Seriously? The 140mm fan version of the nv7 and you used 120mm fans?
@chrisf.28579 ай бұрын
For real? Well thanks random stranger for the time save! I won't be watching now and will wait for more build videos lol. Cheers!
@KommonCents_9 ай бұрын
I'm disgusted by this affront
@aaronmcneal16989 ай бұрын
I want to see the back of the case with the cover off to see the rear tubing
@BonaDeum5 ай бұрын
It is right there? 13:33
@grizzlysquad91717 күн бұрын
That panel is good to put their lcd screen on that spot
@root1973310 ай бұрын
The tune at 14:00 kinda reminds me of The Beatles' Blue Jay Way
@DesignsByIFR10 ай бұрын
Yes!
@mancavepc17309 ай бұрын
Beautiful how those 2 top lines covered the huge gap that comes with this case!
@DesignsByIFR9 ай бұрын
Merry christmas mate!
@AmeliaRosina10 ай бұрын
INSANE!!!!!!!
@DesignsByIFR10 ай бұрын
=)
@BeardOvBorgia10 ай бұрын
Why use 120mm fans/rads when the NV9 is 140mm focused? Anyway, great build mate
@DesignsByIFR10 ай бұрын
You can use either =)
@BeardOvBorgia10 ай бұрын
@@DesignsByIFR Just like putting on winter socks during the summer.. Both works, but.. =P
@aaronmcneal16989 ай бұрын
I have the Enthoo Lux2. This looks like they took that case and flipped the placement of the MB to the bottom and the psu to the top. I love it
@themeeksproject978510 ай бұрын
luv the build and as always good job more coffeeeeeeeee!!!!
@DesignsByIFR10 ай бұрын
Thanks!!
@viharkottakota184910 ай бұрын
this case looks so cool
@DesignsByIFR10 ай бұрын
♡♡
@TristinTalksTech10 ай бұрын
That final pan is sick!
@DesignsByIFR10 ай бұрын
♡♡
@Road-wx9ok10 ай бұрын
Another incredible build.
@DesignsByIFR10 ай бұрын
Thanks again!
@MrPugheaven7 ай бұрын
looks awesome that one really clean. Surprised you could get the fans to set to gold though through RGB they look spot on!
@ColinChang810 ай бұрын
Sick build! Love the runs to the passthrough! Have you used much Aqua Computer parts by the way? Would love to see content creators use more of their gear.
@DesignsByIFR10 ай бұрын
I have not used much, hard to find in Australia
@Pounyet9 ай бұрын
Be careful with Aqua Computer, their after-sales service is catastrophic, refusal after refusal even without being responsible
@SmoodGraphics5910 ай бұрын
If you have one you can put an led screen on that blank area
@DesignsByIFR10 ай бұрын
There is alot i could do with the blank area, but i am talking about the stock case, there is lots of potential there
@SmoodGraphics5910 ай бұрын
7:16 the only thing you’re missing out by using these fans is when you going for exhaust you would be stuck with the ugly side, because lian li have no reverse fans so phanteks d30 fast would look better
@DesignsByIFR10 ай бұрын
Lian li do have reverse fans
@vinski_9 ай бұрын
@@DesignsByIFR not in 140
@viharkottakota184910 ай бұрын
Do you do like custom pc builds for people if they like pay you and ask you what they want?
@DesignsByIFR10 ай бұрын
Send me an email =)
@Monchthegronch10 ай бұрын
Congratulations on 600k subscribers
@DesignsByIFR10 ай бұрын
Thank you ♡
@davidgates56992 ай бұрын
The fans could have been placed in the back to give room to distro in front.
@JesseWarren-t9c2 ай бұрын
Do you remember what rgb gold color code you use for this build?
@goshygill115510 ай бұрын
looks majestic
@blackbirdpctech10 ай бұрын
Damn ... stop building awesome PC's ... I have to get this case now 😉
@DesignsByIFR10 ай бұрын
♡♡
@wademarsden605910 күн бұрын
sick build do you do custom builds for clients.... I'm based in Sydney this for sale ?
@hhPoppe10 ай бұрын
Absolutely stunning build! I was wondering. How do you calculate where to drill the holes to get exactly parallel tubes before installing the gpu and cpu with fittings and such?
@DesignsByIFR10 ай бұрын
I actually pre bent the tubes and marked where i have to drill
@nitro_head10 ай бұрын
Now that is niiiiiccccce !!
@DesignsByIFR10 ай бұрын
Thanks!
@ChristianWheel10 ай бұрын
The gold and black looks fantastic! Especially impressed with how well the color of the unifans matches the gold fittings. Curious if the lian li upright gpu mount might work in this case. I have the evo xl but prefer the aesthetics of the nv9 and if I could mount my strix 4090 upright I would be sold. Tried to do my build in the nv7 and it was just too cramped.
@DesignsByIFR10 ай бұрын
There are certainly plenty of brackets out there for verticql mounting that would work
@ChristianWheel10 ай бұрын
@@DesignsByIFR thank you for the reply, but I don't mean vertical mounting, I'm talking about the upright configuration where the GPU is mounted in the spot you placed the distro plate in this build. 💛
@fairycat10 ай бұрын
Very awesome build. Thanks.
@DesignsByIFR10 ай бұрын
Glad you like it
@aLeXxBoosT9 ай бұрын
Good afternoon! Which product is better? Phanteks NV9 or Lian Li O11D Evo XL?
