Dirt Bike Chain and Sprocket Removal and Installation 4K - Episode 106

[@grimm8429]

You would be a dream for someone buying a bike from you. you take such good care of your bike its awesome.

[@DirtBikeChannel]

+Darth Sadis I have one for sale :) It's a YZ450F.

[@grimm8429]

+Dirt Bike Channel I'm sure who ever buys it will be very happy. far too often you find bikes in the worst way and the seller's put a price on it as if it's New. both the bikes I purchased had to have extensive repairs shortly after because of stuff the failed to disclose (I too should of been more careful and I have learnt my lesson)

[@solarxsniper269]

+Dirt Bike Channel Your selling your 450?

[@calebnewton4347]

+Solar XSniper already?

[@DirtBikeChannel]

+Solar XSniper Yes, I've had it for 7 months. I wasn't even planning on keeping it this long. It was for testing purposes only.

[@ramanm5705]

Tech tip: put your old chain over the rear sprocket when you take off the bolts. If the wrench slips it wont hurt as much.

[@JayGee6996]

Or use a longer wrench, or start with your hand already beyond the sprocket. I cringed watching this, mainly because I've removed part of my knuckles in the past and it ain't nice!

[@brandonquenneville7330]

Kyle gives us the right ways to do things with options. This man is humble Because he rides like Johnny Walker

[@DirtBikeChannel]

+Brandon Quenneville Thanks for your support Brandon. I am not worth of Johnny Walker's shadow, but thanks for the compliment.

[@marklee7759]

Really appreciate the narration over the video. SO much better than using a live mike while doing the work. I'm sure it takes you that much more time to edit but the difference between that most of what you see on youtube is amazing.

[@DirtBikeChannel]

+Mark Lee Thanks for noticing Mark. In the case of this video, it made things easier since I didn't have to explain what I was doing while actually doing it.

[@Teamgsn]

Can't say enough good things about this channel.Great mix of informative,instructional and entertaining content.Has really helped me navigate all the pitfalls of being a newer,less experienced bike owner.really appreciated!

[@DirtBikeChannel]

+Genesis Sports Nutrition Thanks for your support. Some days notes like this one are the only thing keeping me going. I certainly don't break even financially on this stuff, and that is to say nothing about my time.

[@sean.g4516]

@@DirtBikeChannel link for the chain

[@Tklatti01]

just a friendly FYI. When removing rear sprocket if you loosen rear nuts first verses the Allen side(just use Allen to hold it still) it will be easier and less chance of stripping out the Allen side. Good vid!

[@DirtBikeChannel]

+Tklatti01 These are Torx bolts, but I think it would the same from either side. Whether you are holding it from moving, or trying to turn it, the force is the same on that head... Just a thought.

[@Tklatti01]

+Dirt Bike Channel I thought so also. but it's clearly easier loosing the nut side first. weird...lol

[@DirtBikeChannel]

+Tklatti01 I'll give it a try next time.

[@JayGee6996]

It's significantly easier loosening the nut assuming you have the same length spanner/ratchet, sometimes I would have a spanner on the back and try to turn both at the same time

[@21chicko]

I find it easier and safer to crack the nuts with the wheel and chain still on the bike.

[@aridinglifestyle4142]

You should do a video on repacking the exhaust. I think it's one of the most overlooked things. Especially on these two strokes that get really oily. It actually has a pretty large performance impact on the bike too.

[@dirtbikesam]

+ARidingLifestyle Yeah we should. I just repacked a FMF silencer but didn't film it. Thanks for the suggestion.

[@DirtBikeChannel]

+Dirtbike Channel Sam Sam, don't do anything on your bike without filming it :)

[@kings17court]

You don't have to be an official mechanic to tackle projects like this. It feels really gratifying to be able to successfully pull off projects like this.

[@lukefish7562]

About to try all this for the first time. 🙏🏽

[@kings17court]

@@lukefish7562 You've got this. Just follow the video, use common sense, and don't rush. It will feel great when the job is done.

[@lukefish7562]

Hey I appreciate the encouragement! I definitely understand and welcome the feeling of accomplishment. Between this and my first tire change coming this weekend I’ll either be super pumped up or in a insane asylum. I did get one of the Moose tire changers so hope that aids a lot! Thanks again!

