Impacter and a 1/2 deep well would improve your time on your dishes dramatically. Just friendly advice. Kudos for taking the time to do it proper. I'm also a ohio Dtv tech.
@jsliva7 жыл бұрын
I have an impact drill for clips but I like the hammer drill better for lag bolts...
@xX_Get_Busy_Xx7 жыл бұрын
Josh Rudnick after I started using an impact i could never go back. Fellow Ohio tech as well
@commandpost17 жыл бұрын
I'm telling them to put monopoles on my install after watching this. I didn't even know what a monopole was, thanks for the vid
@jsliva7 жыл бұрын
No Problem....
@byronsanders71247 жыл бұрын
getring off of a ladder? contractor?
@jsliva7 жыл бұрын
Retailer..... I used to do HSP work... but it sucked.. Sometimes you have to get off the ladder..
@newtonraymond777 жыл бұрын
Joe S I know what you mean. Some HSP wants all dishes relocated which isn't always an option so you have to get off the ladder when necessary long as you're safe doing it
@mypeepeegowee7 жыл бұрын
But ur long monopole drilling into living space!! That's gonna have a chance for a leak!!
@jsliva7 жыл бұрын
Um no, It's in a stud and that's what the tape is for.
@lonewolf53164 жыл бұрын
so do contractors get in trouble to if they do a shit job??? iv'e seen slimlines out here without the little legs attached to em at all
@bigstuntnsp2 жыл бұрын
I got an interview with directv coming up. Any advice?
@jeramywillison5 жыл бұрын
That long mono pole should be above the bend not below
@itstheACE5627 жыл бұрын
I've been doing this for a while & i still pre drill, this keeps the wood underneath from splitting...
@wiseoleowl51543 жыл бұрын
What do you do when the home owner doesn’t want any hole drilled into the roof?
@cadaudioguitars28983 жыл бұрын
You could shoot for the fascia board, direct to wall with the mount u saw in this video, or an under eaved mount
@EggheadJr12 жыл бұрын
Put it on a pole on the ground.
@newtonraymond777 жыл бұрын
long monopole should've been placed above the bend of the universal mast
@jsliva7 жыл бұрын
It doesn't have to be.. Putting the monopoles together strengthen the mount..... It's physics 101
@ituberich7 жыл бұрын
newton raymond. You're right. This guy whose been doing it for a long time thinks he is so smart. Just another sub/retailer doing it wrong.
@jsliva7 жыл бұрын
It's funny , because I don't get call backs for service calls because the dish needs realigned..
@loggingdaddy7 жыл бұрын
Incorrect use of bishops tape as well. It is required to cover all surface of foot plate.
@jsliva6 жыл бұрын
No it's not... It's meant to cover the entry points..... The purpose of billings tape is so when you drill through it with your lag bolt it pulls the tape in with it to seal the screw grooves and the top of the lag bolt head....
@ogtrey4k5 жыл бұрын
Nice, video I’m considering on pursuing this as a career.
@trinitylea37553 жыл бұрын
You make me want to be an installer!
@ReapWhatYouSowGardening Жыл бұрын
Yep 6 years ago when I was 7 years old we had a dish network dish in our backyard and I tinkered with it I always thought I would become a dish or directv tech but now I'm a farmer.
@newtonraymond777 жыл бұрын
nice work
@ang90417 жыл бұрын
Couldn’t you have just used a low pro mount .. ?🤦🏽♂️
@jsliva7 жыл бұрын
Yeah, but not at that spot... The corner of the roof had a non pen... Low profiles work best at the corners
@brandonorozco83585 жыл бұрын
Might not have had one in him. Stubbys are God's gift tho
@1catman1325 жыл бұрын
I tried getting DTV, they lazy guy came and said "there's a tree in the way" . When I measured, The tree wasn't even in the way. And he could of put it on the right side of my roof. (Maybe since my cat was on the roof he was to scared)
@gabrieldrumheller31852 жыл бұрын
You almost definitely don't know what you're talking about. Most DTV installers are paid per job so typically they will instal any way they can. How did you supposedly measure this yourself?
