Dewalt Atomic Freak?

[@kennycolonsamol]

Love the looks and it seems pretty cool but just for videos and stuff I believe if people start doing that to the 850’s they are going to put the tool through some stress tests that are going to end up in smoke.

[@95fordtbirdlx]

I hope this makes an appearance on the Torque Test Channel!

[@toolinhand]

Agreed!

[@towboatjeff]

Yes definitely wanna see these in a head to head with the Bosch Freak.

[@hectormendoza4158]

Exelente video yo modifique fue un atornillador Milwaukee y quedó súper potente con su cuadrante de 1/2

[@JohnSmith-vp1nw]

This guy ain't got a clue how to review a product

[@TheRook12325]

@@JohnSmith-vp1nw who doesn't? TTC? because he only gives facts and facts speak for themselves.

[@Meme-zc4cw]

Love the Hart hand tools. They actually make some decent stuff for the price.

[@browsebywire4096]

I think I'll try adding one of these to my DCF 840. I use it as a truck impact for tore changes.

[@M_E_T_R_O__9]

love this!! - i was just about to ask WHERE YOU GOT IT, then i watched the rest of the video :D

[@AntonioClaudioMichael]

Dewalts collate is sweet I like that Dave @Man Caver Tools

[@Andrew-hh3ol]

I converted my Bauer impact drivers like this for specialty uses i needed to run ultra deep 9/16 sockets for fence panel clamps but they were half inch drive and snapped hex adapters regularly so i put a similar anvil into several and they hold up to my uses

[@swiftluss4272]

This is badass! Keep it up!

[@mmuhiuddin]

Small recommendation for future: have the inset face-camera on the top right so it doesn't cut out any of the work.

[@enlamiramxes]

can you do a dcf 961 1/2 to 3/4 conversion?

[@ronin18D]

This is just AWESOME! Coould you do a Metabo HPT 36V Triple Hammer Impact Driver??

[@ManCaverTools]

more moded tools will be coming up :)

[@dalenolt6359]

I swapped out many 877 impact drivers to 3/8. I also did the 845, but my new favorite is the dcf 860 I swapped it to 3/8 drive it makes a lot more power than the other models

[@paedahe4975]

This is some great content. Well done.

[@ManCaverTools]

I thank you Pat

[@Dnasty1]

Bro excellent video. You helped me make what I think is the strongest 1/4" drive impact wrench. One thing I did notice is that it is much louder than most the other tools after you do this mod. Even than the standard 1/2" impact wrench. Did you notice this? It makes a more high pitches screeching noise.

[@diablo21st]

Nice work 👍

[@tootightconcepts747]

I wonder how long it’s gonna take for dewalt to start selling them like that

[@AntonioClaudioMichael]

The new Ryobi Hp rotory tool is bad ass it has a Ratcheting Chuck for faster changes been loving the new one I also have that rotory tool it's good @Man Caver Tools

[@ManCaverTools]

I need to get that Ryobi Rotary hammer drill

[@Gerson868]

No Brasil temos somente a linha de parafusadeiras bosch com esse drive de encaixe para ambos 1/2 e 1/4 no mesmo equipamento que vejo sendo vendido nas lojas.

[@huntercook6605]

Hey, hope you see comments on old vids...the link to the part isn't in the description anymore, do you have a part number I could look up?

[@AntonioClaudioMichael]

Nice that the tri light is easy to remove from the dewalt compared to the Milwaukee didn't come off @Man Caver Tools

[@chrisschott6455]

Curious, the bosch had the red collet ring to pull to lock the 1/4" bits in. How do you do that with that anvil?

[@ManCaverTools]

this is just magnetic. a video of this tool will be uploaded soon

[@SkilledLabor]

Cool video. Question.. will you ever try and get your hands on CAT cordless tools and see what they are all about? Haven’t seen much on them but supposed to be good quality. Just a thought. Keep on rockin the vids 👍

[@ManCaverTools]

I can look into the CAT tools

[@Jtwizzle]

The graphene battery is the most interesting thing from them. If it lived up to the claims it could be great.

[@SkilledLabor]

@@Jtwizzle agreed

[@El_Diablo_LI]

​@@Jtwizzle supposedly that graphine battery is a little misleading. It's really lithium ion batteries with a graphine coating so was not really what we were expecting. Such a let down.

[@WC3fanatic997]

I mean, I'm glad it's such a powerful little monster, since I got one in a combo pack a bit ago, but at this point I'd just use the DCF921, personally

[@MuhammedsWorlds]

very good bro

[@michaelanthony3216]

Im having problems with my swap on my dcf850. My anvil is flippity floppity in the housing and cannot figure out why i didnt see you use a snap ring on the anvil or anything

[@theperfectpaintertoolreview]

Pretty cool but how many impact wrenches do u need lol

[@luisinhoens90]

DeWalt Freak vs Milwaukee Frankenstein vs Atomic DCF921, pleeeeassee

[@mike_t_007]

Can you do a vs demo with it like you did with the M18 Frankenstein vs the M18 Stubby video?

