Fuel filters on the Ford 6.0 powerstroke, O.E. versus aftermarket

[@jfubele]

I know Ron has passed but, to his family..... Ron gave the You Tube community so much valuable information that is incredible. He was priceless and his videos keep his legacy continuing through eternity!

[@Colorado4x4]

Amen! I was scouring KZbin for the best Ford diesel “how-to” videos and when I found Ron’s videos, I looked no further. All of his videos are thorough, his comments are insightful and what a great personality. Love it.

[@h1ll13illy2]

no doubt man. i just recently purchased a 6.0 and u can tell this guy knows his business

[@DaveyBlue32]

That’s a darn shame but yes indeed…he’ll live on and continue to help guy’s who have 6.0’s and need a great clear very informative video on how to do things properly! RIP Ron!!!

[@bryanbatton01]

Go Georgia Southern!!!!

[@miket4593]

Absolutely, thank you to Ron’s family. Your dad gives me the confidence to work on my 6.0. He keeps impacting the community though his videos.

[@moealbasateneh2074]

Thanks Ron, you may be gone, but your videos always help us. Rest easy. Sucks here now anyways..

[@bigdog976]

OH HOW I MISS YOU WORKING ON MY 6.0 YOU WHERE A GOOD MAN RON RIP

[@claudesmoot1880]

Thank you to Ron's family. I appreciate y'all keeping the videos up. They still help me with my truck.

[@pedropunjabi7339]

Dont just thank them, donate

[@outwestcountryliving9735]

Wish I had known about Ron before. Love his videos. Thanks to the family for keeping them going. He was a great teacher and full of knowledge.

[@justinbarnes7863]

To rons family, you're dad truly helping me fix my 6.0... may he r.i.p

[@CHECKERD444]

Extremely helpful info for a 1st time 6.0 F250 owner...A++

[@jimmydillard2745]

It says torque it the 14 newton meters but here in the real world you just kinda go like this.. that's why I love you Ron you show it/tell it like it is on everything

[@larryjanson4011]

DieselTechRon is missed,. he has saved me lots of money, time, and trouble. I say thank you to his family for keeping his videos up and running, as this will keep him alive in the harts of many.

[@grantottaviano7445]

Thank you Ron, you are continuing to help people save tons of money even after your passing. You are an inspiration as to how everyone should treat each other in this world. Your legacy lives on through this channel. Rest In Peace sir, you will be missed.

[@ALittleOG]

RiP Ron, you been getting me by on my 6.0 for past 8 years. Your legacy carries on brotha.

[@soldieroflife4449]

My condolences to the family. I just bought my first power stroke and this video helped a ton. I'm use to my Cummins system. God bless.

[@nickngaopraseut6717]

RIP Ron! Even with you being gone, you're still helping us struggling 6.0 guys out on these how to videos

[@piperdoug428]

Thanks Ron, sometimes even if i kinda know the answer i just like to hear it from the Guru. Thankyou to his family for keeping the channel up.

[@agoodneighborautorepair2176]

He was and he still a best teacher on diesel trucks, Ford product..God bless his family..

[@bobgreen2000]

Man your videos have saved me so much money. I've been watching you for 8 yrs now. I've learned so much that I just bought my second 6.0 with confidence. Thanks for all you do.

[@bobgreen2000]

Wow, I just realized that he passed. Hope hsi family knows the impact he's had on me and I'm sure, the 6.0 community. May he rest in peace.

[@Kryochrysalis]

Appreciate such wisdom from learned Ron on the finer points of his mech experience. Thx for keeping these videos running family, he is a great help to tech challenged & just great guy! Miss you, yet look forward to meeting you in The Kingdom!

[@wolfie_-fw7xs]

I just started in Diesel Repair , been working on cars and trucks my hole life ! I am now the Head Mechanic for the town of Montpelier Ohio , I'm 52 yrs old , And really enjoy learning from your videos , Please keep it up ! you are helping me a lot , you make it so easy to find a lot on the problems I'm running into , Thank you !!!

