Dirt bike / pit bike carburetor adjustment

[@popopopo6215]

Thank so much, very explanatory video. They only video that explains everything 😊

[@chrisbilling]

Best video explaining carbs ive seen

[@BoatMotors]

Thanks!

[@73macrino]

Great video my friend!! My kids pit bike was bogging out mid to high throttle and I adjusted the needle, now it runs like a beast again. Thank you sir for a well broke down video.

[@BoatMotors]

Thanks!

[@strongislandjetskis]

Best video ever

[@BoatMotors]

Thanks!

[@rickantonio]

Excellent I will use this for my students

[@joecoley4476]

fantastic video my friend

[@BoatMotors]

Thanks!

[@CamoPajamies]

Ok you will save my dirt bike & 10,000 others if you explain , how a dirty/faulty stator or unchecked valve clearance - causes 50% loss of power :( wheelies impossible ;( in a yz 426 running like crap 4 years. And last quick question for hardest part of stator removal Taking the stator nut off ;( should I put skrewdriver on cam teeth so it won’t turn engine backwards? Or in gear with a stick in spokes ;(

[@nicky2238]

Excuse me Sir, when choke is on, the butterfly should be open or closed?? I'm confused on the choke position 🤔🤔, please help...

[@BoatMotors]

When you are pulling choke lever you are putting it in position ON and butterfly is closed. Pushing the choke back is position OFF the butterfly is parallel to the air flow and have no air restriction.

[@nicky2238]

@@BoatMotors Thankyou so much sir 👍🏼👍🏼👍🏼

[@Bikebros27]

So my bike, if I pull full throttle quickly it’s bogs and stalls, if I pull it slowly it’s fine. What’s the best solution?

[@BoatMotors]

How long this is going on?

[@Bikebros27]

@@BoatMotors just started bike is new only had few hours run time.

[@BoatMotors]

@@Bikebros27 Try raising up the needle with one position

[@Bikebros27]

@@BoatMotors does the air mixture screw do anything to help with throttle. Or is that for idle only?

[@Bikebros27]

@@BoatMotors so adjusting the throttle and it seems that without the air filter on excess fuel is blowing out. And got serous back fire on de acceleration. Does that mean it’s to lean.

[@namir1782]

hi my pitbike is running rich but that i dont mind. what i dont like is that while leaned over and throttle momentarily closed , as i open and try to be smooth the throttle response is very snappy and upsets the whiole bike . will changing the base fuel/air mixture solve the trick (as there is a some black liquid on the exhausts i assume its running rich) or whill i need to change the idle needle ?

[@BoatMotors]

Start with the needle

[@joaogomes6940]

ótimo trabalho! video de facil compreensão, o video merecia estar mais exposto a todos os outros curiosos desta plataforma! abraço excelente video e dicção ;)

[@BoatMotors]

Obrigada!

[@bobythevex82]

Why does my new 2 strock engine starts spining the wheel without giving it throttle

[@BoatMotors]

If the bike is raised and the rear wheel is free and the engine is running, it is normal for the wheel to move slightly. The reason for this is the oil in the transmission that moves and engages the gears. This is normal.

[@bobythevex82]

@@BoatMotors but the wheel spin fast and the engine reves alot

[@BoatMotors]

Check and adjust throttle cable

[@AuRecoveryAndExplorations]

Excellent!!!!!

[@drewt.4353]

As a complete beginner i appreciate your time but when you switched the diagram 180 degrees on the pumper carb you confused the viewer.

[@IvanKisenyi-n1i]

If u want the fuel to be low

[@BoatMotors]

Adjust the floater

[@motolifegamer4206]

My 4stroke dirtbike runs fine in idle and first gear but the rest it will lose power with medium and high throttle

[@kenmartin2454]

Sounds like getting too much air in

[@motolifegamer4206]

@Ken Martin probably i put a new port into it but i just use it to mess with

[@kenmartin2454]

@@motolifegamer4206dont know what you mean by port

[@motolifegamer4206]

@@kenmartin2454 the plastic tube in a subwoofer box

[@kenmartin2454]

@@motolifegamer4206 what does that have to do with a dirtbike? Like use it as a fuel wire?

[@Fixitall-ib6nc]

Cables don’t push

[@BoatMotors]

Thanks!