Repair | Benelli TRK 502 Engine Restoration.

[@willipine1863]

nice job, there are few very mechanics who does this job by the book. You did it all by the book.

[@davidg5501]

Pedazo de tutorial.enhorabuena👌

[@estebanberto7367]

Hola . Cuantos km tenia ese motor ?

[@turningwheels2584]

40 odd thousand by the looks of the odometer

[@johnduque1996]

Para cambiar un eje de la caja es necesario desarmar cabeza de fuerza o cilindro???

[@chrisv-l3835]

Thank you for sharing you knowledge.

[@dipen.nisar.autovlogs]

Have you come across any Benelli trk 502 which has dry clutch issues, basically the oil does not reach all plates and then with little careless use, the plates burn out

[@Yassinerider]

yes i have trk502 2022 and this is what happen with me

[@dipen.nisar.autovlogs]

@@Yassinerider did you find any solution

[@Yassinerider]

@@dipen.nisar.autovlogs still under warranty repaired by the after-sales service

[@dipen.nisar.autovlogs]

@@Yassinerider look up the vlogs, you will get all details

[@mbz4652]

​@@YassineriderWhat was the issue? How did they solve it?

[@luckylotus11]

after how many miles .... engine is getting rebuilt????? is it the same process for benelli 502c also???

[@BryanPorras-t6f]

Hi! I have a very noisy vibration at 4500 rpm; is it possible to get in touch? Maybe you could have some thoughts about what the issue could be…

[@ontwo-wheels]

Just watched this video. My TRK502 has a hard gear shift. The gear are hard to shift especially in slow speeds and sometime gets stuck especially when am at the stop light. They will shift with a 'hard hit'.What could be the problem? Shift star? It has only done 8,000km and I don't ride it really hard. It's been a bit frustrating.

[@trickzter6071]

Have you got your chain to the correct tension ? chain lubricated ? check for any gunk stuck in the gear shift lever and front sprocket. If all else fails bring the bike back to your dealership and have it inspected and repaired under warranty.

[@Yassinerider]

​@@trickzter6071 Bro, use an engine cleaner for 15 minutes before the oil change and original filter for one time use only, and use 100% synthetic oil. Come back to me with the results. Hope that helps!

[@mbz4652]

​@@YassineriderDid you find out?

[@arturoquan]

Y no la puede volver 700cc ó tal vez 800 cc?

[@andy-my9ue]

How many miles did the engine before overall?

[@ukaszczegoszukasz6629]

12.000 made in China 😅

[@ELGUAPOMOTO]

bro i own trk502X, thank you for this video. planning to rebuild my engine because of very noisy metal to metal internal engine noises. where you got the specific parts? like bearings, piston with ceramic sides, etc?

[@abandonedyuusha]

aliexpress,

[@9847894100]

How many kilometers run?

[@presidentbottle]

Why is it so damaged? oil circulation?

[@254lele]

42000 km and never change the oil

[@karlm1495]

@@254lele 🥶🥶🥶

[@Yassinerider]

@@254lele how did you know ?

[@254lele]

@@Yassinerider because engine crankshaft bearings didn't wear like this if u change the oil regulary

[@Yassinerider]

@@254lele not necessarily

[@darkshvein]

so new and already broke??

[@pepito19842]

Do you have remap?

[@wspracingteam27]

Nice

[@majidghafoori2186]

۲۰ اوکی 👍🤗

[@almircorreia2352]

👏👏👏👏👏👏👏👏👏

[@rockgsxr]

rebuild? they have only just made them

[@kamotebusher]

smallest engine for 500 cc😂