DeWalt vs Milwaukee | Which Toolbox is Better?

[@BradshawJoinery]

Amazing video work and you are a natural presenter! Thanks for the mention, drawer systems are amazing, cannot recommend enough, the biggest influence for me was if I could fit my power tools into them and the longer drawers of the DeWalt worked out best!

[@JonaShone]

Loved watching your video mate! Could do this one without the shoutout, thanks for the compliments - my presenting is all salvaged in the edit 😂

[@patterrick1]

this channel is the reason I was able to find and organize my tools. Made my work so much easier. Thank you so much

[@JonaShone]

You’re welcome Patrick, what tools did you organise?

[@alexegus71]

Foam youtuber expert, you are amazing. Your foam work is a beauty. When i grow up, I'll make the time to be as amazing as you to organize my tools like your video

[@IAAITKEN]

Would be interesting to see a comparison and what your thoughts are for best sized drawers for hand tools. Tough 2 drawer, 3 drawer and Packout 4 drawer. Not seen much on individual drawer sizes but the 2 drawers look too deep for hand tools but nothing really showing them side by side.

[@gavinkinsman8921]

Have toughsystem ,bought my daughter a packout which I prefer. I am going upgrade next summer to full drawer toughbuilt. Looking forward to full drawer system. I hope shadow foam does inserts for the toughbuilt.

[@JonaShone]

We will do! We’ve done the rough system and we are always looking to extend our lines! 👍

[@iplayzthegames6968]

I haven't got mine organised in foam yet but even just switching to the three drawer packout has made my work so much more efficient, I'm not diggin through a crate full of hand tools to find what I need and I can see all the tools I have easily. The locking handle is brilliant for transport as well, don't have to worry about them coming open while driving round

[@Oneguygarage]

Thanks for your reply. I like the video

[@JonaShone]

Could agree more!

[@powerofdreamx]

@12:42 ...how is it missing a 10mm... Personally, I think that sets should come with two 10mms in the USA.

[@CYMRU_RoStTo]

Einhell. Love your videos my friend, always great to see. Bought the DeWalt stak based on your reviews!!! I've been slowly gathering Einhell 18v tools, firstly from wicks and then other stores started stocking, all brushless as well which is a bonus. Power and durability is there Also reference an old video it's Tooth haha Hi from sunny Cardiff!

[@JonaShone]

Hi mate, thanks for the comment! Hope you are not regretting the DeWalt purchase! Have a few Einhells but would you reccomend I check out more of them to add to my collectiom?

[@CYMRU_RoStTo]

@@JonaShone definitely not regretting DeWalt there amazing boxes very strong and the stak feature. Oh definitely... I was a big black and Decker fan but since getting my first Einhell 18v drill brushless I have been so impressed I have bought nearly all of there 18v range and never looked back and I've been using them pretty much every day to do a house renovation. There batteries and chargers are great too very quick and last ages. I was really impressed with there Multi-tool so powerful. Also if you catch wickes on an offer you buy any bare Einhell and get a free 2.5qmo battery and charger (worth 35) Going to be ordering shadow foam for my dewalts boxes on pay day for all my Einhell to go in haha Thanks for the great vids and replying!

[@three-phase562]

The DeWalt System is pretty good and like you said is a bit more cost effective, but I do prefer the Packout, for the different options that are available both from Milwaukee and third party accessories. I did look at the Makita Makpac drawers, but they just don't seem to be as well built or as robust, might be a good option for you as a comparison to these drawers though.

[@JonaShone]

Definitely one for the list! The Makita drawers are relatively new I think, so it would be interesting if they are any better than the Makpacs!

[@Danny-204]

Very nice set up, But I really struggle when people have such a mix of tool brands, I’m an electrician, I use three main brands of tools. Power tools are Milwaukee Cutters are always Knipex Everything else is Wera. I do have a few other brands i use but they are not mixed up with the rest, like my hammers are Estwing. All the odd branded tools are put away in a packout crate in my van, all neat and tidy,

[@JonaShone]

I like to give all tools a try, never know what brand may surprise you!

