The giveaway has ended! Congratulations to the winners R600 Secondary Air filter Adapter! www.shopdap.com/vwr12g7r600spaf-vwr.html VWR Intake System - MQB R600 Enclosed Airbox intake System USA - Cotton Filter www.shopdap.com/racingline-vwr1200r601eusa.html VWR Intake System - MQB R600 Enclosed Airbox intake System USA - Foam Filter www.shopdap.com/racingline-vwr-intake-system-r600-trifoam-filter-mqb-evo-mk8.html Racingline (VWR) Intake System / R600 / COTTON FILTER/ MQB EVO MK8 www.shopdap.com/racingline-vwr-intake-system-r600-trifoam-filter-mqb-evo-mk8.html Racingline Coolant Under Hose For EA888.4 2.0TSI MQB EVO R600 www.shopdap.com/racingline-coolant-under-hose-for-mqb-evo-2-0tsi-ea888-4-r600-not-for-high-output-continental-turbo-r-s3-vwr17g8r600-racingline.html If you would like a Racingline Intake or any other VW/Audi Products, Check out our site! - www.shopdap.com/ - Intakes Linked below!
@lostpencils16 күн бұрын
how often does the air filter needs to replace than vw original ?
@Willhfxep Жыл бұрын
Only Paul would make an air intake install entertaining to watch.
@3vil8unny Жыл бұрын
So dirty😂😂😂 great vid
@smeagle3295 Жыл бұрын
IKR. It’s like Doug demuro meets the avgn in mechanic form. I am impressed.
@kristoffer30004 ай бұрын
@@smeagle3295 What a horrible thing to say, Doug ain't even close to this entertaining. And Paul actually knows shit about cars.
@joes.7536 Жыл бұрын
When you find a guy on KZbin that nerds out as much as you. You watch him. 👍🏼
@ethanjankowski7069 Жыл бұрын
just picked up a mk8 gti about 3 weeks ago and your guys channel has been helping so much with everything mk8 !!! thank you guys seriously, makes my life soooo much easier
@mightycarmods Жыл бұрын
Car goes pshhh pshhh 👍
@coldhardrock Жыл бұрын
The OEM+ look if these intakes is great, almost looks like a factory option. Also gotta say thanks to Mk7 Jeff for making all that testing available for free as I've really enjoyed reading through it all and thinking about what I want to do with my Alltrack.
@davekal Жыл бұрын
OEM+ aka lots of plastic. =d
@borderwave2 Жыл бұрын
No data on whether the filter media works as well as the OEM filter however.
@coldhardrock Жыл бұрын
@@borderwave2 good point. That would be an interesting comparison.
@fstcvc Жыл бұрын
Nothing better than an install video with Paul! As always you made it more entertaining and even show the struggles that we all run into when doing our own projects.
@heroofharo3 күн бұрын
As a guy who doesn't and will not own that car, but does plan to do an intake, thanks for putting the important part up front.
@patrickfinucan2201 Жыл бұрын
Oh Paul...even the most simplest install you still manage to suffer and struggle... Even with opening a simple plastic packing from HD. Glorious to watch!! Laughed all morning. Thank you for this!!
@slowboat76473 ай бұрын
😅😊😊😊😊😊 WZq q
@miketeeveedub5779 Жыл бұрын
Love the intake sound - much better than vanilla stock with the Soundaktor! Increased Hp and Torque nothing to sneer at either! Now do a soft tune comparison with the stock and aftermarket intake. That would be an interesting comparison as well. Cheers!
@toddhunt2087 Жыл бұрын
Cant say enough Paul, your videos are fun to watch and informative. You make it all look easy! Keep them coming!
@flyingbear_fpv9291 Жыл бұрын
Installed mine yesterday on 2023 S3 8Y Noticable difference in turbo spool and throttle response. Sound also way nicer and throatier. Thanks for the vid. I am happy I came along this! Great work!
@ismaild1982 Жыл бұрын
Incredible OEM+ products that just work, with ease of installation and simplicity.
