Detailed look at an Ecodisc

Ecodisc

[@nelsonahlvik6650]

I think its rather cute when the LCE displays "HELLO" on startup.

[@FortniteChapter3Map]

no it’s electric

[@Mr_ButterKatze]

@@FortniteChapter3Map thats not what he meant

[@SproutyPottedPlant]

wow this is the best video EVER! It must have been so awesome to be so close to that beautiful green Ecodisc and hearing the sound of that sweet, sweet PWM and brake ☺ The shaft is lovely and clean and bright too, Ecodiscs are the best!!! I wish we all got an Ecodisc under our Christmas trees next year.

[@benolifts]

+Knuckles the Echidna When I saw that the cabinet wasn't shut I was like YEEEEEEEESSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS!!!!!!!!!!!!!!!!!!!!!!!!!! The Ecodisc sounds very loud from on top the lift. I would also like an ecodisc as a present. I wonder how much just the ecodisc itself costs. An entire ecodisc lift 1m/s between 2 floors costs £30,000 (a Kone engineer told me).

[@SproutyPottedPlant]

+Beno I hope one day to win the lottery and buy a tall mansion just so I can call up Kone and have Ecodiscs installed :D I would invite all the lift enthusiasts round to surf them!!!

[@EALAJA]

ok

[@SproutyPottedPlant]

Still keep coming back to watch this, my favourite lift video :)

[@benolifts]

+Knuckles the Echidna I am glad you enjoyed it.

[@DieselDucy]

+Beno Please check your PM, would love to chat.

[@salifrtsalifrt3817]

+Beno where did you find it?

[@mattheww3116]

+Beno Does anyone know how long EcoDiscs are designed to last for.....cant find anything on it??????

[@peterlomas984]

+MatthewW About 6 months

[@upanddownadventures]

I'm guessing the "Powered by Kone EcoDisc" logo only lights up as an emergency light when the main lights are turned off.

[@nelsonahlvik6650]

Yes it does.

[@kalifts]

Fantastic video Ben! I am a huge fan of ecodiscs and this video is so interesting!

[@AlexL13487]

Your pic is ecodisc

[@Techno-Universal]

One of the fuse switches in the logic cabinet was probably a safety bypass switch that would bypass the safety and force the lift onto inspection mode whenever it’s active! :)

[@SummerADDE_Elevators]

Very nice video! I remember that me and my supervisor had to clean up stuff and fill some oil in a few 1st. gen ecodiscs my company took care of. Altough we had the keys to the logic cabinet, he couln't figure out how to control the rooftop for some reason, as all theese elevators there had a protection against low top and low bottom, that needs to be resetted with a button on the shaft pit as when you open any shaft doors and breaking teh circuit. very wierd. (Elevators fitted with low top/bottom protection seems to be very hard to control in service mode, and hardly starts into service afterwards... but that is an swedish requirement)

[@MitsubishiGTO]

*Monospaces with Delta/Sigma fixtures

[@crazydogeROBLOXBuildingandGame]

I love eco discs too!

[@oliviaalwen2142]

0:54 lol sounds like a huge bee

[@theelevatorenthousiast-452]

Again a very nice vid Ben!

[@niprbmw_210]

Ive been in an 2nd gen ecodisc from 2007 and its really awesome. I like these lifts better than the GeN2

[@ShashankArv]

I have 1st Gen EcoDisc from 2001, working really well.

[@EALAJA]

yes

[@MitsubishiGTO]

You mean a MonoSpace with Sigma or Delta fixtures?

[@atlanticpacificocean]

I ❤ ECODISCS!!!!!!!!

[@elevcan2312]

I agree

[@afurgeustglocke5071]

I love schindler 3300a and 5500a

[@ProElevators383]

Same

[@cubius4382]

I also ❤️ ecodisc

[@MitsubishiGTO]

*MonoSpaces EcoDisc is the motor

[@AlexL13487]

I love them i love the brake the big sound it makes

[@cheikhdiouf5049]

Beautiful ecodisc

[@DieselDucy]

I totally agree with what you said about the ecodisc motor...

