Devilbiss DV1 Clear 1.3

www.motivatedpainters.com
INSTAGRAM: / motivatedpainters
MOTIVATED PAINTERS AS IS WOULDN'T BE POSSIBLE WITHOUT www.buddscollision.com which is where I have worked for a decade now!
KZbin CHANNEL: kzbin.info/door/tiv...
SNAPCHT: gabriel.merino / gabriel.merino
LINKEDIN: / gabriel-merino-70488384
TWITTER: gabrielmerino90?l...

[@TTRVision]

your finish is top quality because your first layer of clear is full wet thus it makes the perfect foundation for the second final one. top job! a real pro!

[@ferenkmendez2083]

Another class for me Gabriel..!! God bless you bro.

[@MOTIVATEDPAINTERS]

Awesome!!!🥰

[@user-un5my5bw4j]

I love the dv1 clear gun so much i sold all my walcoms and got the 3 dv1 guns and a flg primer gun

[@David_Creyke]

I’ve had these base/clear guns for like a month now. I love them. Make life easier. They’re actually a little lighter than a GTI but they are weighted different, they feel great but I’m taller lol.

[@ianholmen888]

I have never seen a paint that looked that good in real life.

[@speedokoterefinishnetwork4937]

Amazing finish

[@moparnut6286]

Between you and the gunman........I really want one of these guns......great video.........thank you

[@bodytm]

Thank you so much.. I wanted that gun wen Devilbiss showed first time, and now after great review from you.. I want it even more 🙈 thank you so much Gabriel!! 🤣😄

[@asicerik]

Looks really nice Gabe!

[@MOTIVATEDPAINTERS]

Thanks !!

[@madisonmarlow8848]

Great demo. It turned out great! You should work with a paint gun company to make lighter guns for short people lol. But the tips for orange peel and the spray pattern were perfect! Keep up the amazing work!

[@MOTIVATEDPAINTERS]

Hahah I have !!!! Motivatedpainters.com ! Walcom !

[@jimmatzke4974]

Hi Gabe. Good video as always. What percent are you over reducing the 530? No dieback or pop with added solvent? Are you doing the same with 520 and 550?

[@tvtafga4504]

You are a very teacher of this industry I am from Morocco, following all the videos posted on KZbin

[@MOTIVATEDPAINTERS]

Thank you!!

[@neffmunoz7]

Love your videos bro. Keep it up 👍

[@MOTIVATEDPAINTERS]

Thank you!!

[@chuckstewart8927]

As always....another good video. .....also you do good work.....enjoy

[@matthewturkington6538]

Cool review 👍

[@lloydkratka3733]

Just bought mine, should be here in a few days

[@MrSecyrb13]

Keep an eye out for the recent PPS liners they are standard on one half of the seal and really thin one the other half. It's been causing drips onto the panels

[@HDThoreau_]

Nice job Gabriel. Too many reviewers of this gun give this gun a poor review because they do not understand concept of HVLP and do not set up thier gun properly. The whole idea of HVLP is transfer efficiency. (Less overspray going into the filters) Thats why these guns work best at very low pressures. Higher VOLUME of air with a lower PRESSURE of air. That is....to atomize the paint with MORE air (bigger air chambers) rather than faster, higher pressures of air. Too many do not understand this concept and try to treat or set up their gun like an RP. This is why we use 3/8 high flow air fittings. The best way to use an hvlp is to set to full open and adjust at the wall. The reason for this is when you adjust at the gun is has the same effect as when you put your thumb over the end of a water hose...you increase the velocity and pressure of the water. Remember, you want MORE air not FASTER higher pressure air. People always ask, "What pressure do you set your gun to?" The answer I give is where ever the sweet spot is. It's a range that is entirely dependent of booth conditions, material being sprayed, etc. With this gun I set it anywhere from 16 to 20 psi on the digital guage depending on those factors.

[@richardhowle7844]

😊

[@rodneythomas6517]

Nice job brother!!!

[@MOTIVATEDPAINTERS]

Thank you!!

[@kamildarek3425]

nice nice nice😀 good job Gabe

[@MOTIVATEDPAINTERS]

Nice nice nice thank you!

[@Jaimerga]

Hi Gabriel, first of all, congratulations on such great videos. Question: which gun do you recommend more, the DV1 Clear or SATA 5500 RP for clear. Thanks and regards.

