DESTROYED my Corvette C8R in 1/43 scale by TSM.

  Рет қаралды 240

It's all about racing

It's all about racing

Күн бұрын

Featured in this video is a 1/43 scale TSM Corvette C8R. I bungled handling this model, and the extremely fragile rear wing broke. Glued it and secured it...or so I thought. Then it fell off again
Treied to rescue it and ended up destroying it. My loss is your gain. You get to see what a TSM model looks like without having to destroy one of your own. I should know better, but I screwed up. Never handle your collectible models. They are not toys, and we are adults....well, maybe not me.

Пікірлер: 19
@82bowtiejones
@82bowtiejones 16 күн бұрын
Sorry for your loss. I was dusting the other day and almost dropped my Mad Panda. At that moment, I realized that all of my 1/43s are my favorites.
@markzebr6463
@markzebr6463 16 күн бұрын
had that been either of my (2) Mad Panda's, I would have been really pissed. I'm currently looking at another Mad Panda on eBay. Price was too high.
@andymuggeridge7588
@andymuggeridge7588 16 күн бұрын
Bad luck Mark😖. It’ll be therapeutic getting a replacement. Interesting to see how the model is made up.
@markzebr6463
@markzebr6463 15 күн бұрын
Yes. Really sucked. Mad at myself for stupidity. Good news is that I got a cool insight into the quality and workmanship that goes into the model. The level of details that you would never see is remarkable. Key point: all models are fragile and handle with care
@patito8728
@patito8728 16 күн бұрын
Damn, u got my fear everytime i handle these, even on the bases.😔 i hate that it can happen, i hope u can refound the same
@markzebr6463
@markzebr6463 16 күн бұрын
Good news is that Toronto MotroSports is clearing out old TSM and Spark models and I can get another one for less than 50.00usd. I'm not a huge fan of the C8 Corvette. If it had been a Porsche I'd have been doubly pissed. The thing that I hate most is replacing an old car when there are so many other ones I'm looking at and even more pre-orders. The car that I want the most right now is the Hertz Porsche 963. Problem is that everyone wants 150.00usd or more for it in 1/43 scale. Too much.
@patito8728
@patito8728 15 күн бұрын
@@markzebr6463 yes some models are crazy with speculators..ive paid 200euros the naked Lady 911 gt2 and the mirror fell off because the acrylic case wasnt totally secured by tape anymore (mishandled it)😅
@kennethmattsson880
@kennethmattsson880 3 күн бұрын
That sucks, best just to get a replacement, otherwise its going to annoy you for a long time. Have managed to damage one model so far. Spark Porsche 911 GT1 1/43. Small scuff in the paint and knocked of one of the side-view mirrors. I glued the mirror back with UV activated glue and that worked really well. The scuff I decided to live with, hardly noticeable don't want to risk making it worse by rubbing polishing compound on it.
@markzebr6463
@markzebr6463 3 күн бұрын
Thanks, for the feedback; Never heard about UV Glue. Looked it up on Amazon and ordered it. See how it works.
@kennethmattsson880
@kennethmattsson880 3 күн бұрын
@@markzebr6463 Your mileage may vary but worth giving it a try. In my opinion it gives the best of both worlds. It cures in seconds like a superglue but not until you zap it with UV light, so there is time to align things properly.
@stevieboymkii
@stevieboymkii 16 күн бұрын
Sorry to hear this. I would potentially take if off your hands as I could probably fix it up - it's different for everyone but I personally have no trouble fixing up these small photo etched parts. I think I showed you the pictures of the Spark Falken M6 GT3 that got smashed in the post and I basically got that back to 95%+ condition. Drop me an e-mail if it's possible.
@markzebr6463
@markzebr6463 16 күн бұрын
Steve, I'd happily send it to you, but shippjng costs oversees are close to 20.00.
@stevieboymkii
@stevieboymkii 16 күн бұрын
@@markzebr6463 is that 20 dollars? They're about the equivalent of 80 dollars upwards here.
@markzebr6463
@markzebr6463 16 күн бұрын
That might even be much lower. I sent some hero cards to Spain for a kid. Cost me 40.00 usd. Coukdnt beleive it. Sent back a 1/18 scale model that I ordered domestically for 30.00usd. I was pissed because the seller offered me a discount on a future order and I knew id never buy anything from him. Shipping is one of the reasons i dont sellanything on eBay
@stevieboymkii
@stevieboymkii 15 күн бұрын
@@markzebr6463 I'll drop you an e-mail about it.
@stevieboymkii
@stevieboymkii 14 күн бұрын
@@markzebr6463 I showed the cards you sent me to various people - my Dad enjoyed them in particular. It was a very nice gesture. In relation to the e-mail I sent recently, it was more to sort out anything that needed to be sorted over this C8R (the pictures were from a previous e-mail, I just didn't change the e-mail subject), I can send another e-mail if that helps.
@albertomegapro
@albertomegapro 16 күн бұрын
Oh my God, i'm so sorry, but, I have all my cars out of the box and I handle them when I want to look at them and this never happened to me
@markzebr6463
@markzebr6463 16 күн бұрын
Big screw up on my part..Im so pissed
2023 Canyon Aeroad CF SLX8 ULTEGRA Di2 Dark Blue
1:45
ES335
Рет қаралды 9 М.
Giving 1000 Phones Away
00:18
MrBeast
Рет қаралды 27 МЛН
it takes two to tango 💃🏻🕺🏻
00:18
Zach King
Рет қаралды 28 МЛН
Маленькая и средняя фанта
00:56
Multi DO Smile Russian
Рет қаралды 5 МЛН
ХОТЯ БЫ КИНОДА 2 - официальный фильм
1:35:34
ХОТЯ БЫ В КИНО
Рет қаралды 2,3 МЛН
2024 Corvette ZO6 GT3 50 years of Mobile 1 special livery.
1:25
It's all about racing
Рет қаралды 1,7 М.
Infraction 6S Water Cooled !!!!!!!
0:45
Clifford
Рет қаралды 136
canyon aeroad cf slx8 dark blue 2
1:16
ES335
Рет қаралды 10 М.
Фура едет на бутылку!
0:22
КОЛЯДОВ
Рет қаралды 2,2 МЛН
Механик правильно поступил? 🤔
0:31
Фильмы I Сериалы
Рет қаралды 1,1 МЛН
Truck Tire Wash Satisfying Process
0:18
Meta Process | Truck Wash
Рет қаралды 8 МЛН
Truck spring suspension straightening process #youtubeshorts #youtube #foryou
0:59
Pk Awesome Restorations
Рет қаралды 4,8 МЛН