[@kings17court]

@@lukefish7562 The tire change is more of a challenge, but do-able also. If anything will put you in the asylum, it will be the tire change. Make sure and have true tire irons, more than 2 if possible. The biggest tip I could give you is that when you get to the final bit of tire to get over into the rim, pinch the tire together on the opposite end, forcing the beads together, and sinking the beads into the deepest well of the rim. That gives you the little bit of extra clearance to work the final bit of tire under the rim. And during this final stage, it's important to take "small bites" with the tire irons. Watch a few videos in preparation, and you'll be fine.

[@lukefish7562]

@@kings17court well dang I’m glad I “bumped” into you. I’m very hesitant with the tire as I’ve read the horror stories in the comments in the videos I’ve watched. It’s raining here all day tomorrow so I was hoping with no rush to ride I’ll be able to take my time and take breaks when frustrated. I sincerely appreciate the tips because I need all the help I can get. We shall see! Have a great weekend!

[@takl23]

I found your channel the other day and love it. The production quality and your presentation skills are top notch. Well done!

[@bambertron1307]

Beautiful bike, beautiful workshop, beautiful video... thanks man

[@NukaMoto]

I just put a Tsubaki chain on my KTM and i had to shorten it a bit.. It took me 3 hours to smash that link out D: Strongest chain/links i have ever seen..

[@michaelbielaski3543]

Also glad to see that you're doing things correctly/well and not just doing "hack" work.

[@dakotanewman4443]

Warning: protect your knuckles when removing your rear sprocket

[@DirtBikeChannel]

+Dakota Newman I happen to like bloody knuckles. Women dig them :)

[@renogardiner9283]

Oh I have some fun scars from that one

[@mixedgasgarage5628]

Best advice I have had in a while

[@carmane2894]

When you are taking the old chain out use the master link to connect it to the new chain and pull it through. It can save a little bit of time and effort

[@DirtBikeChannel]

+Carman Eben Thanks for the tip.

[@chicago23444]

Got to love those channel

[@jonathanoxlade4252]

13.50 ratio is great for that 50/50 acceleration and speed best of both

[@test-nx7mu]

I'd use a slightly longer socket ratchet to loosen the bolts, but most excellent tutorial.

[@rampamtiruri]

Another great vid! U waaay better than those Lucas oil mechanics

[@DirtBikeChannel]

+bibiisbatman bb Thanks man.

[@CougarHunterMC]

Gotta say first chain and sprocket change for me and I don’t understand how some people have to cut the chain and others are just throwing the chain on.. 2006 yz 125 and bought a chain with 120 links . Thought you had to snug up axle blocks at the halfway mark and then roll on chain cut to length and adjust it then done? Am I wrong?

[@pisgah1553]

thanks for that however you dont say where the chain tension adjuster is set at before you can work out the length to have your chain at? much appreciated if.you could help me. thank you

[@michaelbielaski3543]

Good job with some helpful tips. And, vice-grips or channellocks and a set of pliers works, but you're right - a low cost tool that makes it easier is nice.

[@DirtBikeChannel]

:)

[@Maicowerk]

You can also use the motion pro chain alignment tool to determine that your back sprocket and front sprocket line up the chain straight.

[@tmk5522]

Use a large flat head screwdriver and a hammer to remove the master link. Press up up to the open end give it a tap and it usually comes off unharmed, it works well to put new ones on as well. And if you dont have the the press tool, a large pair of channel locks and a small socket work to press the face plate onto the link.

[@dt5974]

Many thanks, great. However. I would have rotated the chain adjustment blocks 180 degrees...

[@hectorrosario5454]

What’s a good website to buy a sprocket kit

[@JohnSmith-it1bz]

Is there a big difference between the 2015 vs 2014 ktm 300 XC-W? Is it worth the money to get the newest model?

[@1695AB]

that press tool, is that supposed to press O-rings only or pins or both O-rings and pins? I'm confused with that grooves on that tool. Thanks

[@weekendwarriortv3950]

Awesome video! Very educational

[@DirtBikeChannel]

+Everything Enduro Thanks man.

