DETACHABLE TABLE for ROUTER IN YOUR SAW, Easy and very cheap Dewalt 745

[@VE3AVA]

Great Idea and for me, a huge space saver. Loved it UNTIL he gouged the massive chunks out of his saw fence!! oh my. Sacrificial board for me I think.

[@waynemiller6070]

best multipurpose router/table saw adaption I've seen so far.

[@antoniolabriola687]

Por lo sencillo es la mejor opción que vi para hacer una mesa para el router. Felicitaciones.

[@YsiloHago]

Gracias por comentar

[@joshcosta423]

I can't speak Spanish but the video quality was great! And a great idea!

[@YsiloHago]

thanks so much for watching, I'm glad you liked it

[@liers99]

Enough videos like this and I could probably speak spanish

[@duckydrummer6331]

No habla Espanol - but I understand the video perfectly! This is a genius idea! Can't wait to make mine. Thank you!

[@vkhombal]

exactly. i too dont understand spanish yet can appreciate the idea behind the design. gracias.

[@Love4raine]

This is without a doubt the simplest and the best idea I have seen yet for a router attachment using what I already have for a table. I most definitely am going to build this to my Dewalt 10” table saw. I have been on here looking at how to mount this dewalt router DW618K to the BOSCH RA1181 . But now I’m just going to build this tomorrow instead. Thank you sir very much for this intelligent idea you have come up with . It’s very simple , sturdy, it also extends the table for the table saw also. Thank you again

[@gustavoprietonevarez4566]

Es el primer video que veo y me sorprendió tu explicación éxito , yo estoy empezando en esto de la carpintería

[@YsiloHago]

a la orden

[@JuanPabloMartinez-bi8cs]

Muy bueno yo necesito hacer algo parecido gracias x compartir tu idea. Saludos desde Uruguay

[@perryheideman9007]

Thanks for the inspiration. I just finished making virtually the same for my DeWalt 745 yesterday and it works great. I decided to just glue in some extra bracing pieces for added strength, but essentially the same unit. Good idea and glad you took the time to put a video together.

[@julianzacconievas]

Qué bueno ver un vídeo de trabajo con madera en español y con buena producción. Gracias, es una idea muy buena, la voy a usar

[@YsiloHago]

gracias

[@fishwhisperer101]

This mostly solves the problem of not being compatible with a dado stack. Thank you!

[@Stevesbe]

You can order a longer shaft and install it that will allow a dado stack . there's a video on KZbin about it

[@luismaya7454]

De verdad mis respetos, me agrado muchísimo el ser decidido a modificar una sierras sin miedo a cortar partes originales, gran idea felicidades. Saludos

[@markhedquist9597]

I watch many, many videos on building router table attachments for table saw. I keep coming back to yours and saying, "This is the best one. Simple, yet very accurate and stable." I think I will build this!

[@arturoflores7876]

excelente video, yo no sabia que hacer para no tener una mesa de router aparte y la sierra en otro lado, asi se conjuntan las 2, felicidades

[@YsiloHago]

gracias

[@elmertrejo6506]

Me gusto mucho la idea de tener el table saw junto al router.. 👍👍

[@josevillanueva6992]

Good job sir. Greetings from California. Me gusta tu idea. Yo antes hice una similar para mi Dewalt de bateria. Lo unico que yo no sacrifique la fence (la guia) yo le hice su propia guia en caso que en ese momento quiera cortar algo en la table saw. Asi no tengo que ajustar otra vez la guia del router. Pero todo lo demas te felicito.

[@YsiloHago]

Gracias amigo, saludos desde Mexico

[@stevesls007]

My espanol is muy poco... however MUCHAS GRACIAS for the MUY BUENO presentation.

[@davidelaldeano5690]

Primer video q veo tuyo y creeme yo que estoy empezando en carpintería gracias

[@marcosangel4054]

Hoy aprendí mucho eso es genial 👍 mis bendiciones Dios los bendiga…….

