Thanks for your help and guidance! Got my fog lamps (same exact fog lamps) mounted and wired up! Riding all the way in Marana, Arizona, USA 🇺🇸!
@BenelliTomTRK3 жыл бұрын
Thanks Steve am glad you got sorted mate love from Liverpool 🇬🇧
@ExpatsOn2WheelsКүн бұрын
This is interesting. I have the new 552x and the left side switch is for the high/low beam and the right side is for the hazard lights. The rocker switch on your bike thats used for high and low beam is now used to access the menu on the new TFT display.
@MultiOutdoorman3 жыл бұрын
Nice to discover how the extra switches can be used ... cheers !
@BenelliTomTRK3 жыл бұрын
Am so glad it’s helped you. Thanks for watching bro 😎
@jamiearmstrong73193 жыл бұрын
Thanks to this video I was able to get my lights installed today!
@BenelliTomTRK3 жыл бұрын
Jamie am so happy it helped you. Thanks for watching bro 😎
@sreedharbabu68043 жыл бұрын
Thanks for good explanation. It's helps me a lot with my 502X. 👍
@BenelliTomTRK3 жыл бұрын
Am glad it’s helped you bro 😎 thanks for watching ride safe mate
@plansdesigns53583 жыл бұрын
Very nice video, simple and easy to understand 🌸 lots of love from India 🇮🇳🙏🎉
@BenelliTomTRK3 жыл бұрын
Mate that’s so good of you thanks for watching bro 😎
@paullee53893 жыл бұрын
Very good at explaining 👏 oh and thanks for fitting my lights. Slightly different way to this.
@BenelliTomTRK3 жыл бұрын
Thanks Paul very kind of you bro 👍
@koalajs Жыл бұрын
Am i getting this right ? Sonyiu power up the Led fog lights fintrol bix directly from the 2 pin connector on the bike whichbis controlled by the aux switch and you shorted the on off switch cables so its always set as on. As you are turning the control box which is always on via aud switch?
@BenelliTomTRK11 ай бұрын
Hi am not sure it been a while since I’ve done this video. And you should be able to switch it off. Do they stay on even when the key is on off position.
@user-ii4rj7jy7q10 ай бұрын
Hi Tom my switch wires on loom from Ali are white blue and black 3 in total what ones should I join together ? If at all
@BenelliTomTRK10 ай бұрын
Remember to use your fuse . It’s hard for me to answer without being there . Follow the steps in the video. If you’re not sure use a power meter check the voltage on the wires this should help you
@oschneider7069 ай бұрын
Hi Tom.in the process of installing foglights.Have no electrical knowledge.My switch has blue,black and white wires.So do I just join the blue and black?Thanks,ride safe.
@BenelliTomTRK9 ай бұрын
Hi mate it’s been a while since I did that video. As long as you have a fuse on the lights. Put the wires together ( temporary ) And test it good luck. Stay upright 😎🤘🇬🇧
@sultanwot71522 жыл бұрын
Hi, thank you for the video. I just couldn't understand the part of the connection from the green/black socket to a battery. Would you please explain this more, Please. Thanks again
@BenelliTomTRK2 жыл бұрын
I’ll get back to you soon thanks Tom
@sultanwot71522 жыл бұрын
@@BenelliTomTRK Thank you ❤❤
@BenelliTomTRK2 жыл бұрын
Watch this video also this shows you how and where the wires go. kzbin.info/www/bejne/hmKxYaJ3h517r7c
@BenelliTomTRK2 жыл бұрын
Sorry I’ve not got back to you earlier. It’s just that I’ve got a lot going on in real world. Plus am still living in a hotel right now. So am sorry for any inconvenience or delay. All the best Tom 😎🤘🇬🇧
@BenelliTomTRK3 жыл бұрын
If you find my videos helpful and it’s saved you money. And you would like to Donate to me to help my channel grow my PayPal is MAHER923@HOTMAIL.CO.UK. THANKS FOR ANY SUPPORT.
@christopherbrunsden20812 жыл бұрын
great work and thank you
@brehh2 жыл бұрын
Hi Tom, looking to give this a go except on the right side. There seems to be 2 of the connectors, one slightly closer to the bars, one slightly further down. From memory would you be able to tell me which one to use?
@BenelliTomTRK2 жыл бұрын
You can use anyone of them both have power. The witch on the right side of the handlebars has a relay. Hope this helps Max. Thanks for watching bro. Stay safe and upright mate. Tom 😎🤘🇬🇧
@Royalinvensments3 жыл бұрын
I have watch the video, but one area I don't understand. Puluging that cable with fuse into the socket on the bike to power up the square module on the bike. But where do you plug end of each light cables to power them up?