[@danielchavarin2686]

Shadow Foam looks great. I have Milwaukee Packout. Your black Packout boxes are cool. I have only seen the red packout in USA.

[@jayryan7473]

Be sure to check the smoothness of the ratchets before buying. I purchased the DeWalt 192 piece socket set (which thankfully was all 6 point sockets) a few years back and I noticed the quarter inch drive ratchet didn't spin very smooth. The store let me search through three other sets to find a decent ratchet but they were all pretty crappy also.

[@JonaShone]

Thanks for the tip!

[@fredjacques2979]

I don't have a collection of one brand but tend to mix and match what either is the best quality/value combined or one that I feel comfortable to use.

[@small_525]

So the algorithm sent me this video in my feed. Gave it a full look and say cool. But the reason it sent it to me is because I commented once "I don't get foam", when I saw a tool review and it came with foam. Commentors were saying "I can't wait for X?X brand to bring out more"! Yes totally organized, and maybe for a shop tool box makes sense, possibly, but honestly, all that lost space I'd rather have more tools, JIC, especially if it's a pack out. I know everyone has a story about rebuilding a trans, rear-end or something on the side of the road with a multi-tool, but I did pull the TC from a jeep Cherokee in a bone yard with my 16x8x7 Craftsman Tool box. It's heavy could have 30 pounds full of tools. The only tool not in the box was a 30" breaker bar. I bet neither of these comes close to that in terms of weight, yet look a the room they take up? Want to add a second "spanner" just toss it in, yet now you have this pretty foam thingy what are you going to do? Lay it all out again? I'm just not a fan I guess. I get it, I do, I just don't get it. If I was a mobile mechanic/ service guy, whatever outside of our plant/shop, it'll be nice to see if any tool was left some where with just a glance, and that could you save you, but pick up when your done and make sure you didn't leave that pry bar on the intake after tightening a belt... Nice video and nice looking products... I could see this for many more applications, but just not for tools...

[@JonaShone]

Great comment here and I can certainly see what you are saying! I would say it’s application as a visual way of seeing if you are missing a tool is a great use of our product, but also the time saving aspect of seeing all your tools at once, not having to search through the box, which can also help de-stress you on the worksite or job! Completely get where you are coming from though, it’s not for everyone, but for certain people, you can see why they’d rave 👍

[@martinhaynes531]

Systainer three drawer unit for me, works great with shadow foam 🙌

[@JonaShone]

We’re covering Festool very soon!

[@cerealkiller4248]

My foam order came earlier today, looking forward to sorting out my Tough System 2.0. I have a full set of Klein insulated tools, and a set of ordinary Klein multi bit drivers 11 in 1, 4 in 1 stubby and 4 in 1 precision which have proven to be questionable. Some broke ( note to self - precision drivers are not pry bars 🤣 ) some I lost and some rusted. To replace the bits was as much as a new driver ????? so I'm looking for a replacement brand, those Milwaukee drivers look nice, but I'm akso looking at Wera, Armeg and Wiha. I recently bought some Milwaukee hollow nut spinners, they are outstanding and thats why I was interested in the set you used...............

[@JonaShone]

Would love to see some pictures of your finished project!

[@niclasandersson4083]

I'm using Milwaukee Packout there are working great, tools, nuts and bolt has it place when we go to the race track. I'm planning to replace my metal tool box with Packout drawers with inserts.

[@JonaShone]

What metal toolbox do you have currently?

[@MatthiasAI]

i wonder if anyone would creat an adaptor for these. I would love to have the Dewalt Drawer on bottom with powertools and the Milwaukee on top with sockets and wrenches. I know its not do-able but i think the sizing of the draws would be perfect for my needs.

