Digitrax Zephyr Express DCC Starter Set Product Review

  Рет қаралды 1,491

Wapato Creek Rail

Wapato Creek Rail

Күн бұрын

Пікірлер: 15
@geoffa3017
@geoffa3017 6 күн бұрын
I wish I could be as excited as you about packing peanuts and a bag.
@007qantas
@007qantas 16 күн бұрын
Thanks for the video. Just ordered this unit to replace my basic hornby analogue controller. Super excited for it to show up. Should be an awesome upgrade for not a bad price.
@isaiahfurrow7414
@isaiahfurrow7414 10 күн бұрын
Good stuff, liked and subbed... keep it up!
@BriansModelTrains
@BriansModelTrains 6 ай бұрын
Interesting video. Keep it up!
@SouthDown
@SouthDown 5 ай бұрын
I was gifted the NCE basic controller and have also used the Digitrax system as a guest. Both ultimately work and run trains. I’m the end I’m not really paying attention to the controller beyond using it to run a train. Nice video! Did you use your KZbin red cup video holder as well? :)
@wapatocreekrail
@wapatocreekrail 5 ай бұрын
Yeah, I doubt there is really any real operational difference between the systems. Part of the reason I got Digitrax is because I was more familiar with it from my research. Unfortunately, the cup did not see action in this video.
@isaiahfurrow7414
@isaiahfurrow7414 10 күн бұрын
Nce stuff is good, and with a wifitrax it can get even better... loving mine so far and hope to add wifi instead of radio to my collection soon.
@phillipg1588
@phillipg1588 2 ай бұрын
I'm currently using the NCE Powercab and it works great, but I feel the Digitrax has more/better options when connecting to PC and with the Digitrax LNWI module, this enables extra train control using phone or iPad via WiThrottle app. I will be purchasing the Digitrax DCS52 Zephyr Express 3amp DCC Starter Set very soon. *** UPDATE *** Got my new Digitrax DCS52 a couple of days back and I must say... I LOVE IT. Extremely very user friendly and with the large screen, very intuitive. Only one small issue when compared to the NCE Powercab... The RECALL button. On the Powercab it's very quick to swap back and forth between loco's at the flick of a button. Just ONE button press. BUT the Digitrax requires 4x separate button presses to swap between recall loco's. Also it's not as good recalling loco's when the loco you currently have control of is still in motion, and here's why.... If you're running a loco forward and you want to recall a loco that is up against a buffer stop and you need to move this loco away in reverse from the buffer stop, then be careful, because the new recalled loco is going to go forward into the buffer at whatever speed the previous loco (prior to the recall) was running at. The NCE Powercab recall function works better because when selecting a new loco from the recall list, Nothing happens until you set direction then dial up the speed. Big points to the Powercab for the way it handles Recalls.
@wapatocreekrail
@wapatocreekrail 2 ай бұрын
I agree, I feel that the Digitrax system is more technologically advanced than the NCE system. Glad you found the video helpful.
@isaiahfurrow7414
@isaiahfurrow7414 10 күн бұрын
Didn't see your comment in time, was going to recommend a WifiTrax panel for your NCE setup, would allow use of 4 wifi throttles, quite simple.... it will be my next step. You're keeping the Power Cab I hope! If Digitrax had their new current throttles out when I bought my stuff I may have went that route, but I got it all together at a show, new, for about $425-450, so I snagged a Power Cab, Cab06, SB5, and a cat5 fascia panel all in one swoop... I will likely get a Digitrax at some point, just because, and also want to try the Wifitrax panel that is a 5A setup with wifi all in a self contained board...
@Karimlovestrains
@Karimlovestrains 3 ай бұрын
Are there any wires that come with that controller? and how do you connect it to bachmann track?
@wapatocreekrail
@wapatocreekrail 3 ай бұрын
There aren’t any wires that come with the system. I connected it to the Bachmann track by cutting the end that usually plugs into the power pack off, pulling the two wires apart, stripping the ends, then attaching them to the screw terminals marked for a programming track. Then you just plug the track plug into the Bachmann track and you’re off and rolling.
@Ozarktrains
@Ozarktrains 6 ай бұрын
The zephyr was introduced about the same time as the power cab if memory serves me right
@wapatocreekrail
@wapatocreekrail 6 ай бұрын
You're right, this version is just a slightly updated version released a few years ago. It has a few upgrades, like soft keys and an improved screen, but it really is probably just the same internally. Thanks for the comment, hope you enjoyed the video!
@everettthepetractionguy4222
@everettthepetractionguy4222 Ай бұрын
I think I'll get me one. 🤔
DCC Basics with Digitrax
17:39
Kingsview Model Railway - My NSWGR Model Railway
Рет қаралды 1 М.
Digitrax Zephyr Express 3.0 Amp Starter Set ZEPE With James Wright!
17:43
Wait for it 😂
00:19
ILYA BORZOV
Рет қаралды 7 МЛН
World’s strongest WOMAN vs regular GIRLS
00:56
A4
Рет қаралды 5 МЛН
the balloon deflated while it was flying #tiktok
00:19
Анастасия Тарасова
Рет қаралды 34 МЛН
C&S #9 on a mixed train
8:52
Jim Brookes-On3 D&RGW Narrow Gauge
Рет қаралды 799
Digitrax Evolution Express Dcc System Unboxing
24:28
Go/Via/orgohome
Рет қаралды 5 М.
How does DCC Work and how do I wire my Model Railroad for it?
15:09
DIY and Digital Railroad
Рет қаралды 160 М.
The Best DCC Train Controller | NCE Power Cab | Unboxing & Review
23:58
31 - Expanding a Digitrax DCC system with a PS-2012E, DB220, and PM74s
46:02
Great Northern Cascade Division in N scale
Рет қаралды 4,4 М.
Digitrax Zephyr Express DCC controller #69
10:14
Richmond model railway
Рет қаралды 4,8 М.
Wait for it 😂
00:19
ILYA BORZOV
Рет қаралды 7 МЛН