[@MOTIVATEDPAINTERS]

From those 2 I would go with dv1clear 1.3

[@frankiej.5581]

Thank you Gabe for the review I am going to pick between the sagola or the dv1 thanks.......

[@megaman4201]

Which one did you choose?! Looking at the DV1... TC Annapolis MD

[@frankiej.5581]

I chose the sagola with the 1.4 tip the reason being is sagola has a wider fan pattern....

[@trulygifted6301]

The gun is good, color is pretty, but price point makes me just stick with my Sagola 4600 extreme as its lays clear just like a beast. I think the 22 psi is calibrated and different from inlet pressure, but i could be wrong. Glad to see you back Gabe!

[@MOTIVATEDPAINTERS]

Boom! Whatever works for you is the best period!

[@mescalp]

yeah its tempting to go on PMP supplies but how many clear guns do we need.. Sagola 4600 is a beast

[@David_Creyke]

You’re right the digital reads a little lower as it’s meant to read pressure at the tip of the gun. I would try the Sagola but they aren’t very well supported here in America. Prefer to get my guns from our vender they get a better rate than just going on eBay or one of the online sellers.

[@trulygifted6301]

David Creyke Refinishing if you want Sagola, They have support here in US, Len at autobodystore (dot) com. PMP supplies has really good deal on Sagola 4600, use “Sagolasale” as coupon cose

[@josemora3352]

Uste es un pintor chingon Gabriel 👊

[@MOTIVATEDPAINTERS]

Jajajaja gracias !!!😂🥴

[@masbropainting819]

Nice good job my friend.. 🙏🙏💪💪👍👍👍💟💟💟

[@krischarest8469]

Great video!

[@MOTIVATEDPAINTERS]

Thanks !

[@audia4addict950]

Nice job 👍

[@danraul6258]

Hey Gabe, great video like always. I was wondering if there is a big difference between the base and clear version. I have the base one and I really like the way it lays the clear. Thanks and wish you great hollydays with loved ones.

[@MOTIVATEDPAINTERS]

To be honest I'm not to sure I believe the caps are a bit different.

[@jeremyoetken2094]

The clear gun is faster

[@PhillipHall01]

Dan I have heard great things about the base gun used for laying clear. In your opinion, do you think your base DV1 lays clear as nicely as this example of the clear version in this video? Thanks. Phillip Hall

[@beledugjatiBJM]

love your video bro👍👍👍

[@MOTIVATEDPAINTERS]

Thanks !!

[@brandonproctor9028]

Great video brother!! I spray for gerber collision in Detroit Michigan we use the iwata ws400-01 clear guns and iwata base guns as well. I may take a job offer at a local dealer here and I’m considering on buying new clear and base guns, gerber supplies us with the iwata and I love them. But I’m short as well same height so I’m nervous about that! My paint rep is saying this gun is amazing, what’s your favorite clear gun out?! I got abunch of sata 4000s but I want a new set up!

[@MOTIVATEDPAINTERS]

I am bias because I sell them. But but but I sell them because they have been so amazing for me in a production shop! Walcom hte base and clear. 1.3 both on my website thats how much I like them! www.motivatedpainters.com

[@TheXavier1313]

Thats the clear gun that im getting next it looks great

[@lafmon5785]

Gabe I bet you can slick a job out with a harbor freight gun lol, you make the gun look good. It's the operator not the gun with you Consistency is key. Keep up the great work and great vids

[@MOTIVATEDPAINTERS]

Hahaha thanks so so much 🥰🥰

[@yurygerasimov5840]

Harbor freight came out with Sata 5500 clone

[@splash5974]

We dont have Harbour Freights in Canada. But we do have Princess Auto Lol

[@alfaivre2990]

Hey Gabriel, I saw on here you said you weren't really into the basecoat version of the DV1 but during your review of it you said you liked it. I was wondering if you used it more and just found some stuff you didn't like about it with more use or you just like your Iwata more. I'm looking for a new base gun and I don't know if I want to get a DV1 or a ws/ls 400 Iwata. I'm upgrading from a Satajet 4000.