[@MTChains]

Excellent idea and execution. Your instruction is impeccable, easy to follow and easy to understand and the translation was wonderful. Muchas gracias.

[@stevenfoust3782]

I just learned some Spanish cuz the pictures were in English. Nice build , great idea.

[@YsiloHago]

subs available now

[@1982MCI]

I’m sure glad he used the English pictures and not the Spanish version also. I was also able to learn a lil Spanish cause of the English pics and would have been totally lost without them so bravo for thinking ahead and filming with the English camera instead of the Spanish one brother!! Great job!! 👍

[@gustavodonado8458]

Qué tipo de broca es la que has utilizado en el minuto 0:53 pues están geniales. Agradecería mucho una respuesta.

[@abrahamsustaita1355]

Es sencillo que tiene todas herramientas la verdad uno que va empezando apenas si tiene una cierra circular, pero bueno cada quien tiene lo suyo, buen video

[@YsiloHago]

Abraham, esto lleva tiempo, yo empecé con una ingletadora usada y poco a poco fui adquiriendo más, animo, busca herramienta usada te dará por lo menos la posibilidad de poder hacer cosas nuevas y experimentar. Saludos

[@willaguayo4937]

@@YsiloHago cierra circular o sierra circulatoria

[@spazianiband]

Ola, veramente un ottimo lavoro professionale, mi hai dato una idea fantastica, complimenti e grazie.

[@mikehammer4546]

Even though I dint understand what you were saying I total understood your video. Great job 👍👍

[@rigosandoval282]

Excelente Demostracion . Buen Trabajo. Esperamos Mas Videos Como Este.

[@Serg3431]

Спасибо Вам за идею! Привет из Сибири!

[@YsiloHago]

thanks, please share it

[@victorj.garcia9861]

Saludos, me has dado una muy buena idea para ampliar el ancho de la mesa de la sierra.. llevo meses planeando hacer una mesa para la sierra y tener mas superficie a ambos lados, esta idea apesar que es para un router la puedo utilizar solo como extensión.. gracias !

[@YsiloHago]

Saludos, que bueno que te sirvió

[@enidromero1830]

Gracias por darnos de tus consejos y conocimientos ya que estoy en construcción de mi casa , muchas bendiciones

[@YsiloHago]

Saludos

[@dmitriykhudoleyev7308]

You have to sell this idea to DeWalt, they should be interesting to manufacture such extension. For sure I would buy it. Great idea.

[@YsiloHago]

Thanks

[@jefferyhaws7565]

Very good video. I have the same table saw with limited room to work. This should be a great assistance to me. Thank you for sharing your video and measurements.

[@amaurynegron4280]

Buen trabajo Amigo , es Usted un Pingu" !!!!! Gracias por el Demo ----- Feb-22/2021

[@Jimmy-tl2yn]

amigo yo compre ese mismo router y es muy bueno estoy muy contento con el, es por eso que me anime a hacer un video donde les comparto mi experiencia con este router

[@danielmalone46]

Thank you for this. I dont need router in it but want to extend the table. Thanks again

[@saulsalinas6419]

No me encanta la idea de perforar mi sierra pero creo que si valdría la pena, muy buen video!!! 👌🏻

[@elmerhernandez5661]

Si no quieres perforar tu sierra puedes usar abrazarse de metal,qué creo trabajaría lo mismo por que es desmontable,y la guía es mejor la idea de agregar la madera a agujerear el metal sólo en casi necesario

[@saulsalinas6419]

@@elmerhernandez5661 muy buen tip, voy a buscar algunas porque si me gustó el diseño.

[@YsiloHago]

Gracias por tu aporte, yo añadiria que pudieras colocar un tope por debajo para que no se corriera tu base, resulta muy pesado el router y con la vibracion pudiera desplazarse hacia abajo, si lo quieres hacer desmontable sin perforar puedes asegurarte que no se corra hacia abajo, porque puede causar un accidente, Un abrazo desde Chihuahua Mexico.

