Difficult to Strip - Low Smoke Zero Halogen White Twin & Earth Cables? Doncaster Cables Solution

[@brianoceallaigh8714]

Can you imagine trying to make off ceiling roses or light fittings at height using this cable! I think myself using the cpc with a pliers will be only way to go unless they come up with a new stripping tool for this cable... Enjoyable video guy's... Top class...

[@GSHElectrical]

Hi, for me I would pull the cpc out and up the cable on site... but sadly this is not a method we can use at college as the cable lengths are often short in length and we run the risk of pulling it out. Thanks for commenting and watching. Gaz

[@eddprice4571]

The struggle is real Gaz. Great video guys 🙂

[@GSHElectrical]

Hi, for me I would pull the cpc out and up the cable on site... but sadly this is not a method we can use at college as the cable lengths are often short in length and we run the risk of pulling it out. Thanks for commenting and watching. Gaz

[@HeathenGeek]

Someone from Jokari should send yous some No 14 Flat Cable Strippers :-)

[@RaithUK]

Another useful and informative video guys thank you.

[@silversurfer50001]

THANK YOU SOOOO MUCH. I have recently started my level 2 2365 and your channel is 100% better than anything I learnt at college. Because we have a few sparks in the class it Seems like the lectures assume we all know what were doing so they go through things at light speed. But the way you explain things is so simple but very effective. I was actually thinking of withdrawing from course and saving my money until I came across your channel. GSH MY NEW CHURCH AND YOU MY FRIEN ARE A GOD 🤣. BUT SERIOUSLY, THANK YOU.

[@GSHElectrical]

Wow what a fantastic message. I am glad my channel has helped you, please stick with your course hard work has its rewards. All the best Gaz

[@GSHElectrical]

Thanks for the wonderful message I am glad my channel has helped you. Please stick with your course... hard work has its rewards. All the best and thanks again Gaz

[@wallbouncer9655]

Great video GSH Electrical... time to get fit Gaz 🤣.

[@channelI748]

I was on a job, I could strip the outside white sheath but not the individual Live and Neutral with my wire striped. I was advised to use a cable cutter.

[@simonschertler3034]

Here in Germany there are also big differences between the different manufacturers of halogen free cables (eg NHXMH) Some cables strips very easy others you have to use a knife (eg joakari) to strip it.

[@pjvdsandt3293]

Good day Yes in South Africa I'm works only for long time on flat twin and E That is size 1.5 2.5 4mil Setra setra I'm love it also Yes I'm taken my carpet knife cat a piece and then graph the earth wire and puling it the cut the PVC nice cut the PVC Piece of nice Thanks this video is nice Where my mentor explaining all and all I'm follow the instruction thanks

[@seandempsey9396]

Great video guys. As always. I would just strip it the way I always strip they grey FLAT TWIN AND EARTH pair of side cutters and pull the earth conductor along the length. Colleges can't expect a sixteen year kid to strip it any other way. Thank you for another sterling vidio.

[@GSHElectrical]

And thanks for the great comment 👍

[@GSHElectrical]

Hope your watching eFIXX live tomorrow Sean 👍🦾

[@seandempsey9396]

@@GSHElectrical yes I will be I have a look every day I am waiting for the next CPD I HAVE SEVEN SO FAR QIGHT proud of my self

[@AndrewSouthgate.]

Another good informative video 👍, what's the name of the song you played @8.34 ?

[@rajnirvan3336]

Originally the PVC sheath was white on the older cables with red and black wires

[@lukeboy94yo]

Hi guys, I'm pretty certain they do have different current carrying capacities (without getting the regs book out), obviously one is thermoplastic insulation and the other thermosetting. One can go to 70 degrees and the the other 90.

[@jamesmocock4516]

CK automatic strippers are the best for this but do break after a month or two of continuous work.

[@roystonpsciuk6188]

Is it just the outer cover that is safe , what about cables covering inside

[@andrewjames3908]

On LSZH cable are the conductors insulated with LSZH as well or are they standard PVC?

[@wkb9683]

I'm checking out soon.

[@rogerbean393]

Being specified all the time. Can someone recommend a decent cable stripper ,using 4 MM t &e all the time these days.

[@Scottwhatleybates]

Stanley down the centre then use cpc to strip only easy way to do it

[@jondavies450]

Do you have to use the new white cable for 18th edition or can you still use the ordinary gray stuff.

[@GSHElectrical]

Jon Davies Hi John white is low smoke standard wiring systems still use grey PVC cables 👍. Thanks for commenting and watching

[@supersparks9466]

How do you run you knife down the groove when you havnt got a handy flat bench 8 foot up a ladder?

[@GSHElectrical]

Hi, for me I would pull the cpc out and up the cable on site... but sadly this is not a method we can use at college as the cable lengths are often short in length and we run the risk of pulling it out. Thanks for commenting and watching. Gaz

[@supersparks9466]

Ok, keep up the good work and videos

[@Klberts1234]

I would get rid of side cutters and only use pliers in colleges and real life much easier for stripping cables and safer

[@MT_T991]

Have you tried a knipex 98-55 knife for this

[@williammartinculleton7523]

Did you lads get a "drink" from Doncaster Cables 😂 ?