@xenemyx Жыл бұрын
After having my mk7 performance for a year in stock form, I’m ready to get a little extra out of it. I’m happy an intake gets you more than just better noises. 💪
@clipsncasts1 Жыл бұрын
A little extra? You can get alot more like +80hp over stock. Tune and downpipe is most of that
@questorthews Жыл бұрын
Whenever I see a DAP video I immediately like! Thanks for putting these very informative videos together for us Paul! Really helps me work my mod decisions for my MK8.
@shanea9613 Жыл бұрын
I am from Australia. I used to have a golf... Now I have a 2007 bf mkii Falcon XR6 ute. It has a straight 6 cylinder 4.0 litre turbo charged engine. Installed an intake and could feel the difference with it. Had it dyno tuned and went from 202kw at the wheels to 208kw at the wheels just with the intake. The actual dyno tune is now 306 kw at the wheels 870nm of torque. Only mods are the intake and a cat back 3 inch exhaust. My favourite thing about it is the induction noise from the intake.
@paulsimpson899010 күн бұрын
Love the Barra!! I had two fg xr6ts myself. I eventually got sick of noisy diffs etc so I went down the second had bmw route instead. Stock drivelines can handle 800hp and engines can make 650 on stock internals. All the tuning can be done using your smartphone. If you ever get rid of the barra give one a go 👍
@lucbegin7334 Жыл бұрын
I've told myself that I won't modify my S3...but these vids always get me to re-think my decisions lol. Keep it up!
@ViktorPlays321 Жыл бұрын
Love the intake mods, especially with dyno proof!
@BobaAddict Жыл бұрын
Wow, I was not expecting such a big boost from just an intake. This looks like a great mod in terms of aesthetics, sound, and performance! Hope I can win one 😁
@alexelstun3630 Жыл бұрын
Just picked up a Mk8 GTI and you guys have done the most by far covering modification of these cars! Keep up the good work!
@pedroleon5280 Жыл бұрын
The only thing better to watch than install videos are "Paul and his cameraman" install videos. Funny and weird sense of humor. Great stuff!
@christophermaldonadopr Жыл бұрын
Hey guys, I might have missed some content in this gti, but how is making 291 hp and 342 torque? With just the inlet turbo racingline?
@fazlee712Ай бұрын
that's about what my GLI does with just a stage 1 ECU tune and everything else stock so I'd guess it's just that
@harrisontrumbour4978 Жыл бұрын
Always thought performance from intakes was negligible, glad to know there are some gains!
@MrTheHillfolk Жыл бұрын
Just like an exhaust,it depends on how restrictive it is to begin with.
@elesjuan Жыл бұрын
@@MrTheHillfolk also depends highly on the design of the aftermarket intake. If it literally replaces your airbox with a cone filter under the hood sucking hot air, you're more likely to LOSE power.
@MrTheHillfolk Жыл бұрын
@@elesjuan that's why you don't do that.
@DairyKing404 Жыл бұрын
I found this to be true for naturally aspirated engines, but with turbo power, intake is definitely worth it!
@harrisontrumbour4978 Жыл бұрын
@@DairyKing404 definitely, been thinking about getting one for my Audi A3. Eventually wanting to go stage 1
@bakamotorworks505 Жыл бұрын
Finally got a new to me mk7.5 yesterday after lurking and watching your videos for the last couple of years! Paul you ought to get a commission for how many enthusiasts you’ve brought to the VAG community!
@lmfarris2284 Жыл бұрын
it is amazing how much of a difference that part made. especially in the sound.
@junobd Жыл бұрын
Thanks Paul, looks like the R600 is a pretty nice air box, glad I decided to go with it+turbo inlet
@MB-sh7qx8 ай бұрын
Racing line is second to none. They make the best parts for our platform. Also, I very much appreciate all of the videos. They are incredibly helpful. Thank you
@ndyke020475 Жыл бұрын
Fair enough this man is best of showing and explain how to remove and fit new with every detail
@jacobmiller5180 Жыл бұрын
I've been following every video Paul has made since he got his mk8. You inspired me to get my NA Mk8! Thanks Paul!
