DeWalt DCF510 20V Sealed Head Cordless Ratchet Review

This is the newly released DeWalt DCF510 20V Max Sealed Head Cordless Ratchet. You get 2 changeable anvils in 3/8" and 1/2". Two spring-loaded detents keep the anvil securely located, so you can use any typical sockets.
DeWalt DCF510B 20V Cordless Ratchet: acmetools.pxf.io/Mm24gn
DeWalt DCF510GE1 20V Cordless Ratchet Kit: acmetools.pxf.io/KjORge
Keep current with our great content:
KZbin: / shoptoolreviews
Instagram: / shoptoolreviews
TikTok: / shoptoolreviews
Facebook: / shoptoolreviews
Twitter: / shoptoolreviews

[@acappellahymns]

It should be noted - the 75 ft lbs of torque that they advertised on this is tightening torque, not break-away. Would be good to see if it lives up to the advertised specs.

[@farmertyler8087]

Torque test channel tested it and if I remember correctly it was able to do a little over 75ft lbs

[@PeckerwoodIndustries]

Yes a pass through socket set would be good as well as a 1/4 anvil.

[@Modine.]

Hey Tim, maybe DeWALT got that torque number from tightening not loosing bolts. Can you try running a bolt down all the way and then check what the tool tighten it to?

[@Star08273]

correct. max torque is in the forward position because it has that "running start"

[@jacksmith2315]

I just looked up the spec for the milwaukee inside adapters, they are .63 as well, so the insider sockets should fit this as well.

[@2010challengerRT]

Just a big drop of videos all at once from you guys lately. Love it.

[@simoncaumartin8353]

Tim your on fire lately, pumping out good vids one after a another. Good quality as always. Thanks for the content

[@georgedobbs9216]

Lots of tool review channels come and go, but Tim Johnson is still out here producing quality content.

[@bmg5015]

I love these tool reviews including testing. Keep up the good work. You are doing great.

[@Bamamike223]

Best part of the video is the LED Tape Measurer plug. Slick!

[@bill_de7206]

Just discovered your site and subscribed; really helpful. Thx

[@AntonioClaudioMichael]

I love the dewalt toughbuilt Led Tape measure carry mine everyday comes in handy under vehicles doing custom Bumper and skid plate work 9:10 @Shop Tool Reviews

[@5MURF0]

I ordered this kit and they are advertised with 2 Powerstack batteries. I only received one so i got in touch with the company i purchased it from and then they forwarded the message to Dewalt, should be receiving my extra battery soon. That was my only issue. Other than that its a great tool.

[@gammagonad1657]

Where did you order it from?

[@5MURF0]

​@@gammagonad1657I got mines from CPO Outlets because at the time it was the only website with the 2 batteries, and it was faster free shipping but also ACME Tools has it.

[@solomonshv]

i got one from acme tools for $160 yesterday. sitting here waiting for it to arrive. i hope they make a 1/4" attachment for it

[@gammagonad1657]

I paid $249 for the kit shown, During Black Friday sales

[@ShredworthyDave]

Always great reviews tim

[@luatngo5408]

Thanks Brotha for the review

[@AntonioClaudioMichael]

Reminds me of the New Milwaukee M12 Insider Ratchet @Shop Tool Reviews

[@slingin_tires]

Great vid! I'm getting mine from my Mac dealer next week. I already have the 12v dcf500 sealed head. As a mechanic i would never go back to the older designs.

[@marknogueira6425]

Im looking to buy one. Im not in the dewalt 12v line but im on the 20v and want to know someones comparison on both. I mainly looking for 3/8 so i dont mind the 1/2 and 1/4 even though i would use 1/4 more. But if you were to get one which would you pick?

[@slingin_tires]

@marknogueira6425 I'd say if size doesn't matter go with the 20v. It does have more power. But the 12v is faster and smaller. They're both great options really. I have both now!😁

[@n6dl321]

I still have a Craftsman C9 gearwrench passthrough flavor. Nice to see other alternatives. Now ya need to check out Milwaukee's version

[@brockhunter2021]

Love it and my new dcf500 sealed head!

