DIFFERENCES BETWEEN TRANSDUCERS: LSS2, TOTALSCAN, HDI, 83/200, 3D

[@sasascepanovic172]

There are a lot of explanations and video instructions but your instructions are enough for everyone.Thx

[@rogly90]

Great video. You should do an update to this video for 2022 with more recent tranducers like the 50/200 hdi, splitshot, trpleshot etc...

[@steveking8548]

I don’t think he experienced fisherman use split shot or triple shot transducers

[@hashtagsal]

Witch one comes with the GO5 XSE? I am having trouble to select the right transducer type on it.

[@chrisvonderau9252]

Best explanation I've heard yet. Thanks!

[@domciorciari9823]

Good to hear from someone who knows what he's talking about and is honest. Thanks, and keep the videos coming .

[@Jay-iq6yh]

I am a complete beginner and really appreciate you taking the time to explain this. Until now I didnt know the difference and nobody has explained. Thank you from the UK !

[@nicholaskanaan3800]

Found this video while trying to find more info on specifics of Lowrance transducers. Do you know exactly which transducers comes with the 2022 Nitro Z19 Pro package? It says "StructureScan". Does this mean that they do not include traditional 2D sonar in the package (if I understand correctly). Thanks for the helpful video.

[@SargesAdventures]

I have an Elite Ti2 7 inch with a 2 in 1 transducer.... if I bought a used HDS 9 Gen 3 with a downscan transducer, can I take the 3 in 1 off the 7 inch Ti2 and put it on the HDS 9 head unit?

[@lunkerdunkerbaits4064]

Great video, thanks for being honest and clear with each unit. Can you tell us which units, besides the first one you mentioned, can be mounted inside the hull? Thank you!

[@mallydawg479]

THANKS FOR DOING THIS VIDEO, ? i HAVE A HDS GEN 2 TOUCH SO DO i NEED TWO TRANSDUCERS TO MAKE THE MOST OF THE UNIT?

[@LorenP]

Thumbs up from Toledo, OH! Very informative video, thanks for taking the time to post.

[@RussellMarineProductsLLC]

Thanks for taking the time to watch it! Greatly appreciated!

[@sikassscivic]

So the totalscan can do everything except 3D? I just bought a HDS gen3 so I’m looking at getting my transducer now. If I decided to do 3D later , can it be added on with the totalscan?

[@amandasettee8922]

finally found someone with the knowledge thanks a lot

[@michaelbrindle7154]

If you used a HDI trans on a gen 2 non-touch, would you get downscan if a structure scan hd unit is on the network?

[@kenrobertson1463]

Great video, I have the Blue HDI transducer. any difference from the black

[@dbender3644]

Bro, I bought the TotalScan transducer and a HDS Touch Gen 2 from you guys cause you said in the video at 4:30 that you can use the TotalScan transducer with HDS units and you CAN NOT use the Total Scan transducer with the HDS Touch Gen 2 models. I installed the TotalScan on my boat yesterday, was all pumped to try out the HDS Touch this morning and hooray flipping nothing worked!!! And ya, I went into the settings for the sonar and tried to find the model of transducer in the menu and guess what, it's not there. Just for fun I tried selecting every model of transducer in there to see if 1 of them would work and nothing. Sooooooo ya, there ya go.

[@BIGPIMPN01]

Funny I asked the same question with the Lowrance Tech and they said the totalscan will not work with the hds12 gen 2 touch... use the lss2

[@robertdaoud6837]

Which option transducer would you choose on a HD’s carbon when you have the total scan transducer?! Great video brotha

[@teddjohnson2]

This is great! Can you or did you do one for the humminbird ducers?? Looks like the new g4 units on helix use the same ducer but there might be alternatives or upgrades?

[@johng8049]

I thought you had to have a skimmer/transducer that had chirp in it. Are you saying the hst/wsbl will do chirp. You did not show or talk about the LSS1 I know its outdated. I have the HDS gen1 with the LSS1 and you must have module for it. I am thinking of adding a Gen3 into the mix. Would that work with the LSS1 & i would guess i would then have chirp

[@bertrosado1969]

OK, maybe you can help me. What transducers would you have on the boat? Are any of them thru the hull? Do you have a 83/200 and a 3D module? Is the 83/200 thru the hull? I have tried twice to get the Lowrance folks to help me trick out my boat without success. They refer me to "the dealer". I want to know from a users like you what you found is the best combo. BTW, what are your thoughts on Spotlight?

