I’ve spread the bag of sand on my driveway to dry it out and then sift it through window screen over a 5 gallon bucket. Figuring out a way to fasten the pickup tube to the bottom of the bucket for a gravity feed would probably help a lot. And at that point, you would want to hang the bucket from a heavy tree branch or an overhead beam. Thanks for the great video and your emphasis on eye protection.
@boots7859 Жыл бұрын
Yep, thats what my dad did when we would get sand from our lake cottage. Get a 5-10g bucket with top, and put a fitting on the bottom for your media hose. Put it on or hang from a 6' ladder.
@mikedevries3472 ай бұрын
Keep the sand feed tube on top of the spray nozzle to prevent water from backflowing into the sand feed tube.
@KevinNguyen-zn4vv2 жыл бұрын
My brand new electric power washer @ 2050 PSI 1.8 GPM kept clogging up and did not produce any vacuum. Plan A: gas powered washer with 3500 psi and higher flow rate. Plan B: pressure and gravity fed using an automatic tire inflator to keep the PSI of the garden sprayer at ~30-40psi. A&B: a larger nozzle to increase flow and reduce back pressure (I believe that is the root of the problem).
@NerdyMeathead2 жыл бұрын
did you try the tire inflator? I heard also to use pool filter sand
@boots7859 Жыл бұрын
That electric is just to puny both in PSI and GPM. I had a similar one, and while it was great for washing the car and PW duty, the gas one is like 3500psi and 3+GPM. You can usually get a decent one cheap in the fall or winter.
@angelotillas9782 Жыл бұрын
Rucker made two good points, keep the sand feeder tube vertical, and as June Fletcher mentioned, duct tape it on the top of the wand to minimize blockage.
@michaelmonceaux21072 жыл бұрын
I put the sand feet tube from the top it helps alot from getting water in the sand feed tube. I also used window screen to sift the sand in a bucket to separate the rocks
@vernonpeterson4021 Жыл бұрын
Since it's difficult for water to run uphill, try raising the bag off the ground. Maybe set the bag in a wheelbarrow.
@boots7859 Жыл бұрын
LOL, I know right?
@vernonpeterson4021 Жыл бұрын
@@boots7859 Me? Always learning. Years ago, I used to wash my concrete panels with a brush and water. Then this young "punk" said "Why don't you get yourself a power washer? I felt like a complete idiot. I bought one and retired the brush! I'd only been building for 29 years. Uff Da!
@obfuscated309012 күн бұрын
An often great place to hire out sandblasting is one or more of your local monument shops. That's where I've had truck frames blasted (I trailered mine in and left the trailer with them as a convenient work surface) so cheap although I just bought an industrial blaster I'll still take large projects to them to avoid the grit bath.
@markrainford12192 жыл бұрын
I imagine that the first four square inches are great fun.
@cecilsabourin9462 Жыл бұрын
Loved your idea of using an air compressor to blow out a blockage , verttical tube plasment and taping the sand line, as well. A guy could also tape over the bucket top with a plastic covering to discourage sand wetting and clogging. My powerwasher is 3000 psi ,so I,m looking forward to getting to my truck .thanks guy .
@philburdette51653 ай бұрын
I know this is an old video but white silica sand is basically quartz sand that is mined. The all purpose sand would have larger material mixed in. Might have better results with a graded silica sand. Would also depend on whats easiest to access where youre at. Running your all purpose sand through a screen is also a good idea like others said. Good video though, definitely looking into it for my projects.
@rloden19672 жыл бұрын
Imagine shooting a shotgun at close range to a painted surface using various shot media. The first shell was filled with rubber shot. The second shell was filled with aluminum shot. The third was filled with steel shot. So, playground sand will help clean, but it will take a lot of it (rubber shot). The aluminum shot is better, but it is still relatively soft (silica sand). By the way, when you think of silica dust, think of asbestos. Asbestosis, and Silicosis are similar in the fact that both cause scar tissue inside the lungs that can't be undone. Silica sand is not the only hazard here; grinding, cutting, or chipping concrete, masonry, brick, or cinder block can create harmful dusts. Now to the steel shot - coal slag is the most economical hard shot media. The mineral itself is dirt cheap; but there are costs associated with it to verify its silica content (usually less than 1%), then bag it, then ship it across the states. Black Be..., I mean coal slag is not cheap, but neither is it (usually) worth recycling. Abrasives by Hardness (MOHS) Plastic 3.0 - 4.0 Walnut 3.0 - 4.0 Glass Bead 5.5 - 6.0 Silica Sand 5 - 6 Crushed Glass 5.5 - 7 Coal Slag 6.0 - 7.5 Olivine 6.5 - 7.5 Staurolite 7.0 - 7.5 Garnet 7.0 - 7.5
@fordwheeler2 жыл бұрын
You can get Coal Slag in 50 pound bags for 10 bucks at Tractor Supply. That is the only place I have seen it that cheap. This is great information in this post. Hope this helps others as well.