[@MOTIVATEDPAINTERS]

Yeah it was okay for me the cons outweighed the pros. My current favorite gun hands down is the the base Walcom 1.3 which is why I'm proud to sell it and fully stand behind it! I offer money back guarantee because I believe in it so much! Motivatedpainters.com

[@mornejack5799]

Smart bru

[@komoru]

Can you do an updated review on this gun after you've been using it for over a year?

[@chrisyoung5275]

Want one of these real bad!

[@CristianCastro-nx2nu]

Hi, between the Dv1 and the genesi 360 of clear which one do you prefer?

[@B0tinh0]

Now you got me curious... What's the weight difference between the iwata or walcom and the devilbiss? Good job there mate!

[@MOTIVATEDPAINTERS]

I'll post it

[@charlesstevenson1352]

Yo Gabe!!! What’s the best gun to use for painting industrial trucks with single stage. Keep in mind these are not show trucks so they don’t need to be flawless. I’m just looking for something that shoots single stage nice and heavy? Thanks for all your help.

[@MOTIVATEDPAINTERS]

I would get a ws400 80psi at the wall and regulated at the gun 30

[@gtogus712]

What do you think about that blue prolite you have there compared to the DV1? For clear

[@modzillacustoms1559]

Awesome work 👌 how many turns out on fluid did you run

[@MOTIVATEDPAINTERS]

Usually I turn until it hits my finger on the trigger

[@lazz8827]

Just got the dv1 clear gun and was wondering could u spray base coat with this gun?

[@stevemaccumber6698]

I picked up one of these guns last week and I am loving it. I don't mind the extra little bit of weight

[@MOTIVATEDPAINTERS]

Awesome!!

[@fyof5540]

Compared to the GTI PROLITE, is the DV1 clear gun’s fan lager?

[@TheXavier1313]

Yo man can i ask you something what gun do you use for your blender and sealer? thanks alot man this is my 2nd year painting

[@MOTIVATEDPAINTERS]

Blender I use spray can from spray max called 1k blender and sealer I use ws400 1.3

[@splash5974]

Man, that finish layed down beautifully! Whats the actual weight of the gun compared to lets say the Tekna Prolite?

[@MOTIVATEDPAINTERS]

Shoot I don't know! It was a demo

[@splash5974]

Took me 6 months because of this darn Covid19, but i finally got the DV1 clear to demo! I didn't get the same luck or results right off the hop like you did, but im gonna stay on it! I was running full fan, full fluid, 24psi with 1.3 tip. Gonna dial the fan in a bit tomorrow and try around 22psi. We spray Glasurit clear at our shop. That EC530 looks like it lays down real nice👌

[@MOTIVATEDPAINTERS]

When you are ready! I would suggest getting a walcom HTE clear 1.2 you will be in love brother! I sell them on my site and if you don't love it I'll refund the money Motivatedpainters.com

[@PhillipHall01]

@@MOTIVATEDPAINTERS Is this the gun? (I found it on your site). Slim Kombat HTE MP Special edition Nero Sale price$325.00 Regular price$450.00

[@rgomez5683]

Nice job, can a 1.2 tip work as good to spray basecoat on that same gun ?

[@MOTIVATEDPAINTERS]

Absolutely

[@satamanschmidt3428]

Gabe, the pressure on the internal gauge is actually significantly lower than the true pressure at the bottom of the gun. 22 PSIG on the internal gauge is about 29 PSIG at the bottom of the gun. This fact is even spelled on in the DeVilbiss manual that comes with the gun.

[@MOTIVATEDPAINTERS]

Great!! Make sense then !

[@PhillipHall01]

SATAMAN Schmidt I have read your comments before and I have respect for what you say. I have a question for you. In your opinion will a brand new Sata 4000b rp still in the box spray clear as nice as this DV1 clear gun shown in this video? I bought one several years ago and was in an accident and now am ready to use it on a restoration vehicle. I have much to learn though I have done much studying. Thanks, Phillip Hall

[@satamanschmidt3428]

@@PhillipHall01 No, but it really doesn't matter. SATA made, in my opinion, two dog guns the 3000 and the 4000. They got their shit back together with the 5000. If you're doing a restoration the truth of the matter is that a super quality spray gun is unimportant as you're going to cut and buff it anyway. The 4000 will certainly do that job well enough so that after cut and buff nobody will be able to tell what gun you used. For professional painters it matters more as they are trying to avoid cut and buff at all cost. On the car and out the door is what's needed to make money. To a pro the ability to match factory peel or lay it down like glass if that's what's needed matters. To somebody doing a restoration anything better than the $12 Harbor Freight gun will normally get the job done. Everybody concerns themselves with the clear which is the less important of the two phases as the clear can always be fixed with sandpaper and compound. The base is where the money shot really is if it's a metallic. The 4000 is more than sufficient to get both halves of your project, base and clear, done.