[@chucknorris2952]

Which of the 2 is most used? Buying one soon

[@mikemccown1847]

Nice job on Dewalt 20V

[@AntonioClaudioMichael]

I do tend to like the Torpedo Battery Ratchets better but i been liking my 20v and 12v dewalt Electrix Ratchets i will definitely pick one of these kits up i like they provide with the kit a Oil resistant power stack battery 5:28 @Shop tool Reviews

[@donnysanner342]

Another great informative video as always. I’m a material handler technician ( forklift , order pickers , reach trucks etc) and the engineers gave no shits about us mechanics. I welcome all of these tools getting smaller and stronger because we all know the limited work space we have to deal with…do they make a 1/4” insert for this ? Thanks

[@slingin_tires]

The 12v version comes with a 1/4" and 3/8" anvils. Model# is dcf500

[@juanc5149]

I wonder if the Milwaukee sockets fit?

[@Orrphan]

The big question for me is, does the tool have a spot to store the extra anvil?

[@slingin_tires]

Torque means a ton to me here in the rust belt. A ratchet that can't run it out even after it's broke loose is useless to me.

[@2down4up]

It sure looked like it was jerking your hand a bit during tightening. I’m pretty sure that torque rating is measured during tightening not breaking free or loosening.

[@romanrereizer5416]

Hi! Can this tool be used manually, like a regular ratchet, or only automatically?

[@Deathpixie3]

Ooo now this is interesting, a lot like the Mac interchangeable air ratchet

[@mikethetoolman8776]

based off same head design mac and dewalt same family of companieses

[@EdwardVelez]

I would love to hear your opinion on which you think would be the best out of all the ratchets that are on the market. For example, best performance and best bang for your buck

[@KLM_AUTO91]

Hi friend, can you set a 1/4 adaptater in this ratchet ?

[@FixitFred]

My question is on the Milwaukee insider and this ratchet can the hex socket be used as a socket if so what sizes are these hex sockets on both tools. Or is this again manufacturers instructions/warranty

[@jacksmith2315]

He said the hex is 5/8-16mm. Not sure what the insider is, but im sure the info is somewhere. Would be cool if the insider sockets fit, but i wouldnt expect them to since its 2 dif companies and dewalt may have plans to make them. Would be silly not to

[@jacksmith2315]

I just looked, found one of the adapaters, looked up the spec, length and width are both .63, height 1.51. The adapter for the dewalt is .63 according to his caliper, so the milwaukee ones actually should fit.

[@johnlebihan6628]

These tools are going so fast now that when tightening we need an auto stop function just like in the impact wrenches.

[@strawberrymochiiz]

Found the kit with ratchet, 1 power stack battery and charger for $249. I might have to pick this up. Since it's $349 every where I checked.

[@tomcao4382]

Lowes have the same kit with 2 power stack & charger for $279.

[@rrt08]

​@tomcao4382 with military discount it's $251.00 at Lowe's DCF510GE2

[@gammagonad1657]

I definitely picked one up for $249. I’ve only used it on one automotive project but I love it so far. I didn’t even realize you could switch the anvil around. It keeps getting better. Hopefully they do release those sockets, as well as a 1/4 anvil, then I’ll be in tool heave 😜

[@kingisaac21]

You should review the new kobalt cordless ratchet

[@stewartxp2400]

I seriously hope DeWalt is working on manufacturing pass through sockets that can be inserted into this and their dcf500 model to compete with the new Milwaukee insider that has a big advantage over this. I was actually about to buy the DeWalt until I saw that Milwaukee with the passthrough sockets.

[@socialex]

Only certain sizes pass through for milwaukee

[@user-dd8ez1qi9w]

he didnt torque down the bolt with the dwalt, then take the torque wrench and check to see if it tightens down to 75 ft lbs.

