Dewalt 860 Impact Driver Hands On Testing

Tonight, we test the new Dewalt DCF860 impact driver. Their new impact driver is very impressive, but can it compete with the likes of Milwaukee, Makita, and Flex? We run it through tests that are well beyond the capabilities of most standard impact drivers.
Can it live up to the hype? #dewalt #tooltestraw #diy #milwaukee #howto #tooltesting #tooltest #ridgid #homebdepot #ryobi #wow #impactdrivers #diy #doityourself #diyhacks #DIYEnthusiast #diyhack #knowledge #knowledgeispower #technology #truth #foodforthought #trending #fyp #foryou #homeprojects #homeproject #tooltok #tooltokvideo #shorts #toolswithSoalz #nowwhat #noway #next #howto #howtovideo #howtovideos #dewalttools #lowes #first #firsttoget #honestreview

[@xtrickster6556]

"That suckers big" That's what she said 😆😆

[@DiligentDave1966]

I believe it was the first Dewalt you've ever gotten to drive a 8" lag. It's not the right tool for the job, but still impressive.

[@ToolswithSoAlz]

It was impressive

[@DiligentDave1966]

@@ToolswithSoAlz I still think I'll pass on it. My Ridgid 4 mode has enough power for my needs, and the whole combo was only $180 with the hack.

[@williamobrien992]

Finally, Dewalt UPPING THEIR GAME

[@peterc9166]

Let’s see the 870 Hydraulic

[@user-ny5py1ij4n]

Let's go 870 !!!

[@sandpolice5771]

Just found your videos and have to say very educational. I am looking to get some power tools for work around the house and wondered if you had any recommendations. Like drills, circular saws and things like that.

[@ToolswithSoAlz]

Most brands are good enough to get you by but if you're going to be a professional you'll need to make an investment into something good. Dewalt, Milwaukee, Metabo, Ridgid are all very good

[@ronnypierson1589]

Great video as usual, I hope you’re able to get your hands on that 870 as well.

[@ToolswithSoAlz]

We shall see

[@user-ny5py1ij4n]

870 !!!

[@user-ny5py1ij4n]

And than - " superOil / 887 " !!!

[@alexhudson3574]

watched this tested against milwaukee and the reviewer said the milwaukee had more vibration and the milwaukee got way hotter

[@ToolswithSoAlz]

It's not true. The Dewalt vibrates enough to make my wife happy and we got it to 231° in this

[@ToolswithSoAlz]

Lies are fun to tell

[@williamhansell2678]

I would appreciate a short video on the best techniques for removing a broken tool from the collet. If all else fails, could you partially disassemble the DCF860 to get the broken tool out?

[@ToolswithSoAlz]

You don't need to disassemble the tool. Take a very small flathead screwdriver, place it under the collet, push out, and tap the back with a hammer lightly a couple of times. I've never had one that wouldn't come out that way

[@michaelglynn2638]

Great review, it has guts. Wonder what would drive the half inch bolts in repeatedly.

[@ToolswithSoAlz]

A drill or an impact wrench

[@lrodecw]

It pulled lug nuts off my car surprisingly without a skip 😮

[@nicknick2730]

How’s the vibration in speed 2?

[@ToolswithSoAlz]

I haven't tested speed 2

[@mowork8468]

good shit, brother! 👍

[@ToolswithSoAlz]

Thank you

[@curtisfulton1442]

Awesome review 👏

[@ToolswithSoAlz]

Thank you

[@sswwooppee]

Yeah, I think the 860 clarifies which driver is #1 in the Dewalt line.

[@carl3500]

Doesnt look like it competes with other brands looks like it is in its own category. This is just proof dewalt is the best they never made a impact this string because they feel it's not necessary. And they are right it's not. But they have to please their fans.

[@RcPlayer-tt2vw]

Milwaukee beats still , I think Milwaukee going lose durability now though , I wouldn’t say dewalt in its own class above 👆 though . All pretty comparable now

[@anthonynakhoul6522]

Im invested in both Milwaukee and DeWalt both make great tools however i started to invest in the Milwaukee lineup when i found them to be more powerful in some of their tools

[@KLartrandM]

Im a novice at these cordless drills and impacts. I always assumed impact drivers were for those big lag bolts intil watching this channel.