[@RussellMarineProductsLLC]

We have the 83/200 epoxied thru the hull and have the lss2 mounted externally. No need for the 3d module unless you have the 3d transducer. The spotlight scan is decent. I prefer the hdi transducer for 2d sonar and down imaging. BUT sometimes you can find a great deal on a new spotlight scan and it is cheaper than the hdi transducer and trolling motor adapter. When you mean "trick out" what are you looking to do? We have some great deals on new HDS gen3 boat in a box bundles that literally have everything you need to completely set up a boat.

[@bertrosado1969]

What I have is a Triton 21X3 with Humminbird 1197 & 997 since 2009. Both are not worthwhile. Tricking out is my term for having this awesome fishing machine with Carbon units front and back. I want to maximize the complete potential of these units. So what I am looking for is any and all combinations of transducers that will give me that edge. Is it 3D Structure, SI, Sonar, and what is the best combination of transducers to go with it. Lowrance emails are useless since they refer to you; the dealer. This is their latest answer "LSS-HD is part number 000-10802-001. The HST-WSBL is a skimmer transducer that uses 83/200 kHz. Make sure you have CHIRP." So if I were to call your store, what should be on the shopping list? I would like to have it detailed. Pretend you are doing a boat that has no electronics. Thank you for your previous prompt reply and useful information.

[@RussellMarineProductsLLC]

Bert Rosado send us an email at: [e-mail]. I can give you a breakdown of everything and the advantages of everything.

[@RiverRatCatfishing1]

Will you answer the ultimate question.... Will the totalscan transducer work with an hds 9 gen 2 touch? I keep hearing yes if you have the most current update.

[@RICHJMS]

What's the number on the 3D transducer? Thanks

[@thecastingdeck9204]

The HDI transducer in your video looks a bit different than ones I'm looking up. Is there a difference between the one in the video and a "skimmer" I will be mounting this on my trolling motor and am looking up the correct adapter to do so. I've found the transducer in the video HDI as well as one that looks a bit different, the "skimmer". The only adapter I've found says it's for the skimmer. Thanks in advance!

[@ratunaiqamatawakelalabalav5522]

Bula from fiji..So i just bought a new hds live unit and wanted to pair it with a hdi 50/200 skimmer 9pin since its an affordable transducer and has chirp big plus from the p66 . For offshore use since we dont have lakes in fiji lol.. would that be a good set up for ranges between 60 to 350m thanks.

[@ericrowsey9010]

Question? I just got a Lowrance Elite-7 Chirp from a guy I work with and the transducer cable was no good. What make/model transducer do I need to buy? Any info will be appreciated.

[@diadepesca4510]

I bought the hds 7 gen 3 about 5 months ago. It came with the total scan transducer. 2 D sonar,Down Scan and side scann. My screen resolution looks kind of blurry either if i have it on 2D sonar or Down Scan. I selected the right transducer on settings. Can you please help?

[@mtsaz100]

great video- I just got a hds9 with the "package" and this made many confusing details much clearer. Thank you!

[@tajtalright]

So, if i buy a Carbon 9 with the 3d structure bundle, then i cant get splitscreen with structure scan to the right and 2d on left? (if i use the transducer for 3d and HST-WSBL for 2d ) am i correct?

[@mikehamilton4433]

I want to add side imaging with the LSS 2 trans. on my HDS7 Touch and move my HDI transducer to the 7 Pin sonar port. Will I just need a 9 to 7 pin adapter cable? Also will I still be able to get the water temp reading from the HDI this way or does the LSS 2 provide that?

[@divergent2619]

would it be worth buyinh the carbon 12 for $1500 then getting the 3 in 1 and attaching it to a ghost or just get the hds live?

[@dangerdave22]

Question, I have the Lowrance 3D transducer and HDS Live set up now. I need to add the HDI transducer to get 2d sonar and water temp working. How close can the 3D transducer and HDI transducer be mounted with out causing any interference? My current plan is side by side with about 2-3" spacing. TYIA

[@TheGunner357]

Thank you You just answered all my questions.......

