So I've only used this pressure washer one time. kzbin.infoUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP The one time I used it, it worked great. I recently had new siding installed but kept the old gutters and small areas surrounding my house that weren't replaced so they looked horrible and dirty because of the new siding. I needed to get it cleaned asap. When I used the pressure washer, man it just melted all the dirt and grime that was on those areas of my house. I used that krud kutter soap and it was over after that. Easy to assemble, feels durable, very simple to use. Also, I purchased a used one to save money and there was absolutely nothing wrong with it. I want to get more use out of it so I think I'll be washing the cars and update this comment as time goes on.
@ReadySetElement2 жыл бұрын
I always take Joshs advice. He literally encouraged me start my business a few years back by his realistic process for detailing cars. Stay awesome brother!
@TheRealSkiMask2 жыл бұрын
How’s your business doing?
@tioswift36762 жыл бұрын
@@TheRealSkiMask - Closed up shop last week
@b4mbootv595 Жыл бұрын
@@tioswift3676 why
@B-DINO5 ай бұрын
I agree...but he always changes his mind. One video he'll say something is his favorite and then a couple videos later he'll pull out a different brand or different method and say something different is his favorite.
@JoeGalanteTribute2 жыл бұрын
Great to see that you are aware of the other KZbin videos that may contradict your suggestions. Your explanation of why prewashing can be good or bad is spot-on.
@subzeroRLclips11 ай бұрын
Spot-on lol
@thetacticalape88522 жыл бұрын
Pop up canopy can provide some shade and aren't too hard to set up.
@LarryRichelli2 жыл бұрын
I have a carport but I can only wash at noon or after the sun goes down if I don't want any sun on the car when washing
@thetacticalape88522 жыл бұрын
@@LarryRichelli True, but you can move a canopy to create shade.
@lulop0228822 жыл бұрын
I use the exact same electric blower to dry my full size truck (pain in the to detail) A trick I learned was to hold the blower upside down, and use the same force of the blower to actually hold it up. You may have to tweek where on the handle you hold it, but when you get it right almost seems like the blower is floating and you control the position by just moving your arm. It’s saved me from having to carry the whole weight of the blower. Works wonders when drying the roof of the truck, I literally hold the blower over my head. Great videos 👍🏻👍🏻
@shepardsmith32356 ай бұрын
I have a pro air drier with an air squeegee tip . It blows all the water off and leaves an absolute mirror finish but it does take some time. The key is that periodically I use bead up to put a mirror finish seal on the paint job and I do this to the wheels too. The pro dryer is perfect for the wheels and does a perfect job of getting it all off. I do this every two months or so, so the finish is truly a mirror finish. I should add both my Tesla"s are ceramic coated. Once you have the mirror finish the water droplets will literally run off once the powerful air squeegee gets near those droplets.
@JimV902 жыл бұрын
I like to dry using only a leaf blower. Good results and touchless.
@davestewart91462 жыл бұрын
Awesome tips and technique, unfortunately for me being almost 60 years old and a disabled veteran I definitely don’t have speed on my side lol, I just need to invest in a spotless system, thanks Josh 👍😁
@marketeermik2 жыл бұрын
Washing in the shade makes a WORLD of difference. If anything, wash in the shade early or late in the day.
@StaySlick2 жыл бұрын
Thank you for your service Dave.
@davestewart91462 жыл бұрын
@@StaySlick you are welcome 😁
@BenTheAVGNFan2 жыл бұрын
Thank you for your service sir 🇺🇸
@Brian-dj3ru2 жыл бұрын
Rinseless wash with distilled water and you're golden
@stevelangsdorf7307 Жыл бұрын
Dude you are the most real auto detailing U tuber I've watched Ever good info fast clear speaking, your not into how to make more money faster your into how to do a good job and give the customer their money's worth, THANK YOU 👍💯 MAD RESPECT FROM EAST LONG BEACH ✌️
@tx49er9562 жыл бұрын
Dang. Most informative video on quick wash . I live 20 mins from Mexico in south TX. Sun and heat 75 % of the year. This is how I wash my car. No swirls or water spots on my new car for 18 months going strong.
