2007-2011 Toyota Camry LED Installation

[@erhendrix]

After finding this video I decided to order these lights for my 2010 Camry XLE. The video was a huge help and made the process very easy. I went with these same LED boards instead of a small LED bulb. The only negative thing I will say is that the quality of the product is questionable. The LED board comes with two wires coming out of it and you use an included adapter depending on the type of installation you need. The wires coming from the LED board are MUCH thinner than the wires coming out of the adapter. Because the wires are so thin and delicate, 3 of my 4 lights wound up having wires break out of the plastic connector that joins the board to the adapter. I emailed customer service and they offered to take care of it, but I just wound up splicing the wires together to make them work. The lights look great, much better than I was expecting to be honest, but the quality of the LED boards isn't very good.

[@diodedynamics]

Eric Hendrix, sorry to hear you have been having issues with your LED board. If you have any other issues with this board, just let us know and we would be happy to get you taken care of. Thanks for the business!

[@vijaycy1]

Awesome video. Very helpful for DIY. Saves money and time for go to the dealer. Lots of thanks for your hard work. I spent only 14 dollars to replace everything with LEDs. What a bargain!!

[@taz24787]

Thanks for the upload! ... But remember, for the door panes light covers, you wanna remove them pushing the clip from the right side (driver's door) with a flat screwdriver.

[@diodedynamics]

Thank you for the helpful feedback!

[@GhostNinjaTactical]

Great instructional video bro! Just did mine a few mins ago. Took about 10 min total!!!

[@brian.daniel]

Great video!! I have a 2009 Camry SE and now I know exactly how to install these. Thank you so much! I'll be ordering my kit today.

[@diodedynamics]

Thanks for the business!

[@brian.daniel]

Ok dumb question, I have a 2009 Camry and your website says 2010-2011. Will these lights fit my 2009? Toyota didn't change anything did they? I'm just trying to make sure I get what fits the first time. Thanks!

[@diodedynamics]

Brian Baacke not a problem! Since your Toyota is a 2009 it will in fact fit in that range of vehicles. If you have any other questions don't hesitate to ask. Thanks!

[@brian.daniel]

Ok thank you!

[@earlcelery1501]

Wow..technology makes everything easier. Good video and really help us a lot. Thank you so much. Now I will start ordering my led light bulbs. God bless!

[@diodedynamics]

Earl, thanks for the business! If you have any questions don't hesitate to let us know!

[@mohammadrahman4707]

Thanks for this video which is pretty helpful, was wondering if you got any video on how to install globe in the glove box for same model car? thanks

[@Tefergamertv]

Excellent video, just what I need. Thanks bro

[@diodedynamics]

We're glad to help!

[@AZUCARAMARG0]

Thank you for your video.

[@diodedynamics]

You're welcome!

[@mauwheels1]

Thank you for the very helpful information, really helped.

[@diodedynamics]

Thank you for the feedback! We're glad to hear it!

[@dritan4728]

Where I can find stage three light LED light like those who are installing in the car they selling somewhere today

[@diodedynamics]

Head on over to our website at www.diodedynamics.com and plug in your make and model, it will tell you all of the options we have available there! :)

[@KeithsTVHD1]

i did my 15 camry door lights to led, nice!

[@diodedynamics]

+kruff39, thanks for the support!

[@Brandon-21MN]

Can I get a link or something for the full set for 2007 camry le with the board led ones without the license plate ones

[@diodedynamics]

These are for the dome lights specifically: www.diodedynamics.com/dome-light-leds-for-2007-2011-toyota-camry-one.html This link will take you to all the lighting options we have for your Camry: www.diodedynamics.com/by-vehicle.html?find=2007-toyota-camry-454867&sid=vqDOE3ccDi

[@diodedynamics]

Sohayl Samim the process is not hard at all! We have a universal footwell kit that fits for any application. Attached below I have both a link to the product on our website, and a link to an installation video for the footwell kit. Hope that helps! If you have any other questions don't hesitate to ask. Thanks! www.diodedynamics.com/store/led-bulbs-1/led-strip-accent-kits/footwell-kits.html How to Install Fiat 500 Footwell LEDs

[@albertkim7255]

i noticed the website sells the interior led light kit for mostly the 2010-2011. are you using those 2010-2011 lights in this video? will the 2010-2011 be compatible with a 2007 camry? thank you in advance

[@hgaubaul]

Thanks for the upload. Very helpful.