[@ccityplanner1217]

Churchill Gardens Porn & Dunwoody lifts come in sets of 2. Each set has a small-medium-sized lift which stops at all floors & a tiny lift which only stops at floors which are multiples of 3.

[@ShashankArv]

Mind your mouth please. But good information.

[@ccityplanner1217]

@@ShashankArv : You known what I mean.

[@m4acollects]

its the branding @@ShashankArv

[@kARTechnology]

How to make my latest get ecodisc open doors just before levelling like on the video? Which time delay to adjust?

[@Nicsou77]

Love that chime

[@IlTransistorSelvatico]

In my house I 've an kone ecodisc for 10 years now it has never stopped.

[@bossjolencraft3010]

5:55 toshiba always do this jolt, sometimes before the lift fully close its doors which makes it run as soon as the doors close, and i found one with complete intelligent leveling. If you open the doors after the lift jolts, it will relevel when the doors fully open. Just like a 1980s kone lift i found.

[@bossjolencraft3010]

+CraftHunterGaming - Minecraft & More ! (CetlicHunter) ..... are they generic? ONe uses dewhurst button

[@bossjolencraft3010]

+CraftHunterGaming - Minecraft & More ! (CetlicHunter) MRT? KONE MOTOR???

[@idl3k_elev]

I've seen some Toshiba MRLs in Singapore MRT stations using a motor that looks very similar to EcoDisc!

[@benjaminleosadventures572]

Same. My apartment lift another block keeps jolting before the doors close fully. It malfunctioned one time when the door opened, it went out of service. PS: it’s a 1999 toshiba

[@benjaminleosadventures572]

@@idl3k_elev they might be either space iii or spacel mrl

[@PiotrLenartowicz-Pitoras]

Beno. Can you use the map panel to launch floor announcing and gongs?

[@JoshCraver9000]

The Ecodiscs in North America are so glitchy!

[@bossjolencraft3010]

+JoshCraver9000 THe ones in Singapore are not, but America seem to have problem. One time, it wants to go down, but it jolted above the top floor, then the doors opened, and wouldn't close anymore.

[@indotravelguy2004]

+CraftHunterGaming - Minecraft & More ! (CetlicHunter) BossHeins is also a minecraft person, well I am bossheins, but I switched account to my lift account. I might have to change some of my videos as some is impersonating (is that the word?) beno.

[@EWPA14]

BossHeins Craft Are you talking about the 1 JimLi filmed?

[@indotravelguy2004]

yeah. also some other people complained about some other ecodiscs being bad in america. i dont really know though

[@explodingbrick9544]

I live in North America and I’m never seen an eco-disk I live in Maryland

[@imeakdo7]

did you know theres a variant of dvd called ecodisc? its thinner and flexible.

[@SproutyPottedPlant]

I wish they came with a free hoisting machine and fixtures **cries**

[@mikesullivan3836]

That's the same with the lifts at Hyatt place. There is a keypad, but on the ground floor you can press door open.

[@PrestissimoMasterStation]

*CONGRATULATIONS!!!!!*

[@dinhtuan752]

Nice

[@idl3k_elev]

Thank you

[@tom888252]

Excellent video Ben. Tempted to find my triangle key and open a lift up but too worried about getting in trouble

[@bossjolencraft3010]

+Tom Bowell unless there are no Cameras

[@londonbusexplorer]

+Tom Bowell Just surf it mate, has he ever been caught? Only once, so you should attempt it.