[@JonaShone]

You'd think someone would jump on this idea!

[@MotorcoachTony]

Dewalt for me! And love the Yellow & Black color scheme.

[@JonaShone]

So do I!

[@leecromer3289]

What made you decide in de Walt?

[@JonaShone]

@@leecromer3289 I just find the yellow and black convo striking 👍

[@MarkK01]

I do try and buy full sets of sockets and wrenches. I hate missing a couple sizes.

[@briangrove597]

Have both Dewalt and Milwaukee power tools, looking to buy the Packout system.

[@JonaShone]

Why?

[@briangrove597]

Why? Just looking for some organization, and like all the extra accessories for packout.

[@ellislawrence8940]

my mate used to do this with polystyrene for his socket set and used to heat up the socket and melt it into the polystyrene to keep it orginised

[@GrahamGphotoParker]

Have you cut any foam for the 3 drawer version ? and do you have the precept ones in stock for the 3 drawer ?

[@TokyoCraftsman]

Great video. The Packout boxes are more than double the price of the DeWalt boxes here in Tokyo, so I buy DeWalt. Cheers from Tokyo!

[@hachi-rokuperformancegroup3987]

And packout drawers and all the other brands offer no protection from weather. Dewalt drawers are ip65 so rain isn't an issue and a solid win for me

[@angelomotta4144]

Sempre ottime soluzioni, un artista

[@JonaShone]

sei troppo gentile amico

[@seriouslycreepy666]

That clip from the burbs was great my fav film 😂😂😂

[@JonaShone]

Only person to get that reference, top film isn’t it?

[@cameronb1907]

Count it 2. So many great quotes from that movie. 😂

[@TradingFeline]

So glad I came across this channel.

[@JonaShone]

Thanks Kenneth, welcome to the channel! What would you like to see us cover?

[@jeffrellek2792]

Awesome video!

[@hachi-rokuperformancegroup3987]

The fact that dewalt drawers are ip65 rated is an automatic win for me and why i went that route even though i been in their system for almost 10 years now

[@richardgriffiths2019]

Packout has changed the way I work 😊

[@JonaShone]

How so? 😀

[@garryritson7712]

No always been macpac as it holds all my makita kit. But would love to convert over packout. Just the cost. As im all in now with makita.

[@JonaShone]

Have you seen our recent Makpac video?

[@Iam_jardow]

Excited for tough built

[@JonaShone]

Should we do a Shadow Foam video in touch built?

[@projectrebuild908]

Both look great.

[@JonaShone]

Haha pick a side!

[@projectrebuild908]

@ShadowFoam sorry I'm not in either platform. So Ryobi for the win. Just nothing to compete in this category with.

[@ianbishop934]

Could u possibly do a stanley fatmax set up love the videos mate

[@racecarchar]

How about a 3 pack for the three drawer TS2.0. Do you sell singles?

[@JonaShone]

we only sell twin packs at the moment, but that way you get a spare for practising on!

[@RemedyDoesGaming]

What about the DeWalt 3 drawer?

[@JonaShone]

We did mention that in the video 👍

[@RemedyDoesGaming]

@@JonaShone Yeah... Sorry about that, I jumped the gun on commenting and then forgot to edit it.

[@clearlyconfused9194]

In the uk the 3 drawer packout is approx £160 vs the dewalt 3 drawer at £105. That was my reason for going dewalt. They're quite a bit cheaper.

[@JordanTait95]

Hi, I’m a relatively new subscriber and love the clean look the foam has where is the best place to buy ? I was looking on a shadow foam website but I can only buy in multipacks that don’t actually suit the number of sheets I need and ends up costing more money for some foam I don’t even need is there a solution without spending a fortune ?🤔🤞

[@JonaShone]

Hi Jordan, what are you looking for specifically?