@lulop0228822 жыл бұрын
75% of the year, I’d say more like 95%. Im in the same area. I wash one section at time, unlike the video. Everything else in the video ironically I’ve learned in the 20 years of detailing my own cars. The most important, in my opinion is to keep the surface wet. So as I’m washing each section I’m always keeping the prior section wet.
@Aswaguespack Жыл бұрын
My municipal water is very hard with lots of minerals. So this video “hits the spot” and helps provide the necessary details to help deal with very hard water. Great suggestions. I’ve been using a blower to dry my vehicle and it helps. Spotting has been an issue in the past but since I got a pressure washer and foam cannon my wash process is faster and the spotting is much less of an issue. In Josh We Trust 😉
@dutchtech2 жыл бұрын
Yes, the hot sun is an enemy of the professional detailer as well as the novice. Your step by step instructions on how to overcome this problem is well thought out. Great info tutorial. we all learned great advice from your video. Thanks
@drbonefish8 ай бұрын
I've been using the Technicians Choice after washing the truck as you recommended, I can not believe how awesome this works and what a shine and smooth the truck feels to the touch. Thanks Josh
@P4SDetails2 жыл бұрын
I commend you for washing in direct sunlight. Doing that and getting a spot free Detail is a challenge, but not impossible. Great work bru
@shogunrua10405 ай бұрын
Thank you for sharing your knowledge. Nice to see a professional at work and learn from. I feel more confident now with my car cleaning.
@enriquepatron75532 жыл бұрын
Could you do a video about drying aid please? What it is? What product is good? And if it’s necessary if you already have di water and if you don’t have di water?
@sfret1 Жыл бұрын
When I think wanting to have a spot free wash that means I don't have to drive the car. Your technique was good as my father taught if that way.
@riceburner47472 жыл бұрын
Great advice! I'm a senior (who moves like molasses on a winter day) 😂🤣 but thats EXACTLY what I do! Its jst common sense. Thanks!
@arrozconmgtow50264 ай бұрын
Also-also for concerns regarding your drying towel getting impregnated with a drying aid simply use a smaller towel and dunk them in a bucket of rinseless wash for a few minutes as soon as you're done. This prevents those bonds from forming and essentially allows you to wash the product off cleanly when you next do a load of towels. You can thank Yvan Lacroix for that little gem. My towel replacement costs have shrunk dramatically since I stopped pitching towels after every car which means more money in my pocket.
@mnmn1665 Жыл бұрын
Excellent. Thanks. I've been using the On The Go System for 5 years now. It's perfect. I'm on my original set of resins.
@douglasmccowen272 жыл бұрын
Can't help from saying how good you are at giving great instruction.
@andyaslamazashvili46614 ай бұрын
Hey Josh, Why not use a long handheld soft brush for contact wash instead of microfiber towel ? That's way more convenient than a towel.
@ctt48112 жыл бұрын
Great tutorial Josh! Ive ordered a few of the products you’ve recommended including pressure washer. Now that i can turn the outside water spicket on. Winter here in RI its off all winter.
@imjoshv2 жыл бұрын
Thanks! Yes I forget how extreme weather can be in the winter. People have asked me to do videos about removing salt and other things like that, but I have no experience with it
@GtownTX152 жыл бұрын
I lived in North County for 7 years and never discovered you. Damm, did I miss out! Great content man.
@hookandlateral12 жыл бұрын
Have you thought about making a drying aid test like you did for the towels? I think that'd be interesting
@cynthiaenglish27362 жыл бұрын
Good suggestion @HookandLateral I’d be interested to see some of the dedicated products that are marketed as drying aids like OG and Koch Chemie; I’m sure there are others.
@CORZER02 жыл бұрын
Josh, I just wanted to say thank your for the videos. I subscribed to your channel a while ago and have just learned so much. You have been a huge help. Rock on!
@YouGotPropofol Жыл бұрын
Damn that huge towel was great. Hardest part is always frying. You made it look easy.