@BenelliTomTRK3 жыл бұрын
Send me your email address I’ll talk you through it
@babaadv20232 жыл бұрын
Hi Tom thanks for this video, i have a question. Do you have any idea how many amps rated is the power being supplied by those vacant connectors? i read somewhere from the manual that is its only 2 amps but im not sure. Thank you!
@BenelliTomTRK2 жыл бұрын
Hi Steve 2 amps rings a bell with me also. Just to be sure use a meter to test it. Have a good one mate. 😎🤘🇬🇧
@kjaubrey48169 ай бұрын
Does anybody know what the amperage rating of the switch and the wires are? I will most likely run mine off a relay.
@BenelliTomTRK9 ай бұрын
It’s. So long ago when I did this video. You might have to put an amperage meter on it to see what it is mate. Sorry I can’t be more help
@kjaubrey48169 ай бұрын
@@BenelliTomTRK No trouble. Thank you for the response and the video.
@Hkmmotologs2 жыл бұрын
Is the extra switch connector factory wiring is fused or direct from battery? I mean is it safe to connect the lights (or control box) directly to the connector?.. I asked because if it is fused from factory, it needs to be considered what amp fuse is used so that the lights can be under that rating or change the fuse depending on the amp rating of the lights. I see you added an inline fuse from connector to the control box battery wires , is it because the factory wiring is not fused? and I assume the red and black wires you shorted are from control box and is meant to be the normal light switching wires from control box. I am asking because I am planning to buy trk 502x next month so I had some doubts on how those extra switch and the connector is wired from factory to see if I can avoid adding separate wire and relay directly to the battery and use the switched connector as trigger for relay as we usually do to add dual horns using relays:).. Thanks
@BenelliTomTRK2 жыл бұрын
Switch is 2amp led lights are low amp and low voltage Beneili makes this switch for this reason
@Hkmmotologs2 жыл бұрын
@@BenelliTomTRK Ok and thank you for the video and response first of all . So if I were to connect the lights directly to the connector it should be under 24W max right?.. if it is above then change the fuse to higher rating if possible?.. otherwise wire the control box (or relay) directly to battery with proper fuse and use the switched connector as trigger. Got it. Just wanted to clear some doubts on how it's wired before I attempt.. Thanks once again :)
@BenelliTomTRK2 жыл бұрын
The right switch has a relay. I don’t know of anyone who has had any problems using the left switch for fog lights. The switches only work when the Ignition is on.
@Hkmmotologs2 жыл бұрын
@@BenelliTomTRK ok.. thank you 😊
@thinneshmuniandy72002 жыл бұрын
@@BenelliTomTRK The left auxiliary cable has power? I've just installed mine. Right side works and left side doesn't work.
@theil6 Жыл бұрын
Tom pick up a tripod to video,
@BenelliTomTRK Жыл бұрын
Will do 🤘
@PrafulBhatkar2 жыл бұрын
Nice explaining.
@BenelliTomTRK2 жыл бұрын
Thanks for watching Praful stay upright my friend. 😎🤘🇬🇧
@baberwaldivers3 жыл бұрын
Nice 👍👍👍👍
@johnbarlow71842 жыл бұрын
Hi Tom, after being quoted £240 by my dealer to fit fog lights I thought I would do it myself but wasnt sure if I could. Watched your video and have decided I will, lights have arrived from Amazon and plan to fit them this weekend. Just one question, as the switch is not being used and just the black and red wire to be connected why did you not cut the wire short and connect the wires rather than run it down the length of your bike? would it not be easier (and tidier) to do this or is there a specific reason? Thanks
@BenelliTomTRK2 жыл бұрын
Hi john thanks for watching bro. Yes the reason why was the two wires are for the flashing function I didn’t want the lights to flash. And yes I think it would of worked just cutting them sorter but then I would have to retape the cable as it was 4 core and I only needed the two wires. I really do hope I can save you some money. Good luck bro all the best Benelli Tom TRK . PS PLEASE SUBSCRIBE 😎🤘
@George-yg3vw3 жыл бұрын
Tom did u disconnect your battery whilst fitting wiring for fog lights i’am doing mine this weekend and some other additions thanks
@BenelliTomTRK3 жыл бұрын
Hi George no I didn’t disconnect the battery. Thanks for watching bro good luck fitting your lights 👍
@George-yg3vw3 жыл бұрын
Lights went on great Tom thanks to your videos cheers mate 👍🏻
@Tsosmivlah3 жыл бұрын
hi my friend. can you tell me which fog lights are they?? where i find them??price? thank you. i have trk-x too
@BenelliTomTRK3 жыл бұрын
Hi Dimitris you can get them on Amazon. Or Ail Express. . Thanks for watching bro . Ride safe happy new year mate
@Tsosmivlah3 жыл бұрын
@@BenelliTomTRK which are exactly??do you remember?
@BenelliTomTRK3 жыл бұрын
Here’s the link www.amazon.co.uk/gp/product/B07S9XWJJT/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1