@M0BX.L7 жыл бұрын
stubie impact drill
@jsliva7 жыл бұрын
stubby mount is ok but alot of the roofs on these mobile homes just aren't solid enough for the stubby
@byronsanders71247 жыл бұрын
yeah the universals are best for these kinda buildings.
@brandonorozco83585 жыл бұрын
@@byronsanders7124 except with a Universal you gotta use monopoles and the large one was drilled over a living space. Stubby would have been perfect.
@byronsanders71247 жыл бұрын
thats improper monopole placement long one too short
@jsliva7 жыл бұрын
No it's not, I've been doing this for a real long time... There is a reason why they are adjustable Byron....
@jbeach94027 жыл бұрын
Why didn't you place the long mp further up on the neck of the mast? Wouldn't that be better to provide more stability when winds start to pick up?
@jsliva7 жыл бұрын
because the mount is stronger when the the 2 monopoles are secured closer together on the pipe .. simple physics.
@ituberich7 жыл бұрын
Lol. Guys. He's been doing this for a real long time. Listen to him. Nope. It's wrong no matter what you say. I don't care about your "physics"
@jsliva7 жыл бұрын
It's not wrong.... learn how to install before you call others out on it...
@appsstore23647 жыл бұрын
i technical of DirecTV in Chile.
@christophersimmonds13816 жыл бұрын
"I know you're supposed to predrill these holes, but when you've been doing this as long as I have....etc..." "For some reason, these guys don't like doing it the right way..." Seems legit.
@jsliva6 жыл бұрын
It is if you know what you're doing......
@ProudWhiteBoy4 жыл бұрын
Why mount it on the peak of the roof ?
@opa60334 жыл бұрын
Because it is closer to the satellite in the sky.
@ProudWhiteBoy4 жыл бұрын
@@opa6033 the satellite is thousands of miles away 😂 it won't help
@opa60334 жыл бұрын
@@ProudWhiteBoy 23400 +_.... Been doing satellites since 93 and never could understand why anyone would mount at the peak instead of the lowest corner
@jimmadjy4 жыл бұрын
get an impact drill bro, much easier,
@alfonsosoto57776 жыл бұрын
Why did you use a a standard mount 😂😂 get s stubby Mount
@alfonsosoto57776 жыл бұрын
Wrong way to install Thoes mono poles
@brandonjaymacaraeg19125 жыл бұрын
Where are your gloves? PPE is a must 😂😂😂
@travis85924 жыл бұрын
KEEP DRILLING HOLES INTO ROOFS, AS SOMEONE WHO OWNS A ROOFING COMPANY, I CAN'T THANK YOU GUYS ENOUGH. I GET AT LEAST 50 CALLS A YEAR ON SOMEONE WITH A LEAKING ROOF, THAT HAD JUST RECENTLY HAD A DISH INSTALLED LOL. Lag it into the fascia board or use a self standing mount. That tape you guys use doesn't do a thing.
@Ivan_o18Vlogz3 жыл бұрын
Well at least you have a job 💪
@gabrieldrumheller31852 жыл бұрын
Roofers and us satellite installers never get along. We put holes in the roof (adequately used bishops tape does seal it because we'd get way more returns if it didn't. People call us first, not the roofing company). I've seen plenty of jobs it wasn't used, though, which will leak. Thank you guys for putting the dish up wrong or throwing them off the roof to give us more service calls.
@Drew-ql3gq Жыл бұрын
It should not be i On roof
@cowboy0090stang16 жыл бұрын
I see so many problems with the way this guys is doing his job 1) way too close to the edge of the roof 2) he’s on the roof dtv rules state you cannot get on top of the roof the highest on the roof is 4 rows of shingle up only you cant get off your ladder 3) he’s at the peak of the roof smdh
@jsliva5 жыл бұрын
Directv rules LOL
@jonathanpuga83485 жыл бұрын
Never mount anything on roof, mount to a pole or use under eave mount.
@Ivan_o18Vlogz3 жыл бұрын
No prick
@gabrieldrumheller31852 жыл бұрын
What are you talking about? Roof installs are the most popular. You do not know now what you are talking about.