@nikkiau12 жыл бұрын
Well now I know why my wooly doesn’t dry that well. I did use a drying aid that had the chemicals you mentioned. Thank you for the video and your expertise!
@60trickpa2 жыл бұрын
good tip on which side is in the sun. I make that side my last section to rinse off plus keep spraying water on the shaded side. I have found good results from just letting the water free flow from the hose with no spray nozzle on it I find the water tends to flow off the vehicle better. Thanks for the great videos always good stuff
@marketeermik2 жыл бұрын
100%. Putting your hose nozzle on “flood” will encourage the water to pool, and sheets off wonderfully.
@jefffredriksz11162 жыл бұрын
One of your best videos in which you make some valid points and key suggestions in your approach to dealing with this issue. However, moving forward, this is why I could never understand why so many people get excited with surface protection products that beads. Water beads are water spots that haven't yet dried. And obviously, we all dry our vehicles after the final rinse, so why would anyone want any water to remain on the vehicles surfaces via beading?? Wouldn't you want less water to remain, thus less to remove via beading? Products that offer sheeting characteristics in my opinion, are far more desirable. Less water to remove saves time (and money in this case) as well as preventing water spots to begin with. Just because a product doesn't bead doesn't make it less effective when it comes to surface protection. When you think about it, the sheeting action is just another key benefit when it comes to surface protection.
@KlockoFett2 жыл бұрын
That Forensic Detailing video was interesting. Even in direct mid-summer SoFL sun, I have at least 5 minutes to let foam dwell before it starts drying. Maybe not ideal for a pro who needs to finish and move on to the next car, but I'm only doing 1 a day. I do however usually give up on rinsing with the pressure washer and just grab the hose with a sprayer nozzle. All connected with QC's and a shut off valve on the end of the hose so I don't have to run to the back of the house to kill the water for that change over. Life changer.
@mistamfmike81952 жыл бұрын
It is true that pre-rinsing cools the surface a bit, that's why most wheel cleaners say to thoroughly pre rinse wheels if they're hot before applying the chemical
@arrozconmgtow50264 ай бұрын
Pan did a similar pre-rinse yea/nay a couple of years ago to the same end determining that it didn't really matter either way which was surprising in and of itself. I do remember that the study vehicle was black. I think for the sake of efficiency skipping the pre-rinse is the way to go since it often doesn't really matter. If your customer is the type of jerk that brings you a vehicle still dripping mud...well...then I guess you might need to knock off the bigger chunks first. I'm toying with adding a step where a customer would pass through an auto-wash for 12 bucks before hitting my shop. Maybe give the customer a break on the overall cost of the detail if they have to pay for a wash first...maybe not.
@bubblebutt4201 Жыл бұрын
Wow this is like exactly how ive been washing my cars just got to upgrade to pressure washer and i like the bucket full of rages idea thats cool but ya make sure you go back rins to keep panels cool and wet is key and i like your drying techniques with the ceramic and blower
@imjoshv Жыл бұрын
Nice! And thanks
@bensantos42442 жыл бұрын
Hey Josh, a great series of videos on spot free finish. You have shown some that work and others that are ok. As always very informative and a good teaching aid for the novice and experienced. Great job 👏
@David-Godin2 жыл бұрын
Well said
@g.fortin32282 жыл бұрын
Such a great job ! i wont do it as it rains often in the northeast and then its messed up with dirt from the roads. but I'll do 1/2 as good and good enough. Thanks for the detail on how to do it right though and nice to know these tips from a pro ! I need one of those big towels that will make a big difference.
@bobwadsworth47992 жыл бұрын
Good video. I will give that a try. HOWEVER, I live in Phoenix AZ and when it is extremely low humidity and 100+ degrees IN THE SHADE in the evening during the late spring, summer and early fall, it will definitely present a huge challenge for spots!
@pooneyheat2 жыл бұрын
Dude you got a fire wash/wipe technique! You wash with finesse!
@germando81s2 жыл бұрын
Great video Josh! I’ve used your foam cannon twice since I purchased it from you a few weeks ago. Works as advertised! Thank you!
