DeWalt DWE7492 working station

[@yonathanevan3334]

You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzbin.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.

[@oxonian4518]

Congrats. Neat work.Tks for sharing.

[@LordHog]

Great job on the build. Hope to see more

[@mmposhumer2535]

Thx

[@annacraft]

Gut gemacht! So ein Unterschrank ist eine echte Aufwertung. Ich habe mir für die Säge auch einen gebaut, aber eine ganz simple Konstruktion aus Latten genommen. 🙋🏻‍♀️Anna

[@mmposhumer2535]

Danke!

[@Chris-wu8ft]

Top! Can't wait to see your next projekt🤜

[@ranyalbegwein7470]

Thank you very much for sharing!

[@bazajow]

After reading some of the comments that it is not the perfect table saw I have decided not to purchase it but to wait for any improvements if there is an another updated version.

[@anthonyhitchings1051]

I ordered my Bosch job site saw with the extension supports for outfeed and side of table

[@James310193]

It is funny how little information on the 7492's dimensions is available. Heck, even their O&M manual does not provide any detailed dimensions. Could you be so kind as to help provide the dimensions of the table saw? i.e. LxBxH (up to the tabletop incl., including the tape measure and excl. the pinion & rack system) and which length is the front-facing side (the power button side)

[@soarebv]

👍

[@anthonyray5515]

Well, that was nice. What do you plan to make in the next five years? 🤔 Who were you speaking to in the doorway in the second video? Awe! Cute puppy! Does puppy do tricks?

[@mmposhumer2535]

Mate, I have no clue what I do tomorrow ;-). Mailman? Sure, she can dance on a slack line! :-D

[@martin-f5482]

like it! which kind of wheels did You use?

[@mmposhumer2535]

75 mm diameter... found them somewhere on amazon

[@sophakamasomdaka3066]

Thanks

[@dcabaddon]

Schön gemacht! Was hast du denn für eine Arbeitshöhe? Wirkt auf dem Video arg niedrig... Welches Sägeblatt benutzt du und kannst du es empfehlen?

[@mmposhumer2535]

Danke, ich bin auf ein Höhe von 86 cm gekommen, und ja vielleicht könnte ich eher Richtung 90-92 cm steuern. Kreissägeblatt - ist auch eine DeWalt DT1957 48 Zahn.. bei dem Plattenmaterial funktioniert sehr gut!

[@amaurialves76]

Parabéns! Vc pode disponibilizar o projeto? Obrigado.

[@earvinpitogo3070]

amazing

[@simonpark3119]

테이블 사이즈는?

[@luiz6580]

Na realidade a Dewalt não está preocupada em fornecer uma serra de bancada TOP: -Mudou o isolamento interno de pó, mesmo assim a máquina solta muito pó. - É uma máquina barulhenta. - O consumidor não tem a opção de comprar esta maquina na tensão 127 volts. - Não tem freio de disco - Goniômetro com folga. - Não tem opção de tamanho de flange engessando o consumidor de comprar discos de corte de outro tamanho (Deveria vir flanges de furo de eixo de outros tamanhos de discos como acessório). - A régua de corte é desajustada. - O manipulo de regulagem de angulo é muito duro, bem como não é confiável. - Não encaixa disco de 254 mm, apenas de 250 mm.

[@enshongmiranda]

what's the length of the bolt to secure the tablesaw to the stand?

[@mmposhumer2535]

80 mm, if you can get 70 mm it will also be enough...

[@zaragoza6413]

Cuento cuesta este por favor

[@luiz6580]

In reality Dewalt is not concerned with providing a TOP bench saw: -Changed the internal dust insulation, yet the machine still releases a lot of dust. - It is a noisy machine. - The consumer does not have the option to buy this machine at 127 volts. - No disk brake - loose goniometer. - It doesn't have the option of flange size, plastering the consumer to buy other size cut-off wheels (shaft hole flanges for other sizes of cut-off wheels should come as an accessory). - The cutting ruler is misadjusted. - The angle adjustment handle is too hard, as well as unreliable. - It does not fit 254 mm disc, only 250 mm. When you turn the motor on and off, it strangely "sparks". DISAPPOINTMENT! The industries, both Bosch, Makita, Dewalt etc are the same disrespect with the consumer. Adilson you are right! Enough of watching videos of KZbinrs putting their hands on the heads of saw manufacturers just to beg and beg for a shut up and for the sake of the trash!!!!!!! People who sell themselves to the manufacturers of saws and tools in exchange for "jabá". The reality is only one, for the tool manufacturers, we are considered third-rate consumers, not to mention the lack of safety and quality! We cannot and must not accept these equipments and tools without quality, safety and respect to others, it is the lack of maturity prevailing over reasonability, common sense, ethics, safety and respect! We cannot accept that they treat us as third-rate consumers, disowning us and making us consume products without quality. We don't have to accept what the manufacturers want to sell us and push down our throats, precarious, limited machines, which fall short of our needs. Today, the market has a need for portable saws with better quality, as well as features and safety. This "talk" and justification of the industries that these machines are for construction sites only serves to discourage them from launching better saws. Year after year, the so-called "new" machines have no effective advances and improvements. It's the same old thing, the industry's accommodation. What really changes is only the price, always more expensive, without significant improvements for the consumer! Translated with www.DeepL.com/Translator (free version)

[@maya_mashi]

😊👍

[@mmposhumer2535]

Danke!

[@wernichtscharneck5368]

Can this take a dado stack

[@mmposhumer2535]

To be honest i do not know… i read / heard somewhere that they are not allowed in Europe and I was not investigating any further. And sorry for a late reply, holiday season 🙂

[@wernichtscharneck5368]

@@mmposhumer2535 thanks, so after watching your video I bought one. Super machine. To answer the question yes. Can take a dado stack but banned in Europe. I'm from Africa

[@guidoengbr]

Please, share the dimensions with us.

[@Evil_Clown_3DIY]

Schweinegeil geworden, gibts dafür evtl. Pläne und wenn ja, würdest Du sie vielleicht teilen ? Hab mir nämlich gestern die Säge bestellt. Btw. natürlich gelikt und das Abo dagelassen. Gruß Jari

[@mmposhumer2535]

Danke Dir, leider keine Pläne - habe es mehr oder weniger aus dem Kopf gebaut...