[@fabiolourenco921]

+Dirt Bike Channel have been following for a few months .love your video's its so clean and professional .you deserve alot more subscribers.. Keep up the good work ..i have a cr125 ...😉👍👊

[@desertghost3056]

Hey Kyle, great video. I wanted to throw in a couple more tidbits. 1) recheck your chain tension after a while riding as it will stretch. not as much with an x ring as conventional but still worth a quick check. 2) There's a website a friend put me on called gearing commander which is a great resource if your not quite certain of what sprocket combination you need. it's very useful as you can apply different combinations and check estimated RPM in certain gears at certain speeds and vice versa. it is machine specific. Thanks.

[@Maicowerk]

+desertghost Ya, I also always just sit on my bike after tightening the chain. I'll even jump on it to get some travel in and make sure it doesn't tighten up.

[@taylorlonghurst7710]

Hey Kyle, how do you know when the chain is bad? I bought a used bike and the chain seems pretty loose. And yes, the correct slack is set.

[@Cal17]

I do motocross on Saturdays I ride a 2014 kawasaki kx 85 pretty much all stock.

[@gregdavenport3122]

Great Video

[@jasonrondeau6345]

I got about 1500 hours... original chain and sprockets, just got my replacements oh god

[@tommyt9519]

Where do you ride...in a big pool of oil?

[@Cal17]

Love your vids dude keep the awesomeness up

[@DirtBikeChannel]

+Mx gamezzz Will do. I have another video coming out later in the week.

[@HauimauiSlopeking]

you would do easier when you turn the nut instead of the screw when loosing the rearsproket. Same when tighten them up. Thats why the have this cone on the screw-head.

[@DirtBikeChannel]

+HauimauiSlopeking They are counter sunk screws so they don't grab anything like rocks and tree roots.

[@carlosrodriguez-ks1wq]

hey Kyle love your channel really helpful and I have a question I got a cr250 2 stroke and I was wondering what do u think would be a good measurement on chain slack?

[@nvmcrider8475]

when are you going to do a review of the Stilwell suspension? I saw your video of you taking it out of the box but never saw your evaluation.

[@DirtBikeChannel]

+dan smith Email me and I'll give you the skinny - [e-mail]

[@McCheeseKid]

How come dirt bike chains come with the master link clip as opposed to sport bike chains where you have to rivet the pins?

[@MrDopeboys1]

Wyatt C imo because bikes hit like 180 mph and the chain can pop off easier because of the master link.

[@moto5914]

If road racing, you will not pass tech inspection unless it’s riveted. I’m assuming it’s a safety thing due to high speed. Never really asked in the 5 yrs I road raced, just riveted my links and never had a failure. I ran 520 chain and sprockets as well to shed drive weight. I will say that it was not abnormal to go 180 mph on a road course, but only on rare occasion I hit 80 on my 300.

[@SkinnySkinch]

Love your vids Kyle thanks for the content. Dying to hear about this new 250XC TPI. One thing I noticed on the sprocket change I suggest loosening the nut on the bottom of the sprocket while holding the torx bit stationary instead of holding the nut on the bottom stationary and trying to loosen the torx bolt from up top(hoping that made sense). Just my two cents. Lot less force required to loosen the nut from the bottom in my experience.

[@lanceg.8458]

As an aircraft mechanic of 25 years I can say you are correct. Loosen the nut first!

[@robertsilvarprmotoracing9083]

What spray do you use to clean???

[@epigeneticnerd4244]

Do you think it's ok to remove it and putting the same one back on? I recently got a dolly type carrier, which has my front tire off the ground but back tire on the ground. I've read it would be good to take the chain off before towing it. Thoughts?

[@PolskiMotoVlog]

what camera have you used to record this video?

[@DirtBikeChannel]

+Polski MotoVlog This one is the Sony a7Sii with a 24-70 lens.

[@PolskiMotoVlog]

Thx

[@DaleBecker]

Nice video but top tip is for you to turn those spacer bolts around to shorten the wheelbase of the bike. Why do this - by shortening the wheelbase or moving the axle bolt forward your bike will turn better in the tight stuff. You'd have to remove a chain link but that's simple with a chain breaker tool. Keep riding and smiling

[@DirtBikeChannel]

+Dale Becker Then I could give up some stability in the desert. I think I'll keep it the same since I find it's very agile anyway. Cool tip though.