[@JordanTait95]

@@JonaShone I was looking for the 600mm x 400mm (preferably 70mm deep but I see you don’t do this) 50mm deep but 7 sheets 👎🤷‍♂️

[@JonaShone]

@@JordanTait95 have you looked on our custom sizes page on our website?

[@JordanTait95]

@@JonaShone yeah bud there coming in at 38.99 per sheet which personally I just feels a bit to dear 🤷‍♂️👎 sorry sounds like I’m just being negative not trying to be!

[@garryritson7712]

The packout system is the best out there and much more well thought out. Makita is flimsy case.s, and i have broken a cpuple over the years. Dewalt tough case are pritty good too as i have one or two to house my burn kit for soldering. But pack out system ❤

[@JonaShone]

Have you always had the packout system?

[@gavinkinsman8921]

11mm spanner needed for m6 roofing holt (square nut) electrician very used size spanner. Thought you maybe interested. 😊

[@JonaShone]

Very interested! Thanks for letting me know!

[@hachi-rokuperformancegroup3987]

Jeeps it's a common size

[@jiripodzimek7319]

nice video, will you make foams for Poland system Qbrick ? nice and budget drawer

[@JonaShone]

Is that available in the UK?

[@piprin]

Packout system is far superior, like you say, though there is a big price difference between the too, the new toughbuilt looks like it could be a good alternative, though

[@JonaShone]

Definitely keeping my eye on the toughbuilt!

[@DRINOMAN]

dewalt handles auto lock is clutch and it’s deeper so you can fit drills and other power tools…

[@JonaShone]

Great thought that! 👍

[@chrisfont77]

If ordered do you make it all the cut outs?

[@JonaShone]

We don’t, it’s a DIY product as no two tool sets are the same!

[@Ferbeldeyberb]

I like how you put that stubby screwdriver at an angle for the OCD madafackas! 🤣

[@kevinbell4626]

Packout for me mate 👍🏻

[@JonaShone]

How come?

[@Jock-mj4zd]

12:06. Alright who’s the It’s Always Sunny fan? You or your editor?

[@neilclark3243]

I've owned every major brand from Ryobi, rigid, DeWalt, Makita, Milwaukee, to Hilti. And price per preference Milwaukee wins hands down.

[@JonaShone]

What’s been the worst?

[@toxicmatter22]

@@JonaShonewish he answered I kinda wanna know

[@JonaShone]

@@toxicmatter22 same here! What do you think is the worst?

[@HannahMehdi]

Great video, thank you. A line dropped :) and subscribed

[@64gorrilla]

I’m a dewalt man of over 35years but like the best tool for the job so own other brands have t stack and toughsystem 1 and 2.0 but most likely swap to toughbuilt when available not used shadow foam yet as can’t decide what to put in the boxes as too many tools 🤔

[@JonaShone]

Have you seen our just posted DeWalt video?

[@64gorrilla]

Yes but have you tried foam inserts in rheumatoid arthritis dewalt and Milwaukee rolling tool chests yet they look like a lot of tools can fit in saving loads of boxes

[@64gorrilla]

The problem for me is too many boxes maybe a shadow foam van vault setup? Using dewalt trays😂😂

[@64gorrilla]

Where rheumatoid arthritis come from i dont know predictive text 😂😂😂😂😂

[@steven7650]

You didn't mention that dewalt is water resistant. Milwaukee is not. Left a milwaukee box out in light rain, drawers were filled. Sold them went dewalt only.

[@hachi-rokuperformancegroup3987]

I thought about changing to ridgid but like packout not weather protection for drawers so i decided to stick with toughsystem and bought drawers on sale and dont regret it

[@ArmoredXJ]

Did you do the dewalt 3 drawer?

[@JonaShone]

Not yet, but we will! 👍

[@leebergin7130]

Peli 0450 🤣 because I'm a glutton for financial punishment. But I've foamed the cantilever Stanley fatmax with a double deep layer of foam in the bottom for a nice cheap 3 level box with all your tools visible at the same time.