[@doctorlefthandthread]

Great video

[@ToolswithSoAlz]

Thank you sir

[@alexhudson3574]

why is it that dewalt released this to the asian market first and also the dcd1007 ?the dcf860 is now available here in the uk ? surely they would release it in the us first ?

[@ToolswithSoAlz]

To work put the kinks

[@ianmcquinn8529]

Do you do longevity tests like driving 10,000 screws or something like that? It would be interesting to see when/if each brand fails, then as a follow up what service center provides better service in regards to fixing the issue or straight replacement (I would suspect the latter). I think theres more to a tool then just how fast it drives or what one drives smoother, I use a drill/driver pretty much all day and to be honest I have never really found that much of a difference between any of the "big brands" they all eventually fail from what i have seen.

[@RcPlayer-tt2vw]

I think longevity test really hard because everyone using them different, of course 10 inch screws all day more wear than little screws and the larger stuff can break tools on one shot new or old . Start messing with laws nature shit just breaks sometimes prematurely. I seen other tool channel that’s all scientific with all the measuring tools , he beats them so much like solarz does just more heavy duty tools , but small Milwaukee gen 4 impact we all think is the best has been breaking , after his broke he learned about half the purchases were having issues , he takes gun apart shows why not with fixing just the part have buy whole assembly so if not on warranty throw it out , now I still use brushed Milwaukee, I would not want the gen 4 over the 3 knowing the 3 last

[@SkilledLabor]

Honest question Why would dewalt release it in Asia first rather than the US?

[@ToolswithSoAlz]

To possibly work out the bugs before sending it to America

[@SkilledLabor]

@@ToolswithSoAlz I agree with that

[@DiligentDave1966]

Damn, Robert! You're going to hit 75k soon.

[@ToolswithSoAlz]

I'm doing alright

[@DiligentDave1966]

@@ToolswithSoAlz Joshua may have helped you more than he realized.

[@ToolswithSoAlz]

@DiligentDave1966 always

[@HnrPram]

Waiting this series to enter Indonesian market 👌🏼😁

[@matthewspry4217]

WW2 Thanks for joining the party, better late than never. Love from the UK 😅

[@ToolswithSoAlz]

You're welcome

[@devonboyer626]

I have a feeling these are going to have issues like the Milwaukees over not much time. They make them so powerful but so tiny that they just work themselves to death it seems.

[@devonboyer626]

Great review by the way.

[@THEBEARDEDTOOLGUY]

You have just BEAT ALL THE REALLY Big TOOL CHANNEL S to this they are now all trying to see when there's will come in I think I will wate for the NORTH AMERICAN MODEL too come out I see the COLLET not holding on to the BIT

[@Offgridwilderness]

I guess time will tell, however I did see one test vs the Milwaukee gen 4 and at the end of all the testing the Milwaukee was to hot to hold on top while the dewalt was just warm. This may not be a sign of durability, but keeping cooler under high loads seems positive

[@chucknorris2952]

​@@Offgridwilderness plus it doesnt drain the battery as fast. Glowing hot means high amperage draw

[@joshuafigueroa6]

Looks like a Milwaukee gen3 in disguise 🥸

[@ToolswithSoAlz]

I think it's a lot faster

[@joshuafigueroa6]

@@ToolswithSoAlz definitely

[@budsvilleusa8888]

WOOOO put some respek on DeWALT 😂 great video sir

[@ToolswithSoAlz]

Thank you, sir. Clearly, you didn't watch my short from earlier today.

[@budsvilleusa8888]

@@ToolswithSoAlz oh yeah I did, I saw you use a 6 AH versus a DeWALT 5 AH. So where it's not an equivalent match, I still think DeWalt won 🤷🏻‍♂️

[@MistaHoffinata]

@@ToolswithSoAlzshow some respect

[@KansasTools]

@@budsvilleusa8888 we gotta get you on a multi platform regimen! 😁

[@budsvilleusa8888]

@@KansasTools 😂 hey man I still think they're all good tools brother. To be honest .5 seconds on an impact difference isn't a huge deal to me , very informative though as to what I'm buying instead of buying something random.

[@manuelguardado3240]

Try it with Flex volt battery

[@ToolswithSoAlz]

K

[@theone-ou3gd]

Yea from what I seen on other video it was better battery for it I could be wrong

[@ToolswithSoAlz]

Throwing a Flexvolt on an impact is, for practical purposes, ridiculous.