[@ralph9987]

brilliant video!! can the total transducer or the Lss2 transducer be mounted in " thru hull".i have a sail boat with no defined transome. Tia

[@chriscraig4640]

Ok guys I need help I recently got a HDS gen2 and I have a total scam transducer but when I turn my graph on all I get is a water temp no depth and I’m not sure if I have the right transducer selected on the list under sonar option and my sonar and structure are not reading right I need help ASAP I have a tourney tomorrow thanks again!!!!!!!!

[@ottercreekhoneyguy9464]

I have a Gen 3 with paired up with the Ultrex. I'm not getting a great sonar reading ( clarity, consistency) so I'm thinking of getting the HDI Transducer but what adapter will I need to put the transducer on the Ultrex.

[@kenmaylin4744]

Thank you for this video ! I have been trying to sort out depth finders and transducers for 2 weeks now. I went so far as to call Lowrance tech and I got connected with a lady who couldn't even use the English language let alone a Lowrance depth finder. I ordered my HDs carbon 9 from Russell Marine today because of this video.

[@jamienichols6277]

My HDS9 gen 2 side transducer is cracked and now my system locks up if I turn it on in the menu. Or it's because I moved it to my pocket on my flats boat? The structure scan transducer was mounted to my hull bottom and I moved it in hopes of reducing drag. My boat doesn't go any fast and now I'm without side scan. Is the cracked transducer dead or is it the new location? Any advise would be very much appreciated!

[@985live]

Will the 3 n 1 transducer be good on a bay boat?

[@paulwykle3674]

How do you run your cable when you mount to a trolling motor? Mainly a terrova

[@stan6132]

Whats the difference for the side imaging quality in the total scan transducer Vs. The LSS-2 transducer. Does the total scan transducer NOT have HD side imaging compared to the LSS-2???

[@cemalbuyuksavas2197]

Hi 👋 Can i create map with active imaging 3 in 1 on simrad evo 3 while i use sidescan?

[@gtolson8989]

I’ve currently got a lss-2 and skimmer transducer mounted on my boat from my gen 2 touch units. I upgraded one to a gen 3 unit and it came with a totalscan transducer. Is there any point to remove what I got and install the totalscan? Is it any “better”?

[@sbhiggs5]

Great video. Thanks for taking the time to break these transducers down.

[@sakissas7975]

Total scan can work in hook series?

[@plhonthelake2157]

What is the difference between Totalscan and TripleShot. Are they interchangeable? (i have on Elite Ti 9)

[@razorheroes]

Great video! I just have one question. I just purchased a Gen3 which came with a 83/200 ducer. Which set will give me a better image? The TotalScan or the bundle (LSS2 skimmer + 83/200)? I still have the felling that lss2+83/200 will do a better job than the "all-in-one" totalscan. What do you think? Thanks!

[@45Concealed1911]

thought this might be in russian with the red star and backwards R, Trying to decide on a fishfinder, thanks for the info.

[@lassaadlahmar581]

What do suggest for Arthur hull 3D transducer to go with HDS 12 live

[@69Bowhunter]

Question why won’t my old 2D sonars hook up to my new HDS Live but fit my HDS Gen3 ? Thanks

[@mindobersaglia3374]

I have been thinking about getting a total scan for my HDS 7. With the unit I have now I have structure scan transducer and a skimmer transducer. Would I have to unhook one of those to use the total scan ? It is a Gen 3 touch

[@liljohnand06]

Great Videos. Always very informative.

[@ExtremeDeerHabitat]

Finally found an explanation. Thank you.

[@grog01]

I've got a Gen2 Insight (not touch). Will the HDI transducer work with it?

[@kaybo153]

Does anybody know the part number for the Lowrance x65 transducer trying to find one

[@lardupont]

Why the big price difference between the hds 7 live to the hds 9 live?

[@jerrylney1456]

very informative I love the fact that you are brutily honest keep the videos coming

[@nathanwoolford7530]

That clears alot up, how deep will the totalscan see fish in salt water , would it go 150+m? If not what trans would be best Thanks

[@marineelectronicsinstallat2617]

Nathan Woolford 3D imaging with the Totalscan is limited to about 150 feet maximum in salt water. The traditional & “Chirp” depth (2D as it’s called in this video) will work much deeper. I have seen it working at 250 feet, but doesn’t show a lot of detail beyond 200 feet deep. For saltwater use in water over 100 feet deep we usually install a thru hull transducer, and usually suggest switching to Simrad (Navico owns both Lowrance & Simrad). Simrad is more aimed at offshore saltwater use & Lowrance is mainly a freshwater and coastal unit. Hope this helps.