[@AntonioClaudioMichael]

Nascar style Lmfao I call That a Neutral Drop When socket is spinning and You slam it on the fastener to break it free Good testing @Shop Tool Reviews

[@mikeburchett-bs3qw]

if they would only come out with 20 volt long reach ratchet

[@nickvasquez8054]

Same I'd like a long version of this

[@user-fx3fu1nc1r]

Im liking the switch

[@pete1323]

Running starts with these cordless ratchets are practically a requirement in the shop. If it can’t survive, in the trash it goes

[@scottbionicnerf8727]

Those low profile sockets you were talking about.... Not sure about that, cause Milwaukee doesn't produce anything without 2 or 3 different patends on it, such as those low profile sockets that come with their pass-through cordless ratchet. Yes, I know, I'm not commenting on brand spank'n new video.😎 But, Algorithm.!? That being said, and having already used both, and being already established on both Milwaukee platforms. I have the old Milwaukee 3/8"-small head(cause it gets into small places. And bought it specifically for that purpose, not for it's power.)I'd rather Milwaukee bought the DeWalt head. I'm gonna be getting the DeWalt. This is a Complete Kit. That's also a great way to get people established on your battery platforms. I'm also gonna get the DeWalt 3/8" 12v ratchet, though I forget the model #. Guess I lost some nerd points for that. I'm also curious if DeWalt has or plans to release 20v 90°(I know everyone calls them 'Right Angle') impact which I'm also in the market for this year.. Between Milwaukee, DeWalt and SKIL, I'll probably drop close to $5,000.00 on tools this year, because I'm cutting the cords, and air-hose wherever possible or practice to do so.

[@Nikolay-YUV]

Honest review *****

[@randallsensenig1075]

Very nice! I’m excited for the 12v version, it’s supposed to be much higher rpm but less torque

[@brockhunter2021]

I have the new 12v dcf500 and it’s double the rpm and more torque than the first gen 1/4 12 and about the same torque as the 12v 3/8

[@randallsensenig1075]

Oh wow! Good to know the torque doesn’t change much👍 hopefully I can soon get my hands on one!

[@brockhunter2021]

@@randallsensenig1075 absolutely you’ll love it. I posted a video of it here on KZbin.

[@mikethetoolman8776]

best cordless ratchet made by far currently

[@martylucas8557]

@@mikethetoolman8776, you’ve used the new Milwaukee M12 ratchet then, correct?

[@jeffreycole2816]

If dewalt made a low profile socket set that plugged directly into this tool without having to use the anvil I would buy it instantly. that would be amazing.

[@dylanballard4165]

the milwuakee insider is hwat your looking for lol

[@jeffreycole2816]

@@dylanballard4165 It has to be dewalt.

[@gammagonad1657]

@@dylanballard4165 I looked at that tool before purchasing the Dewalt, this one just seems to be so much better made, plus it is a lot more powerful(on paper and in the real world). Definitely powerful! A Milwaukee fanboy just won’t want to hear it though lol.

[@nikkapubess3349]

That kick from those electric ratchets looks like they'll break your wrist. Lol

[@bossmanz28]

Like some1 else said i think the torque # for ratchets may be the tightening spec not loosening and probably with the nut having jus a little time to build up speed not finger tight snug already

[@Shoptoolreviews]

No, that's not the case. Tightening torque is always much less than breakaway (loosening) torque due to the increase ramp (threads), and the continual increase in friction as the nut tightens. Thanks for watching.

[@bossmanz28]

@@Shoptoolreviews i get that with impacts. But its jus a ratchet. Like it doesnt develop its torque without the speed already going cuz it doesnt have a hammer and a spring inside the housing. Like you said if you get the socket fully spinning full speed then put it onto the nut or bolt it will break free alot more. Definitely not good for your sockets tho. Idk tho im jus guessing

[@dchawk81]

​@@ShoptoolreviewsYou already proved it yourself at about 15:20 when you ran everything down and then torqued to 100. You barely had to move the torque wrench.

[@buildingsalvage]

It’s literally a ratchet not an impact it is definitely tightening torque that’s being quoted not breakaway

[@ask43242flight]

Can I use DCB203: 20V MAX XR Compact Li Ion Battery (2.0Ah) for this ratchet? Thanks

[@slingin_tires]

Yes

[@skygreen5939]

maybe an optical illusion, but that toolbag looks like it has a new (longer/slimmer) aspect ratio compared to the current dewalt toolbags (maybe about as wide as their 11" bag, but as long as their 15" bag?). very cool if so

[@Laubz]

Biggest onock on the flat battery is the handle. Ive got larger hands and that battery pack is in the way

[@mg8718]

Will my DCF900 Charger charge this battery?