@backnunAndy Жыл бұрын
For older car, it works pretty well. However, current new models have various sensor to control engine power with so many variables sent by million sensors. I believe without mapping the ecu, ecu always want to compensate extra input and try to keep power figure within its ideal parameters
@malcolmn.5222 Жыл бұрын
Is this speculation and conjecture or facts?
@backnunAndy Жыл бұрын
@@malcolmn.5222 facts! not like 90's car! whatever you put in, you need to remap for changes
@ozwogman Жыл бұрын
Really need one of these on my arteon.
@MikeEH3 Жыл бұрын
I just used one of your videos to replace my water pump. It was a lot easier than I thought. Thanks for the help!
@jkonzy Жыл бұрын
I love how these look oem+ and have the performance. And now because of this video, 100% the choice im getting for my mk8
@KutWrite Жыл бұрын
I appreciate that you put the results first, then the installation. Did you disconnect the speaker that supplies the fake noise?
@eppyz Жыл бұрын
Is this 8 running any type of piggyback tune? Most gains on an Intake and or exhaust are made with a tune. On a completely stock car? I doubt there would be much gain at all. I personally do not like the noises. I mean I did when I was 20 but not when I am 50. haha.
@kegfreak3728 Жыл бұрын
I already have an intake, but I love the noise. The turbo exhaust delete really makes the "shhhhh" even better.
@djaric Жыл бұрын
It's fun seeing someone actually struggle like a normal person would who hasn't done this before on an install, instead of having everything perfect and acting like they know it all. 🙂 Making me want get an intake for my Civic Si.
@runx Жыл бұрын
As a new golf GTI owner - this channel is pure gold!
@japcarlucky Жыл бұрын
Glad they offer the cotton alternitive , i have seen a lot of damaged foam filters and I was always afraid of downtime to replace one , Sick system !!
@mrwhale810 Жыл бұрын
The look of the racing lines are absolutely incredible! Could definitely use one of those.
@burb17 Жыл бұрын
Between the hip hop references and the sucky sucky I was dying 😂😂😂. Only thing better than these videos is when Paul and Charles collaborate
@keenan537817 Жыл бұрын
Its great that you guys included a dyno session for this product install vid!
@doczilla1023 Жыл бұрын
17 minutes of quality content but I'm here for Paul's BOV sounds.
@_DaRobot Жыл бұрын
I am running a DIY intake my mk6 2.5, not sure about power but sounds good🤷♀
@KarelBeelaertsvanBlokland10 күн бұрын
A cold air intake in general will add some Horses when the opening is mounted low at the front grill. But most cheap intake filters mounted high on the engine will only suck in more hot air from the engine not adding any horses!
@darylmorse Жыл бұрын
They should offer a version with the secondary air inlet hole already drilled.
@krazyowl2 Жыл бұрын
Great video, been looking at adding an intake for a while now! Love the before and after comparisons along with the dyno results.
@bryanb661 Жыл бұрын
I love your channel, I came across a few months ago, Kinda living my youth thru my son, Had a MK6 SE 2.5 Manual jetta,Billstein Lowered, Catback exhaust, LED Lights etc, at the Beach and a BMW did a donut and smashed the front, Totaled, Just got a MK7 GTI, Frigging Love it, He does too, I had a Golf GTI in the early 90s..after my 68 Ghia, Loved that car. Keep up the Great videos, Thank you
@DD-ih4cjАй бұрын
The biggest change is, that the r600 has two ways for air. The stock one way for air. So Open the stock way and you gain close some power. Only Sound you get with r600
@jonkaita2225 Жыл бұрын
Thanks for always making installs easy to follow for non-mechanics, like me. I have purchased many of your products based on your install videos and followed them with perfect results. Aloha!
@Deutscheautoparts Жыл бұрын
Thank you so much for the kind words and support. We appreciate it very much.
@ethanndichu1280 Жыл бұрын
The filter is so huge. Love how it looks as well as how functional it is.
@eskaterboi Жыл бұрын
"Never go in dry!!!" This is a mod that I would definitely love to add to my GTI!!