@David-Godin2 жыл бұрын
I think you may have found another way to rate soaps. If they can be used in direct sunlight without damaging the paint. I also think there might be a geographic climate component. Keep up the great work. Your videos keep improving!
@AlexIlin8527 ай бұрын
It makes me soo upset when my car had water spots😢
@alezxiccamposstp5789 күн бұрын
X2
@FTsingos2 жыл бұрын
I'm kind of lucky I have an RODI system that I use for my fish tank. I use that water to rinse my car off at the end. I still dry it off just in case I didn't rinse off all the tap water, but it's so nice knowing that if I don't dry it off in time, no big deal.
@corinnelaking569 Жыл бұрын
Nice video, some helpful tips, thanks, Josh. Side note I have the identical Toro blower. Seems to work well.
@DjNikGnashers2 жыл бұрын
As an ex-valeter, I have to say this is great advice.
@xHustleHaRdx2 жыл бұрын
What A Awesome Video 👏 Congrats May Success Come Your Way. Thanks For Teaching Us Detailers We Definitely Appreciate You 🙏🏼
@vvalasek2 жыл бұрын
Great holistic video - spot on or off as the case may be
@floydavila84062 жыл бұрын
Great Video Josh TY. My question is do you wash your microfiber towels afterwards or just rinse and hang dry? TY
@bertm64002 жыл бұрын
I was wondering the exact same thing
@ComplexWork2 жыл бұрын
Depends how dirty they are.
@deshavetalkwithkit893511 ай бұрын
I hear ya but Superior Products Fomula 4 is the best water bead spay wax I have ever used and it really does make a difference ... Just my two cents.
@lindsaystafford1904 Жыл бұрын
Hey Josh … you and your site are awesome…thx for the info
@abrahan.espinosa2 жыл бұрын
I follow your channel, thank you very much for all the valuable information you give us. You could talk about high pressure hose reels. I bought one on amazon and it didn't work.
@jyoon3112 жыл бұрын
Any tips for using this method when you have a full size roof rack like a prinsu? Water gets in all the crevices and channels and always drip water. Awesome content as well bro
@ddautodetailing2 жыл бұрын
Thanks for sharing 👍! We're always fighting that sun out here.
@imjoshv2 жыл бұрын
👍👍
@BashOnHobbies2 жыл бұрын
I’d like to take a second and ask some questions. You mentioned forensic detail and the 5 min soak and how you can’t do that because of sun. He had sun in the blue GTI video and still let it soak? Is it because he uses no PH Neutral soaps? Built Hamber that he uses has a rating of 13-14 and melts the dirt off. What is the balance in your soaps? Things to consider I guess! I watch tons of your videos, his vids, detail geeks, and chem-x and everyone’s got different ideas based on the soaps they use or offer.
@BashOnHobbies2 жыл бұрын
Also built hamber recommends the 5 min soak to let the soap do its job and remove the heavy abrasives.
@joshuakidd61802 жыл бұрын
Well said!thanks for your great knowledge on this style of detailing!
@golfboy83 Жыл бұрын
Curious why it seems like the detailing community doesn't show any love to the absorber, or similar synthetic chamois? I keep one in each of my vehicles and always use it to dry my cars off. It's also great to have in the car incase of any kind of spill in the car.
@robadams60272 жыл бұрын
What’s the reason you start with drying cloth and finish with blower rather than the reverse? Thanks!
@Frank-hz1cw2 жыл бұрын
Can you use air from a compressor to dry the car? Or is that not a good idea.
@MikesAutoDetailing2 жыл бұрын
Great video
@michiganborn83032 жыл бұрын
Good video for me to save for future reference. Our water up her in the Sacramento is like liquid rock It's so hard and trying to stay ahead of the water drying in direct sunlight is a real challenge in the summer because it gets so freaking hot 🔥 up here.. Think I'm going to pull the trigger today and get my first power washer and thanks to all your reviews I think I'm going to settle on Greenworks from Costco because of the value AND because it comes with a 25' Uberflex hose that you recommend. Like to get accessories like the 1.1mm nozzle jet and a good foam cannon.