[@benolifts]

+Tom Bowell A**ders car park is good for some lift experiments. There are no cameras on the top floor. These ones are quite easy to open up. The doors have the drop key mechanism but are fitted with triangle key (no drop key required). The triangle key turns around the pin that hits the drop key mechanism. So to start with it feels like it isn't doing anything until you turn it so far and it hits the unlatcher. These lifts go out of service if you open the door while it is moving (it comes back into service after 20 minutes or if you switch the car top switch to inspection then wait 10 seconds then turn it back to normal). This place is very quiet so its a good place to experiment (be careful about the long drop when the lifts down the bottom). As for lift surfing, thats your own choice. I don't encourage people to copy what I do. If you do want to lift surf then make sure you fully understand whats involved.

[@AlabamaElevators]

+Beno you should ride lifts/elevators in the USA

[@lbenk-topic]

@@benolifts what happens if you safety break a kone monospace with a triangle key while it‘s moving

[@crazydogeROBLOXBuildingandGame]

dose the left hand ecodisc have a button on the floors that it is not sapost to go to?

[@indotravelguy2004]

no. suppose*

[@LBSiUK]

Go back to that place and enable pre doors on that lift! You could make a tutorial on how to enable pre doors on EcoDiscs.

[@BenDeSwert666]

Simple: there are 3 digit groups on the control panel: "menu" "submenu" and "value" you can use the buttons to navigate through the menu. To enable preopening doors, navigate to Menu 1, Submenu 12 and change the value from 1 to 2. :)

[@MitsubishiGTO]

*ADO *MonoSpaces

[@mroofer8451]

+ cool vid

[@MusicVidsAT]

12:20 Rly no limiter there? What if the inverter has some damage? Theres no mechanical safety switch that turns off the main conductor?

[@Otiselevatorfilter]

And in the Metrocentre in Gateshead there's an Eco Disc near Debenhams.

[@haz05-06]

Yay!

[@teravolt1195]

what's the heaviest load rated ecodisc you've found? A building at my work/shipyard has two ecos each rated 2500kg, that's a lot for a lift! they both are double door and have a sign "POWERED INDUSTRIAL TRUCKS SHALL NOT RIDE ON THIS LIFT". we use Taylor Dunn's and it's very tempting to drive one into the lift hahah! yes there is enough space 2008 installed 3rd gens

[@TheDragonFire123]

4000 kilograms/53 persons (TranSys)

[@BenDeSwert666]

@@TheDragonFire123 exactly. Powered by the great MX35 ecodisk. Much greater than this puny MX05 :D

[@dinhtuan752]

u mean mx40 or mx100

[@dykodesigns]

Great video! Is it normal for an ecodisc to park on the groundfloor with the doors open when it's out of service? I've filmed an ecodisc once in my local erea, and one day it was out of service. It was parked on the groundfloor and the doors where open. Cab lights where on. Interessting to see that Kone still uses ropes, where Otis brags about their flat belt technology along with a wear reporting feature. I know of a small (semi-generic) company in the netherlands that uses an otis gen2 motor. Turns out that they are a company taken over by Otis and are marketed as a cheaper alternative. Somehow I get the feeling that Otis wants to position them selves as a "posh upmarket" brand.

[@benolifts]

+dykodesigns2yt If the logic detects a fault it opens its doors, maybe it was on ground when the fault occurred, or it was moving and ground was the nearest floor to return to in emergency rescue mode. I am not convinced by Otis's belt cables. With the ecodisc, belt cables would not work. Ecodiscs have 2:1 cabling. When the cables go through the wheels under the lift they are along across the lift, but when the go around the motor they are perpendicular to the lift. From the lift wheel to the motor the cables are twisted. Belt cables would not like this. Otis often use the names of companies they have taken over for their cheap lifts. Otis under their own name want to look posh but they install 2m/s lifts with no chassis into 100 meter towers, which is very poor for a company like Otis.

[@salifrtsalifrt3817]

+Beno hey where you got this ecodisk

[@salifrtsalifrt3817]

+Beno hey beno please surf one monospace lift 2015 if you find that please surf one of that

[@cameliabarbu9378]

Beno, wut means that noise from the right hand side ecodisc?

