DiaLux evo - How to use LED strip

[@gamalhassan2769]

thank expert lighting design nelca for your clear explanation and accent . ihope god help you and increase your knowledge

[@adelzada8064]

Thank you, madam, for these lectures

[@lolcadena3462]

Dear nelco, did you create the plan on dialux itself or you import this from revit or else where, ple

[@formationindustriel7372]

Thanks nelca you are amazing

[@tatumuandaengineeringservi4468]

Hey Nelca! How are you today? How do you design lightning on a Lapa? Something that interacts between indoor and outdoor seen?

[@maansalas202]

Hi Ms. Nelca i really love ur presentation. :) keep it up! :) im just only starting self-studying to learn about the Lighting design..and I believe i can learn a lot from you. Thanks! Godspeed.

[@NelcaRoco]

Thank u, Maan. Keep practicing!

[@larazhang2555]

Dear Nelca, Thank a lot for your tutorial. May I know how to calculate the auditorium lighting design?

[@Godardito]

Super videos! Thanks!

[@atikahnurulfajribaharuddin325]

hello nelca, how to make sure that the light is according to standar?

[@NelcaRoco]

check the calculation report and check the standard if the same. www.zumtobel.com/PDB/teaser/EN/lichthandbuch.pdf

[@nith49]

hello how to add double door

[@seanphilip3425]

hello Nelca,,in your exporting/ importing of models in dialux ,,is that as one model? or per furnitures..?

[@Fotonicastudios]

Hi, good job. I have some questions...first one: which is your criteria to distribute the lights in the room? Do you work before with the cavity method to calculate number of lights, type of lamps and the distribution... or you plan the lighting based on a fashion/design way ? Thanks

[@NelcaRoco]

If it is more of architectural lighting, I do it by light scene or mood. If it is technical lighting, then I do it by lux level and uniformity.

[@Fotonicastudios]

Lux level at work plane its accurate way to measure light? i read in some web that its only referential, but im not sure.

[@chrisjoseph2861]

hey nelco , i would like to know , how can we understand bulding heights and width (i am new to dialux software , so could you please make an video regarding it

[@mera1585]

Hi Nelca, I need help as soon as possible please, I want to make a design for a clothes shop, and I don't know how to make the interior decorative for it. ?From where can I get the models and suitable furniture

[@NelcaRoco]

go to archive3d.net/

[@mera1585]

thank you

[@BSA_Lighting_Design]

so insightfull💥

[@cherinetalge3615]

Hi Nelca i love your videos, but i have a question according to led flex, i have dialux evo 6.2, when i draw a curving reference line and press "end" it doesn't give me the option copy and arrange that you have so nothing happens when i close the line, how to solve it? Thank you

[@mywiful]

Dear Nelca Greetings. As always your tutorials are excellent and very helpful. I am facing a problem related to Light selection catalogue. I have to design lights for a small pharma setup involvinng normal n clean room lights. I tried to get catalogue from Havells and Wipro in India but they r not available on net or there website. also they r not available in Dialux catalogue. I inquired there distributor but they didn't provide me saying it's not shared. please suggest how can I get this files or If I can create them by whatever data available like wattage, luminance, temperature, dimensions. plz suggest I need this very urgently.

[@frednaceno201]

nice video very helpful

[@birdlady312]

hi nelca, i cannot seem to add lights to the curving reference light. only reference line appears.non light is seen

[@runbou3485]

Thanks អរគុណ👏

[@steffyjames9294]

Hi Nelca Can you show how to use a multicolored led strip? how and from where can it be controlled?

[@NelcaRoco]

Hi Steffy, just use the color filter under la,p tab, then create light scenes. If you cant find it, i will create a video for you.

[@steffyjames9294]

@@NelcaRoco thanks a alot. I will try this out and get back to you if a video is required😃

[@vanderlineisilva6662]

Nelca very good, excellent presentation. A question. It is possible to import other vegetables files?

[@NelcaRoco]

Dear Vanderli, What do u mean by vegetables files? Im not familiar with this.

[@begonasanchezoviedo3926]

Hi! I love your tutorials, you are great! I would like to know if I can create sections in Dialux to render it. Thank you!

[@NelcaRoco]

Thanks Begona, you can create views and raytrace it. See this video if it is what you mean. kzbin.info/www/bejne/hH3Wg2Sjmrx3lZI

[@faizakhan1781]

Hey Nelca Mam, Icannot download window facade louvers from HELLA brand or any other in dialux evo .. kindly tell me other solution thanks ...

[@Rocco_cin]

Fantastic tutorial Nelca! Can I send my work for university?

[@NelcaRoco]

+Rocco Cingolani Dear Rocco, If this is for educational, I will help you, but if it is your work, then no. I am connected to a lighting company right now. It will be unethical for me. Hope you understand.

[@Rocco_cin]

+Nelca Roco You have an email! For thesis in mechanical engineering! In most plans they are offset if you look at dwg! Please see dwg and my work in dialux! My problem is roof and plans they are offset!

[@alessandrof.fratti4566]

Hi Nelca, I have to know how to use realistic trees and plants without making the file too heavy for the calculation, thx:)

[@NelcaRoco]

check this out. kzbin.info/www/bejne/Z5zFqqSAq8Z6pqc

[@gseyda220]

hello Nelca, really good work appreciate it, did you make this building on dialux evo or 3d max? Also i know many things about the dialux evo especially lightining parts but i am really bad at making or designing those kind of good buildings what would you suggest to me for ? (i am electrical engineer thats why i am bad at designing :(

[@NelcaRoco]

+Gazali SEYDA Dear Gazali, thank you for your message. You just answer your question. Hehehe! You are Electrical Engineer! Most of engineers are left brainer, meaning yo tend to be good in numbers and analytic, we architects tend to be good in arts, in design. But, don't worry I know some engineers who excel also in design, they just keep on practicing. So, my suggestion is, keep on practicing and keep looking for inspiration buildings, like whatever beautiful buildings around you or keep googling good architectural design and imagine how you will light it. I how you will keep on practicing! enjoy! regards, nelca-

[@NelcaRoco]

+Gazali SEYDA These are pure Dialux evo, no 3D Max. But, i took some 3ds files, like the chairs from archive3d.net/

[@gabrielanique6493]

Thank you¡ from perú

[@NelcaRoco]

Thank you too, Gabriela!