[@DaleBecker]

+Dirt Bike Channel Fair enough - not much desert here in the UK

[@ashtonmanchester3231]

Hey Kyle do u know what website to look on for a stock reed boot for a 2008 yz85

[@331LX]

Should there be any type of play on the front sprocket? I just bought a 2015 200XC-w and had to replace the countershaft seal in it. . The seal kit came with a thicker Snap ring than the factory one and I haven't installed it yet. It seems like there is to much play and the seal is still leaking. Thanks

[@JayGee6996]

In and out play is ok and usually there by design, front to back or up and down etc is not ok and is a sign of a worn bearing.

[@joras18]

Excellent video, man! Question: did the chain you purchased came to that exact length or did you cut/shortened it?

[@jms415]

What type of bike lift/stand is that? Its a nice height... :)

[@DarranB11]

Hi, i have slight play on my front sprocket. Is that normal? It is a 2010 300 xcw.

[@magicferra877]

Thx a lot man for these amazing videos :)

[@DirtBikeChannel]

+Magic Ferra You are welcome.

[@jaynewton87]

hey was just after a bit of advice. i followed ur vidio step by step but when i installed my new front sprocket it had a some lateral movement in it now. also it is clicking now. have you any advice on how to cure this. thankyou

[@aaronbright5028]

Jay Newton front sprockets are called "floating sprockets" so if something is not adjusted it won't break things

[@Pkurkowski2]

best way to press the chain, 8 mil socket and a c clamp. press it on.

[@agrmohamedrabbani3854]

Why all bikes are connected small front gear to rear large gear!?Can u explain

[@JayGee6996]

because you couldn't have a large 50t sprocket on the front, there's not enough room. Remember there are gears adjusting the ratio inside the gearbox so it's not the same as a mountain bike which only has a front and rear sprocket.

[@kkeennyyboii]

I'm trying to change the sprocket and chain but I don't have the right tools does anyone know what tool I need ? I have this cover on my front small sprocket that I can't get off

[@michaelsteven1090]

Is there a certain amount of links that should be used for each bike? I have a new chain that is 118 links and too long on my 2015 350 XCF..Should I make it 117? 116?.Is there a spec from KTM?

[@JayGee6996]

You just make it long enough so that when the chain is tensioned, it sits nicely inside the alignment markings on the swingarm.

[@thespu239]

It sure looked like you used the chain press the wrong way, and that is probably why the chain felt stiff because you pressed on the links Damaging them and the rings. Thanks for the video.

[@Colt1911Shooter]

Why did you switch from the XCW to the XC?

[@ridendrive]

What size chain, how many links came on and did you shorten at all?

[@DirtBikeChannel]

+Fluxx43 520 chain with 116 links. I didn't have to shorten it at all.

[@dazaladz]

You should try one of those "supersprox" rear sprockets, theyre aluminium centre with steel teeth. They last so much longer than those standard ktm ones in my experience

[@DirtBikeChannel]

+dazaladz I've tried a couple of different ones. I have not had any issues with any of them.

[@dazaladz]

+Dirt Bike Channel fair enough.

[@gowengetter4599]

Cool video bro.

[@dalebarron3926]

You should hold the ratchet with hex head to stabalize and use the ring spanner to break otherwise you can stop the hex cap

[@solarxsniper269]

I like the look of that chain. Is there a way to tell when you need a new chain or not?

[@DirtBikeChannel]

+Solar XSniper You need to look at the teeth on the sprocket. When the shape of those teeth start to change, it's time for a new chain/sprocket. You can also look at the o rings on the chain. If they look worn or broken, then It would be a good time to replace.

[@solarxsniper269]

+Dirt Bike Channel okay, thanks I'll keep that in mind when looking at it. Every time I lube my chain I look at the chain and how tight it is to make sure it's not to loose

[@maxmunro4472]

can u out any sprocket on it? or does it have to be made for that bike?

[@JayGee6996]

Rear sprockets are pretty generic, front sprockets need to match the bike so it fits on the splined output shaft.