@scottmckinley752 Жыл бұрын
I really lean toward a closed box intake over the open filter. Nice to see that one of the intakes that has caught my attention has at least a little benefit.
@jonytube Жыл бұрын
Same. I can't shake it off that open filters are just sucking in hot air
@pazupazu2781 Жыл бұрын
@@jonytube Closed air box plastic parts acumulate heat as well so you will be warming that air no matter what. Also it depends on your hood design oem with no air vents is not so good at gettin hot air outside with proper air flow...
@alpacalord381 Жыл бұрын
Sick video definitely going to look into getting one for my mk8
@SethBlasco Жыл бұрын
Good to have all the info on this! Looking forward to pulling the trigger on some more parts for my 22gti
@SlipperyPapi Жыл бұрын
Great video, good to see some solid gains with just an intake. And love it when a video has everything in one place and not 743 parts to it.
@johnryall81520 күн бұрын
“Going in dry” “Shocker that it’s not going in” I’m fucking dying.
@smokeykillerk Жыл бұрын
Absolutely love the sound that it makes. Quality content
@asch8056 Жыл бұрын
Watching from the netherlands and enjoying the vids with paul. Like the way he jokes around the video. Never gets old🙂
@agibsonian Жыл бұрын
Great vid as always, love that you guys keep the parts in that you could have easily edited out. You say where you messed up and how you corrected it, great stuff.
@flybigz Жыл бұрын
I love these kind of tests which shows the actual improvement! Keep up the good work :)
@KS-ro6in Жыл бұрын
I owned a 1980 Scirocco , a 2006 Mk V GTI and a 2015 Mk VII GTI and just bought my 2023 Mk VIII GTI 40th Anniversary. I would love the free intake.
@juyager21 Жыл бұрын
Really love the look of this intake and the sound improvement.
@ranceriley566 Жыл бұрын
Things I learned from Paul from an intake install…rub things together for lube and don’t go in dry😂 Awesome video!!
@nl33izzettin26 Жыл бұрын
Normally I do not like, or feel the need for, performance tuning, but this is one i actually consider just for the sound. Now to save enough to buy one for my 7R..
@nelsonsantana6778 Жыл бұрын
awesome video guys, the mk8 is really growing on me now thats ive been seeing them out more and more.
@rthompson938 Жыл бұрын
If positioned correctly so it doesn't suck in warm air from the engine and you usually need a remap to make the best gains.
@silva27 Жыл бұрын
Intake is my next upgrade to my car. Thanks for giving insight on R600 intake, I might consider this 🤔👍🏼
@adamibrahim9488 Жыл бұрын
Always a pleasure watching Paul and the crew mess with cars, never gets old 😂
@jonatj38 Жыл бұрын
Never go in dry! Good reminder.
@turdzilla1675 Жыл бұрын
Didn't expect to see any gains, pleasantly surprised. Racingline makes quality stuff though. I've been running their cup kit on my 2 door MK7 for about a year now and it's been perfect.
@CrazyCracker702 Жыл бұрын
Was surprised on the results, better than I expected and looks great.
@hectoryanes2891 Жыл бұрын
I love the OEM look of the closed intakes
@knndyskful Жыл бұрын
I bought one of these, got the whole intake from the turbo muffler all the way to the filter Lol this was a very funny episode, thanks 🤙
@jaredkelly925 Жыл бұрын
Always wanted to see some dyno numbers for this! Thanks guys!