[@theone-ou3gd]

@ToolswithSoAlz true I only use 2.5 on my flex

[@tommychong1173]

Should really put the test in oak n 1/8 or 1/4 steel. On drill / impact / hummer drill you ever tool you've tried. And well see comes on top. Maybe even 30 day old concrete. Any drill or impact well work in soft pine , of course or cedar. That's how I use my tools everyday. The 885 has serve me well , over the last 8 years. But leaning towards the 845 now. This the newest American model right ? That you get off the shelves at the box store. I dislike shipping, i rather have in hand ,am ole skool.

[@ToolswithSoAlz]

I have tested plenty in oak but people are always going to have some issue

[@tommychong1173]

@@ToolswithSoAlz all I've ever seen is 6x6 treated pine. The only one I've seen do it is Vince from VCG in five gallon buckets n maybe CMU. Because I use it vertical and horizontal. Down around my feet, overhead and setting metal door frames or anything that needs to secured horizontally. And really test them how construction workers / contractors use' em on site indoors n outdoors. I only say this cuz I like your channel and gotta fair.

[@alexhudson3574]

btw im from england and we are the reason you even exist .

[@ToolswithSoAlz]

Really since my heritage is Native American, Russian, Scottish, and Italian. Not to mention it was the Spanish who sent Columbus to the New World. Almost like they don't teach History over there. You can thank us for beginning to end your empire though

[@alexhudson3574]

@@ToolswithSoAlz lol , your heritage must also include english as thats the language that you speak , and yes you did beat us in the war of independance but only due to help from the french , i,m actually half spanish but the countries that they and the Portuguese colonized are now some of the most corrupt and dangerous places in the world and also very poor , every dog has its day we had ours , like every other country , that aside i like your review but why do all reviewers use impact drivers to do things that impact wrenches are designed for ?

[@ToolswithSoAlz]

Well inherited it from a bunch of over stuffed pillow biters who got their backside kicked so hard they never got over it

[@Adrian37203]

Good honest review👍

[@ToolswithSoAlz]

Thanks 👍

[@MR70726]

I hope it's just better than Milwaukee's New Impact Driver ttc just release a video about the latest Milwaukee impact driver is most unreliable

[@ToolswithSoAlz]

They also released a video saying they were using the tool improperly

[@MR70726]

@ToolswithSoAlz they use all the tools improperly and only Milwaukee failed so bad

[@MR70726]

@@ToolswithSoAlz and also their high torque impact wrenches they had to do a recall on all of them now this isn't quite as bad yet but it's getting there

[@ToolswithSoAlz]

That's not true. They also said Hercules failed doing the same thing

[@MR70726]

@ToolswithSoAlz they said it started smoking not failed it also made less power after that

[@tarinmdcclxxvi4407]

“And we’re the reason you dont speak german today” 😂

[@ToolswithSoAlz]

Da

[@j.b.1593]

Yep, goes to show the American education system was just as bad for this boomer as it is now.

[@user-ny5py1ij4n]

Who are "WE" !?

[@andrelindner7019]

Würde ich so nicht sagen, sondern eher die Russen waren der Grund 😃

[@user-ny5py1ij4n]

Ich stimme lhnen zu !

[@alexhudson3574]

lol hope she is ok

[@blind5225]

Это китайская версия импакта. Проблема глубокая посадка биты решается кусочком от хвостовика старой биты

[@ToolswithSoAlz]

I know

[@wadewalker4103]

How loud is it? The biggest complaint I get about my Milwaukee is that it is much louder than the bosses DeWalt.

[@RcPlayer-tt2vw]

He’s just jealous 😂

[@RcPlayer-tt2vw]

Spray little contact glue, make a cloth jacket , you can make it quieter than the boss

[@RcPlayer-tt2vw]

Is this the channel gets free tools to 💩 on makitas 😂😂😂 have you seen the ingroll IH impact ? I just seen on google pop up , has fancy screen on the back

[@ToolswithSoAlz]

I have not

[@TheChico868]

Dewalt brought the heat

[@alexhudson3574]

you helped us win the war but you would not have won it on your own !!! so self righteous , the Russians ,polish , nepalese , indias , candians,australians and many more countries were all in this fight to defeat the nazis

[@ToolswithSoAlz]

You didn't say thank you