Detailed guide to making two types of sewer bases for your minis!

[@outofthisworldmodelsandmin898]

Those look amazing! They also seem very fun to put together. Hey, I just found your channel and subscribed. Can't wait to check out your older videos! -John

[@Prismaticsprayhobbies]

Thanks and glad you liked it. Just kicking this channel off but have some really fun stuff in the works right now, looking forward to putting them up in the next few weeks!

[@nixxy1983]

This is what I've been looking for to base my skaven, have a question though, what other things would you add to larger bases and to add variety to smaller ones? Happily subscribed too

[@Prismaticsprayhobbies]

Hey - these will look great with skaven! Some ideas to mix it up a bit - for larger bases you could buy some plasticard pipes and have some pipes running along the wall instead of a sewer grate and you could also do a few where the models are in the water vs above it to mix it up. For the smaller ones some pipes or 'in water' would also work but you could have some with lots of moss on them or some that are all cobblestone or others with small drains which you could achieve by just cutting a little hole in the cobblestone (or stick it right ion top and paint black in the center , maybe like a washer would work (google "hardware washers")

[@HellUmJom]

These look awesome! I've never thought of mixing AK enamels with resin, I've always been worried it would separate, but the results speak for themselves. The cotton bits also look great for creating the "motion" of the water.

[@Prismaticsprayhobbies]

Thank you! Yep I have never had an issue with the enamels and this resin (using AK resin). I have heard each brand is a little different though so I recommend doing a small test before using different resins!

[@Ernzt8]

Very cool techniques, love the bases!

[@Prismaticsprayhobbies]

Thanks! Glad you liked them :)

[@Kimtanashino]

The result is truly impressive, well done ! The trick is maybe to find some adequate molds before putting the resin. I use plastic sheets but it happens very often that the resin spills and it becomes a nightmare !

[@Prismaticsprayhobbies]

Thank you - yes totally agree I find molds are the hardest part. Even these greenstuff ones are not ideal as the bases have a slight angle and it leaks around the edges of the base, they are also quite shallow. I have a few more things for molds coming for my next project - stay tuned and I'll see if they work any better :)

[@Biscbob]

Great video!

[@Prismaticsprayhobbies]

Thanks for watching! :)