سمكها 40 سم ماهي اقل شبكة للحديد طبقة للكود البريطاني

[@etabstutorialsv2067]

Wow sir you are a amazing

[@MrElgamal77]

Thank you so much 😀

[@udobuzoraugustine6757]

Thanks for the video. What about unbraced columns

[@udushyatv8837]

Alright, thanks

[@aminulshahan2821]

thanks

[@MrElgamal77]

Welcome

[@yirrroy22tyrri82]

Doctor plz could you tell me, Does it enough for me to understand theoritical procedures of designing any structural member to be a good engineer???! Or what should i have to do to be so???! Plz answer me cause am suffering from this point for years now and i cannot find a job.

[@aubreysemien1336]

Great Presentation. Would it be possible to get a copy of the pdf of the presentation?

[@engraciolucas8064]

Can i get a book or even PDF of all this class? it so interesting.

[@BaderSinjary]

Best

[@smronly]

Hi Dr Sherif, Your videos help me a lot in my studies in civil engineering - thank you However we would appreciate if you could further series on the Reinforced Concrete Design on topics such as: 1) RC shear walls 2) RC Retaining Walls 3) combined footings 4) Raft Foundations Thanks for your lectures

[@MrElgamal77]

I will do my best. Very busy but I will try.

[@smronly]

@@MrElgamal77 thank you Dr El Gammal May God rewards you abundantly

[@aizzatdanial7029]

can u give example of horizontally cast column?

[@abinazeradmas1466]

Thanks D/r

[@etabstutorialsv2067]

Sir kindly add more videos and topics

[@yesufahmed6248]

Aww,dr I am yusuf Ahmed from habesha my profession is civil ,I have been followed your lecture .but I want to help me how to calculate load from roof up to foundation simple revision .Thank you.

[@mathstube1802]

which codes is this Dr.?? great and knowledge sharing videos

[@MrElgamal77]

Thank you. This is the BS8110 (British). I appreciate if you share the knowledge with you coleagues.

[@prenumenumedefamilie3418]

Hi there ! Small questions ! 1 Floor building project mix structural and masonry made from AAC 500-600kg/m3 Parietal beam. What is the difference between 30x30 and 25x36 columns sections in this case .Do you think are compatible using same amount of rebar inside ? I want to make as such that the beam size fits the masonry size that s way!

[@MrElgamal77]

Yes, correct. But a column with 36 is not common and not practical. You may use 25x40 instead.

[@prenumenumedefamilie3418]

@@MrElgamal77 Hey Dr.Sherif .I want to pour a foundation !and there is a -1,2 m from ground soil .I want to pour it in 3 step in 3 levels according my 0,6 m height wood framework and using it like climbing wood framing ! i know is possible but never done it ! rebar's will be there of course! and top beam rebar's added before last pouring sequence ! what do you think ?i m thinking creating Lego forms on top surface previous pouring to ensure better bounding for earthquake resolve issues. Also cement grounding on contact pics! will be like forming prefabricated in place sow that will stick previous one ! i want to use less wood framework for money issues. Any other info for this will be welcome !thank you !

[@mubitajulius6098]

how do u calculate a cantilever slab

[@highlightsfootballworldview]

thankyou for your tutorial can you share ppt for civil engineering courses please?

[@umi_617]

Which code included ?

[@presidiun]

Which country's construction code do you reference?

[@gnidnoeled786]

Dr. El-Gamal, are prestressed columns exist? If yes, when and what's the condition an Engineer to consider to design such column? Thanks in advance to your reply.

[@MrElgamal77]

Why do you need to prestress a column? We use prestressed to reduce the tension and deflection in beams and slabs.

[@gnidnoeled786]

@@MrElgamal77 Thanks for the reply. I was just eager to find out if applying the same system in prestressed piles would be effective to balance tension during lifting and bending during installation, to control cracks as well.

[@adnanalsadon1425]

السلام دكتور هل لنا ببعض المعلومات عن العمود الفرعوني( العمود المائل)

[@hishammagd]

ما شاء الله

[@MrElgamal77]

تسلم حبيبي. لا تنسانا من دعائك في العشر الأواخر من رمضان. ربنا يجمعنا في الفردوس الأعلى من الجنة.

[@samiqasem4276]

سلامات ياريت تعمل محاضرات تحكي عن flat slab مع الشكر

[@MrElgamal77]

ان شاء الله. ممكن تساعد ب like and share حتى ننشر المعرفة بين اكبر عدد ممكن.

[@seraphinobame9464]

Hello doctor. i just finished my license, i am very interested and would like to do the same professional careers as you. is it possible to know which specialty did you do a master? in phd?I got an internship in a structural design agency. I also have some design gaps, what to do to fill them. thank you

[@smronly]

Can you do lectures on structural design if you are a licensed engineer

[@seraphinobame9464]

@@smronly are you asking me ? If it's a question, yes I can because I'm working on one of the design company in China.

[@smronly]

@@seraphinobame9464 Yes, I am in fact making a humble request to you, as a student in civil engineering I would like you to make a Series of Video Lectures on : Reinforced Concrete Design to BS 8110 From Basic to Advanced Level As I rely solely on those kind of videos to learn Structural Design.

[@derejehabtamu-hy8uf]

The exam of RCC 2 is Afternoon i started study at the morning ....😂

[@engineerkadiye1467]

RCC 2 exam is next week. I just found out this generous man.

[@vijayfanclub2026]

How to find hight of column

[@vijayfanclub2026]

Explain Lo ,Lex ,Ley briefly

[@mnangatlopeta9493]

Please send me the document

[@mubitajulius6098]

how do u calculate a cantilever slab

[@MrElgamal77]

Cantilever slab is similar to one way slabs. It is fixed from one side only. If you have a uniform load, the moment will be a negative moment of wl2/2. This will require top steel. The rest will be as one way slab.