[@AntonioClaudioMichael]

Freaking Slick bro @Man Caver Tools

[@ManCaverTools]

I thank you sir

[@icyrene1]

What size torque socket to open the body? Thanks

[@ManCaverTools]

this video is old, I forgot off hand

[@462ANIMAL]

Yeah buddy! 👍

[@8power0]

VERY COOL ,,,,,,,,,,!!!!!!!!!!!!!

[@peterc9166]

Could you change that on m12/ m18 surge

[@ManCaverTools]

as long as the anvil fits you can.

[@gabrieldesousapereira9893]

What are the measurements of this 1/2 adapter? Do you have any Aliexpress link?

[@CoreyGrandma]

Is it possible to put a 3/8 anvil on a gen 2 m12 fuel impact driver 2553-20

[@ManCaverTools]

yes it is and you dont even need to bore out the hole for that

[@CoreyGrandma]

@@ManCaverTools do you have a link to the correct anvil to use? Could you make a video?

[@ManCaverTools]

@@CoreyGrandma I thought I put a link in the video description

[@ManCaverTools]

the 3/8 in anvil you need to ask from Philly fixed since I didn't do that one

[@benzokley3291]

Amazing! Very very strange choose. Why not DCF 922 ?? it is twice better then DCF850, because the 400Nm vs 200Nm. And maybe the 17.8 mm from the manufacture. Also the same weight almost.

[@fredhardchoc8388]

Hi got a dewalt question. You guys in the US got news about the new powerstack 5ah yet? We in Scandinavia has got some commercial about that yesterday on youtube. Seems legit. You can search for "POWERSTACK 5.0AH BATTERI NEXT DIMENSION IN POWER"

[@ManCaverTools]

not yet, we see what Europe is getting. I am not sure when we will get hose in

[@techreview291]

Just wow 😮

[@ManCaverTools]

I thank you sir

[@alanmarasigan3232]

i used the WORX anvil WU279 on my atomic dcf809 it is straight swap no modification

[@charliechang9mil]

Sick!!

[@stormtime345]

Would this fit directly into a 1/2 m12 stubby??

[@jonathanviborg4229]

Would like to know this aswell

[@Griffinwoodworks]

So how does it release the bits without a collet ring?

[@ManCaverTools]

its magnetic

[@ManCaverTools]

test video is coming soon

[@hernanbones422]

Did u install the magnet or do the new freak anvils come like that

[@nonamegiven5744]

Nice! 🍺🎸🤘

[@ManCaverTools]

I thank you bro

[@alexisgarcia4000]

Y vídeo de prueba ?

[@promobass77]

3/8 or 1/2?

[@walterbwd]

Can I put on of thoes on a dcf923

[@walterbwd]

The 3/8 atomic impact wrench

[@mattdrake2065]

I want one…

[@golfmc78]

Would this work on the dcf887?

[@ManCaverTools]

we will have to find out :)

[@cocor3000]

I want one!!

[@ManCaverTools]

its an awesome tool

[@cocor3000]

@@ManCaverTools I can totally tell from the video, I'd try to convert mine, but I have every confidence I'd nuke it and get stuck buying a new one and still wouldn't have this one. Great video though.

[@tonmc5411]

What kind of anvil is that,?

[@browsebywire4096]

He's got a link to ebay under the video.

[@yunusorak6070]

you should have 1/2" to 1/4" adapter

[@theturkman86]

Anyone know if this will fit the DFC801 ?

[@browsebywire4096]

That's a good question. This would be great on a 801, or 901, or 923. A stubby that can do hex or anvil would be great.

[@skoparweaver7692]

You don't need to dremel anything, but it does take some finesse. An awl (like one that comes with a leatherman for piercing leather) and a screwdriver will allow you to pop both of them off. Just don't do what I did and stab your finger deep. Still bleeding as a write this.

[@ProblemChild-xk7ix]

Don't care for the picture in picture. It is a distraction. Your videos are better without it.

[@ManCaverTools]

it was a live stream that I shortened for this video

[@kassscarter4420]

Man, tools and working with them, it's not yours.. I almost fell off my chair from the clamps..

[@xtiantab]

Your Onlyfans is 🔥🔥🔥

[@DiligentDave1966]

I hope the warranty is expired because you just negated it.

[@ManCaverTools]

Warranty Gone lol