[@monelfunkawitz]

Ron passed away in 2016. He was driving his VW Beetle when he was hit by a guy dozing off and was thrown out from the sunroof.

[@johnhill3706]

Thank you for your great videos, your greatly missed and not forgotten. Rest in peace RIP

[@shaned8153]

Thanking you even though you’re gone. We appreciate this man and his smarts and tips live on

[@lester09ish]

I wish he had done a fuel flow test but this is a great video I really like how in-depth he goes!

[@jameschrisdavis]

Thanks for these videos, I love watching them. I havent owned a 6.0 in years, but I still enjoyed watching these videos.

[@Cumminsturbo205]

Hey Ron, thanks for the info. Just got a '06 f250 with the 6.0 and I just picked up the motorcraft fuel and oil filters and I am about change all of them for the first time. Nice to have the video as a reference. Thanks again.

[@istvanmeissler2238]

Ron, I just wanted to thank you for your excellent videos. One video you did, you admitted a mistake you made (something you missed the first time you looked over the engine). I knew right then you are an excellent mechanic. A lesser mechanic would NEVER have admitted a mistake, let alone make a video about it so everyone could learn from it. I am a much better mechanic because of you. You should get a Bluetooth mic which clips onto your shirt. I see lots of KZbin contributors using them. God bless.

[@leonardburke1459]

Always the best especially for 6.0L information . Straight to the point.

[@jumpinggulley]

Another fine video. I found out the hard way yesterday to use Motorcraft. I changed my filters with napa filters. The truck ran for a few minutes and then ran out of fuel and quit. No fuel in the upper filter. I feared the worst (fuel pump). I took the lower filter out and re installed it, nothing, and I could hear the pump running. I went to Orielly's to get a motorcraft filter. After install, I turned the key on and instantly fuel appeared. I have used aftermarket filters before, but no more on the 6.0.

[@donjohnson5653]

RIP Ron.. sorry for your troubles brother....Thanks for the help.

[@DeTroiT187]

Thank you again for taking your time and putting it out there great foot note on draining the water cavity on the fuel pump 👏👏👏

[@1turfguy]

I know I'm late to the party...... Very shocking and educating as well when you refer to the Napa Gold. I was always told those were made by wix and they were very good filters Hell I use them on my drag car. Thanks for the heads up!

[@moparecodiesel]

Wow, thank you ron, this was very unbiased, comparative, and informative. Nice comparison among all the major brands. The white ebay filter, i know the owner and worked personally with steve to develop and perfect the oil filter for the ram ecodiesel. Im going to forward this video to show him a professional opinion on his fuel filter.

[@chadharmon5716]

Hey Shawn lol

[@davidmccauley2928]

no aftermarket parts on psd. it cost the customer more in the long run in tows and down time. OEM only I have hap more problems with aftermarket parts on these diesel's. causes you to second guess ur self and waste time. thanks keep posting ur videos are awesome. I love to see them in my email. next time I need a ficm I'm buying it from you. Dave from Pittsburgh PA

[@clemsontigerfan3905]

Very helpful! So sorry he’s no longer with us.

[@khalbanks]

Thanks for another informative video. I have saved a lot of time and money by watching the videos that you have posted.

[@josephbonilla5910]

Best teacher we missing you 😔🇺🇸 Sir :(

[@colloidalsilver1096]

Thank you Ron; for all you did for us!

[@redhorse554det1]

enjoy your vids. love the truth being told to the public. OEM , in most cases is the best choice. in the mil. , we'd order a nsn number and it might be a fram , lurifiner, Baldwin , wix.

[@topofthefoodchainz3665]

Loving the f250 6.0 videos! SUBSCRIBED!👍😁✌️

[@S_man89]

Easy fix is to just use motorcraft filters. Then you have no question in mind. That's what I do on my 7.3, a little peace of mind in my opinion

[@RTFLDGR]

worth every dollar.