@andrewdonohue18532 жыл бұрын
@@fordwheeler i have had some problems with tractor supply material having tiny piece of wire which clogs the gun.
@boots7859 Жыл бұрын
Not sure if I got suckered, however a welding supply place had metal shot for $50/50#. Got it in my TS blasting cabinet and it seemed to work fine last year. Gotta go out and see if it all rusted together or is still reuseable.
@andrewdonohue18532 жыл бұрын
i have a unit that i put together myself. it's a harbor freight predator engine 212 CC and a 3,300 PSI 3 GPM triplex pump on a used pressure washer frame. it's decently strong. i think i may try this
@Verb1303 жыл бұрын
Nice demo. Editing could have cut out about 5 minutes of time and still had great content. Keep up the good work.
@wesleyserpone2097 Жыл бұрын
I honestly don't think that sandblasting that panel would ever get hot enough to warp that metal but stranger things have happened.
@michaelmorris4902 Жыл бұрын
It definitely would. I sand blast equipment for a living
@terrorofdemons11688 күн бұрын
It will I have done it myself
@MWBgq Жыл бұрын
I know it's called SANDblasting, but you're not meant to use literal sand. That's why you had such a struggle. Proper blasting media comes in grades (similar to sandpaper grits) and different materials (steel, glass, plastic, ceramic to name a few). You'll have better, more consistent results and an overall more positive experience if you use the correct materials.
@brentholla8222 Жыл бұрын
🤦♂️ Sandblasting media can be literal sand. Many people have no problem using play sand with this method. Would sandblasting rated media work better at not clogging the siphon? No doubt. Will play sand still work and at a significantly reduced cost? Absolutely. 🤷♂️
@davidgaudette1549 Жыл бұрын
I have seen other videos with great results from play sand but it has to be dry and it helps to have a second man manning the sand feed. If I can't get a salvage frame in 2 weeks I will be trying this method on a frame and will post.
@boots7859 Жыл бұрын
BS. People have been using play sand, beach sand, any kind of sand for decades and decades. Depending upon whether you're a professional sander needed better results, or reuseable media, yes better media is available. It is certainly not necessary to spend on it for everyday Joe to clean up some panels or parts. Just use a real mask if using silica/generic sand as Silicosis is real and 1 good sanding interval can cause a lot of permanent damage.
@donaldday9776 Жыл бұрын
The all purpose has bigger pieces in it. The medium grade sand works alot better
@talltom11297 ай бұрын
You obviously have no idea what you're talking about. For the rest of you, I buy play sand from home depot, been sandblasting glass for 2 decades. Play sand is the same price as all purpose, but is a consistent fine grit.
@garyjohnson8012 жыл бұрын
If you screen the sand first you wouldn't have a problem with it going through the tube. And I know that for a fact because that's what I did and I didn't have anymore problems with the sand coming out the end
@phillipowens1493 Жыл бұрын
Since you know rocks and tiny dibriey wii clog the unit why not be more selective in the type of sand used, a cleaner variety might be playsand which has laready been screeded for small stones and debries. Also a more secure container for the sand with disbursement from the bottom would be more effective and less problamatic!
@codycason63732 жыл бұрын
Try a Rubbermaid tote with a hole in the lid for the sand!
@larrylong626811 ай бұрын
Elevate the sand as much as possible, water back feeding will be less problematic.
@troyrhoads2653 Жыл бұрын
wonder what would happen if you already had a small sand blaster from HF and just suppy air to sand tank while having pressure washer hooked up to apparatus
@boots7859 Жыл бұрын
Some people have done that. One had the red steel media container HF sells which is supposed to be a gravity feed, and run a small compressor into it to keep it moderately positively pressured.
@samcripes30462 жыл бұрын
Your daddy is a wise man. I'd follow his talking.
@PeterCrooks-ss4vs Жыл бұрын
Best Electric Pressure Washer!!
@junefletcher2 жыл бұрын
You can keep the water from getting into the tube by duct-taping it on top of the rod. Also, use pool filter sand. not all purpose--less likely to clog.
@ubeenlookingforthis Жыл бұрын
I got play sand at home depot and it is too wet out of the bag to use. I will have to spread it out on the driveway to dry it first! What a pin in the sand.
@m.m.9198 Жыл бұрын
The green green grass of the home...
@frankpirrone6032 Жыл бұрын
Nice work!
@Lanedar68 Жыл бұрын
Thanks for the video!