[@jonpharr451]

I like it but instead of drilling the fence I would make a U shaped fence extension with the router access cut into it. I also wonder if extending the fence this way to exactly the distance he moved the measurement adjustment would eliminate the need to adjust it. I can't mentally picture whether it will do that or move it twice as far.. I'll have to look when I get home. If I get into it I'll video it and add an English version for us gringos. I'm very impressed at your design, the precision is immaculate.

[@YsiloHago]

Good Idea , version 2.0 can be uploaded with that. : )

[@charlesholliday1013]

Genius. Couldn't understand a word but what a great job!

[@dannyh9010]

Turn on closed captioning. It is a very good English translation.

[@JuanGarcia-1125]

Gracias por tu aporte amigo. Se agradece mucho. Saludos desde Reynosa Tamaulipas México amigo!!!

[@amwartwork]

ive seen 3 versions of this attachtment. it can save you alot of money and space

[@jimwiskus8862]

Excellent job sir! One question, could you add a lift to that and drill another hole through the top so you would be able to adjust your bit height from above?

[@OGSpeedyBanana]

Wow! Great video. I get my Dewalt tablesaw next week. That’s the first thing I’m going to do. Gracias!!

[@YsiloHago]

subs available now, thanks

[@carpinteando9948]

me quito el sombrero muy chingon XD

[@fabianrodriguez763]

Buen trabajo y muy bién explicado. Gracias!

[@YsiloHago]

Saludos

[@dianeernest1660]

That is so awesome. I’m going to do that with my Router and Table saw. Thank you . Keep up the good work .

[@YsiloHago]

subs available now

[@justinmiller4406]

Who ever the 435 people are that disliked this video must have something against foreign languages. This is awesome stuff!! Love it!

[@irishRocker1]

Maybe they have something against destroying your table saw fence? Could have just clamped a sacrificial board to the fence instead of permanently destroying it

[@rogersoberanis5168]

Me encanto hermano, me acabo igual de comprar esa router y esta fabulosa

[@YsiloHago]

saludos

[@jorgemiguelgarcia3843]

Muy buena me gusto esa idea. Gracias saludos desde 🇵🇦

[@franciscogilbertodesousa2779]

Sensacional, tenho uma serra de bancada Dewalt e vou fazer uma extensão igualzinha a sua, parabéns.

[@OysterPir8]

THIS IS GREAT!!! I am totally doing this!! SUBSCRIBED - And now I need to learn Spanish!

[@franciscogilbertodesousa2779]

Muito bom, tenho uma serra de bancada dessa e vou fazer essa extensão para uma tupia, bravo.

[@PeanutsDadForever]

An excellent video. So clear, and I I don’t speak Spanish either! 🇦🇺👴🏻

[@juansantos9715]

Eres un genio bro el lunes hago lo mismo con la mia

[@YsiloHago]

excelente

[@raulgomez3588]

Excelente idea y muy bien explicado tu trabajo. Felicidades

[@YsiloHago]

gracias

[@mrluchothesupers]

EX-CE-LEN-TE hermano!! Thumbs up!

[@YsiloHago]

Gracias! 😊

[@josefranciscorojasluna3757]

buena idea, muy práctica

[@GCG1956]

Excelente, tengo la misma sierra y el mismo router. Tengo una mesa kreg pero es muy pequeña, tratare de acoplarla a mi sierra basandome en su idea. Saludos.

[@valterleao6795]

Parabéns pelo trabalho, excelente ideia, vou aproveitar esse sistema, é muito prático! Abraço aqui do Brasil 🇧🇷

[@YsiloHago]

obrigato

[@billr4283]

Excellent! I will use your ideas to build extensions for my DEWALT job site saw. Thank you very much!