[@sohaylsamim8325]

Would it be a hard process to put LEDs on the footwells?

[@purelove6121]

Nice information video 👍👍👍

[@diodedynamics]

Thanks for the support!

[@JaimeTorresNilo]

Excelente aportación gracias

[@bountyhunter_BDPaku]

brilliant mate!

[@diodedynamics]

Thank you!

[@imoral2348]

Thanks for the information very well done

[@ahaddjalal5157]

Hey Paul I had request about leds on Camry. Can you please show how to plug in halo headlight of camry 2005? I would really appreciate it Thanks.

[@jimmyramirez2009]

Do you sell alll those light you installed in a pkg doors interiors plates trunk and etc and maybe even headlights and fog lights maybe a package for 2009 Camry Se

[@diodedynamics]

+JIMMY RAMIREZ Thanks for reaching out! Unfortunately we do not carry a kit with all of those bulbs included for the Camry. Sorry about that! However, you can check out all the bulbs we have to offer, with a variety of brightness options, at the link in the video description above. If you have any questions or would like help making your selection, please feel free to send us an email at [e-mail]!

[@casublegore]

With the lights in the vanity mirror in the camry, when I uncooked the old bulb and put in the LED it was the wrong way so when I tried to take it out to switch it it fell inside into some endless hole and I can't find it anymore, any who no LEDs car working now in the car, does it have something to do with that or is just my battery dying.

[@diodedynamics]

We would recommend checking all of your fuses, as more than likely this is not due to the battery health.

[@williamgiglio3476]

What a great upgrade to the light in my Camry! But does anyone have any info on how to get the map lights to work with the dome light as you open the doors?

[@diodedynamics]

Hey William! We don't know of a way to get that particular function, but we'll be sure to share if we hear anything!

[@HotTvify]

Diode Dynamics Please help. My front reading bulb won't pop out. How do you do it? the Bulb is loosing a little but wont poping out. Is there a technique can remove that metal piece?

[@diodedynamics]

Chao Hang Lu, for many interior lights, it is helpful to use a small screwdriver tool to help assist with bulb removal. Avoid being too aggressive with the tool, as sometimes that might cause a fuse to blow. If you still need assistance, please give us a call at the office at [phone] and we would be happy to help you out. Thanks!

[@casublegore]

Also how do you have like a stage 3 kit or something? I don't have any idea on how to buy all the stage 3 LEDs from your website.

[@diodedynamics]

Hello! We do not currently offer "staged" kits on our website, however we do offer a variety of different brightness levels. Feel free to head on over to our website to check out all of the options we offer, however if you have any other questions or concerns, please send us an email at [e-mail] - thanks!

[@alonzogonzalez5913]

the lights in my backseat are different, they look like 2 small circle air vents on top, with 2 buttons to press on, any idea on how to change those??

[@diodedynamics]

Hi there! You should be able to find that info in your owners manual. However, you can always shoot us some images to [e-mail], and we can help!

[@ZleuXkj]

So every bulg is the same except for the one used for the dome light right?

[@diodedynamics]

That's correct! You can find all them at the link below. www.diodedynamics.com/by-vehicle.html?find=2011-toyota-camry-319733&sid=SeFZpIa0vB

[@PHAROAHMIDNITE]

Thanks for uploading!!!1

[@Yorenzo27]

On the website it says, 2010-2011/2016 Camry, Do these work for 2007 Camry LE?

[@jonathandavis3312]

I have an 07 LE and the bulb size he put in the map lights worked for all my lights. Every single one. They're all the flat tab kind. Mine doesn't have the traditional dome light. I guess because of the sunroof.