[@PhillipHall01]

@@satamanschmidt3428 Thank you very much!!! You have also answered all my concerns about this gun, including base and metallic! Blessings to you! Phillip Hall

[@reyjr3608]

Amazing..Im planning to have one..what do u recommend on cap? C1 or C2? Fluid tips?

[@SkrillMillMusic]

i just got one like a month ago, i mostly use the c2 cap as i find it covers better, but the c1 cap is supposed to be slower but get a more smooth finish, i would recommend 1.3 as a nice all rounder, if you spray really thin clear i would recommend 1.2 (based on what i use) and if you spray very thick clear i would go for 1.4, 1.3 or 1.4 for acrylic 2k gloss paint or non sanding primers, so if you are handy with the fluid knob go for 1.4 and adjust acordingly :)

[@alliho2243]

Hey brother, where you've been? Running out of things to watch here. Looking forward for some new videos.

[@MOTIVATEDPAINTERS]

Hahaha thanks man!!! Got one coming up! Should be interesting!

[@PhillipHall01]

Wonder why you are not a fan of the DV1 base coat? Thanks

[@tedvalencia3904]

Gabe can you recommend me a good mid tier/medium budget gun for base coats and one for clears? I've only ever shot with the $16 harbor freight gun and I want a better one that wont break the bank. It would mean a lot!

[@MOTIVATEDPAINTERS]

Try eBay for tekna prolite

[@tedvalencia3904]

@@MOTIVATEDPAINTERS thank you so much!

[@walterwalters3069]

Hey Gabe between Iwata Ws400 and this one what is your choice?

[@MOTIVATEDPAINTERS]

Walcom hte clear 😂😂 but from those 2 ws400

[@elinaostapenko4396]

I thought you would say Sagola clear but looks like your like now this Walcom better @@MOTIVATEDPAINTERS

[@NuKe11Killer]

What settings did you use during this video

[@Tyler.56]

Hey Gabe what pressure do u set your gauge that’s on wall at?

[@MOTIVATEDPAINTERS]

80psi

[@charlesstevenson1352]

What should the gauge on the wall be set at with to people shooting off of it at the same time.

[@MartinMora92]

Is your fluid wide open? And fan?

[@FernandoDIY]

what clear did you use MS ,HS ? mix 4:1,3:1,2:1??? any thinners used??? come on more information please

[@MOTIVATEDPAINTERS]

Ppg ec530 clear Google it 🤗 it will be alot more useful than me

[@eksine]

you and the gunman released this video about the exact same gun on the exact same day!

[@dovetailup8916]

I caught that also....

[@dovetailup8916]

I caught that also.

[@MOTIVATEDPAINTERS]

Hahaha that is actually so weird !!

[@jonathanbuchan6224]

Hey Gabe, I don't know about the weight thing. I weighed the demo gun I got and it was almost 100g lighter than my 5000rp and pro lite!

[@mcats8]

? The DV1 weighs 480 grams compared to the Pro-lite at 340. No way the DV1 is lighter

[@MOTIVATEDPAINTERS]

Compared to my walcom is insane the difference

[@IratusAngelus621]

No way is the dv1 lighter than a pro light or even a gti pro. Does feel solid and well made though and I like that about the dv1

[@jus1975]

What's the difference between the dv1 clear coat gun vs the base coat gun. And please don't say one is for base and the other for clear

[@MOTIVATEDPAINTERS]

I believe the cap holes might be different. I don't own them so I could tell you

[@David_Creyke]

I wonder if you’re currently running a Tekna Clear is it worth the upgrade. It looks the business 👀

[@MOTIVATEDPAINTERS]

I would say if what you got now works then keep it. But if you are ready to update then do it

[@David_Creyke]

Gabriel Merino thank you sir 🤛

[@radudanielman]

👍👍👍👍👍👍👍👍👍

[@meanpaintandbody]

What psi did u use? I seen paint society sprayed like at 20 psi and it did not look good

[@roofhy4133]

He says and shows in the video, 22psi. And i watched that video also and if u notice their spray techniques were different. The paint society video, he wasnt as close to panel and was moving a lot faster, where as gabriel was closer to panel and was tad bit slower hammering the clear on!

