Dirtbike tire change on 5 gallon bucket.

[@jude.v25]

Can't get bored if you're interested in learning! Thanks for sharing knowledge.

[@phantomshtter]

Damn man, busted knuckles, bled for us and everything. Thanks a boatload, every other video is on fancy stands or some special gizmo involved... I got a bucket and nice set of spoons, now I'm ready to try my first tire change.👍

[@deleaton4523]

Dude, this video helped me a ton. Wasted a lot of time with other approaches, but this was the best. Thank you. Del

[@bud176]

Glad it helped!

[@garyhoward2490]

Yeah!! I do the same thing! I put about 6 inches of concrete, in the bottom of my bucket so it doesn't slide around, and is more stable.

[@bud176]

That, is a fantastic idea!!!

[@BrianDoherty-e8s]

quick and dirty yet very thorough. nice that you sprinkled in the powder so the tube will settle in and not chafe. thank you hoss for not drowning the video in "music." i am going to nominate you for the tutorial hall of fame!

[@bud176]

🙌✊️

[@uarbor70]

I don't know why I am obsessed with tire changing Videos lol I don't even have a dirt bike. Although when I had my KLR I used to the zip tie method to change the tires. This ensures that both beads are down in the well and you pry them both off together

[@JaKobi_Allen]

😂😂😂

[@JaKobi_Allen]

Always best to know more tho ya never know

[@callowaygolf6564]

Nice clear instructional video! Good for us new DB riders!

[@chandran8602]

If the tool was more lengthy the work was more easy.

[@dahatchery]

I’ve been doing it the hard way for years. Thanks for the tip.

[@bud176]

So glad it helped

[@AJC-jo3ds]

would it be easier to get that tube in there with a bit of air in it

[@RayzGarage]

Great job. I'm saving this video

[@johnscribb6731]

Real man's tire change video. Not the clean, shop version with all the expensive tools working on a skinny front tire!

[@bud176]

Thank you Thank you!! We love to help.

[@thegameeeeeee8666]

Wow very clear and precise. Was going to buy a wheel changer. Think will invest in some tire paste and try that! Great help

[@chandran8602]

it would have been Easier if you applied some soap oil or grease.

[@jesusmontoya9879]

Awesome video, thank you for the tips and tricks!!

[@bud176]

Happy to help!

[@coastint]

Good job attempting to change my rear tube on crf 450x

[@goldmx1229]

Saw lot of professional videos but this is the only one Im saving. Thanks for sharing.

[@bud176]

So glad you like it.

[@goldmx1229]

@@bud176 💪🏻💪🏻

[@dianmotorchannel2705]

Nice, good job, good luck from Indonesia

[@chiuyujen1]

I really like you video, make me learn and happy.

[@kevinronan1393]

just curious but have you ever had issues with bending spokes using a bucket

[@bud176]

I can't say I've experienced any spoke bending ever during a tire change. I go pretty slow and take small bites so usually not much tension on rim or spokes.

[@merrellwilliams9500]

Excellent video. Only thing i would like to know is which side of the urine do you use?

[@bud176]

Urine?? Not sure maybe both :)

[@Dylansupraharris]

your faster than the dude with the 400 dollar tire changer

[@bud176]

I felt pressured to perform haha so people won't get bored. Thanks :)

[@kscott8464]

Sweet. Thanks. You're good at this.

[@bud176]

I have had a little practice over the 40 years of riding :):):) I hope youre having a great summer!!

[@Meanderthal61]

old skool. nice job.

[@bud176]

Thank ya very much! :)

[@drewsimicich1019]

Dont both sides of tire have to be in drop center? Because if not the opposite side is still on shoulder i try to squeeze bottom and top at dame time

[@bud176]

We do one side at a time but yes you sure can squeeze both sides in there. It takes a little more strength that way. :)

[@MofoMoto941]

Awesome vid bud. Still not as good as you but your tips make it able to do.

[@bud176]

Practice and patience buddy 👍

[@jondavies4027]

Spot on , fantastic video.

[@bud176]

Many thanks! I love to help.

[@mubshirshah6061]

Every time I do this, I keep putting a hole in my tooth. What am I doing wrong?

[@bud176]

Tooth?

[@lithiumbizkit]

Great video, only thing i'd add is using some rim protectors if you care about your finish!

[@kevinfox7825]

I like the bucket idea

[@bud176]

Yes sir cheap and yo can find them everywhere :)

[@timothyhine2258]

Good job sir, thanks.

[@bud176]

Welcome! 👍💪

[@Jspana55]

Great video! Now show us how to do a mini!!

[@bud176]

I'm on it. Minis are the toughest but still very doable buddy.

[@angusshull6106]

Great vid. Thanks

[@bud176]

Very welcome

[@nnoffuture]

On the edge of my seat

[@nicnadu0515]

I can’t get my tire started on the wheel

[@bud176]

Hook the lip on the rim lock to help keep it in place buddy.

[@nicnadu0515]

@@bud176 I figured it out 7 months ago 😂 thanks

[@pedromonteiroenduro]

Amazing 👏👏👏

[@bud176]

Thank you! 😊

[@thefacelessone74]

I only have a 4 gallon and 6 gallon bucket..

[@bud176]

:) :) :)

[@Dirtyfish_22]

Do it that quick ona 10”er.

[@bud176]

10" are tough no doubt. :) we do 50 or so a year. They take the same technique just a lot slower with way more lube.

[@erikeggenbakstad]

Or, do it that quick on an old tyre that is glued to the rim 😂

[@bud176]

When they seem glued to the rim just use your tire spoon carefully pry down under the bead right at a knobby and help push it down. Sometimes ya have to pick 3 different spots to pry on.

[@he478]

I can not even get the first step done

[@bud176]

You can do it!! You can do it all night LOOOng :) :) It takes a little practice and patience buddy.

[@he478]

@@bud176 I figured it out. It turns out I was fighting a tu-bliss system that I didn't know was installed since it was a mystery bike.

[@bud176]

@he478 those are a completely different animal. Glad you got it straightened out. Now we can go ride!!

[@tonsta1703]

why cant any of these videos show them removing a crusty old worn out tyre, they always remove a nice soft, flexable ne tyre, of course it looks easy, because it is

[@bud176]

I will have to try that one next time. We love to help! The trick to old crusty tires is using the paste after getting the old bead pried down to lube it up. I hear you on those being harder and agree 💯. Putting the paste between tire and rim will help it glide right off.

[@petebusch9069]

Or you could just use a proper tool. Why put yourself through this?

[@bud176]

This is just an option for affordability buddy. We have a changing stand as well. I just wanted to show some options. :)

[@ДмитрийВадимовичЖуравлев]

Очень не профессионально Долго, падьцы все ободраны. Надо подучиться

[@zackiaryruddick701]

Why take out the core of the stem ??

[@rocknral]

To get all of the air out. Much easier with a tube that is completely drained. Put the valve back in when completely empty to prevent air from bellowing back in.

[@bud176]

Exactly sir