[@Mdhunk2008]

whenever i tried to place the light around curves, it doesn't fit there either it fix to ground or it stay in air in the room but couldn't fit it in curve area !!! am i doing something wrong or selecting wrong lights ??

[@NelcaRoco]

Check this. kzbin.info/www/bejne/mn3CnWRvfL19g6c

[@eugenweber2660]

Hi Nelca , habe einige fragen zu decken abhöngen. Wie kann ich in einen raum Decke schräg einziehen?? kannst du mir bitte helfen ??? DANKE

[@NelcaRoco]

Hallo Eugen, Sie können eine Decke zu erstellen, oder Sie können die Decken-Typ in dialux evo. Die andere Option ist, verwenden Sie die "cut" -Option, um die gewünschte Form der Decke zu bekommen. Lassen Sie mich wissen, wenn Sie es geschafft haben.

[@darcypech5465]

Hello I sent an email I was watching this video because the lights look warm I want to know what catalogue it's good for get lights around 2200k to 2700 k and high lm I was looking for them but the catalogues no show the kelvins... Thanks....

[@NelcaRoco]

Check it fro here: www.tridonic.com/com/en/products/talexxmodule-lle-g4-24mm-1250lm-adv.asp#tab8 enjoy!

[@darcypech5465]

Hello I didn't explain good sorry, I want it is warm lights around 2200k to 3000k but I couldn't get because there are few, do you know what plugin have warm light I need of different types of recessed, buttres etc. again thank you so much.

[@thajmulhussain4113]

hi! i was download the catalog after does not appear why. even though i could not able to drag the lighting fixture.could you solve that problem

[@NelcaRoco]

watch the video again and check the IES file that you inserted if it is ok. sometimes photometric files from not so reputable lighting companies has errors.

[@marocat9123]

can you show clearly how to make the glass transparent and what is the material you use .please.

[@NelcaRoco]

Dear Marco, Check this one, if it is still not clear, let me know. kzbin.info/www/bejne/fmjCfoCEqZKNl8k

[@marocat9123]

+Nelca Roco, Lighting Design it is very helpful many thanks 😊

[@SonamYuden-y4u]

Hi .... I couldn't download and use the catalogue file in relux, Please help me

[@vanderlineisilva6662]

Nelca Congratulations by all videos. I like to know how to calculate UGR in DIALUX EVO 6.

[@NelcaRoco]

Ok. I will create a separate tutorial for that.

[@vanderlineisilva6662]

I am very happy with your answer. I'll wait. Thank you very much

[@eugenweber2660]

hallo Nelca, könntest du mir helfen einen Sternenhimmel zu machen?? oder wie kann man sowas realisieren. Bitte um Hilfe. Danke :-)

[@NelcaRoco]

Hallo Danke, es ist nicht möglich, starry Himmel in Dialux zu haben, aber du kannst es mit Photoshop bearbeiten.

[@eugenweber2660]

Nelca Roco, Lighting Design Ich arbeite leider nicht mit Photoshop 😯 wie kann ich das dann machen? Gibt es da keine fertige Module die man da einfügen kann?

[@MUsmanAli05]

Hi Nelca .. Is it possible , if your could share some of your project ( which ever you want ) dialux files with us .. ?

[@NelcaRoco]

+Zarbe Haider Dear Zaber, Sure. Please give me your e-mail address and I will send it to you. Keep watching my KZbin videos!

[@MUsmanAli05]

+Nelca Roco ohh , thank you you can share with me [e-mail] tx

[@MUsmanAli05]

+Nelca Roco Any further action on sharing :) [e-mail] [e-mail]

[@NelcaRoco]

sure, let me look for it in my files coz its just a sample design. Most of the time I deleted these projects after the video tutorials.

[@zahraamahmood5617]

I love you 😍 ❤

[@peertjeprojecten9902]

thank you!

[@NgocNguyen-bn9ew]

Hi Nelca, Could you please show me how to calculate lighting in dialux evo with border lighting smaller than room border? In dialux I can propose luminaire , draw new calculation surface that I want and set wall zone (work zone), but I don't know how to do it in dialux evo. Thank you first :-)

[@NelcaRoco]

Hi Nguyen, check this out. Run the video to 5:20. kzbin.info/www/bejne/qHvNnJ-Ffrqmeqc enjoy learning!

[@TheEldoritos]

Inspirational

[@DenzGeoChannel]

My job application brought me here..I don't have any idea about this software. I need to study here.

[@sesuml3235]

Can you send dwg file

[@idiotnaing6618]

Thanks....

[@shannanschisler9577]

I'm really sure you can build it yourself. I did this 2 weeks ago thanks to the Woodglut plans.

[@frednaceno201]

Hi Mam

[@NelcaRoco]

hello

[@frednaceno201]

I saw your excellent video Mam! Sa ngayon beginner po ako sana marami pa kayong ipalabas na video.

[@NelcaRoco]

Yes, no worries, madami pa. while waiting look for other video tutorials from other channel so u will have other ideas.

[@NelcaRoco]

btw, ur profile pic is sooo cute!

[@ahmedadly1945]

Thank you, madam, for these lectures