Asalam o alikum sir how can we reduce the noise so that signal can be increased?
@zerocramchemistry16103 жыл бұрын
By using better conditions of working environment such as temperature, voltage, current, controlling electrical fluctuations, by using better instrument both interms of software and hardware.
@zainabsharif28863 жыл бұрын
Sir forward baised Pn junction can be used in detectors? And sir in n_type and p_type semiconductors we can use any other elements instead of boron and phosphorus for doping
@zerocramchemistry16103 жыл бұрын
Not, we need current only when only light from source fall on it, so it is possible only in reverse biased form. Yes, we can use other elements in doping only if they too provide holes and extra electrons.
@raotoqeermurtaza1733 жыл бұрын
Sir what is the function of cathode in PMT
@zerocramchemistry16103 жыл бұрын
Cathode is negatively charged electrode and on its surface coating of phtoemissive material is carried out so that it emit electrons when photons coming from light source or emitted by analyte strike its surface.
@noob_10pubg113 жыл бұрын
Very Helpful Sir ❤️ Masha Allah
@tayybarazaq50793 жыл бұрын
Sir in video you have said that if signal to noise ratio is low then response of detector will be better but in below graph as the signal to noise ratio is increasing dowmward but signal become more prominent
@zerocramchemistry16103 жыл бұрын
Signal to noise ratio should be high. This ratio will increase when value of signal increases and value of noise decreases, so we will get more prominent signal of analyte in this way.
@raofaisalattique62613 жыл бұрын
Informative lecture 👌🏻
@hasnainali70472 жыл бұрын
Such a fruitful lecture sir❤
@alialyas7403 жыл бұрын
Depletion region increase krny sy Current decrease kaisy ho skta??
@zerocramchemistry16103 жыл бұрын
Depletion region is actually the barrier. If you see in picture, at the joining boundary P side contain electrons and N side contain holes. Both are stuck together like cement, not allowing flow of charges. However if this barrier is thin, it can't hold the charges, charges will flow, and flow of charges produce current.