[@JroyBulldoggin]

Can I run a total scan transducer with a HDS9 Gen 2????

[@RussellMarineProductsLLC]

No. LSS2 would be the newest you could run on the Gen 2.

[@JroyBulldoggin]

@@RussellMarineProductsLLC thank you ser🦾

[@rrgH20polo]

Wjat about the 3 in 1 Transducer

[@DennisBomBom]

Thanks. Very helpful.. Appreciate your honesty!

[@MrGambitx13]

What transducer type do i select on my carbon for the hdi ghost trolling motor?

[@brucewalker1908]

What about the Lowrance Triple scan transducer

[@tommyliu4683]

I just upgraded to the Lowrance 000-14489-001 Active Imaging 3-In-1 for my Nss Evo3. Do you know if I will also need the skimmer 83/200 transducer in order to take advantage of the fish reveal feature? From the manual it seems I will need both. Thanks in advance and great video!

[@davidj.3583]

I run an HDS gen 3 with an HDI Transducer. Can you tell me which one to select on the unit? There are 3-4 different ones that show HDI. Currently it shows HST-WSBL / HST-WSU but I’m not sure that’s correct.

[@RussellMarineProductsLLC]

David Jensen you will need to select HDI 83/200+455/800 sir. Then make sure when you go to structure scan that you change the view from “left+right” to “down”

[@davidj.3583]

Thank you. I also have the LSS2 so it will still do the side imaging without having to change anything else right?

[@Nick-vx6pr]

I just bought elite 9ti and want to purchase least expensive unit for bow trolling motor for sonar and down scan and that can be linked?

[@martyepperly5803]

I'm using the HDI transducer mounted on my trolling motor to my bow mounted Elite 9. Works great!

[@brucejarrell5707]

Good video! Will the HST wsbl fit my HDS 7 insight? Thanks

[@derekwalters7142]

Do you still need the 3D box to run structure scan on the 3D transducer, or can this transducer hook directly up to the Lowrance HDS Gen3.

[@RussellMarineProductsLLC]

with the 3d setup you will need to use the 3d module and transducer, it will cannot plug directly into the back of the unit itself.

[@stevesmith5470]

In a previous video you said you thought the 3D was worth the upgrade. In this video you say not so much. More info?

[@RussellMarineProductsLLC]

3d isn't impressive and I have continued to state that, BUT the side imaging and down imaging using the 3d module and transducer is better than the lss2 transducer.

[@stevesmith5470]

Russell Marine Products, LLC Gotcha. Can you do these without buying the module?

[@ferdiesagun8074]

I have lawrence hooks 7. Can i put the transducer inside my haul ?

[@WattsBarBassin]

Thanks for the video!

[@OopDeOopFishin]

Hello Justin, I just watched and subbed. You really cleared up a bunch of questions that I had. But I do have a question about the skimmer. I just purchased a new HDS7 gen3 that came with the lss2 for my new native titan 10.5 kayak. I mounted the LSS2 under the boat and after watching your vid I realized I need to use the other ducer also. So here is my question. If I epoxy the skimmer to the hull will it read water temps? And if no, can the LSS2 read water temps.

[@RussellMarineProductsLLC]

it will read water temps, but it will read the water temps from being epoxied in, not the direct water temp since it isn't in the water. We typically see the water temps off about a degree or so with the transducer being glassed in vs. mounted in the water.

[@OopDeOopFishin]

Russell Marine Products, LLC Thanks for the response!! 1 or 2deg off isn’t to bad. The hull thickness is probably a fat 1/8th so the bottom will pretty much be the temp of the water. My lss2 is mounted toward the bow of the yak. Should the skimmer be mounted within the same area? I can either put it in the front bow just in front of the lss2 or I have Nice flat spot near the stern. Where do think it’s best?

[@justonefilippo]

Really helpful! Thanks for sharing. Question: will the HDI 83/200/455/800 work with Gen 3 units? Not just touch but with keys too. I keep reading different opinion and in your video you only mentioned "Gen 2 and 3 touch units". Thanks!

[@RussellMarineProductsLLC]

Gen3 units are touch units, and it is compatible with gen3 units. You will need to select the hdi transducer under your installation settings In your sonar section to utlilize all the hdi transducer functions.

