Diagnosing And Fixing A Whirlpool/Maytag Washer That Is Not Turning On!

[@fringeminority5676]

Like your vids. Pro tip for you, when checking ac voltage use your LoZ setting. You won't be tricked by ghost voltage. Only the CL700 and CL800 have that option on klein meters

[@DuctTapeMechanic]

Great tip! Thank you!

[@KirkandRA]

Thank you for the video. I really didn’t want to take apart my whirlpool washer so I unplugged it overnight and it reset itself. It’s done this before after a power outage but this time it just stopped working. If it does it again I may have to look into other problems. Thank you again

[@DuctTapeMechanic]

You're welcome! Hope it behaves!

[@ricardoarturocastillo6495]

Easy access to opening top panel by using a flat durable putty blade on each end of front panel edge.

[@DuctTapeMechanic]

Yes! I am so used to opening it up this way from having changed so many lid lock mechanisms and suspension rods! Lol

[@lancecourtney6737]

My washer is stuck in the drain mode and none of the lights are working. I have unplugged it several times and have done the reset 2-3 times. Can you help me?

[@Twerp70]

Should the power cord be plugged in when checking the first power connector you checked?

[@KcufThePopulati0n]

You serious?

[@stephanieebates1202]

Very helpful

[@ItsMeLalaBoo]

I have watched every video available,! I need help! Please Nothing is working

[@TimMowers]

So my output voltage in only about 4 DC volts. I AMYs that means my control board is faulty. You did not shore this the fix, just the diagnostic.

[@DuctTapeMechanic]

If you have 4 volts dc output of the main board, that means your board js bad and should be replaced!