[@bigrndahouse]

Who else here don't speak Spanish but still watched it and understood it. LOL. Great video and I may do this adaption. Do you have to cut into the table saw fence? Does that ruin the integrity of the fence for ripping? Thanks for the video

[@YsiloHago]

Yes I still use the fence normally, thanks

[@gabrielpachecogutierrez6488]

Muy buena su video maestro...aprendo mucho de usted...gracias....👍

[@susanaramirezhernandez870]

Qué práctica esta idea 'excelente trabajo

[@YsiloHago]

gracias

[@gilbertovaldivia7979]

Muy buena idea tratare de hacerlo siguiendo el tutorial

[@YsiloHago]

suerte, gracias

[@ramboIII3]

Gracias por tu video, es muy buena idea especialmente para aquellos como yo que empezamos en la carpinteria 👏👏

[@YsiloHago]

saludos y adelante

[@waylandyan2334]

Mucho Gracias!

[@jacksonianc]

Exactly what I'm looking for-thank you for the great video.

[@ElmerojavierOrellana]

Me gusta tu trabajo muy ordenando y pensado , bendiciones

[@jasonparker7686]

THank you so much for showing us this. very helpful.

[@ronaldhoward4215]

Best video I’ve seen on this subject, made it very simple 👍🏿👍🏿👍🏿👍🏿👍🏿

[@11redlan]

Me ha encantado el video Enhorabuena!

[@nonya5475]

Very Nice! Thank you. I may actually do this. You gave us a good guide on which to build our own!

[@muddywater6856]

I understand the Spanish better at half speed...excellent video editing!

[@YsiloHago]

Thanks

[@HappyPappynKatyTX]

No idea what you said but good build and good idea!

[@carlospoveda9170]

Excelente idea muy practica

[@tedfritsch3340]

Pure genius, simple, compact. I love it.

[@YsiloHago]

Thanks

[@samuka32]

Adorei a dica. Obrigado por compartilhar

[@franciscoflores7499]

Sencillamente genial, y las explicaciones "" de Primera "", grs

[@YsiloHago]

gracias

[@keithrocknrolls]

Brilliant video, I am sure I will adapt my Dewalt saw the same way 😀 Thanks for sharing

[@enriques7774]

Muy práctico amigo

[@josejoelaccosmunoa81]

Excelente felicitaciones

[@tommcdonald1746]

Drilling holes in the frame is one thing but I would immediately order a new fence for a spare.

[@franciscosergiogasparalons4908]

Para los que no entienden mucho del tema, la máquina no se debilita por unos simples agujeros..pero si quiero añadir algo, yo cortaría la tabla antes de agujerear y atornillar..es más fácil darle la altura exacta a la mesa y marcar para atornillar

[@0127asif]

Beautiful work I will try this great job

[@trentbever1370]

Very nice! great idea! Going to build one for my DW jobsite saw too.

[@the-art-of-drone]

Thank you, this is brilliant. Just the perfect design for me.

[@jdejpn]

Me gusto tu trabajo

[@YsiloHago]

Hola, muchas gracias

[@lucianopozenato3829]

Trabalho simples e excelente. Parabéns.

[@ruckboger]

Excellent idea! Thank you

[@drskvch5768]

Thank you sir, great project!

[@kevin072991]

Muy buena idea y video, muchas gracias

[@laurarios3431]

de donde eres? puedes fabricar uno para mi? tengo la sierra 7485 y un router inalambrico Dewalt

[@luisalvarez8266]

Me gusta que en este caso, el router es portatil al igual que la mesa sierra

[@werneryogelicotoboror1430]

Excelente trabajo

[@steve4157]

Wow. This is an awesome idea. Thanks for sharing.

[@Tools_Tips_How-to]

Great job. I'm going to try it with wing nuts..to remove since I have a table.

[@YsiloHago]

subs available now, thanks for whatching

[@larcomj]

I just found my next project...... Muchas gracias!!

[@timayscott8450]

Excellent job i am doing this thank you

[@LanceMcGrew]

Nicely done!

[@giorgiodicrosta7186]

Que bueno que lo hiciste! Te felicito muy buena idea. Saludos. Giorgio desde Milano

[@YsiloHago]

saludos

[@heru-deshet359]

Ingenioso mi amigo.

[@YsiloHago]

:)

[@robertovilches3096]

Deberias hacer referencias en milimetros solo en EE UU se usan pulgadas