[@lightmeupsigns5363]

excellent

[@foyez2441]

Hi do u know the size of the day time running lights? I have a 2010 camry se and I would like to switch the stock bulbs to leds..thanks you

[@SengL6767]

hello there Diode dynamics, what happened after u put the led in the dome,map N door light and the fuse keep Blowing off , 7.5 amp ,should i update to 10 amp ?? any help

[@diodedynamics]

SENG LOU, if you could shoot us an email at [e-mail], we would be happy to help you out with the interior lights on your Camry!

[@rithyieng9089]

I got a 2008 Camry LE ur car looks exactally like mine. Ive tried turning housing unit clockwise so it can come out so I can replace bulb with LED n its not coming loose man. For both units n both are like tight n wnt come off. Ive tried clockwise n counter clockwise. What can i do? I feel like if i twist it so hard that i can break it…. help!!! Pls

[@JinC1998]

dont be afraid, Mine didnt come out at first, and i ask my dealership to do it, the mechanic simply applied more force, and it came out

[@CGphotoOp]

Are the bulbs the same on a 2013 Camry SE?

[@dani33555]

I have a 2011 toyota camry. my lights won't turn on when i open my car doors. any recommendations?

[@P76-f9w]

do you have the dome light setting on “door”?

[@maljisaipuram9910]

i accidentally pushed the right map light switch button and it got pushed into the open space dome assembly. Now the switch is lost and my RIGHT panel MAP light is out...any help to replace with a new switch

[@diodedynamics]

We're sorry to hear that. Unfortunately, we're not sure where you can purchase the factory switch. We would recommend checking your local Toyota parts department.

[@maksymhorobets8838]

Awsome! Thanks man!

[@lifehackertips]

Convertibles did not have that center dome light 0:30 they had two directional lights in the back similar to lights above airplane passenger seats. Any idea how to replace those?

[@diodedynamics]

+lifehackertips Thanks for the tip! Please do not hesitate to send us a photo of the factory bulb uninstalled to [e-mail], and we can help you out!

[@DanielGarcia-kq9it]

I’m trying to change all my interior lights on my 2007 Camry, are all the lights excluding the dome light, the same?

[@diodedynamics]

Hi Daniel! Please go ahead and give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team will be happy to help with that!

[@reasonablyreasonable347]

2011 luxury Camry hybrid has different h7 adapter. Please do a video on that !

[@diodedynamics]

Thanks for the suggestion! If we hear anything from our media team about a video like that, we'll be sure to share!

[@redmori]

Thank you for the video

[@A_guan]

I only see dome lights and license plate lights. I'm assuming I can use dome lights for the map, door, overhead and trunk?

[@diodedynamics]

+Tech Defender What vehicle were you interested in these bulbs for?

[@A_guan]

Diode Dynamics I saw a typo in my comment. I've updated it haha. When I go and look for the bulbs for the camry the only bulbs I see for the interior are dome lights and license plate lights. I don't see anything for door, map, or trunk led bulbs

[@diodedynamics]

+Tech Defender We would be happy to help you find the bulbs you need! What year is your Camry?

[@kHoPhAe]

I might have missed it but my 2011 Camry SE has 2 circular dome lights and 1 is out, how do I change that?

[@diodedynamics]

twesam, if you could shoot us an email at [e-mail] with a couple pictures, we would be more than happy to help you out. Thanks!

[@orksophal3301]

Sorry Sir,Not dangerous if we do not remove the batteries?

[@diodedynamics]

+ork sophal We do recommend disconnecting the battery for this installation. If you have any further questions, feel free to contact us!

[@orksophal3301]

Ok thank you

[@Jordan-CODM]

In the door is better led with the logo, look nice.

[@diodedynamics]

Thank you!

[@lj7843]

What light did you use for the map lights? I can’t find them on your website

[@diodedynamics]

Here you go! www.diodedynamics.com/map-light-leds-for-2010-2018-toyota-camry-pair.html

[@lj7843]

@@diodedynamics thank you! I was also looking for lights I could use for my door light

[@diodedynamics]

@@lj7843 Do you know what size they are?