[@JonaShone]

Would love to see that if you’ve got any pictures?

[@leebergin7130]

Pictures? I've fully itemised tool lists with pictures attached because I'm sad aviation tool'a'sexual 🤣

[@joenguyenle7018]

Do you ship your foam cutting tool to the US?

[@JonaShone]

We do indeed, all shipping options available on www.shadowfoam.com

[@Jock-mj4zd]

12:06 okay who’s the It’s Always Sunny fan, you or your editor?

[@JonaShone]

My editor - he assures me it's a great show! 😅

[@levilynde8220]

I buy the Tstak system because of how much cheaper it is. It's drawers are also top notch

[@JonaShone]

Can't beat a full extension drawer system!

[@surfearth1]

Why are the Euro versions black, not red like in the US.

[@JonaShone]

Couldn’t say, maybe to tell them apart?

[@ChrisTeamOnyx]

A volt stick without insulated screwdrivers ?

[@JonaShone]

Recommend any?

[@NorthEasttruckspotting1]

Can you do Dewalt TSTAK vs makita matpak

[@JonaShone]

It’s on the list! 👍

[@fatboyjim6100]

Dewalt for me and already sorted with Shadow Foam 😊

[@JonaShone]

Have you got any pictures of your finished build?

[@GmoneyX112]

I like Dewalt there is more to choose from and never had issues

[@JonaShone]

Great point! What does your DeWalt setup look like?

[@Fish6699]

DEWALT Battery Ecosystem. A mix of Tough System T-Stack, 2.0 and Cases.

[@JonaShone]

Good choice mate 👍

[@jmackinjersey1]

I do however like the new modular system that Toughbuilt came out with.

[@JonaShone]

I’ll check that out for sure!

[@jmackinjersey1]

@@JonaShone I'm sure they'll be a premium price since all of their other products are priced a bit on the higher side of the spectrum by comparison.

[@NicleT]

Even if the Milwaukee have that metal rods blocking the drawers, the lock hole on top is plastic only. Why? Why didn't they put metal rings in it? A simple cutter and bye-bye security.

[@Robert-ug5hx]

I like Milwaukee packout, there easy to get and unlike dewalt you can gett in lower cases.

[@JonaShone]

Good reasoning mate!

[@MrJetwpn]

Still waiting for you to do a Snap On toolbox!!

[@JonaShone]

Working on getting my hands on a specific one!

[@jmackinjersey1]

I agree that the DeWalt hand tools are a bit on the useless side. The thing about DeWalt hand tools is they are simply rebranded Stanley hand tools and nothing more. Yes, I know, I know. Stanley hand tools used to be decent tools. But once they started making them in China, their quality tanked. So, SBD decided to stamp DeWalt on them and raise the price just a bit more. Although, those wrench sizes are quite common here in the States.

[@JonaShone]

I had a feeling that was the case!

[@stepbackandthink]

This simply isn't true. I've owned both Dewalt and Stanley tools simultaneously. They are similar but not the same.

[@hachi-rokuperformancegroup3987]

Milwaukie hand tools are also junk and made in China. I'd rather buy dewalt for most things than Milwaukie, but many better brands I'd buy before either brands hand tools

[@rickybolton5822]

Will do thank

[@MarkK01]

I cut some of the Milwaukee foam that comes with their top boxes and that was a nightmare. We have another brand here in Canada that starts with a K. That is the brand I am going with next. I can not afford to buy shadow foam and have it shipped to Canada. That way is way to expensive. If I could get shadow foam at the same price as the K brand here in Canada I would love to give it a go, but that is not possible so sorry shadow foam.

[@phillewis1768]

Big red all the way!!!

[@JonaShone]

All the way indeed! 👌

[@fixedit8689]

Foam inserts don’t work for me. I’m a millwright and pack lots of tools to the work area plus there are lots of emergencies so as long as wrenches end up in the wrench drawer, screwdrivers in the screwdriver drawer, I’m good

[@JonaShone]

That's fair enough!