[@slingin_tires]

Yes

[@ck7cu]

As a regular consumer of Dewalt tools i hope in a future update they make this compatible with both 20v/12v system battery.

[@slingin_tires]

It IS 20v!!

[@txvet7738]

Not bad if you’re on the DeWalt platform but it seems to me like a 20v version of the Milwaukee M12 Insider ratchet.

[@Lee-lb9qh]

DeWALT ain't gonna sneak nothing past you, you're just way too smart for that, you're like one of those smart people I've heard about 😂

[@brianhall9019]

I’d pay the extra $50 for the Milwaukee and get extended reach, the pass thru sockets (8-19, 21) and two lights…but I’m also a Milwaukee whore!

[@slingin_tires]

But it's still not sealed head and has less torque.

[@jascospeed]

​​@@slingin_tires did you see the Milwaukee insider video from this channel before you commented? More torque? No DeWalt couldn't do 40 ft lbs without a running start ! Insider comes with pass through sockets which are awesome for all thread all long bolts. Also comes with adapters for regular 3/8 or 1/2 inch sockets. The Milwaukee is More low profile and is an extended reach too! Milwaukee nailed it and DeWalt just came up with the huge head instead...

[@slingin_tires]

The DeWalt is pass through too they just didn't make sockets for it yet. And definitely has more power!! Now dry your tears fan girl. Thanks for the laugh tho! Hahaha 😂😃😂

[@DependableAutoTruck]

How tight will it tighten a fastener

[@Shoptoolreviews]

With just the power of the ratchet? Probably 25-30 ft-lbs. You can use your own physical force to go past 100 ft-lbs. Thanks for watching.

[@elihamou6902]

Watch at 16:15. Guarantee you those are way more than 25ft lb. As a mechanic you can tell..I would guess 50+.

[@Pro1er]

Craftsman used to have a pass-through ratchet, it was made by TTI so I'm surprised that Ryobi doesn't make one. There have been a few occasions where I had to run nuts down an exceptionally long bolt and a pass-through design would have been awesome.

[@georgecypher4568]

Pretty nice ratchet but ....... They give you a 3/8 , 1/2 Anvils ....why not give you a 1/4 anvil as well . I get it...... They will prolly come out with a 1/4 stand alone ratchet...... but for the person who would like to use the robust style ratchet and smaller socket use . I know i would like to use all three anvils if i picked it up for myself .

[@mikethetoolman8776]

12 volt has 1/4-3/8 and bit driver inserts

[@evandrewmartinez1]

This thing would probably strip or break most fasteners that you would bust out a 1/4 ratchet for. I say that owning the older 3/8 20v model that I'm sure makes less power

[@toolsdealsautomobiles6980]

The question we're all thinking is the sealed head ratchet vs the new Milwaukee

[@slingin_tires]

The sealed head is better overall. More torque and better direction switch.

[@michaelchristopher8266]

@@slingin_tiresthe Dewalt is giant, anybody who works in a professional environment is gonna take the Milwaukee because it is faster and smaller.

[@slingin_tires]

@@michaelchristopher8266 Yea well they make a 12v version too. It's smaller and comes with 3 different anvils.😁

[@michaelchristopher8266]

@@slingin_tires the head is still giant and the battery is awkward. Mac tools sells a ratchet that uses Dewalt batteries, and it is a much better design the head is smaller and the battery is out of the way. The Dewalt ratchets just aren’t designed well.

[@slingin_tires]

No the head is within 1/8'' of Milwaukee's high speed. I measured. And it has 450 rpm as well! 💯

[@GTRliffe]

it’s not a “running start” it’s the tooth being in the correct position!