[@SamSung-zy3ne]

We miss you, Ron!

[@chalmerelkins8965]

just found this video.looking for some 6.0 power stroke info. Sorry to hear about Ron,appreciate the video.

[@marcpugliese7721]

I USE MOTORCRAFT ONLY! NO AFTERMARKET FILTERS. FLEET OF 14 F450 DIESELS! I CLEAN THE LOWER FUEL CONDITIONER EVERY TIME IN MARYLAND (HIGH HUMIDITY. GOOD INFO, THANKS!

[@thposman]

On my '05 F350 It's a 35mm socket for the lower fuel filter cap. Also - note that if you do open the 6mm allen on the water/diesel separator it will continue to drain for quite awhile until you close it.

[@kellyh4035]

I was told that the vent hole and membrane were important. The membrane on the OEM helps with water separation in cooler, and temperature changing climates.

[@Fdmartinez419]

Good info here! I use racor for all my filters! A lot cheaper then going to a dealer. But I wlto would like to ask some questions when you have some free time.

[@posenauto]

Good info..Thanks again Ron.

[@browneyezuscg]

Glad your doing videos again!

[@henrybroughton3464]

Thanks for the video , when you change the felter should you put a small amount of diesel in the top felter very helpful thanks

[@Skipperj]

Good info,thanks Ron I didn't know some of those things.

[@gloknor]

Sometimes I just use a regular oil filter wrench on the lower fuel filter especially when it is on very tight.

[@2lotsill]

gloknor Thanks. Will have to try that next time when it won’t move.

[@robbyvanz]

Ron, do you mind sharing which Ebay seller you get your fuel filters from? thanks.

[@Travecmo]

Straight forward quality information

[@michaelcanto6175]

Miss you Ron!

[@jimmcmillen4695]

I also have f350 2006 6.0 with a 142000 just had #2 glow plug go out need to get that fixed before winter..

[@jerrycrouch1223]

Yeah THANKS Diesel Ron Your GREAT Help : RIP :

[@black07rr]

RIP Ron

[@CSXtrackworker]

He died???!!! What happened??

[@AmericanMan961]

check his channel

[@Reaglesracing44_]

CSXtrackworker died in a crash on his way to work. got t boned and was ejected thru the sun roof of his car and died

[@ramoncarrasco3283]

I don't speak good English but I understand everything.. thanks.

[@narekdiesel]

“If you like it put some assembly lube on it” YEAHHH RON!

[@mark98115]

I am shocked that Baldwin filters are at the bottom. I have always thought that Baldwin and Donaldson were the best you could get. I have an RV with a Cat engine and I pretty much stick to Baldwin, Donaldson and Cat for my filters.

[@maximeguilbeault5698]

Thanks again Ron 🙏😇

[@agoodneighborautorepair2176]

He still a legend

[@kathiemaravi9478]

Thank you you’re awesome 👏

[@eddiemorales7066]

Thank You for the product info

[@shawnbixby1]

Legend!

[@stevegarofalo8383]

Thanks for all the GREAT Video's Ron. Quick question for you on the top fuel filter. I've only ever used the original Ford replacement filters and have noticed the past few times I've changed them that even with the engine off (overnight) when I remove the upper fuel filter cap I can hear pressure being released. Is that normal?

[@knasasduckkiller]

Fleet guard makes these filters. Can buy them through a fleet guard dealer for about 1/2 what you can a motor crap

[@niceguy4928]

I take what you say regarding powerstrokes as gospel...Which eBay aftermarket fuel filter was the one you recommend?? The $70 motor craft fuel filter is a little steep imho. Thanks again for the videos.

[@Mike-my7uc]

motor craft fuel filter ebay for 39 bucks

[@jdigitalseven7]

My friend lost a whole tank of fuel and almost got in an accident from it getting all over the tires by using AutoZone filter. OEM or Napa do not cause problems though.