[@mohsensumbal3671]

Should the car be on or off? Thank you!

[@diodedynamics]

For safety purposes, it's always a good idea to mess with electronics while the vehicle is off.

[@P76-f9w]

Where is stage 3 for the map lights on your website? can’t seem to find it

[@diodedynamics]

Unfortunately, we no longer offer map lights for the 07-09. However we do offer them for the 2010 and 2011. So, If your model is a 2010-11, you can find them here: www.diodedynamics.com/by-vehicle.html?find=2011-toyota-camry-319733&sid=W3oRbwDGPs

[@David-ni2yx]

On the map lights there is a cover I want with 3 lines I want to know what is that for?

[@diodedynamics]

Hey David! That would be our SMD12 LED board. www.diodedynamics.com/led-board-smd12-one.html

[@untarnishedthought9229]

Thanks. I need the trunk stage 3, door stage 3, dome light stage 1/2, map lights stage 1/2, license plate lights. I have a 2009 Camry Hybrid.

[@diodedynamics]

+Untarnished Thought Here are the bulb sizes that should be compatible with your Camry! If you have any further questions, please don't hesitate to contact us! Trunk, Door, Map and License Plate Light LEDs: www.diodedynamics.com/store/led-bulbs-1/listed-by-size/194.html Dome Light LEDs: www.diodedynamics.com/store/led-bulbs-1/listed-by-size/31mm-festoon.html

[@lipeneves92]

I did it, but after I installed the passenger door light all of the others stopped work incluiding the clock also the check engine is on, whay can I do?

[@diodedynamics]

+Felipe Neves, please shoot us an email at [e-mail] and we would be happy to go through some troubleshooting with you!

[@royrogers983]

Ebay has a Camry LED kit with every LED bulb you need to convert your Camry for about 15$. Thanks.

[@diodedynamics]

+Roy Rogers, we may not be the cheapest option on the market, but we take the time to design and fully test all of our LED bulbs here at our facility to ensure long-term reliability and performance. We also stand by our products with a 3-year limited warranty and 100% satisfaction guarantee!

[@kazakbalasy]

Hi! I'd like to order. How much is for everything? Also, what about the DRL Lights? Do u have something for DRL?

[@gustavomejia2029]

Do your Have pics or vid clip of07 camry tail lights leds?.

[@diodedynamics]

+Gustavo Mejia, unfortunately we do not have any photos directly on that specific vehicle, however we do have a collage (see link below) of our tail light LED options on a 2015 Chevy Colorado (these are the exact same bulbs). If you have any questions please let us know - thanks for your interest in Diode Dynamics! diodedynamics.com/images/chevy/colorado/2015/tail_led/Tail%20Light%20LED%20Collage.jpg

[@matheusmarques2640]

How can I change a steering wheel for another type?

[@akshitmehta9777]

Can you please make a video on 2004 Toyota Avalon led lights like you made on this one

[@diodedynamics]

+Akshit Mehta Next time we have an Avalon into our garage we will be sure to shoot more videos! In the meantime, if you have any questions about installation, please don't hesitate to contact us!

[@akshitmehta9777]

Can you please recommend me third lights for my 2004 Toyota Avalon xls and 2005 Cadillac SRX v6

[@unhachlaem5402]

Do you have LEDs for the 2012 camry?

[@diodedynamics]

Absolutely! Attached below I have a link to many of our Camry offerings. If you have any questions or don't see something you were interested in, shoot us an email at [e-mail] and we would be happy to help you out. Thanks! www.diodedynamics.com/store/led-bulbs-1/listed-by-vehicle/toyota/camry.html

[@lashaarveladze8001]

Hi all, can u pls advice how i can change the rare 3rd brake light on camry 2007.thx

[@diodedynamics]

+lasha lasha Next time we have a Camry into our garage we will be sure to shoot more videos!

[@michaelwallace4944]

I have 2 swivel lights above back seats. Any clue on those

[@diodedynamics]

Can you tell if they are LED or halogen?