[@rai.shraavan]

Even I experienced the same . The controller didn't work.by luck we had a ladder in side of the wall and then we climbed it and opened the lock 😂. By chance if the controller don't work and so there is no ladder remove it from inspection mode and put it to normal service where so it would go to the nearest floor when we are able to reach the lock near the controller we can press the stop or jerk the elevator by moving the lock near the door. That's the best way how you can come out if spoilt controller in an elevator

[@woodsmic]

The travelodge I just stayed at in London has an ecodisc and two non-ecodiscs next to it. Very wierd.

[@kriskolo2013]

Since Kone started producting 4th gen Ecodiscs, you won't get any lift with an awesome clunky sound.

[@benolifts]

+kriskolo2013 I wonder what it sounds like when surfing it. They start and stop much rougher in inspection.

[@TheDragonFire123]

It seems the fourth generation EcoDisc comes in different sizes; smaller ones don't have the clunk, larger ones do, but all have the same motor sound.

[@ShashankArv]

@@TheDragonFire123 Larger 4th gen EcoDisc ix MX20+. Smaller ones are NMX11.

[@lerem12]

how you got all those keys

[@CrazyPlayer-pf2hv]

8:53 Why does it say "THIRD FLOOR" despite displaying Floor 1?

[@lucabarras]

if you like kone ecodiscs so much, then you should come to the cornmill shopping centre in Darlington, county Durham, UK

[@miahaskurti4539]

The Kone Ecodiscs At Bentalls Centre Car Park Kingston Are Different. The Pair Of 2 Lifts On The Right Stop At Even Floors. The Single Lift On The Left Stops At Odd Floors. (Additionally Stops At Floor 0, Floor 8 For Link Bridge To Shopping Centre. And Level 12 Top Floor)

[@blue.light.fazbear]

Ecodiscs and Mitsubishi MRLs are by far the best lifts you can find

[@calvinkulit]

DJJack 1229 gen2?

[@daredevil3744]

EcoDiscs are the #1 lift in the whole world!

[@daredevil3744]

I also love Gen2s because they are traction lifts.

[@ShashankArv]

@@daredevil3744 Otis, Mitsubishi, and KONE are competing with each other. Even ThyssenKrupp.

[@PersonalUseOnlyEEEEEEEEEEEEEE]

Nah Any lift is good if it has character Mitsubishi make shit, bland lifts

[@miahaskurti4539]

My Favourite Lift Is 3rd Generation Ecodisc

[@TheeSurfer]

There’s a guideline in ashford shopping center which opens its doors before it stops

[@liftmaniani2087]

Loud motorbike!🏍

[@Otiselevatorfilter]

I think an Eco Disc Motor is awesome as well.

[@meol0390]

This is memes! I remember, I live in Sweden so they had English in the lifts when they were first installed, but they got Swedish recorded and I was destroyed😢😢

[@moayandere54]

Meol 03 ja det va så himla tråkigt

[@LiftEnthusiast2020OFFTOPIC]

Is this a 3rd gen ecodisc

[@vinchenzo6845]

hey Beno have you ever seen a ecodisc with dewhurst inside and out?

[@benolifts]

loads

[@bigsmoke9100]

the ecodisk at my apartment says its going up but its really going down

[@xavier6130]

big smoke Did they install it upside-down? XD

[@lbenk-topic]

Why does the ecodisc never show the right floor number and switches much earlier

[@tubeandlifts1909]

Why do some ecodisks don't open the door before it stops?

[@LiftsInGermany]

cause the engineers are idiots and they dont know how to enable pre-doors

[@tecnologiaconrodrigo9791]

I love ecodisc and schindler m-series

[@awesometrainsandbuses]

KONE's best Lift

[@Nicsou77]

Hello Ecodisc XD

[@GabeThePlushieKing2K8]

4:27 "Out of Service" at 6? That is just sad for me...