@rememoriess8 ай бұрын
interesting choice of cooling it with milk
@silentscope74409 ай бұрын
Did you have to drill holes into the back of the case for the tube runs???
@mahook9 ай бұрын
Only thing prevents me from buying is front usb beeing at the bottom of the case as I would sit the case on the ground it is too low and deal breaker
@Fishion.3 ай бұрын
For the top part above the mobo, you can put an lcd screen
@Nordstrom_089 ай бұрын
Fuck it looks amazing!
@r.s.417410 ай бұрын
Instant classic.
@DesignsByIFR10 ай бұрын
♡♡
@mking15122 ай бұрын
What would be the cost for this ?
@fireflexgaminglk10 ай бұрын
anyone can not destroy Designs By IFR is am right 🙂😁😁
@DesignsByIFR10 ай бұрын
♡♡
@sourie9 ай бұрын
What is the material for the rear panel, acrylic sheet ? And what the paint type ?
@darthhokum10 ай бұрын
Perfect work 🔥🔥🔥
@apexdota214710 ай бұрын
daamn how much something like this worth approximately? including labor?
@iikatinggangsengii24717 ай бұрын
theyre not found anywhere, but just abit fairness here i guess, many reviewers can live pretty well w sponsors
@belkhirismail623210 ай бұрын
Nice build how much cost in total ?
@DesignsByIFR10 ай бұрын
Nit 100% sure as i reuse a lot of parts i already have
@harshgautam134010 ай бұрын
Love your vedio
@DesignsByIFR10 ай бұрын
Thanks!
@providencez94969 ай бұрын
Whats the total cost of everything?
@JackTotGaming10 ай бұрын
All that cooling potential and an i5 13600k? I would dare say that anyone looking at the NV9 (instead for the 5 or 7) is not going to be running an i5 cpu
@DesignsByIFR10 ай бұрын
You would be surprised. The i5 is a fantastic cpu for gaming, if they are doing workloads then yes i would agree
@langer197210 ай бұрын
Why are you using DDR4?????
@swizzler805310 ай бұрын
Why not?
@langer197210 ай бұрын
To slow and in the world of tech you move forward not backwards.@@swizzler8053
@DesignsByIFR10 ай бұрын
I explained in the video
@Md.AkramuzamanKhan10 ай бұрын
Love from Bangladesh
@Mintberry4210 ай бұрын
can someone please explain the difference between the NV7 and NV9 to me? is it just that some dimensions are larger?
@DesignsByIFR10 ай бұрын
Larger for more watercooling compatibility
@ChristianWheel10 ай бұрын
There's the nv5, nv7 and nv9, the higher the number at the end the larger the case. This one has better support for eatx motherboards, more fans, more watercooling support, more gpu configurations.
@logan118610 ай бұрын
The main difference is that the nv9 supports triple140mm fans on the top, bottom and sides. Vs the Nv7 which could only do two on each side
@airrow0510 ай бұрын
What the actual fuck are those @13:28 holes?
@mamadmamadi64299 ай бұрын
You need more light for your videos bro
@tophatvideosinc.585810 ай бұрын
thats an o11-d all right...
@The_Flame_Imperishable10 ай бұрын
What's the purpose of the panel that you drilled? What's on the other side of that panel?
@DesignsByIFR10 ай бұрын
Thats the black panel i put in, i showed the back with the white tubes, its to connect everything so i can keep all the tubes parallel
@The_Flame_Imperishable10 ай бұрын
@@DesignsByIFRThanks - I’ll go back to that part. So it’s not required, but more for aesthetics? Still looks amazing of course.
@mothraman319510 ай бұрын
My practical minded brain crashed watching this but i guess it was about aesthetics, good job, looks great, personally i would have gone with black coolant to match my black heart.
@DesignsByIFR10 ай бұрын
Thanks
@BohoušPittauer10 ай бұрын
Only i5? Online 3200MhZ? Lian Li in Phantek?
@DesignsByIFR10 ай бұрын
Yep
@dimitriblaiddyd18459 ай бұрын
Does anybody know if this case is out yet?
@Frozoken9 ай бұрын
it is
@Omar-almutairi10 ай бұрын
I would recommend getting an i7 14th gen so there not as much bottle neck. Love your content keep it up hope u become one of the best youtubers in the world
@SaifAli-oe3ph10 ай бұрын
send me the heatsink
@DesignsByIFR10 ай бұрын
=)
@TechWithBlack10 ай бұрын
😍😍
@DesignsByIFR10 ай бұрын
=)
@jasonlin488210 ай бұрын
think the computed and this are my 2favoyrite buidls
@DesignsByIFR10 ай бұрын
Thanks!
@armanahmedar10 ай бұрын
love from bangladesh🎉🎉
@DesignsByIFR10 ай бұрын
♡♡♡
@WeltBauern_711710 ай бұрын
If building an i7 14700k and an rtx 4080 is better why use an i5
@argyyie10 ай бұрын
bahasa padang jadi brand
@SmoodGraphics5910 ай бұрын
😂 9:31 you could have just rotated the top radiator 12:47 do you know you can remove those RGB frames you are just making it harder for yourself😂
@DesignsByIFR10 ай бұрын
No i think you miss understood everything i said. Also rotating the radiator would ruin the tube look and leave even more top panel exposed, baddd idea.