@rubenmorfin3303 Жыл бұрын
Love your content!!! Thinking of getting the R600 intake for my mk7 gti, love how this intake sounds and the OEM look is a plus for me
@swype.media-9309 Жыл бұрын
The saw to cut open the package actually had me laughing out load
@ogfromutube9649 Жыл бұрын
I have a 98 inline 5 turbo Volvo.. snabb makes a turbo inlet but there are no decent intakes. I bought some 3" spectre tubing. As I have a 3.25" maf for my larger turbo I needed a 3.25 to 3" coupler. My inlet as well being 3" required a coupler in 90°. So anyway I used a 3" straight section and mounted my 3" inlet spectre filter directly behind where the stock airbox attached to the air dam in the grill. Used a 3" accordion style duct work and ran it through the grill. I have no shield and the filter is still getting some inside under the hood air I'm sure. But since I have water methanol injection pre throttle body. That air might be warm feeding into the turbo, it's below ambient going into the engine. Even with a stock intercooler my iat combined with 93 octane + vp racing octanium achieved maximum brake torque which usually requires e85. Have a dw fuel pump and 80lbs dw injectors. A billet hybrid turbo. And made 350whp and 415ft lbs of torque on an almost 30 year old stock internals engine. And modified stock ECU with internal 3 bar map sensor, and repurposed rear O2 preheater wires powering my vvt cam solenoid. Also running full lambda control eliminating the stock narrowband O2 wiring the aem x series analog into my stock harness. Pretty amazing stuff from my tuner. He modifies the ECU himself adding a voltage step up to enter flash mode, and created an xdf parameter file to work in tunerpro. Even 2 step launch control, and flat foot shifting with an added clutch switch, as well as dual maps I can switch on the fly by pressing the gas pedal on key on no start. One map for 93 and one for the 93 + vp. Also set a flashing engine light if the knock sensor detects more then 2 knocks in a 1 second period. It can read up to 46 parameters at 25 samples per second.
@marctheda Жыл бұрын
I’ve had my eye o this intake since getting the car. Dope to see some before/after numbers!
@hotstreak864 Жыл бұрын
The difference in sound is crazy! Might have to pick one of these up!
@Chris-tx9ou Жыл бұрын
Fantastic review just what i have been looking for - R600 would be my dream intake for that factory look and the sound is just how it should have left the factory. great video well done
@k3ntris Жыл бұрын
The OEM+ look plus the sound is how they should be from factory!
@71KR117 Жыл бұрын
The R600 looks like a good step up over the simple “replace air box with giant cone” cold air intake
@emeelius Жыл бұрын
Fav channel regarding Volkswagen's
@Mambomel Жыл бұрын
I just install a Leyo intake as well on a MK7 1.4TSI with a stage 1 Revo tune and I have to say it does make a slight difference especially on the mid to high range.
@The_Real_DiMaK Жыл бұрын
Racingline is where it's at!
@joepalombi7142 Жыл бұрын
Thanks for answering an ages old question on the benefits of CAIs with some science 👍 I also think this is worth it for the intake sounds alone!
@blacktoothstavros2606 Жыл бұрын
Giving added "foof" is always a good thing.
@user-vk5me3mr7d5 ай бұрын
I like your humor and great VW knowledge.
@monsieurlaverite1412 Жыл бұрын
Had the part installed in my Cupra. In addition to more intake noise, it subjectively brings even less torque in the lower speed range. Since the filter performance is also much worse than the original filter, it was thrown out again.
@brettv5724 Жыл бұрын
Looking forward to ordering the R600 kit for my Golf R, as I desperately need one - thanks for the free flowing information!
@michaelwoods7144 Жыл бұрын
Wow I wasn't expecting it to sound that much different! I need one!
@matthias12345654321 Жыл бұрын
The R600 is the best looking/performing intake for the Golf.
@bosoares Жыл бұрын
I laughed pretty good when I saw the package for the hole saw being opened with an angle grinder :)
@PhilupR Жыл бұрын
The best thing ever for opening those kinds of packages....a simple hand crank can opener. Just run it down the side
@fiji4t20oo Жыл бұрын
the extra turbo noise is the best part imo
@trekwilhelmi2221 Жыл бұрын
Great looking intake, definitely OEM+ rather than Autozone pod mod.
@leonardo9 Жыл бұрын
Why does it sound so beautiful 🥲
@DavidToback Жыл бұрын
My car was the tester for Injen and their intake. It’s a straight aluminum massive pipe but sounds incredible!! They dynoed and saw nice power improvement around the same you. But I like the look of the Racingline
@Captain_Ironblood Жыл бұрын
Man, does it make a difference! Sounds awesome, thanks Paul for the video!