[@andrewramirez6332]

I think Milwaukee wins with me. It’s a little more hefty and has the aluminum corners to protect from impact. With dewalt you have a big chance of snapping the lever off when you open and close the drawer. Milwaukee is superior to that because they have the locking bar a very simple but strong way of holding the drawer shut during transportation. Only drawback with Milwaukee is that you sacrifice drawer space so those longer tools will not fit

[@JonaShone]

Great points made here, do you have milwaukee?

[@andrewramirez6332]

@@JonaShone yes I do I have the roll tool box and the 4 drawer and the 3 drawer for my tools owned it for about 2 years now.

[@X10-FX]

DeWalt works best for me. Love watching the toolbox organising videos.

[@JonaShone]

Thanks mate, have you subscribed? We do one every single Friday!

[@X10-FX]

@@JonaShone Yes I have subscribed. Look forward to the next one. Keep up the good work.

[@masongale2908]

Milwaukee it just feels better in the hand I used to have a DeWALT drill and it was horrible in the hand so Milwaukee wins hands down

[@JonaShone]

Have you tried any of their other tools?

[@william132]

These are great and all, but for me, since I am from canada the price for shipping alone is almost as much as the product itself so it isn't really worth it to me

[@JonaShone]

We are working on Canadian distribution! 👍

[@william132]

That's great, when that happens I'll for sure be ordering but until then I'll hold off due to the price of shipping

[@jdmillan8398]

DeWalt but I wish they had more stuff

[@JonaShone]

What would you like them to have?

[@JEAN-me1yt]

Salut Shadow Foam, excellent vidéo, je préfère Milwaukee, bonne continuation à plus JEAN.

[@JonaShone]

Qu'est-ce qui te fait dire ces mots Jean ?

[@stevebourke1636]

Milwaukee. Red and Black all the way.

[@JonaShone]

Any reason why?

[@charlesingram9471]

well both of these have been left gathering dust because milwalkee just refuse to update theirs and are still using the exact same design as the originals and they just arent as robust as some other brands, Dewalt have updated their Tstak system to 2.0 but that still leaves a lot to be desired, other brands like Klein and Toughbuilt, even Flex are all better than these options and im sure the new makita ones coming very soon will be better too. The only thing going for milwalkee is their extensive range of accessories, which nobody should be buying toolboxes just for their accessory range. I have bought Many boxes, bags and systems over the years and they all fall to bits in a few months. Finally now we are starting to get more heavy duty options, with the functionallity of the likes of milwalkee. I wuld honestly go with milwalkee if it wasnt for them being made from inferior plastics and so flimsy. They work fine for diyers or if they stay in a workshop, but drag them round sites for a few months and they can go in the skip. One big thing to watch for is all these brands are now going the drawer route for easier access, but the drawers dont last long because most of the drawer runners and/or plastic just arent strong enough.

[@robertsoneil83]

I've owned all different brands of tools over the years but most of my main tools are dewalt

[@JonaShone]

How come?

[@robertsoneil83]

@ShadowFoam I think dewalt was the first good tool brand I used. I'm talking like 25 years ago and I just stuck with them. I've heard lots of good about Milwaukee but never used one. Once you invest into a brand it cost alot to change over. Changing batteries and things.

[@nationwideofficial7201]

I love All tools 🎉🎉

[@JonaShone]

What are your favourite tools?

[@nationwideofficial7201]

Bro both are good butt I like Milwaukee tools ❤

[@rickysandoval2166]

Dewalt

[@Tom_Prendiville]

Milwaukee Full Disclosure......makita tools in Milwaukee packout 🤫

[@JonaShone]

Ooo that’s controversial 🤫

[@rickybolton5822]

I need a drill what the best one to get for ever day jobs around the house

[@JonaShone]

Whichever one suits your budget! Check out my latest video for some buying tips!