[@That_Lad_George]

yay

[@daredevil3744]

Otis Gen2 lifts have some character...

[@MitsubishiGTO]

I actually quite like Gen2.

[@bossjolencraft3010]

did the lift engineer accidently jam the cabinet lock and cant open it again while forgot to turn on shaft lights?

[@benolifts]

+BossHeins Craft They were probably in a rush to service as many lifts as possible, so they forgot about the lights.

[@miahaskurti4539]

There Is One At Eldon Square Street

[@Bombiedude.]

I personally find it wierd how since theyre are not a set theyre not on the same controller so they have the 2 seperate call buttons

[@blessingmatadi193]

in 2 group practices there is a ecodiscs in the group practices

[@smg3tvwhowantstobeamillion430]

I love the chime heh heh

[@ShashankArv]

KONE is a Finnish elevator company and very popular in many European countries like the UK, even countries all across the globe. Their elevators are well-finished, energy efficient, and much more reliable than any other Generic British-made elevator.

[@PersonalUseOnlyEEEEEEEEEEEEEE]

Bruh There is a local Lester that is never broken near me But there’s an absolutely fucked Monospace nearby

[@themoderndaytravelnerd2694]

Ben, is that a Premier Inn hotel and if so where is it? Cracking video by the way

[@benolifts]

Yes, they always have ecodiscs

[@themoderndaytravelnerd2694]

Beno which Premier Inn is that

[@themoderndaytravelnerd2694]

Ben where was this specific Premier Inn because I've stayed in countless Premier Inn hotels and a very few minority of them had ecodiscs

[@meol0390]

How do you get the doors open? You never shows that I think

[@xavier6130]

Meol 03 Uhh... Triangle key?

[@xavier6130]

Meol 03 Hope I helped...

[@kriskolo2013]

Actually, many ecodiscs do not open them doors until the complete stop. And I've also discovered that stupid way of securing staff only floor in the ecodisc in Poland.

[@daredevil3744]

Beno and me: Let's replace everything with EcoDiscs!

[@indotravelguy2004]

0:52 Listen very carefully and you can here that bike sound which isn't very loud. speaker up then you'll know what I mean.

[@aaaaeeeeffffeeeekkkkssss]

Where was this filmed?

[@bossjolencraft3010]

I think they stop violently because of those brakes, those breaks even sound (clunk screeeeeeech clunk) But tell me if im wrong.

[@elevatorfan-cq1su]

Sadly here in America, the ecodiscs are either beaten up and not well maintained or well maintained (seemingly) and glitchy.

[@kARTechnology]

How did u enter the car top? any secret command on COP? the door opened automatically for u to enter?

[@benolifts]

There are no secret commands on the COP. The doors can't open when the lift is not there as they are not motorised.

[@kARTechnology]

@@benolifts oh

[@kARTechnology]

@@benolifts I have a Kone EcoDIsc with 5 Landings, the latest one.How can i get service manuals for that? like adjusting door speed, force sensor, etc and other options..I have not been given any reference :(

[@kARTechnology]

@@elevator_satellite how about enabling advanced door opening any new additional hardware required?

[@kARTechnology]

@@elevator_satellite okay I'll check it now.

[@Otiselevatorfilter]

KONE is awesome.

[@Simonhdude1]

You need to calibrate those brakes, so they are tighter when realesed, not many ppl know how to do it.

[@benjaminleosadventures572]

Can you shut off the lift power while it’s moving please?

[@benolifts]

I have done that loads of times. The lift just emergency stops. I have done it a couple of times while holding the brake open which can be weird. Although modern day lifts have a dual mode governor which would trip.