[@joshz5481]

Just a question were did you buy your chain and sprocket kit off?

[@DirtBikeChannel]

+josh zub www.dirtbikechannel.com/parts/

[@dirtbikesam]

+josh zub We usually get our parts from Rocky Mountain. See the below link www.dirtbikechannel.com/parts/

[@dirtbikesam]

+josh zub www.dirtbikechannel.com/parts/

[@joshz5481]

+Dirt Bike Channel I know that I was just wondering the brand of the chain and sprocket?

[@dirtbikesam]

+josh zub I think he put on Primary drive.

[@Mr10081990]

Why 13 and not 14 tooth?? Thanks

[@brandonquenneville7330]

Just thumb his channel UP. So he can produce more fun

[@alienxyt]

I just bought all the same stuff as you for my YZ250. I have 2 questions though because I couldn't believe how heavy the steel sprockets and chain are. They are all primary drive steel units with the same gold chain as you. Question 1: Am I going to have any fitment issues with the new chain being that it is wider than stock due to the O-rings. Question 2: Am I going to regret putting these new parts on, considering how heavy they feel?? I haven't taken the OEM parts off to weigh them but I can't believe they are going to be as heavy as the new parts. Thanks!!!

[@hudsonpolk9838]

Just an idea, but if you did a video on what the different sprocket sizes and ratios do to your bikes gearing and performance that would be awesome. Its kind of a confusing topic. If you could brake it down for us that would be cool.

[@JayGee6996]

Just think about a mountain bike and you're pretty much there.. bigger front sprocket gives more speed but harder to accelerate, smaller front sprocket gives less top speed but better acceleration. Bigger rear sprocket gives more acceleration and less speed, smaller rear sprocket gives more speed but less acceleration. Front sprockets are usually cheaper and easier to change so people will often change that by 1 tooth as a starting point and then consider changing the rear if you need to change further.

[@aydentoosmoove4028]

Thanks this video helped alot

[@mark3972]

I want to make my dirt bike faster would I put a bigger sprocket or smaller

[@adammckenzie2046]

farmingwithmark smaller for top speed

[@tylernicholson5319]

Faster would be: Larger front sprocket, smaller rear sprocket. You lose torque though.

[@nickcaron3284]

What tool did he use for the snap ring?

[@moto5914]

It appears that he used snap ring pliers...which should be what you use.

[@manuelhacksteiner7560]

this is a quality video

[@DirtBikeChannel]

+firedragon sandy 4K to be exact :)

[@manuelhacksteiner7560]

You're right:)

[@tmac9938]

My local KTM shop said WD-40 is suitable for cheap chain lube, depending on which chain link is in your chain (forget which one he said would work with wd40). What are your guys' opinion? This shop mechanic also races and does desert tracks often and says it's what he uses and has no issues. Thoughts?

[@DirtBikeChannel]

+tmac9938 I haven't tried WD-40 on my chain. I'd be curious to see what others think about it.

[@NukaMoto]

+Dirt Bike Channel There was some video about it where they tested it and they said its good for a primer, not lube. It doesnt hurt the o-rings like many people think

[@tmac9938]

+NukaMoto My guy also mentioned WD-40 doesn't have a lot of fling. But you may be right about it only being useful for a primer. Common sense might suggest WD-40 would be more popular in the moto world if it really did the job as needed.

[@JayGee6996]

The film it leaves behind is minimal so it's generally not recommended, although with O and X ring chains the need for top quality lube is reduced as it is lubed internally. The rollers pretty much stay stationary once on the sprocket which most people don't understand, the lube helps reduce some wear at the point where the roller engages with the first tooth and also prevents rust. The most important thing is keeping the chain clean because dirt on the outside of the rollers is like a grinding paste on the sprockets and rollers which is the primary cause of wear. Also, chains don't stretch, the rollers wear internally which increases the internal diameter which makes the chain become longer when under tension. You want to find a lube that dirt doesn't stick to but is also still present once you have finished a typical ride. Personally I think WD40 is more suited to cleaning the chain but if you change your chain super regularly then you don't need to worry about wear rates anyway.