[@justonefilippo]

Thank you!

[@dalecroft4017]

@@RussellMarineProductsLLC just wondering which transducer setting I use for a gen3 with a totalscan transducer??....thanks for your help....

[@thecastingdeck9204]

Very simple clarification, thank you.

[@thebigcountry6757]

Question, I have a Hook 7 and the the HDI transducer. Can this transducer be mounted in hull ? Right now I have it mounted in a shield & saver on my jack plate and I loose all readings once I'm on plane. Can it be mounted in hull ?

[@RussellMarineProductsLLC]

TheBIGcountry67 yes it can be glsssd or epoxied in to shoot thru the hull.

[@thebigcountry6757]

Than you for the quick response. That's good news ! I've been enjoying your videos. Keep up the good work !

[@allahuakbro5513]

What would be the best transducer to have for a Lowrance Hook 9 Chirp?

[@joseponce3674]

Excellent explanation .Thank you!

[@billwest5330]

My unit doesn’t recognize my transducer for Elite 9 Ti, transducer is on trolling motor

[@marvinallen2161]

i just purchased a carbon 9 with total transducer what transducer do i need too load into unit

[@shamrock4life04]

What transducer would you recommend for hds7 gen3. I mainly fish 30m to 70m for reef fish. Sounding ground at speed is essential.

[@lassaadlahmar581]

Thank you for the very informative video brilliant

[@tenplus1025]

Nice brother! Smoked two transducers at Fork last year on stumps. Lowrance is my product. But the Humminbird rip off artists have their work cut out for them competing with Garmin and Hummingbird.

[@elliotowens8033]

Can a hdi transducer be epoxy in to shoot through hull

[@bbowman2002]

So what will the new hook 2 9 come with? Will it be one transducer? I have the hook 5, does it mean I will have to have a second transducer for side scan if I go with Hook2 9 on my kayak? Also how big will it be?

[@RussellMarineProductsLLC]

hook2-9 tripleshot will have one transducer. It's similar to the totalscan transducer for the elite ti and hds series of products. It's just as long as the totalscan but not nearly as wide.

[@terryfarris263]

Do you know anything yet about the new HOOK2 transducers called "Splitshot" (sonar + downscan) and TripleShot (adds sidescan) for trolling motor mount

[@RussellMarineProductsLLC]

Terry Farris yes sir, know a lot. What questions do you have?

[@terryfarris263]

Is the tripleshot same as Totalscan? Can I use an aftermarket Trolling motor mount designed for Totalscan to mount the TripleShot HOOK2-12 ducer to my trolling motor?

[@benjaminmota5861]

Do you recommend anybody in central to south Texas to do work for my Lowrance units?

[@doylesouders1228]

Can you update this with the 3 in 1 transducer that is available with Elite Ti2?

[@patrickomeara7278]

That’s the “total scan”

[@crunchied8]

i am trying to find good transducer to do both side and depth 2d or 3d its not going on a boat but a jetski

[@southernexposureoutdoors289]

Great info,wish I would have found it 2 hours ago!

[@dacca007]

Thanks for the explanation finally someone with direct simple answers

[@jeff8062]

This explained everything, thanks bro

[@catfishcapone8527]

Hey, great stuff here guys!

[@RussellMarineProductsLLC]

We appreciate the compliment!

[@chasestrode]

Great video

[@mr.chadwick1049]

What transducer do you recommend?

[@RussellMarineProductsLLC]

Mostly will depend on application. For most bass boats, the 83/200 glassed in the hull and the lss2 mounted externally will be the best combination.

[@joelstanhope7231]

Bought a carbon 5 years ago , screwed the transducers (had 2 on one cable) trying to find original transducers like trying to find guppies in a bass lake

[@joecarrazy6894]

Great vid. Cleared up a lot for me. Thank you!

[@michaeldarby2242]

Thank you sir, very informative

[@JohnEastonFishTecCharts]

Great video!

[@RussellMarineProductsLLC]

Thanks John!

[@hmglor]

Really helpful info!! Im in the market for fish finder and this vid explains a lot.. thank u!!

[@carracer4877]

Let’s see some pics of the differences in image quality from the 3D side scan/down and the Lss 2!

[@tenplus1025]

carracer48 yep 👍

[@gilvaladez2943]

Can i through hull HdI transducer??? Thanks

[@tenplus1025]

Gil Valadez nope