How We Remove Heavy Overspray From Paint

📗 The Ultimate Guide To Start Your Detailing Business: bit.ly/3ax3Dtb
📘 The 8-services You Can Offer in Your Detailing Business: bit.ly/3mDy4Aj
🎙 The Detailing Business Class Podcast: bit.ly/3JHzKEk
🔌 Where I get most my tools and products: bit.ly/30iyTH4
🚀 Join the Detail Groove Training Facebook Group: bit.ly/3bjzX2w
⚡️ Try Jobber with a free 14-day trial and 20% off for 6 months: getjobber.com/...
Stuff I use:
👉🏽 Exterior Tools and Products
Karcher 1700 pressure washer: amzn.to/31peFbz
Bigboi Blower PRO: amzn.to/3EzD4Q1
iK 1.5 pump sprayer: amzn.to/2EtZAgH
iK Foam Pro 12 Sprayer: amzn.to/3vo7inH
“Little” EZ Detail Brush: bit.ly/3o3RjUU
“Big” EZ Detail Brush: bit.ly/2V9xizJ
Sidewall Tire/Carpet Brush: bit.ly/3dIY9KM
👉🏽 Interior Tools and Products
Aqua Pro Vac 22ft hose: shrsl.com/2v049
Aqua Pro Steamer: shrsl.com/2tn00
Vortex II Cleaning Gun: amzn.to/3t0eP8s
Tornador Blow Out Gun: bit.ly/3vGxrea
DeWalt Cordless Drill: amzn.to/2Xl56sS
Neiko Work Light: amzn.to/2RaJHEI
Autofiber Ninja Sponge: bit.ly/3kakxR4
Autofiber Ninja Mitt: bit.ly/3pCtMe0
Flex Powder with Citrus Solv Prespray: amzn.to/3h59pCR
Flex Ice Powdered Neutralizing Extraction Rinse: amzn.to/2FudfaB
DISCLOSURE: Some of the links are affiliate links. The prices never change for you, I just get a small commission if you make a purchase.

[@CapELarry]

My neighbor left his wife’s truck in the driveway when they got a new silicone roof coating on a windy day. My birthday present to her was removing what felt like a 300 grit sandpaper overspray finish on her F-150. Took two days but it came out perfectly. Sooo many clay bars used.

[@jairmartinez2246]

Goof off is what I used last time to remove overspray. It did magic, and did not damage the clearcoat at all. Maybe you've given that a shot, if not do so. Saved me a lot of time and money.

[@DetailGroove]

Yep, that also works too. Goof Off, Citrol, and Rapid Remover are all great options based on the severity of the overspray

[@Gnetbird]

Yes, I try to use a chemical to weaken the baked on overspray, then I use clay bar. I like to use 3D one finish the paint.

[@mysterywrecked]

I was introduced to a product called Motsenbockers Lift Off and it has been a miracle product for us. Had heavy spray from graffiti on the train during new vehicle transport, and it did the job easier than anything else. It says latex paint remover, but I've used it for all sorts of bonded contaminants, even tree sap and iron contamination. Basically whenever I've got something tough on the paint, I try this first. It is water based and can be used with clay as well for more effectiveness. As a solvent, my go-to is Stoner Tarminator, does much more than tar and sap as well.

[@britishrocklovingyank3491]

I tried Ivan LaCroix's razor blade method and it worked crazy good. I do it all the time now.

[@flipper2473]

Hello, what would you advise to use for 2 k spray can over spray that I am surely going to have because I am loosely masking a small area over wheel on truck and not clearing the whole panel. Thanks

[@Calendyr]

I hate overspray, I just refuse to book customers for that service. That is the one thing in detailing I don't have the patience to do.

[@emjayy9527]

Any ideas for the glass? Clear coat over spray

[@justfasthd24]

Awesome video!

[@jeremyremington8897]

Any chance you guys got a method to clean off overspray that is throughout my interior being dash n plastic trim . I live in ca.. as ive heard a orange product out there that i cant get.. tried goo gone. N other products with no luck

[@Invesibledetailer]

Thank u for the video, quick question.. what clay brand are you using?

[@verduzcoautodetailing3183]

How did you remove the over spray from the plastics on the door??

[@beyondthedetails]

Bro, I am looking for my shop since moving to Houston. Do you have any recommendations?

[@taylormobiledetail]

Why wouldn’t u use the nano skin 6 inch buffing pad?

[@DetailGroove]

The heavy grade clay bar has a tougher "bite" than a clay mitt. This is the few times where we go back to the clay bar

[@taylormobiledetail]

@@DetailGroove the nano skin isn’t a clay mit also has more power on a dual action buffer and is a lot faster.

[@DetailGroove]

@@taylormobiledetail oh my bad- just not a fan of those tbh but that's also a valid method

[@stefan-stocksmadesimple5241]

3:00 start

[@inoagaiwhodetails]

Metal razor with handle for the glass and orange plastic razor for the paint. With some kind of lube.

[@emjayy9527]

The razor doesn’t scratch the glass? I’m a little afraid to do that . Also it’s clear coat overspray. It’s been a struggle 😅

[@inoagaiwhodetails]

@@emjayy9527 NO THE RAZOR DOESN'T SCRATCH THE GLASS. IT HELPS TO USE A WINDOW CLEANER FOR LUBRICATION AND ANGLE THE RAZOR. AND USE THE ORANGE RAZOR FOR THE PAINT IF YOU HAVE SOMETHING THAT REQUIRES IT. IF YOUR AFRAID TO TRY IT. GO TO YOUR LOCAL JUNK YARD AND PRACTICE THERE. NO ONE WILL CARE. JUST PRACTICE ON A MESSED UP PANEL AT THE JUNKYARD UNTIL YOU FEEL COMFORTABLE.

[@indyguy5570]

@@emjayy9527 No it does not scratch your glass, just hold it at a slight angle and use some water or lube and gently scrape the glass and you will be fine. You can do it dry but I prefer some type of wetting fluid to help.

[@ToddTinley]

Do a video removing polyurethane overspray from a vehicle.

[@raymaroney2106]

lacquer thinner and a white cotton t-shirt and this would have came right off. You would have been done in 30 minutes.