[@masongale2908]

Bosch and Milwaukee

[@JonaShone]

How come?

[@Danshaker-yp2eg]

Dewalt - no doubt

[@elliotstoolsandprojects]

Milwaukee for Me 🛑

[@JonaShone]

Always had Milwaukee?

[@elliotstoolsandprojects]

Yeah Won a set of power tools and gone from there hopefully get a pack out one day. This video was a good help too show what you can fit in the 4 draw.

[@mattbarker581]

Milwaukee for power tools and Halfords Advanced for hand tools

[@JonaShone]

Have you seen our Halfords video?

[@mattbarker581]

@@JonaShone I certainly have and loved it! The Halfords video was enough to persuade me to buy the 2 piece foam insert for the H/A tool box. My Advanced 100 piece socket set, Advanced 16 piece ratchet spanners and a few other H/A bits all fit in nicely ( all the H/A tools are in 1 box now as a pose to 3 different boxes/ trays) A few more tools need organising, so I'm tempted to buy another H/A tool box and the foam inserts and do another layout for the last of the hand tools. Shadow foam had transformed my messy/ cluttered workshop into a more organised one

[@Janhartman74]

Just switched from Bosch to DeWalt.

[@JonaShone]

Any reason why?

[@Janhartman74]

Yes. My angle grinder stopped working and gave a shortcut in my house. I’ve had the grinder for about 8 months but Bosch didn’t give me any warranty. So I decided to replace my power tools to a different brand when they need to be replaced. Ended up choosing between Milwaukee and DeWalt and choose DeWalt because of a more affordable price since I’m not a professional.

[@monkeysausageclub]

The DeWalt just has a much smaller foot print than the Milwaukee. And foot print is a very big deal if you have to load a van up.

[@JonaShone]

Very very interesting point!

[@mikeenglish1492]

Milwaukee, hands down

[@JonaShone]

Do you have any Milwaukee?

[@magniziskajacobsen7236]

Milwaukee all day

[@JonaShone]

Got any packouts?

[@garryritson7712]

I use Makita, but would much rather Milwaukee

[@JonaShone]

Why?

[@agkwoodworks3136]

For me it has to be Bosch

[@JonaShone]

Which Bosch box?

[@dannywilliams7704]

Stanley fatmax v20 and Milwaukee m12

[@JonaShone]

Great choice! Why did you choose those?

[@dannywilliams7704]

@@JonaShone the Stanley for affordability as I'm just a DIYer at home and the M12 because I do most of my own work omy car and again affordability amd reliable and a great product

[@richardbrookes5241]

Snap-on 😎

[@JonaShone]

We'll be covering Snap On soon, watch this space!

[@johncollinson6355]

Dewalt here

[@JonaShone]

How come?

[@johncollinson6355]

@@JonaShone it all started with a friend getting a Dewalt drill and impact set, it looked a good setup and it was all I needed to start my collection of Dewalt tools and tool boxes. And now I have watched a few of your videos it’s time to get the foam and do my own boxes. Cracking videos.

[@TomDawson18]

i use DeWalt for DIY purpose at home and as i am a mechanic on cars i use a miss match of tools impact and impact driver is mainly Kielder and the rest of the stuff is sealey draper and lazer tools

[@JonaShone]

Nice combination! What do you use to store all that?

[@TomDawson18]

@ShadowFoam The DeWalt stuff is in just a standard blow moulded box that is only a drill and impact driver, and the other tools are in a clark HD tool box/ cheast but that is going to be changed shortly as I'm look to put in a van and go mobile

[@mtabsw]

In america it is just as silly not to have 19 mm or 10mm. heck just for my trucki have a ford and you cant touch it without 8,10 and 19

[@JonaShone]

Didn't know that! Thanks for filling us in!

[@DieTube-l4e]

Definitly Milwaukee

[@JonaShone]

Have you got Packout?