@Prometheus0825 Жыл бұрын
Amazing like always 😊 Thanks for the great info
@MrPawle1 Жыл бұрын
Hey Josh, great detail , good info
@MRADHD-ul8qk2 жыл бұрын
Love the videos. On the Dewalt you said you was going to upload a video of a cheaper but stronger one did you ever put that video up?
@jathawk1012 жыл бұрын
The sun can be an issue if you when you wash your vehicle outside while the sun’s heat is at its maximum but it can also be the calcium content of the water you use and it depends on the city’s water treatment.
@ramirotorresjr75182 жыл бұрын
Good advice Josh thank you!
@jayvierra6272Ай бұрын
What are you using for the wheels and tires to get all the iron and dirt off and not even have to scrub? I am a DYI guy and I am brushing my wheels and tires. And I am never able to get the red off the tires... Be nice if I didn't have to mess with the tires... And will using a product like this mess with the pro ceramic coating I have on the rims?
@rdeh1678 Жыл бұрын
A simple trick I use is I have bottle water fountain size aka costco bottle of deionized water and use the Ryobi battery power 600 psi unit to rinse it off
@Arandazzoandsons2 жыл бұрын
What dilution rate do you use for the drying aid? Thanks!
@michaelsiska81792 жыл бұрын
Hey Josh, I am fairly new to your channel and really like it. I noticed in this video and some others that you start the contact wash with the foam on the vehicle. I thought the foam had to be washed off to remove the encapsulated dirt then go to the contact wash. Can you go tell me how that process works for you? If you have a video on it I am happy to check it out.
@kathy12562 жыл бұрын
Very informative video!! Nice job👍
@kgamaseg2 жыл бұрын
Awesome explanation!
@dtna2 жыл бұрын
Can you do a video on good and bad experiences that you had in the past and how you would avoid future bad experiences? I am a DIYer, but I'm just curious.
@964Luftballoon2 жыл бұрын
What about using a leaf blower when drying to push a majority of the water off the car? Then come back with the drying towel instead of at the end
@frankcastaldi25312 жыл бұрын
Thanks for another informative video!
@kashi2843 Жыл бұрын
good video, only one question at 8:07 , you are going vertical from top to down using same mf towel and then bringing it back top, would it not have been better to use another mf towel for the lower section of the car? if you drag same towel up n down... that might just push the residual dirt to top and induce scratches.
@MoiFidodido19662 жыл бұрын
Hi. Great informative video I must say. Just curious to know.....what is your wheel and tire cleaner product?
@waynsmith9538 Жыл бұрын
I just use Griots rinsesless wash. It prevents waterspots 100% without having to hurry at all.
@eddie1v2 жыл бұрын
What kind of soap do you use to wash all your towels.
@jedijakobi89782 жыл бұрын
I have a foam cannon i use only with onr and distilled water on final rinse to help prevent water spotting
@LarryRichelli2 жыл бұрын
Do you buy gallons of distilled water to do this or where do you get your distilled water. Thanks
@jedijakobi89782 жыл бұрын
@@LarryRichelliany grocery store or pharmacy
@Coodeville11 ай бұрын
Formula. 4 Spray Wax works great
@michaelm17392 жыл бұрын
Josh informative video, what dedicated wheel cleaner do you use? When using Technician Choice do you use the product as it was delivered or do you dilute this product? How about when you use this product when doing interiors? Lastly what do you use for tire dressing? Thnkx
@nathanield.45272 жыл бұрын
Any chance you can do a video on washing techniques for mini vans?
@user-xy6uy9je2v Жыл бұрын
is hydrophobic are part of lgbtqtrys++y ??