[@benjaminleosadventures572]

@@benolifts and now lifts have a system called ard automatic rescue device

[@benolifts]

Electronic brake release is dangerous in my opinion. On multiple occasions I have found lifts where the little battery gen2 lifts where the software glitches and it wont release the brake. There is nothing wrong with a good old fashioned bike cable to release the brake. It does the job perfectly and does not rely on electronics. Even with dual mode governors, a bike cable does the job fine, there just has to be a warning on it to set the governor to allow movement before pulling the brake release.

[@tobiaskerestes1079]

Where these Ecodiscs are?

[@jaspertaylor156]

the list about good things had the the same number of the floor on the lift

[@bigsmoke9100]

also if I hold the call button down it gows beeboobeeboobeeboobeeboobeeboobeeboo

[@Bombiedude.]

0:54 lol that motorbike sounded like a very quiet cow

[@oliviaalwen2142]

are any type of a gen2 lift an eco disk?

[@benolifts]

No

[@oliviaalwen2142]

oh fair is fair as i know now lol

[@waketurbulence15]

Thank you for your reply , really appreciate it , As per your advice I approched KONE they offered me i MonoSpace model . Now Schindler 3300 is giving me band cable vs Kone giving steel cables , Schindler 3300 giving 750cm of door opening with telescopic doors with 6 passengers, kone with middle opening doors with 700cm with 5 passengers car . As advised by you I have dropped the plan to buy otis gen2 nova model . What you think is a good option and technology wise and quality wise , which one to buy.

[@benolifts]

I personally do not see the advantage of belt cables (that otis and Schindler use). I do not see that they improve anything over regular cables, it is like they solved a problem that didn't need fixing. I find belt cables to be very bouncy if used in tall buildings. Ultimately I would say that all of the cheapest models of lift designed for a few floors and go 1 m/s are not that well built. If you want a good lift then get the next model up rather than the base model, but this depends on how much you are wanting to spend. If you are only wanting to get just the base model then Kone is the best. Kone have made more innovations than any of the other companies. The cheapest Kone model is slightly cheaply built, but it is better than their rivals. It is hard to know what to advice without knowing how fast you want the lift and how many people will use it. A Schindler 3300 looks very posh and is ok in a building that doesn't get much use. This is the model of Kone that you would get unless you spend money on a more expensive one kzbin.info/www/bejne/b6DXm2tubq-am9E Look at the very start of this video to see what is holding up a Schindler 3300 cab kzbin.info/www/bejne/nJatgXyobLZ8Y5Y Both the Ecodisc base model and the 3300 have cheap doors. It will be the doors that cause the most breakdowns on these (and pretty much all lifts apart from expensive ones). Also, what I am saying is relative. Lifts in the 1960s were much better built, and premium modern lifts are better built. But there are many lifts that are far worse than 3300 and Kone ecodisc. There are so many cheap lifts nowadays. You won't find a lift better than Kone within the low rise market. So unless you want to pay for a mid-range lift then you won't find a lift better than Kone. If you are wanting a mid-range lift then look at Schindler 5500, Mitsubishi MRL, and a mid range Kone. Kone keep changing their monospace packages, so I don't know what is included in each one, but you would be looking for one with heavy duty doors and a full chassis around the lift cab. Mid range lifts will be a lot more expensive than a cheap lift.

[@waketurbulence15]

One last Help , I have short down to OTIS GEN 2 Nova , as it is cheaper than Schindler 3300 . Kone monospace is using ropes is a between otis and Schindler price wise . Is my choice otis gen 2 nova good ?

[@Subway2400]

@@waketurbulence15 From my experience the modern Otis Gen 2 are not reliable at all... I know some from different new buildings and they all are cheap, they have several breakdowns per year and have a poor ride quality. They would better improve their lifts instead of putting big LCD color screen in the cabin ...

[@daredevil3744]

EcoDiscs are the lifeblood of a well-run lift.

[@flintytheraccbold]

why do the doors have counter weights

[@BenDeSwert666]

They have to be self-closing. required by law. It's a safety thing. If the maintainer opens a door, it should close by itself it he lets go. That way, you prevent dangerous situations where a door is opened unattended, leaving a gaping hole, making you able to step into it and fall down the shaft. The weight in the door is connected to the door panels in such a way, that if it goes down, it pulls the doors shut.