[@cjball9532]

It's like almost using a Air ratchet.. But cordless

[@AntonioClaudioMichael]

No way it's getting 75 foot pounds at a 300 Rpm Speed should be a slower speed for higher torque @Shop Tool Reviews

[@scottbionicnerf8727]

The 'Sealed-Head' design does a lot, from keeping dust, grime, trash out! While keeping grease/lube inside, along with reinforcement. 3 HUGE PLUSES. Gentlemen..... sorry, I meant 'People' don't need any pretty lady techs hunting me down for a comment I made. This is why you rubber boots on some air powered ratchets that didn't use the 'Jacketed-design', though a rubber boot offers zero reinforcement.

[@hlpang1075]

Torquing the bolts to 70 ft lbs does not mean it takes 70 ft lbs to break them loose.

[@m.t.v.7934]

If you HAD to pick one, one to use for the rest of your life would it be #1 or #2? 1. The DeWalt 2. The M12 Insider Ratchet Let me know if you see this comment. I really love the channel and trust your reviews.

[@XerxezsX]

Milwaukee beats them with long reach extended ratchet, not even close. This DeWalt is $400😁

[@hexchad765]

The tool only is 250

[@alexi.de.charle]

I don’t think DeWalt makes tools for lazy people- there is nothing wrong with breaking the nut FIRST and ratcheting the rest off 😂😂😂😅 *and the torque value is tested at tightening, not loosening (NOT advertised as a breaking bar ratchet)

[@v.simonson5170]

I’ve had the worst luck with everything brushless from dewalt. Love their brushed line, but man are the brushless giant piles of unreliable poop.

[@slingin_tires]

@v.simonson5170 Sorry you've found it that way. I've had extremely good reliability with mine.

[@ryanchristopher2207]

I just have to say cuz I hear people get this expression wrong all the time. When expressing that you don't care much it's not I could care less it's I couldn't care less because if you could care less that means that you care more than you necessarily need to but when you couldn't care less it means you care to the minimum of your ability. I couldn't care less because I pretty much already don't care.

[@operator8014]

I've spent years trying to fix this problem in people. Sorry man, they'll never change.

[@elmateo487]

I could care less

[@ryanchristopher2207]

@@elmateo487 well thank you. It's nice to know that there are some people out there that care about the things I say

[@Brandon-du9xz]

All I can say is thank you and Please continue to raise awareness

[@davidgonzales9591]

I could care less

[@teelee8760]

I guess dewalt team has never worked on cars before because that battery size will be a nightmare to work with. If they make a smaller battery it would be better

[@Kylewraps]

The normal (non power stack) batteries are like half the size I have 2 of them one for my hand drill and one for my “My4Sons” backpack sprayer

[@slingin_tires]

@teelee8760 You're absolutely wrong. They work just fine!

[@teelee8760]

Have you guys ever hold the Milwaukee m12 ratchet with the compact battery? You'll see the difference. That's why many people choose Milwaukee over dewalt.

[@slingin_tires]

@teelee8760 I care about torque because i live in the rust belt. I've proven DeWalt's to be the strongest. 💯😃

[@donayre21]

I need a wife.

[@roberthayes6329]

Batteries??? Garbage! If thats the crap that were supposed to buy then I choose hand tools I already got.

[@yomi7827]

Compre un DCF 512B y me duro solo 15 minutos, escasa mente lo prendí 👎🏽

[@ricksgiggle8852]

🔴🔥 HARD PASS! IM ALL BLOODY! #AllRedEverything #Milwaukee #EverythingMilwaukee Milwaukee Insider Ratchet BEATS this ALL DAY! ❤

[@slingin_tires]

No it doesn't. The only (advantage) at this point is that it's long reach. DeWalt's has a better direction switch and more torque. Oh and it's even sealed head!

[@hithereperson8137]

Dewalt instantly to copy milwakee 😂😂

[@slingin_tires]

Kind of but DeWalt had announced theirs first. Besides it it being sealed head and having more torque.

[@johngrawey7039]

Ratchets are not impact tools

[@p__jay]

can you please include metric units besides your weird freedom measurements that nobody but you is using....or do you hate the rest of the world and dont want international viewers?

[@jetsetjoey]

I bet he'd love to have more international viewers, just not the crybaby ingrates- such as yourself...

[@thebluelunarmonkey]

Long time in the making. Too long. I bought the ryobi+ long neck 1/4" and 3/8" quite a while ago.