@carysaxmanbaskin7 ай бұрын
I'm assuming it would be ok to use a medium grade soda as the media to use to clean a motorcycle engine? Thanks
@Arod067 ай бұрын
Great video thank you so much
@Coodeville Жыл бұрын
Why doesnt surface rust form from the water?
@772777777777777 Жыл бұрын
You should be using glass bead..you can reuse will not clog wet or dry
@steverice7546 Жыл бұрын
“That way the water won’t tarnish the metal.” Unless you don’t count rust, I guess.
@oroomar2 жыл бұрын
hi. which is the minimun pressure of water required for wetblasting? i do not know which model of pressure washer to buy. thanks in advance
@dieseJL2 жыл бұрын
I think it says on whatever blaster you go to buy
@timothyiorlano1996 Жыл бұрын
You really shouldn't be using straight up sand...the panels are gonna rust from the salt content in it in no time, you may not see it but it'll blow out under your fresh paint job quicker than it should.
@boots7859 Жыл бұрын
There are some cheap products you can buy which you can add to your spayer soap compartment which prevent flash rusting. Heard one guy say to use laundry detergent, which is worth trying on a test subject as its very cheap. Or, just blast it, then run a blower or air compressor line over it, dry with cloth and spray on some primer.
@leannfletcher5093 Жыл бұрын
Is a 1900 psi Pressure washer have enough pressure to use? We be tried everything and the sand is Not going thru tube unless i held up hose in air!
@JamesBessert-ml8jf2 ай бұрын
I have a 2000 and it’s way to small, I’ve read you need at least 3000 11:42
@flipinjon74872 жыл бұрын
I'm a little confused on how the sand feeds through the tube I have an electric pressure washer would that work for it
@dieseJL2 жыл бұрын
It gets siphoned or sucked up the tube. If you're really curious look up the venturi effect hahaha. It may work, it really depends on the GPM/pressure of the washer. I think they have specs for what is needed on the Amazon part!
@boots7859 Жыл бұрын
I think he went over this like twice in the video...
@mossyoakshomestead88852 жыл бұрын
And then he looked down the barrel....
@RingZero2 жыл бұрын
The mess it creates, a wet sand blasting is not even worth it. Overall, its fun to do something in your backyard, if one has the "time" to kill 🙂
@boots7859 Жыл бұрын
It takes about 1 minute to do some common sense planning. I got a $10 kiddie wading pool, and some 5 mil tarps which cover the back 180 degrees of the pool. Put several small holes in the bottom and put some screen and cloth over them. I can recover my sand easily, spread it out on a sheet of plastic in the backyard to dry, and screen and re-use. Next time I'm done I think I'll just toss it all into a metal 55g drum and place it over a tree trimmings fire to fast dry it. Still need to screen it, however saving $20-30 every time I want to do some blasting is kinda nice.
@user-fb4bh5km5f Жыл бұрын
Does not work used playground sand then sifted through screen, no luck tried several times, dry sifted sand no luck, going to try silica sand next if that don't work it's going back
@naturaljoe7594 ай бұрын
Wear a respirator any time you are in the blasting area and make sure you have adequate ventilation! Silicosis is real, and the fractured sand particles can hang in the air for hours! There is a reason nobody sells silica sand as a blasting media.
@mad4tarmac2 жыл бұрын
Not enough flow rate in that washer,I've a old 5000 psi Honda that my friend borrowed for his cheap ass amazon blaster,he said my washer did his job 5 times faster then his 2800 one,that was cruel slow!! Still did the job though
@Theteese2 ай бұрын
Glass Bead all day long buddy....... My 4.2GPM pressure washer RIPS any shit off....
@soundman6645 Жыл бұрын
no matter what, sieve your sand
@thisisyourcaptainspeaking22598 ай бұрын
Gritty Kitty
@sergueiothonucci16388 ай бұрын
😃
@beachboardfan9544 Жыл бұрын
Sift your sand through a window screen first to keep from getting those bullshit clogs.
@dekonfrost7 Жыл бұрын
Lots of complaining
@m2useinu2 жыл бұрын
Thanks for the video that was great. I won't be buying one of those. thank you
@Interdiction Жыл бұрын
5 mins before you even started . Wake up and get the gear ready first
@jimdonbrock16688 ай бұрын
JUNK
@nathanpallavicini6687 Жыл бұрын
What a waste of time, could have preped both panels in the time before your first clog
more babbling any anything lol.............. He did so many things wrong in this video almost amusing!
@jimmybuffit229 Жыл бұрын
Let the guy be he is trying. What have you accomplished
@BuildBreakFix Жыл бұрын
@@jimmybuffit229 hum well I have a medal of valor, gold medal if service to country. Medal of achievement and 5 houses and wife that would make you have a heart attack from lose of blood flow to rest of your body so yeah not much you?