[@ShashankArv]

EcoDiscs are the best elevators in the world!

[@SirenenNRW]

lol Hello Ecodisc xD

[@jp-alarms]

It’s a monospace ecodisc is the motor

[@benolifts]

Nope, it is a Ecodisc mk 2 base model chasisless edition. Model number ECO2-001-LCEmk2-H73D

[@mrdingus11]

@@benolifts no you are wrong ecodisc is just the name of the motor and the actual lift model is called Monospace

[@MitsubishiGTO]

Speaking from experience, you’re talking about a MonoSpace 500. Not a second gen EcoDisc, because that’s the motor.

[@tomjardine100]

Are kone lifts reliable.?

[@TheDragonFire123]

Quite.

[@germanlifts5960]

Do you know what the error codes mean? I just know that Number 21 mean that the safety is broken (Emergency Stop Button, Door..)

[@benolifts]

+German Lifts Lets see if I can find a Kone logic instruction manual online.

[@germanlifts5960]

+Beno That would be nice

[@germanlifts5960]

+Beno I find this 104.131.164.192/kone-monospace-error-codes-manual-pdf-download.doc but i can´t open or download it :(

[@germanlifts5960]

+Beno I FOUNS IT! YESSSSSSSSSSSSSSSSSSSS!!! www.lift-spare-parts.com/Elevator-Parts-List/KONE-error-code-Failure-reason.html

[@germanlifts5960]

+Beno Also i found this de.scribd.com/doc/68310435/AM-11-65-022-V3F16L-Troubleshooting#scribd

[@PhuongTran-if9vh]

YOU WIN AN ECODISC!!!!!!!!!

[@PhuongTran-if9vh]

FLORIDIAN ELEVATORS HATES IT!!!!!!!!!!!!!!!!!!!

[@DatamasterCorporation]

The person riding in the lift farted 13:54

[@hubzcaps]

how u get out when u done surfin ??

[@LiftsInGermany]

by opening the door

[@m4acollects]

@@LiftsInGermany Grabbing the rowller

[@crazydogeROBLOXBuildingandGame]

i was out last night and i saw the same ecodisc in this video and it was turnd off because it was broken and i presst the butten and it came but in the lift nothing works so i all most got trapt

[@DylanA1S]

i did this at college and everyone was like wtf its not working

[@SproutyPottedPlant]

I keep getting KZbin reply emails with Salifrt Salifrt wanting to chat with Beno and then coming here and they are not there! What the?

[@benolifts]

+Knuckles the Echidna You should see how many times he yells at me to talk to him on hangouts. Since getting back home from 4 days in hospital he has sent me over 100 messages getting cross at me for not talking to him. I will ask him to not leave video comments because if I am not at my computer then its not possible to talk. Also he has been asking me how he can surf a lift in his block. After talking to him for a while I realised that he wouldn't be able to do it safely. When I told him it wasn't a good idea to lift surf he got mega angry with me. I enjoy talking to my subscribers, but this has got out of hand.

[@SproutyPottedPlant]

+Beno Aaaah I know the feeling, said the wrong thing (accidentally) to someone with depression on a website about the classic Amiga computer once, quite a friendly thing it was (or it would be to most other people) and got MEGA amounts of angry messages! This channel is great because it means we can see the lift workings without risking a surf ourselves :D

[@danielbtdm]

0:52 lol

[@scottsliftsX1]

5:41 please explain this in more detail

[@crazydogeROBLOXBuildingandGame]

Are Ecodiscs rear?

[@benolifts]

+the minecraft masters nic & aldo Ecodiscs are common in the UK

[@crazydogeROBLOXBuildingandGame]

+Beno in my part of the uk i dont see alot of ecodiscs