@007lutherking2 жыл бұрын
I like your process and the camo hat as I literally wear 100% snow camo outfit for my details.. hat, shirt, pants and shoes lol My process is different compared to yours and it works great for me especially in the sun. I do wheels first Door jambs Dead bugs removal if applicable Then pre rinse the whole car.. contact wash with mf noodle mitt 2 buckets. Rinse car all over repeatedly while rinsing off soap Do front bonnet whole area first, rinse off, then front windshield, roof and back windshield, rinse off, driver side door panels and windows, rinse off, rear side, back bumper etc, rinse off, passenger side door panels and windows.. rinse off whole car.. Then I spray si02 based sealant(autosmart Aquaseal pro) using foam cannon and rinse off the whole car, then I detach my hose from pressure washer (I have manual water flow stoppers at the end of my hose with quick disconnect) I plug in a quick connect adapter to induce laminar flow and turn water back on.. dry the now hydrophobic car with laminar flow water and get the bulk of the water off (starting from the roof, this process also keeps the surface cool while drying) then I quickly dry all windows using twisted loop mf drying towel(trc double twistress), use cordless leaf blower to blow out water from the grills and back bumper area.. proceed to scoop up the tiny bit of water left after laminar flow drying with mf towel first the sun facing side and the rest and then use leaf blower to blow out the rims.. if the rims are in direct sunlight, I blow them out first after drying paint on the sun facing side.. But I don't work in sun anymore.. I only do 2 cars.. early morning and late afternoon..save the wash for when the sun isn't shining.. hope this helps.. car detailing is a hard gig lol
@007lutherking2 жыл бұрын
I don't foam the car.. its just a waste of time imo
@thetinker39242 жыл бұрын
I use the stuff for glasses and dishes to keep the spots off the car
@jonathan60092 жыл бұрын
How about using koch FSE for drying aid? Fse is qdd and contains lime removal too
@gregglozanoff8299 Жыл бұрын
Do you prefer to detail with technicians choice after you dry or to wash, soap, rinse, detail spray, rinse, dry, quick final wipe with detail spray? I feel like doing it at the end would do help save the product and apply heavier
@gregglozanoff8299 Жыл бұрын
One video you would apply and rinse. Which one do you prefer for better results on a truck. Should I just detail at end ?
@Luis-jd5ds2 жыл бұрын
Great videos! A new subscribers here! What nozzle do you use for the pre-rinse and rinse steps?
@securetech19663 ай бұрын
What’s a good wheel / tire cleaner ??
@phelps1485 Жыл бұрын
Great video, how much time should this take on average?
@neil58192 жыл бұрын
Is there a reason why you don’t use the electric leaf blower first to dry the car? Why use the microfiber towel to dry first, and then use the leaf blower?
@LarryRichelli2 жыл бұрын
I just bought the most powerful Ego blower and right after my last rinse I just blow the car off instead of using a drying towel.
@LanceThompson-ds4fr3 ай бұрын
Man, I cant find your foam canon. All I can find is the name brand
@brandonnguyen9421 Жыл бұрын
That dry towel vs a leaf blower?
@kennethflnes9472 жыл бұрын
Great video. Kenneth, Norway🇳🇴
@davidbaca78532 жыл бұрын
Do home water softener system help? Or at least make water spots easier to clean off ?
@imjoshv2 жыл бұрын
Hey David I just did a video about DI water and spoke about soft water systems. They might reduce some of the TDS in the water, but will still have them and you can still get water spots. However, I would think that a soft water system will make it easier to not get water spots using this process!
@senraq6332 Жыл бұрын
Can you use a leaf blower first and then towel?
@JP-ro2yi2 жыл бұрын
Both adams car shampoo and duragloss 901 are supposed to help with water spots. Maybe test them out?
@bossquang Жыл бұрын
Hi Josh! I just bought a TDS Meter to test my water and it averages around 700ppm which is terrible. In a case like mine, a DI system would not be very economical since I would have to change resin very frequently. Do you have any alternate solutions for someone like myself with super high PPM? I know I could do rinseless, but I enjoy using the pressure washer and stuff. Thanks!
@andrewgavi3 ай бұрын
Hey Josh! What pressure washer were you using?
@gaberichh2 жыл бұрын
are you able to answer a question i have about the paint on my 4runner. a few small marks