[@Mebob2001]

ill agure with anything after market when it comes to clean fuel... if they say 4 microns is required, yes going to a 2 micron sounds better right? cept for its going to be lowering the supply to pump and injectors which equals a little less return rate! least thats how i feel i say OEM all the way with oil and fuel filters

[@gregmosczynski5928]

How often should I change fuel filters

[@patallen9747]

great video. very good info.

[@michaelfrey7268]

Does the port holes on the top fuel filter cap matter my old cap had 2 port holes on each side of cap my new cap had no holes and now my truck will not start or run

[@jeffnelson5211]

I have a 03 6.0 and recently did a service on it and after I had a miss after watching your video I think its from the Napa fuel filter could this happen

[@gregmosczynski5928]

How often should they be replaced

[@dillonlewis8892]

what ebay filter Ron?? would you please share who the seller is a or which ones @DieselTechRon

[@Jose-eb4vf]

Thank you, Cus.

[@meandean222]

Great video!

[@royschmidt4856]

I just changed my fuel filters and noticed the secondary was dry. that was the first time that has happened. do you have any ideas what would cause that.

[@TheWaelabo02]

Thank you

[@steveadams8977]

So you dont have to drain the fuel 1st like you do on the 7.3 ?

[@careylee5951]

Flip socket? Going to have to ask our snap-on guy about this. Never seen one in Canada.

[@d1bigshifter737]

What would Ron tell me about after market injectors that are better than the stock. If there are any.

[@piperdoug428]

Powerstroke help.com

[@MysticOreo]

Great vid! Thanks!

[@Graveltrucking]

Why chance aftermarket filters I don't I never have and never had issues use factory Ford filters and be done with it end of story. Here in BC Canada a 5 gallon pail of 5w-40 Delo 400 costs me 144 dollars, a oil filter from Ford is 30 dollars, fuel filters are 97 dollars. Did both on my truck 2 weeks ago I'm good for another 6 months. The Rotella T6 costs 235 dollars for 5 gallons so I use Delo been using it for 6 years or more. I keep my fuel tank over half full so I never run into condensation issues and I only buy my fuel from 2 places.

[@mtwz71]

Another reason why I buy OEM filters only.

[@Boots67]

Thanks Ron

[@javierpalacios450]

Legend

[@pilotvega3686]

Hey Ron, I think I have water in my tank I have a 2004 F250 6.0L what can I do? I just replaced all my glow plugs and wiring harness, I started the truck and a few seconds later it shutdown just as before. I'm not sure what to do please help!

[@walosautorepair5046]

Thank you.

[@drewgrob6346]

Whats the part number on that snap on socket

[@RogerMetcalf-c2l]

what does fuel filter come out black

[@whiteopz]

Real deal

[@grumpyg9350]

Thanks Ron......

[@robinkelley8124]

What is the name of the filters that you bought for $12 on ebay

[@PaddleDogC5]

JUnk

[@carlthornton3076]

Very Good!...

[@douglasrios6490]

Hello friend where is your workshop is it in miami ; please I want you see my truck ford 6.0 ,let me know

[@letaloudone]

He has passed away.

[@Dirtyharry70585]

does the OEM or ebay come with new O-rings?

[@PaddleDogC5]

yes

[@d1bigshifter737]

On 05 Excursion you can get filter wrench on . You have to double up on extensions or like he uses a 24 inch . That must be a 2wheel drive cuz 4 wheel the shaft and transfer case would be right there with a small window to work in . There for use extenson to get you beyond crossmember but upon removal your ratchet head will back up against transfer case. . 270000 miles 3 sets of injectors oil change every 8000 10000 miles .when it runs it runs like a raped ape . When it is sick I want to drive it thru Ford's front window

[@d1bigshifter737]

Can't get filter wrench on....

[@elloquitoloquito3247]

I have 2003 Ford F-250 it’s not starting???

[@maximeguilbeault5698]

Thanks