[@michaelwallace4944]

@@diodedynamics they are/were regular. But I found out how to change them and now they are LED

[@michaelwallace4944]

@@diodedynamics thanks

[@diodedynamics]

The price depends on the brightness you'd like- you can find everything for your vehicle by clicking the link in description. Thanks!

[@untarnishedthought9229]

I dont see these on your website! Please advise.

[@diodedynamics]

+Untarnished Thought Sorry about that! We'd be happy to help you find the bulbs you need for your Camry. Which locations were you interested in?

[@Kressa1111]

Thanks!

[@patriccalderon5853]

Where can i get the same led light you have ?

[@diodedynamics]

We have included a link below to all of our Camry LED options! :) www.diodedynamics.com/by-vehicle.html?find=2008-toyota-camry-319730&sid=TylnbofeLn

[@TonyOnlineEnglish]

what about the back seat reading lights?? thanks

[@diodedynamics]

You can find all of the interior bulbs we offer for the 07-10 Camry at this link: www.diodedynamics.com/by-vehicle.html?find=2010-toyota-camry-319732&sid=EurxCoKEgw

[@paradisehd4295]

What color are these ? Cool white 6000k?

[@diodedynamics]

+Paradise HD Yes! In this video, we installed 6000K (Cool White) LEDs.

[@paradisehd4295]

Diode Dynamics will purchase all 4 ! Thanks

[@ronalduzcategui1818]

let's break dad car kids ;) nice vid

[@Allen1350]

... what about the glovebox light?

[@diodedynamics]

Hey there! We do have LED upgrades available for the glovebox light as well, for certain model years. You can see what we have available for your Camry through our Vehicle Finder tool! Here is the link: www.diodedynamics.com/by-vehicle.html

[@jyounotme]

Is the bulb size for dome light the same for models equipped with sunroofs?

[@diodedynamics]

Marty, the dome light should be the exact same for both models. Good question!

[@Allen1350]

Not the same! Trust me! All interior bulbs including vanity mirrors, eyeball lights in the back seat, map lights, center console light, etc., are ALL BULB 194. I learned this one. 👍 I have an '08 hybrid model so I am quite familiar... 🤔

[@DorrellDaChamp]

What about the glove compartment?

[@diodedynamics]

Hi Dorrell! We do offer glove box LEDs for the 10-11 Camry (below). However, we do not offer them for the 07-09. www.diodedynamics.com/glove-box-leds-for-2010-2011-toyota-camry.html

[@Berger-Leki]

Show us diode Installation on NEW CAMRY - 2012 - 2015

[@diodedynamics]

Jacob, thanks for the suggestion! Keep an eye on our page, because we normally get a new car for R&D nearly every week. Thanks!

[@RSchannel777]

It's going to snap right in, uh uh, yeah right in, uh huh...

[@mikeoze]

What about the side marker lights

[@FortGroupMusicaOfficial]

Glove box ?

[@diodedynamics]

We do not currently offer a bulb meant for the glove box at this time, however, if you know the bulb size, we may offer the bulbs on our website! Here is the link to all of our bulbs: www.diodedynamics.com/products/led-bulbs/interior-and-license.html

[@junglerzzz]

All lights must be original

[@farhanad1]

from where we can buy these led's

[@diodedynamics]

+farhan ahmed Thanks for reaching out! Check out the link below to see all the LED bulbs we offer for the Camry. www.diodedynamics.com/store/listed-by-vehicle/toyota/camry.html

[@ecymbura31]

Always do this wearing gloves guys you never wanna touch any bulb with your bare hands!

[@diodedynamics]

With LED lights, it is actually not necessary for you to do this. With standard halogen bulbs that is certainly the case, but not LEDs!

[@ecymbura31]

@@diodedynamics you're still getting oils on the diodes though so wearing gloves is best

[@diodedynamics]

@@ecymbura31, it certainly can't hurt, but it is not completely necessary like it is with halogen style bulbs!

[@ecymbura31]

@@diodedynamics right

[@zahi8778]

How to replace automatic gear shift lever bulb toyota camry 2013

[@diodedynamics]

+Zahi Unfortunately, we do not offer any gear shift lever bulbs at this time. Sorry about that!