[@56redjets]

I ride KX500 in the desert. I dont use chain lube. I use o ring chains and twin ring rear sprocket. I have found lube only attracts dirt and makes a grinding paste that makes chains and sprockets wear faster. Been doing this for 35 years. Chains and sprockets last 100 hrs on the open class machine.

[@ericbaxter864]

So you never showed removal of rear wheel...

[@joshtjohnson1]

what brand of chain is this?

[@DirtBikeChannel]

+josh johnson Primary Drive.

[@MaxRay16]

What is your experience with Primary Drive chains? I've read a few reviews about some people having the rollers snap and break, and other reviews about it working fine for long miles. I'm looking for a new chain for my KTM because I just picked up 17" supermoto wheels yesterday.

[@collinluvsbikes]

nice vid

[@dbkate2780]

Good video :) Are you guys out of Nevada?

[@DirtBikeChannel]

+DBKate Yes, I'm "out" of Nevada. Out of Nevada and in Utah :)

[@dbkate2780]

+Dirt Bike Channel That's awesome. I ride and make my videos in southern Nevada and some in Utah as well

[@smalltown6424]

How come you don't show how to remove rear tire..? First things first.

[@JohnDeTulio]

Hey what would be the best chain for trail riding. Non oring, oring, or xring. I have a worn out non oring right now but need to get new sprockets and chain soon. Thanks

[@BikeFreekShow]

Kyle, i just bought EXC500 2016 and its seems to me that 14/48 stock sprocket set isn't good for tight trials and deep sand! Can I go to 13/52 to improve and reduce wear on my clutch ?love your channel

[@ridendrive]

+BikeFreekShow If have a 16 500 exc the stock gearing should be 15/45. 14/48 is what im running for open desert and two track and it seems great. Id be cautious about running to short of gearing as the 500 exc has so much power that you want a bit longer gearing or you will be digging trenches up everything you want to climb. That's part of the 2-stroke desire, you can put the power down a lot easier and with a lighter package.

[@BikeFreekShow]

+Fluxx43 thnx... It's really 15/45 and its have no lower toque on deep sand and speed is to crazy for any track ... It's a 4 stroke . I'm considering 14/52 for deep sand and dirt climbs .

[@gmx0413]

@@BikeFreekShow I think they were saying you subconsciously desire a 2 stroke, I may be wrong

[@gmx0413]

@@BikeFreekShow And sorry I'm a little late on this one😂

[@aidannina494]

What kind of life is that I like it

[@popsandmannisgamingandlife1896]

love u guys

[@DirtBikeChannel]

+pops Gaming Thank you for the support.

[@popsandmannisgamingandlife1896]

+Dirt Bike Channel can you subscribe to me plz

[@spiffcats]

Lucky your parts are so cheap. My front was 70 bucks, rear was 100 and chain was 130.

[@anthonynewton4745]

You missed a massive step

[@AresROC]

Just cut my chain off then I saw the screwdriver trick...

[@bloodofjesus7able]

ALL THE GLORY HONOR PRAISES MY WORSHIP TO JESUS THE SON OF GOD

[@ItzFlaxy]

You can tell that this video is so sponsored. Hes like "i use the (brandname) tool for like every job he does. When you can do it with just normal tools yourself

[@bloodofjesus7able]

JESUS IS LORD HE OVERCOME THE WORLD HE IS RISEN AT RIGHT HAND THRONE OF GOD

[@dougiequick1]

What an absolutely retarded product name for a FINAL drive chain! A "primary drive" chain is like on Harley and Norton and many others the chain between the crank and clutch transmission ....ignorant name How about calling a line of tires "knobby tires" but they are street tires...that is how stupid "primary drive" is for a product name for a FINAL drive chain....someone probably already had that name so they just took advantage of something that sounds cool to the ignorant masses that know nothing about motorcycles in general....only one little segment

[@arrowv1]

Great job and I appreciate the information. If I may recommend one change... Please try to keep your videos to 7 minutes or less. Check out Casey Neistat's KZbin channel. He is big on the 7 minute videos.

[@DirtBikeChannel]

+Aaron Valdez KZbin prefers them to be longer. They rank videos by how long folks watch them.