[@trevinopadayachee8570]

What clear is that Hs or ms and the brand ?

[@piratauto7123]

Сколько по цене , такой аппарат???

[@radjadji]

When a job looks that good, do you still polish it?

[@MOTIVATEDPAINTERS]

For nibs yes !!

[@vehiclesprayerssociety]

😍😍😍😍😍

[@ARIASPHIL123]

Where are you Gabriel.

[@MrMelvinkennedy1]

I cant lay down glass, continues to lay down pure glass finish

[@pinturaautomotivojairo4932]

Show, Brasil

[@MOTIVATEDPAINTERS]

👍🏼🤙🏼

[@karlitosortega6430]

Recomiendas aplicar transparente con boquillas hvlp, a cuantas psi tiraste el trasparente???

[@MOTIVATEDPAINTERS]

Como dije en el vídeo ... 22 jaja

[@karlitosortega6430]

@@MOTIVATEDPAINTERSjajajajaja me perdí esa parte cuando harás tu canal en español o por lo menos algunos videos saludos!!!

[@dinotom1]

What clear are you using with this gun?

[@MOTIVATEDPAINTERS]

Ec530

[@moevidas9939]

Saludos bro! Hey what was your settings on the gun

[@downfromthecount3187]

How long do you wait till you bake it?

[@MOTIVATEDPAINTERS]

10ins

[@samsbogh9361]

How much did you pay for that beauty Gabriel? Another excellent video✌

[@MOTIVATEDPAINTERS]

This was a demo! It's gone now haha I think they are 700

[@MrSecyrb13]

They are 700 through my jobber

[@iEvocate]

I got mine for $500 something US for spraygunsdirect a month or so ago. That was for the non-digital version and without the plastic cup

[@samsbogh9361]

@@MOTIVATEDPAINTERS Wow hat's a lot money boss

[@mescalp]

i need a demo DV1 clear coat gun so I don't have to buy anymore

[@rgomez5683]

Did you use 1.3 or 1.4 tip?

[@MOTIVATEDPAINTERS]

1.3

[@branislav9017]

Helo Gab, Dv1, Sata 5500 Rp or Sagola 4600 for clear?

[@MOTIVATEDPAINTERS]

Sagola

[@JHari-qj4lv]

Ws400. Lays. GLASS ,and is faster.. Thats true, since many years ago..

[@adelegentili5318]

🤩🤩👍🤙🤙🤙

[@rybsonb3874]

Can you compare Dv1 to Gti Pro Lite T110??

[@MOTIVATEDPAINTERS]

I would say this is finer spray

[@jeffeaton5221]

@@MOTIVATEDPAINTERS Even with a 1.2 tip & T110?

[@SergeiArkadjevich]

Yeah .I would like to know that too And what aircap equivalent to gti pro lite? What else they could do to it to make it better Probably just put two more holes in the aircap to make it look different. And they changed exterior. But it still the same gti pro ? don't you think so?

[@Ldavidable]

Walcom or DV1???

[@MOTIVATEDPAINTERS]

Walcom. 187%

[@canadianpainter8344]

Hi Gabe. Can you please tell me the setup on that gun, the fan, fluid, pressure at gun . Thanks, Vinny

[@MOTIVATEDPAINTERS]

It's a 1.3 and I explain in the video 😒

[@lewismartin9980]

Need to see you paint a car in a home garage every body doesn't have a paint booth to paint in.Thks

[@MOTIVATEDPAINTERS]

Yes sir

[@dhaley8847]

you said no I dont get guns for free then said I do get guns for free! So.. you do get some guns for free! like most of us think

[@MOTIVATEDPAINTERS]

I got no guns for free back then now I pay for them by making videos so no they are never free. Free died long time ago 🤪

[@splash5974]

12 Iwata fans disliked this video... Not nice!!😂🤣