[@damerc9055]

Diode Dynamics

[@pas52370]

what about glove box ligth

[@pas52370]

you forgot to change the glove compartment light

[@lifehackertips]

2:07 you didn't replace the bulb between the map lights

[@diodedynamics]

+lifehackertips If you are able to access and uninstall this bulb, please email us a photo to [e-mail], and we can help you find what you'll need!

[@marwenjaffali5806]

what about 2016 model ??

[@diodedynamics]

Marwen Jaffali, we have new cars in every week for testing of our products! Please shoot us an email at [e-mail] and we would be happy to look up compatibility!

[@ZeroDriveFadi]

How to change glove box lights

[@diodedynamics]

Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team would be happy to help you with that.

[@gusttavoo]

what about turn signals?

[@diodedynamics]

Gustavo Labra, attached below I have links to the front/rear turn signal bulb listings for the Camry, as well as a plug and play flasher module that will be needed as well to prevent what is known as hyperblinking. Bulb installation is simply a plug and play replacement for your factory bulb. If you have any other questions about our products or installation, please shoot us an email at [e-mail] and we would be more than happy to help you out. Thanks! www.diodedynamics.com/store/led-bulbs/listed-by-vehicle/toyota/camry/2002-2011-toyota-camry-led-turn-signal-flasher www.diodedynamics.com/store/led-bulbs-1/listed-by-vehicle/toyota/camry.html?application=210 www.diodedynamics.com/store/led-bulbs-1/listed-by-vehicle/toyota/camry.html?application=209

[@itcomesinwavves]

Bulb sizes?

[@diodedynamics]

Hey Ryan! You can find them all here: www.diodedynamics.com/by-vehicle.html?find=2011-toyota-camry-421026&sid=A4qy6L6XTV

[@upturnedtunic6165]

What about the glove box

[@diodedynamics]

While we do not have a glove box video, we do offer a number of different replacements as long as it is a removable bulb. Feel free to shoot us an email with some photos of the bulb removed from the vehicle, and we would be happy to cross reference that for you!

[@uawsux]

I didn't see the glove box

[@diodedynamics]

The glove box install will be very similar, as just pop off the lens and pull out the small 74 size bulb and replace it with your Diode Dynamics LED and you are good to go!

[@tolatemo316]

door lights for my camry wireless

[@adeeljavaid3781]

break light LED i want to replace break light LED only

[@diodedynamics]

+Adeel Javaid Next time we have a Camry in our studio we will be sure to shoot more videos!

[@adeeljavaid3781]

Diode Dynamics waiting for that video

[@valerchk]

а где ссылка на лампы??

[@diodedynamics]

Here you go! www.diodedynamics.com/by-vehicle.html?find=2011-toyota-camry-319733&sid=I7pSgGFEWG

[@mikeoze]

And indicators

[@derricktaite1916]

Don't put those things in a Toyota it will miss your car up

[@diodedynamics]

Hi Derrick. We're apologize if you had some trouble with your bulbs on your Toyota, however, this is not typical. Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team would be happy to help you with that.

[@mikeoze]

Hello

[@Alan-cf8do]

You miss a spot 🤦‍♂️👎

[@КрасавчикДжо-з7з]

Колхоз

[@5halody]

Amazing job. Thanks a lot

[@David-ni2yx]

On the map lights there is a cover I want with 3 lines I want to know what is that for?

[@diodedynamics]

Hi there! Are you referring to the panel directly under the map lights in the video?

[@David-ni2yx]

Yes the one

[@diodedynamics]

@@David-ni2yx that would be our SMD12 LED board! www.diodedynamics.com/led-board-smd12-one.html

[@richieeats5036]

How do you change the glove department LEDs?

[@diodedynamics]

Rich, depending on your model of Camry, you will have to unhook the hinge and/or take out some screws or bolts to get access behind the glove box assembly. That should give you access to where the bulb is located. Hope that helps! If you have any other questions feel free to contact us at [e-mail] or call 314-205-3033.